Used Otec for sale (13,325)

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 150E/140207, Disc finishing machine for high-gloss polishing, deburring and fine grinding of non-ferrous metals, jewelry, titanium, steel alloys and reduction of orange peel formation. Polishing and grinding granulates are used for dry processing. Guodperwl Ngefx Ag Nsh PLEASE NOTE: The machine is not suitable for wet processing! It only works in dry processing. Prepayment Transportation not included

Condition: ready for operation (used), Two Machines Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Specs on Flake Purifier+ C 512 HR Color Sorter Refurbished in 2021 Technical Data Throughput up to (kg/h) Up to 3.8 Suitable grain sizes 2 - 20 mm Power (max. KVA) 3.4 Temperature range +5"C to + 40"C Weight 1300 to 1500 kg Electrical connection Power connection cable 5x4 mm2 Electric fuse 16 A Protection class IP 54 Rated current (max. A) 5 Specs on Flake Purifier+ N 1024 Sesotec Polymer sorter Technical Specifications • Working width: 1024 mm • Nozzle grid / valve spacing: 3.2 mm • Number of valves: 160 high-speed air-eject nozzles • Detection resolution: 2 mm (optical) / 16 mm (metal) • Metal detection sensitivity: Fe ≈ 0.6 mm | Al ≈ 0.1 mm • Throughput capacity: up to 3 – 3.8 t/h (depending on material and sensor setup) Gsdpfxsxlknme Ag Nouh • Sorting technology: CCD color camera + metal detector (“CM” configuration) • Particle size range: 2 – 20 mm • Separation method: Compressed-air blast via precision valve array • Enclosure rating: IP 54 • Power requirement: ≈ 3.4 kVA | 230 V, 50 Hz • Operating temperature: +5 °C to +40 °C • Purity achievable: up to 99.999 % (depending on configuration) • Control system: Touch-screen interface with VISUTEC software (optional remote monitoring via VISUDESK) • Modular design: Expandable to include NIR sensor (“N”) or additional sorting modules

Condition: like new (used), Debotec A-50 mixer Serial: 1215 Gedpfxoilhyae Ag Neuh Stainless 50Kg mixer, tipping bowl to discharge,

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. System described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Guedpsw U A Hbefx Ag Neh Full documentation for equipment available.

Condition: used, Year of construction: 2011, Sewing machine with inline end sheet tipper Meccanotecnica Universe Year: 2011 For high quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Sheet feeding, creasing, folding and collating and stitching. The UNIVERSE performs 2 operations: Nipping and end sheet gluing. Configuration: • flat sheet feeder • pc Siemens with touchscreen • GigaLynx sheet control • folding and collating station • thread sewing machine • belt delivery • transfer to the end sheet feeder • nipping press Gusdpfx Aou Utzyeg Neh • end sheet feeder with Hotmelt nozzle gluing and ROBATECH premelter • belt delivery (counter approx. 9.700.000 mio. stitches) Technical specifications: speed plano sheet feeder: up to 300 plano sheet(A4)/min mechanical stitching speed: up to 50 folded sheets/min size range plano sheet max.: 420 x 640 mm size range plano sheet min.: 150 x 200 mm size range folded sheet max.: 420 x 320 mm size range folded sheet min.: 150 x 100 mm number of stitches max.: 10

Condition: used, This listing is for the Pendotech PMAT3 Pressure Mat Sensor Monitor The unit is in full working condition and is ready for immediate use Gsdoxhfq Iopfx Ag Nouh The PendoTECH PressureMAT (PMA23/PMAT) is a dedicated pressure monitor, alarm, and transmitter designed specifically for use with PendoTECH’s single-use pressure sensors in biopharmaceutical and laboratory environments. Here's a breakdown of its key functions and features: What It Does Monitor: Displays real-time pressure readings (range from approximately –7 to 75 psi, or corresponding bar values) on a user-friendly backlit LCD for applications such as filtration, chromatography, and bioreactor pressure monitoring Alarm: Users can configure minimum and maximum pressure set-points. If readings fall outside these thresholds, the device triggers alarms—via on-screen warnings, audio alerts, and relay outputs to control external pumps or valves Transmitter: Delivers analog output signals (4–20 mA) and RS‑232 data outputs for integration into process control systems or PCs. Optional internal data logging may also be available Models & Capabilities Standard Units: Versions available for 1 to 4 pressure sensor inputs. High-Resolution (HR): Tailored for low-pressure applications, offering up to 10× better precision PLUS Series: More advanced models (e.g., PMAT2P, PMAT3P) support additional functionalities like flow meter inputs and total flow measurement, plus external analog input and broader integration options

Condition: ready for operation (used), Year of construction: 2016, Additional Equipment Gas-Kit Light: Control of external supplied compressed air with max. flow rate 150 l/min with max. 10 bar / Water Cooling Preparation: Additional parts to connect an external cooler This Trotec Speedy 360 was manufactured in 2016. It features a working area of 813 x 508 mm and a multifunctional table concept with a programmable Z-axis. The machine offers a maximum processing speed of 355 cm/s and is equipped with brushless DC servo motors. It supports Ethernet connectivity and includes InPack Technology™ for dust protection. Ideal for detailed engraving work. Contact us for more information about this machine. Guodpew I H Ddefx Ag Nsh Application Types Other Sheet Metal Machinery

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Gujdou Th S Sopfx Ag Noh Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The can press was completely overhauled in our workshop. The press is in a very good condition and is sold with the 12 months OBM parts warranty. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), functionality: fully functional, ESD-PROTECT TOM 8600 TERA Ohmmeter ESD Test Set LIKE NEW: - For measuring surface and resistance to ground, as well as humidity and temperature measurement - 2 measuring electrodes ME10 - Electrostatic Field Meter EFM 823 - HV Charger CPS 822 - Like new from 2023 (used once) - Original price: €2,900 net plus VAT Guodpfxjw Ebh Ho Ag Njh - Accessories as pictured - Supplied in a lockable transport case Shipping available for an additional €23.90. #8303

Year of construction: 2023, condition: ready for operation (used), Sorting machine (sorter) for fine material, 320 valves, few operating hours, still assembled and can be tested with your material. Gujdpfsxmvnbox Ag Nsh

Year of construction: 2005, condition: used, Sewing line Meccanotecnica Multiplex SA Year: 2005 Consisting of Gathering machine: Raccoglitrice-MX - Colour monitor - Hand feeding station: 2 - Number of gathering stations: 6 - Optical sheet control - Pump(s) - Distribution unit: Cassettiera - Distribution section into the sewing machine Gedpfsvuzfrjx Ag Neuh Sewing machine (1) Meccanotecnica Aster 180/42 Year: 2005 - Pre-loader - Feeder - Optical sheet control: Opticontrol - 4 + 4 opening possibilities - Plus stacker - Roller table delivery

Condition: used, This listing is for the Isotech IPS 303DD Power Supply The unit is in full working condition and is ready for immediate use Description For sale is a used Isotech IPS 303DD DC Bench Power Supply, a reliable and accurate unit ideal for electronics testing, lab work, or educational environments. This model features precise voltage and current control, dual digital displays, and fine/coarse adjustment knobs for both voltage and current, offering versatility and ease of use in any bench setup. Gedpfxsxhfqhs Ag Njuh Key Features Output Voltage: 0 – 30 V DC Output Current: 0 – 3 A Dual LED Display: Simultaneous voltage and current readout Adjustable coarse and fine controls Constant Voltage (CV) / Constant Current (CC) operation Overload and short circuit protection 4mm safety binding posts for secure connections Internal fan cooling for thermal management Ideal For Electronics hobbyists and repair professionals Engineering and science students Workshops, makerspaces, and test labs

Condition: excellent (used), Drip tray made of steel Manufacturer: Protecto Type RBW 22/1000 Collection volume 1000 liters Year of construction 2001 Gujdpfx Agjwr T Ace Nsh Material 1.0037 Length 2180 mm Depth 1310 mm Internal height 355 mm Total height 465 mm 2 pieces available

Condition: used, Year of construction: 2020, The shredder breaks large, bulky pieces made of Styrofoam and EPS and similar materials with a maximum raw density of 30kg/m³ into small pieces. The shredder reduces the volume by around 65%. This makes the machine ideal for use in industrial and craft companies as well as for wholesale and retail trade with Styrofoam packaging material. Throughput: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Sieve 50 mm: approx. 23 m³/h Depending on the sieve set, the volume can be reduced by 3:1 just by shredding your Styrofoam residues. Custom-made products are available on request. Gusdpfx Ajxm T I Seg Njh VAT is shown separately on the invoice. Shipping included throughout Germany, islands with surcharge. If you have any questions, please feel free to contact us.

Year of construction: 2018, condition: ready for operation (used), Various machines for sole assembly, heating, activation, pressing, and cooling of soles for the shoe manufacturing industry are available. 1) Cooling tunnel Elettrotecnica 491 PS, year of manufacture: 2017, temperature range: 0°C-10°C, belt width: 400mm, machine dimensions X/Y/Z: approx. 1150mm/800mm/1600mm, weight: approx. 250kg. 2) 3x sole activation units Elettrotecnica 0133 OP, year of manufacture: 2004, activation temperature range: 50°C-120°C, working area X/Y: 300mm/400mm, machine dimensions X/Y/Z: approx. 600mm/700mm/1300mm, weight: approx. 150kg. 3) 3x sole presses Elettrotecnica 160, years of manufacture: 2013/2014, pressing force: approx. 800kg, pressing time: 30s, machine dimensions X/Y/Z: approx. 1000mm/800mm/1500mm, weight: approx. 320kg. 4) Heat-Setter Mollina & Bianci CS 90 TS, year of manufacture: 2013, temperature range: 50°C-150°C, max. belt speed: 5m/s, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 350kg. 5) Cooling tunnel Elettrotecnica 488 PS, year of manufacture: 2014, min. temperature: 5°C, machine dimensions X/Y/Z: approx. 1100mm/800mm/1600mm, weight: approx. 250kg. 6) Heat-Setter International 5840, year of manufacture: 2015, temperature range: 60°C-180°C, machine dimensions X/Y/Z: approx. 1350mm/950mm/1550mm, weight: approx. 350kg. An on-site inspection is possible. Guedpfxexnp Rxe Ag Neh

Condition: used, Pneumatic pick & place manipulator, loading unit similar to SCARA robot. Handling device, handling system, placement gripper, loading gripper for automation. Horizontal axis with guided cylinder linear module type CLM 100-H100 (GEMOTEC column module). Vertical axis with guided cylinder linear module type CLM 100-H50 (GEMOTEC column module). Payload: max. 2 kg Horizontal stroke: 100 mm (pneumatic) Gusdpfx Ajxf Ur Aog Noh Vertical stroke: 50 mm (pneumatic) Vertical adjustment on both support columns: 330 mm (manual, with clamping) Support columns, vertical guide column: Ø 55 mm Mounting base: 175 x 90 mm - Pneumatically traversable in two axes with precise linear guidance - End position dampers - Mounting plate for tool attachment 55 x 65 mm Required space (L x W x H): 320 x 170 x 550 mm Net weight: 16 kg Very good condition Various manipulators available, see our webshop.

Condition: excellent (used), Part-turn actuator, pneumatic cylinder, rotary vane actuator, swivel module -Manufacturer: Rotech, TCR module for rotary actuator unused -Type: TCR3MVAZ -Number: 2x module available -Price: per piece -Dimensions: 160/70/H105 mm -Weight: 0.4 kg/piece Gsdpoxbzt Eofx Ag Njuh

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding turntable KT 300 Horizontal load 300 KG, tilted 150 KG Power consumption 220V, 50 Hz Table diameter 450mm Height 500mm Gjdpjc Ug Tlofx Ag Nsuh Infinitely variable tilt range via crank gear motor 0 - 90° Speed 0.3 to 2.5 rpm Incl. foot remote control Surcharge: Quick-release jaw chuck Diameter 300mm, 450.-€

Condition: used, Year of construction: 2018, functionality: fully functional, X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ±110° C-axis: ±360° Control unit: Heidenhain TNC 640 with HR 520 handwheel Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with transverse T-slots at 250 mm intervals Max load: 1,000 kg evenly distributed across the entire surface 2-axis milling head ST8 Spindle power: 15 kW Spindle speed: max. 24,000 rpm Torque: 20.9 Nm Tool holder: HSK 63F Tool release: pneumatic Guedpfxsxm Tv Aj Ag Njh Blow air: external Linear axis drives Feed rate X and Y axes: up to 60 m/min Feed rate Z axis: up to 40 m/min Accuracies Positioning accuracy: 0.10 mm Repeatability: 0.05 mm Colour Enclosure, gantry, control cabinet: light grey Z-carriage and milling head: blue Additional equipment - 15-position tool changer - Oriented milling spindle (e.g. for thread cutting) - Direct path measuring system on all 5 axes - Double-sided enclosure - Heidenhain TT140 (optional, at extra cost) - Heidenhain TS260 (optional, at extra cost) - 3D machine model (optional, at extra cost) Machine condition Fully functional, immediately available, still under power until November 2025

Year of construction: 2016, condition: ready for operation (used), Various sewing and joining machines for upper finishing in the shoe manufacturing industry are available. 1) Plastic and leather welding machine Pfaff 8304-04247, year of manufacture: 1999, max. temperature: 700°C, max. welding speed: 20m/min, machine dimensions X/Y/Z: approx. 1150mm/750mm/1400mm, weight: approx. 130kg. 2) Heel closing ironing machine Elettrotecnica 443/V, year of manufacture: 2013, max. temperature: 180°C, heating time: 30s, machine dimensions X/Y/Z: approx. 1000mm/600mm/1350mm, weight: approx. 180kg. 3) Repair sewing machine Global SR 9929, year of manufacture: 2012, max. sewing speed: 2000stitches/min, max. stitch length: 8mm, presser foot lift: 14mm. 4) Flat ironing press Global WJ-62, year of manufacture: 2016, max. temperature: 200°C, heating time: 60s, working area X/Y: 380mm/380mm, weight: approx. 60kg. 5) Overlock machine Pfaff 918-49, needle: 1, threads: 3, stitch length range: 1mm-4mm, presser foot lift: 10mm, max. sewing speed: 4000stitches/min. 6) 2x rotary table ironing machines Sabal M 108-A, year of manufacture: 2014, max. temperature: 180°C, machine dimensions X/Y/Z: approx. 1000mm/800mm/1500mm, weight: approx. 300kg. 7) Strobel machine Strobel KL141-23, sewing system: single-needle chainstitch, stitch length range: 3.5mm-7mm, max. sewing speed: 1800stitches/min, weight: approx. 50kg. An on-site inspection is possible. Gujdjxnp R Eopfx Ag Njh

Year of construction: 2022, condition: as good as new (ex-display), Welding rotary table Protec KT 1200 Kg Motor infinitely variable swivel and speed adjustable Motor 0,75 KW with remote control Guedpfscrmyfex Ag Neh Foot switch Table diameter 1200mm height 1000mm length 1400mm width 1500mm Speed from 0,05 to 0,5 rpm

Condition: new, Year of construction: 2025, The shredder breaks large, bulky pieces made of Styrofoam and EPS and similar materials with a maximum raw density of 30kg/m³ into small pieces. The shredder reduces the volume by around 65%. This makes the machine ideal for use in industrial and craft companies as well as for wholesale and retail trade with Styrofoam packaging material. Throughput: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Sieve 50 mm: approx. 23 m³/h Depending on the sieve set, the volume can be reduced by 3:1 just by shredding your Styrofoam residues. Custom-made products are available on request. Guedpfx Agoxlzkrj Njh VAT is shown separately on the invoice. Shipping included throughout Germany, islands with surcharge. If you have any questions, please feel free to contact us.

Condition: as good as new (ex-display), 600 Kg load capacity welding rotary table adjustable in height with plate diameter 1000mm height min. 0,65m, max. 1,530m speed from 0,01 - 1,1 rpm inclination up to 135 hand and foot remote control with speed indicator very robust Gjdpfod D D Hlsx Ag Neuh

Year of construction: 2015, condition: used, container turning device, welding table, welding turntable, roller block 1000 Kg load capacity Gujdpfec Ny H Aex Ag Njh with foot remote control Speed infinitely variable 80 to 1600 mm / min. Diameter 20mm to 700mm

Condition: good (used), Welding turntable KT 300 Load horizontal 300 KG, tilted 150 KG Power consumption 220V, 50 Hz table diameter 450mm height 500mm Tilt range stepless via crank gear motor 0 - 90°. speed 0,3 - 2,5 rpm Incl. foot remote control Surcharge: Quick release - jaw chuck Guodpjb Dymhjfx Ag Noh diameter 300mm, 450.-€