Used Overhead Travelling Crane for sale (15,185)

Condition: excellent (used), Year of construction: 2008, overall weight: 86,000 kg, total height: 2,300 mm, total length: 31,820 mm, total width: 4,500 mm, load capacity: 120,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Little used / Under power / Direct availebel Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Hoist trolley:5/20 M/Min Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Weight: 86000kg Gksdsxmf R Sspfx Akhod Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2025, operating hours: 55 h, load capacity: 990 kg, arm reach: 4,200 mm, TECHNICAL DETAILS Load capacity: max. 990 kg (depending on the outreach and load chart) Hook height: max. 4.90 m Lateral reach: max. 4.20 m (with manual extension) Lifting capacity: max. 600 kg Working angle of the crane jib: -30° to +70° Swivel angle of the crane jib: ±25° Swivel speed: 2.5 kNm MACHINE DETAILS Gksdj Ahm Iuepfx Akhed Operating voltage of the electric motor: 220 V Travel speed: 2.6 km/h Gradeability: max. 25° Operating pressure at the control block: max. 190 bar Hydraulic oil tank volume: 8 l Operating hours: 55 h EQUIPMENT Track chassis Winch for single-rope pulling Electric motor Manual jib extension

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH241-14/433886, operating hours: 131 h, ABUS ELV crane system crane runway bridge crane indoor crane crane Load capacity / lifting capacity: 5t - 5000 kg Gauge: 13,500 mm, overall width approx. 13,700 mm Year built: 1999, with floor control Lifting height: 6 m Overall height from crane top edge to hook approx. 1,020 mm (Girder: 540 mm + lifting gear: 480 mm) End carriage length with buffers approx. 270 cm SWP: Full load hours used: 131, theoretical remaining service life: 1,469 hours Gjdpfjx Ev Tkox Akhokd Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipment by freight forwarding possible, please inquire with postal code Collection preferred

Condition: excellent (used), functionality: fully functional, DEMAG Crane Overhead System KBKII-R crane system Workshop crane Overhead traveling crane Gedpov Uvdpjfx Akhokd Original price: over €40,000.00 Includes left-hand switch item no. 87396344 (alone, original net price €11,000.00) 6x 6m straight sections 2x 5m 4x 2m 3x 1.5m (Total of 60 running meters of straight rail with integrated, internal busbar – no festoon cable required!) 2x 90-degree curve KBKII-R Supplied with all necessary parts such as trolleys, suspension hangers, clamps, etc. Option: 4x DEMAG electric chain hoist PK5 N-F 500kg, 2 speeds (included with system but not binding), very good condition. System in inspected condition with inspection logbook, fully functional and ready to use immediately. Info: Over 20,000 DEMAG spare parts in stock! Please also check out my other available inventory offers!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, total length: 8,635 mm, load capacity: 5,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: single-girder – Capacity: 5,000 kg – Lifting height: 6 m Gksdezi Thwopfx Akhjd – Year of manufacture: 2006 – Hoist type: wire rope hoist – FEM/ISO hoist: 2m Dimensions – Span: 8,635 mm center-to-center – Overall length: 8,785 mm – Installation height: 900 mm – Width of wheel set including bumpers: 2,400 mm – Width of wheel set excluding bumpers: 2,200 mm – Wheelbase: 1,900 mm – Suitable for crane rail: 50×30 mm – Dead weight: approx. 2,075 kg Speeds – Hoisting: 5/0.8 m/min (2 speeds) – Trolley travel: 20/5 m/min (2 speeds) – Crane travel: 40/10 m/min (2 speeds) Features – Control: wired control panel; radio control optional – Crane manual available: yes, newly prepared – Electrical diagram available: yes – Condition: in good condition, dismantled but in working order – Dismantled: yes, available immediately

Condition: new, functionality: fully functional, Year of construction: 2025, 4 double-girder overhead cranes, in new condition rated load: 2 x 6.3 tons span: 16,560 mm lifting height: 6 m lifting speed: 5 and 0.8 m/min trolley travel speed: 2 - 20 m/min crane travel speed: 3.2 - 32 m/min radio-controlled remote control (tandem operation between the cranes) year of manufacture: 2025 voltage: 400V Godez Hmglopfx Akhokd

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: KA28 - 14/796737, ABUS overhead crane, crane runway, bridge crane, workshop crane, overhead travelling crane Godpsw Hnvtofx Akhskd Equipped with ABUS technology Load capacity / lifting capacity 1.6 t - 1,600 kg Span 9,550 mm, external dimension approx. 9,700 mm Year of manufacture 1998, floor control and scale included Crane is equipped with super fine lifting – speed 0.08–0.8 / 5 m/min Lifting height 6 m Hoist: GM816 L6-204.41.064.E Overall height from top edge of crane to hook approx. 710 mm (320 mm beam + 390 mm hoist) End carriage length without buffers approx. 150 cm Optionally, 2 x 40 m HEA240 crane rails available Crane is dismantled and immediately available Very good condition, inspection logbook available Column slewing cranes and wall-mounted slewing cranes are also available Demag KBK and ABUS HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder possible, please inquire with zip code Collection preferred

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, overall weight: 11,800 kg, total length: 16,700 mm, load capacity: 10,000 kg, working height: 11,350 mm, lifting height: 11,350 mm, Equipment: documentation/manual, Demag overhead crane – Type: double-girder – Capacity: 2 x 5,000 kg – Lifting height: 11.35 m – Year of manufacture: 2021 – Hoist type: wire rope hoists – FEM/ISO hoists: 2m / M5 – Manufacturer: Demag / Siempelkamp Dimensions – Span: 16,700 mm (center-to-center) – Total length: 17,000 mm – Installation height: 1,600 mm – Width: 3,860 mm – Wheelbase: 3,150 mm – Suitable for crane rail: A55 / 50 x 30 mm – Net weight: 11,800 kg Speeds – Hoisting: 8/1.3 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Features – Control: radio control – Crane manual available: yes – Electrical diagrams available: yes – Condition: in very good condition – Disassembled: yes, available immediately – Excluding rotating carousel Gjdpfjyvr Huox Akhjkd

Condition: like new (used), functionality: fully functional, Year of construction: 2022, total width: 17,000 mm, load capacity: 3,200 kg, working height: 6,130 mm, Equipment: documentation/manual, JASO overhead traveling crane (monorail), 3.2-ton capacity, 17-meter span. Manufactured in 2022 – like new, very low usage. FEM M4 duty group. Complete with EC Declaration of Conformity. Available for inspection in Zaragoza, Spain. Contact us by email for technical inquiries or to schedule a visit. Details: Gedpfx Ajz Hl H Dokhskd Brand: JASO Model/Type: AX32H1041S040C4 Serial Number: 57086 Year of Manufacture: 2022 Load Capacity: 3,200 kg Span: 17,000 mm FEM/ISO Group: M4 Lifting Height: 6.13 m (approx.) Documentation: EC Declaration of Conformity available Location: Zaragoza, Spain

Condition: like new (used), functionality: fully functional, Year of construction: 2022, overall weight: 10,000 kg, total length: 17,000 mm, load capacity: 10,000 kg, working height: 5,950 mm, Equipment: documentation/manual, JASO overhead traveling crane (monorail), 10-ton capacity, 17m span. Manufactured in 2022 – in like-new condition, with very low usage. FEM M4 duty group. Complete with EC Declaration of Conformity. Available for inspection in Zaragoza, Spain. Contact us by email for technical questions or to arrange a visit. Details: Gkjdez Hl Ibepfx Akhed Brand: JASO Model/Type: CX100H1041S050C4 Serial number: 57085 Year of manufacture: 2022 Load capacity: 10,000 kg Span: 17,000 mm FEM/ISO group: M4 Lifting height: 5.95 m (approx.) Documentation: EC Declaration of Conformity available Location: Zaragoza, Spain

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: 112781, overall weight: 8,000 kg, total height: 1,300 mm, total length: 24,300 mm, total width: 4,000 mm, load capacity: 6,300 kg, working height: 8,000 mm, Equipment: documentation/manual, Konecranes 6,300 KG single-girder overhead crane. - Span: 24,160 mm center-to-center. - Lifting capacity: 6,300 KG - Lifting height: 8 m - Year of construction: 1998 - Control: wired - Crane manual: available Delivery, customization, installation, inspection, and commissioning are all possible upon request. If this crane is not exactly what you are looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all of our inventory is listed online. Please call or email us if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes Gkjdsz Rmm Ijpfx Akhjd - Column and jib cranes - Chain hoists - Demag KBK rails and accessories - Traveling cables Keywords: overhead crane, hall crane, Abus, Demag, Kone, Konecranes, Stahl

Condition: ready for operation (used), Year of construction: 2017, Demag KBK overhead crane, crane system, crane, suspended monorail, suspended crane, chain hoist, Cologne Inspection report available! Manufacturer: Demag Load capacity: 500 kg Year of manufacture: 2017 Double crossbeam: approx. 7 m Longitudinal rail: approx. 2.90 m Gauge: approx. 5.33 Chain hoist: Manufacturer: Demag Type: DC-COM 5-500 1/1 H4 V4.5/1.1 Year of manufacture: 2017 Load capacity: 500 kg Fine lift: 1.10 m/min Main lift: 4.5 m/min Hook travel: 4 m Gods Agndtspfx Akhokd You are welcome to visit us for an inspection. We can also arrange cost-effective transport for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: like new (used), Year of construction: 2019, machine/vehicle number: DN-EDL-2500KG, Abus EDL overhead crane, bridge crane, crane system, hall crane, portal crane, suspended crane system Payload: 2500 kg Width: approx. 11.5 m, track gauge: approx. 10.5 m Includes wireless remote control Lifting height/hook travel: 6 m Connection: 400 V, 16 A Year of manufacture: 2019 Very good condition, almost new. See pictures. Shipping via freight forwarder, collection preferred. Location: 75053 Gondelsheim Gsdpfx Akezv Elushokd Please inquire about shipping costs based on your postal code; we will provide you with an immediate and non-binding offer!

Condition: ready for operation (used), Year of construction: 2015, Demag KBK overhead crane, crane system, crane, chain hoist Crane manual and inspection report available! Manufacturer: Abus Load capacity: 1600 kg Year of manufacture: 2015 Length: 5.85 m Width: 5.5 m Outreach/span: 5480 mm Wheel diameter: 63 mm Trolley gauge: 850 mm Trolley weight: 150 kg Crane girder profile: HB 250 Chain hoist: Manufacturer: Abus Type: GM 6 1600.6-2 Year of manufacture: 2015 Load capacity: 1600 kg Fine lift: 1.50 m/min Main lift: 6.0 m/min Hook travel: 3 m Dimensions: Height to bottom of hook: 2.20 m Height to bottom of carriage: 2.15 m Support structure: Height: 2.84 m Width: 5.86 m Length: 6.0 m The height of the support structure can be adjusted. Gkjdpfxo Agfvde Akhsd You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2020, Abus overhead crane, crane gantry, crane, suspended track, suspended crane, chain hoist, Berlin Manufacturer: Abus Load capacity: 500 kg Year of manufacture: 1991, 2020, 2020 Double crossbeam Berlin 3: approx. 6.60 m (year of manufacture 1991), center track gauge Crossbeam Berlin 2: approx. 6.60 m (year of manufacture 2020), center track gauge Crossbeam Berlin 1: approx. 6.60 m (year of manufacture 2020), center track gauge Longitudinal rail: approx. 40.20 m Chain hoists: 3 units Manufacturer: Abus Load capacity: 500 kg Hook travel: 4 m You are welcome to visit us for an inspection. We will gladly arrange cost-effective transportation for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Gsdpfx Akj Ah Sykohokd Deviations in technical data and errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: DN3486 / 3482, ABUS HB overhead crane system with dimensions of approximately 7x6m (6m span) The crane is available in two units! – Extension of the runway rails is possible! Load capacity / lifting capacity: 500 KG - 0.5 tons Gkodpfjzvrcgex Akhod Technical data of the system: Crane system consisting of ABUS HB160 rails The system is delivered complete: HB rails, rail connectors, trolleys, travel drives, end plates, supports/hangers, etc. Includes 500KG ABUS chain hoist - lifting height approximately 4m The crane is dismantled and immediately available Used condition, see images The item is located in 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125KG - 1600KG Please request a non-binding quote for your overhead crane system, specifying the load capacity and dimensions.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, load capacity: 4,000 kg, power: 5.1 kW (6.93 HP), main lifting speed: 4,800 mm/min, fine lifting speed: 580 mm/s, working height: 6,000 mm, Equipment: documentation/manual, --- The price applies to both trolley hoists --- 2x Konecranes CXT single-rail trolley hoist (without support beam) for single-girder bridge crane, wire rope tandem set incl. radio control & control cabinet (year of manufacture 2018) Original new price at the time: approx. 40,000 Euros/NET For sale is a high-quality, complete tandem electric wire rope hoist set from premium manufacturer Konecranes, model CXT30410020A35FALOS (ALMOST NEW). The system was used in an industrial setting and was professionally dismantled in the summer of 2022 as part of the closure of the Ettlinger Weberei (as can be seen in the documents). As the wire rope was renewed shortly before the dismantling on June 22, 2022, according to the available factory certificate, the installed ropes are practically new. All documents, test books and wiring diagrams are available in the original Konecranes folder. Technical data (per hoist/trolley): Manufacturer: Konecranes Model: CXT30410020A35FALOS Design: Single-rail trolley hoist / under-flange runner (single-girder bridge crane / monorail) Flange width of support beam: 180 mm Year of manufacture: 01/2018 Load capacity: 2x 2,000 kg (2.0t) Lifting height: 6.0 m Duty cycle class: M5 (FEM 2m) – very robust industrial design Lifting speed: 4.80 / 0.58 m/min (main and fine lifting) Trolley speed: 20.0 m/min Operating voltage: 400 V / 3~ / 50 Hz (control voltage 48 V) Gjdpfoz D I Hhjx Akhskd Lifting motor: 2.25 kW (S3-60% ED) | Drive motor: 0.3 kW Protection class: IP55 Extensive accessories & equipment: HBC-radiomatic radio remote control: Yellow handheld transmitter with selector switch for tandem operation (Crane I / I+II / II) incl. HBC receiver. Batteries are fully charged. SICK reflective light barrier (WL280-2R4331): Integrated collision protection for the safe parallel operation of both trolleys. Complete electrical system: Including central crane control cabinet (Siemens components) and AKAPP cable line connections. Like-new hoisting ropes: Renewed on June 22, 2022 (as can be seen in the documents) and hardly used due to the subsequent shutdown. Complete documentation: Original folder with test books, operating instructions for lifting gear/drive/radio control, spare parts catalog, wiring diagrams and software CD. Special features & highlights: Tandem operation (HBC radio control): Control of trolley I, trolley II or both synchronously via a transmitter on a main girder – ideal for long goods without skewing. Collision protection: SICK reflective light barriers prevent unwanted collisions. Fine lifting & soft start: 2-stage lifting motor (4.8 / 0.58 m/min) for millimeter-precise positioning. Minimal hook drift: Due to a special drum geometry, the hook travels almost exactly vertically – almost without lateral displacement when lifting/lowering. Long service life: CXT design for maximum hook height; industrial class FEM 2m / ISO M5. Including original Konecranes weather & impact protection: Solid protective covers to protect the trolley hoists. Condition & safety note: The devices ran flawlessly until they were dismantled in 2022 and are securely lashed to pallets. Acceptance before recommissioning is the responsibility of the buyer. Collection & transport: Self-collection preferred (forklift for loading available on site). Alternatively, shipping via a freight forwarder at extra cost.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, load capacity: 2,500 kg, For sale are two overhead crane systems by Konecranes. The systems are in excellent condition and have been regularly serviced. Technical Data: - Span: 18.6 m - Crane lifting capacity: 2,500 kg - Lifting height: 3.79 m - Year of manufacture: 2000 and 2006 - Lifting speed: 5.0 / 0.83 m/min (2-speed) - Trolley travel speed: 20 m/min (infinitely variable) - Crane travel speed: 25 m/min (infinitely variable) - Runway length: 18 m MACHINE DETAILS: - Trolley weight: 211 kg - Crane weight without trolley: 1,761 kg - Rails: only 50 m available in total for both systems EQUIPMENT: - Radio remote control with push-button/master switch - Mobile pendant as emergency control - Overload protection and load data logger - Limit switches for crane and trolley travel (approach and end limits) - Signal horn, charging station, and spare battery - Main conductor line (make: Akapp, 50A, length: 18 m) - Includes main switch and mounting brackets (clamped version) The offer is made for one system only, unless a combined offer for both is explicitly requested. Gksdpfx Ajykbbiekhed Transport and loading can be organized at an additional cost. Europe-wide delivery available. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2019, Demag KBK overhead crane, crane system, crane, chain hoist Inspection report available! Manufacturer: Demag Load capacity: 1000 kg Year of manufacture: 2019 Length: approx. 24 m Width: approx. 5.90 m Track gauge: approx. 5.70 m Chain hoist: Manufacturer: Demag Type: DC-Com 10 1000 1/1 H4 Year of manufacture: 2019 Load capacity: 1000 kg Fine lifting speed: 1 m/min Gedpj Ah Rtxefx Akhjkd Main lifting speed: 4 m/min Hook travel: 4 m You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Demag KBK overhead crane, crane system, suspended track, chain hoist, Frankfurt Inspection report available! Manufacturer: Demag Load capacity: 1000 kg Year of manufacture: 2012 Double cross traverse: approx. 7 m Longitudinal rail: approx. 5 m Center distance of rails: approx. 6.75 m Chain hoist: Manufacturer: Demag Type: DC-COM 10-1000 1/1 H4 V4/1 Gksdpe Agrvcofx Akhed Year of manufacture: 2020 Load capacity: 1000 kg Fine lifting speed: 1 m/min Main lifting speed: 4 m/min Hook travel: 4 m You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2021, load capacity: 1,000 kg, Abus EHB overhead crane, crane structure, crane, suspended monorail, chain hoist, Kiel, 1000 Kg Manufacturer: Abus Type: EHB-X Load capacity: 1000 Kg Gedpfx Akj Ai Hfkshjkd Year of manufacture: 2021 Double crossbeam: approx. 7.30m Longitudinal rail: approx. 4.50m Track gauge: approx. 4.80m Chain hoist: Manufacturer: Demag Type: DC-COM 10-1000 1/1 H4 V4/1 Year of manufacture: 2020 Load capacity: 1000 Kg Fine lifting speed: 1 m/min Main lifting speed: 4 m/min Hook travel: 4 m You are welcome to come and inspect the equipment. We would be happy to arrange cost-effective transportation for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the product description may occur and are subject to change.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, load capacity: 6,300 kg, For sale is a nearly new overhead crane system from Konecranes. The crane is the CXTS model (single-girder bridge crane / profile girder) and is in excellent condition. ATTENTION: The crane shown in the listing photos has already been sold. However, an identical model is still available, but will not be ready for delivery until the end of 2026. TECHNICAL DETAILS - Capacity: 6,300 kg - Span: 18,600 mm - Lifting height: 6.00 m - Year of manufacture: 2020 Gjdpfxeykbims Akhjkd - Lifting speed: 4.0 / 0.7 m/min (2-speed) - Trolley travel speed: 20.0 m/min (stepless) - Crane travel speed: 32.0 m/min (stepless) MACHINE DETAILS - Weights: Trolley weight: 440 kg; Crane weight without trolley: 1,832 kg - Classification: Crane Class: S3 (DIN 15018); Hoist mechanism group: FEM 2m (ISO M5), Crane drive group: FEM 1Am (ISO M4) - Electrical data: Power supply: 400 V / 48 V / 50 Hz, Rated power: 4.9 kW EQUIPMENT - Radio remote control with push-button transmitter - Additional mobile pendant control (emergency control) - Overload protection and load data memory - Pre-limit and end-limit switches for crane and trolley travel - Signal horn, charging station, and spare battery - Hook collision protection Transport dimensions of the bridge: - Total length: 19,328 mm - Profile height of girder: 622 mm - End carriage width (wheel base): 2,200 mm Transport and loading can be organised across Europe at additional cost if required. Prices excl. VAT Inspection by prior appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Trading - Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For more information or to contact us, please visit our website.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: DN-HB160-250KG, ABUS HB overhead crane system with dimensions of approximately 19 x 4 m (4 m span) Extending the runway rails is possible! Gksdpfxjzv Ea So Akhjd Load capacity / lifting capacity: 250 kg - 0.25 tons - increasing the load capacity up to 1000 kg is possible! Technical data of the system: Crane system with ABUS HB160 rails The system is delivered complete: HB rails, rail connectors, carriages, travel drive in the span, end plates, supports/hangers, etc. Including a 250 kg ABUS chain hoist - lifting height approximately 4 m The crane is disassembled and immediately available. Used condition, see pictures. The item is located in 75053 Gondelsheim. Shipping via freight forwarder or collection by appointment only. Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity: 125 kg - 1600 kg. Please request a non-binding quote for your crane system, specifying the load capacity and dimensions.

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: HN-ALU, DEMAG ALUMINUM overhead crane, span approximately 3x2m Load capacity / lever load: 500 KG - 0.5 tons Technical data of the system: Crane track made of Demag aluminum rails, 180mm The system is delivered complete: Rails, travel units, end plates, cable carrier, etc. Includes a 500kg Kito chain hoist. The crane is disassembled and immediately available. Very good condition, see pictures. The item is located in 75053 Gondelsheim. Shipping via freight forwarder or collection by appointment only. Gkedpfoz Tdftox Akhed Demag KBK1, KBK2 and KBK3 rails are in stock! Demag KBK systems are also available. Load capacity 125KG - 1600KG. Please inquire about your crane track with overhang load and dimensions.

Condition: used, functionality: fully functional, Year of construction: 2003, machine/vehicle number: 001669U, load capacity: 500 kg, For sale Used Demag single-girder overhead crane, 15,124 mm span x 500 kg capacity. Ref. 001669U * Stored indoors * Technically 100% in order and inspected All our new and used cranes, which we deliver installed, come with a warranty! We can optionally supply our cranes including: * Adjustments in length and/or height and, if required, repainting * Power rail / conductor bar system * Radio control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment Gsdpjzrthijfx Akhokd In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment, cranes, universal crane, hoist. Overhead crane, overhead traveling crane. Single-girder, single beam. Chain hoist.