Used Palet Racking for sale (3,511)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Dcsdpfx Aasmhhyajaof Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Dedpfx Aod Tqaljaascf Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg Dcodpfx Aajh Ek Daeaef - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Dedefdkb Uepfx Aaaocf - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. Dsdpfx Aajmhhf Seascf When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Dodpfjmhhl Hjx Aaaecf Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Dcsdomidyfspfx Aaaef Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm Dedpsmkixwsfx Aaaecf 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Dcjdpefdkbhsfx Aaajf - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Dedsqt Dmyopfx Aaascf Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Händi P3 consisting of 78 galvanized uprights (480 cm x 105 cm) and 253 grey beams (270 cm x 10 cm). Of these, 11 uprights are slightly damaged. Robering SLP SL consisting of 53 uprights (400 and 450 cm x 110 cm) and 266 orange beams (270 cm x 11 cm). Dcsdpeywd Rnjfx Aaaef For sale only as a complete package.

Condition: good (used), Technical data for the pallet rack beam: Racking system: SSI Schäfer Type: PR 600 Dedpfx Ajynlraeaascf Included in the scope of delivery: 01x pallet rack beam, used Material color: yellow Box profile: 60 x 40 mm Beam type: TRV1-270-064-30 CE Clear span: 2,700 mm Bracket: 5 HK (hooks) 02x safety pins, used Design: fully galvanized For securing the cross beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping is desired, additional costs will apply. These can be requested from us separately depending on the delivery location and scope of delivery.

Condition: good (used), Tool cabinet system consisting of two rows: Dedpfxeyvkato Aaajcf 1st row: length approx. 10 m – height approx. 2.50 m 2nd row: length approx. 9 m – height approx. 2.50 m or 3 m (2 elements) Drawer/pull-out width: 65 cm Consisting of a total of 27 cabinet elements

Condition: like new (used), Year of construction: 2019, functionality: fully functional, load capacity per storage section: 2,200 kg, support length: 2,700 mm, frame width: 1,100 mm, 257 linear meters of pallet racking by manufacturer Tegometall, model CI70/80. Excellent condition, manufactured in 2019. Inspected annually and serviced as needed. The offer includes: 93 uprights 6m x 110cm (height x depth) and 552 beams 270cm, as well as locking pins. This results in up to 1,104 Euro pallet slots and approximately 257 linear meters of racking. Bay load 8.5t and shelf load 2,200kg. Partial quantities possible – just ask. Dcedpfx Aoyw N Skoaaef Price is net plus VAT. The racking is already professionally dismantled and in stock, so it is immediately available. Europe-wide delivery by freight forwarding available for an extra charge.

Condition: like new (used), Cantilevered construction for long goods. Profiles are made of solid IPE steel. Single-sided rack with 6 supports and 24 arms 6 sets available Price: €5,000 per set Length per arm: 1,500 mm Dodpfx Aajyu S Afjaecf Load per arm (IPE 140): 1,500 kg Load per upright (IPE 270): 6,000 kg

Condition: like new (used), Cantilevered construction for long goods. Profiles are made of solid IPE steel. Djdpfxoyiat Ej Aaaocf Double-sided rack with 6 supports and 48 arms 3 sets available Price: €7,500 per set Length per arm: 1,500 mm Load per arm (IPE 140): 1,500 kg Load per upright (IPE 270): 6,000 kg

Condition: good (used), Technical data for pallet rack beam: Racking system: Jungheinrich Type: MPB Scope of delivery includes: 01x Pallet rack beam, used Material color: RAL 1007 Daffodil Yellow Box profile: 80 x 50 mm Beam type: AUF'B'H0488 Design: End beam Bracket: 4 HK (hooks) Clear width: 1,350 mm 02x Locking pins, used Finish: Fully galvanized For securing the cross beams To prevent unintentional lifting Note: Suitable for accommodating horizontal braces. Your contacts in our company: Mr. Andre Evering Dedpeymlt Ijfx Aaaocf Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any transportation or shipping of the item is subject to additional costs, which can be requested from us separately depending on the place of delivery and/or scope of delivery.

Year of construction: 2026, condition: like new (used), Big bag frame with crossbeam for forklift / crane Djdpfx Asyvzuneaaecf

Condition: good (used), Technical data for the pallet rack beam: Racking system manufacturer: Jungheinrich Type: MPB Scope of delivery includes: 01x Pallet rack beam, used Material color: RAL 1007 Daffodil Yellow Box profile: 80 x 50 mm Beam type: AUF'B'E0488 Connector: 4 HK (hooks) Clear span: 2,700 mm Dcjdpfeymdaaex Aaaof Maximum load per pair of beams: 1,600 kg, with evenly distributed load. 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams To prevent unintentional removal Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Should additional transport or shipping be required, this will incur extra costs, which can be provided separately depending on the delivery location and scope. Please contact us for a quote.

Condition: good (used), Technical Specifications for Pallet Rack Beam: Racking System: Jungheinrich Type: MPB Included in delivery: 01x Pallet rack beam, used Color: RAL 1007 Daffodil Yellow Box profile: 125 x 50 mm Beam type: AUF'B'E 0485|15 Connector: 4 HK (hooks) Dcedpfxoyl Tygo Aaasf Clear width: 2,700 mm 02x Safety pins, new Design: fully galvanized For securing the crossbeams Protection against unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Transportation or shipping of this item is possible at additional cost, which can be quoted separately depending on the delivery location and scope of delivery.

Condition: good (used), Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights, pallet racking crossbeams, pallet racking rungs, shelf support, pallet support, support rungs, spacer -Rungs: for pallet racking, shelf support, spacer -Shelf depth: 1100 mm -Overall dimensions: 1105/70/H45 mm -Number: 670 rungs available -Price: per piece, minimum order 10 pieces. -Overall dimensions: 1105/70/H45 mm Dedexakxhspfx Aaaocf -Weight: 3.4 kg/pc.

Condition: good (used), Technical Specifications for Pallet Rack Beam: Racking System: Jungheinrich Type: MPB Included in delivery: 01x Pallet rack beam, used Color: RAL 1007 Daffodil Yellow Box profile: 125 x 50 mm Beam type: AUF'B'E 0485|15 Connector: 4 HK (hooks) Clear width: 2,700 mm 02x Safety pins, new Design: fully galvanized For securing the crossbeams Protection against unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Dcjdpfxoylx Naj Aaaef This item is offered for pickup only. Transportation or shipping of this item is possible at additional cost, which can be quoted separately depending on the delivery location and scope of delivery.

Condition: good (used), Technical specifications for the side panel: Shelving system: SSI Schäfer Type: R 3000 Included in the scope of delivery: 01x mesh side panel, used Material color: light silver lacquered for frame depth: 600 mm for frame height: 2,490 mm Item: SWG 3625 Dimensions: 2,485 x 450 mm Mesh size: approx. 50 x 50 mm Note: Mounting brackets are not included in the scope of delivery. Dcsdpfoylt Udox Aaaef Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General product information: This item is offered only for collection. Should transport or shipping of this item be required, additional costs will apply. Please contact us to inquire about delivery costs, which vary depending on delivery location or scope of order.

Condition: good (used), Gemac shelving system type Normafix, approx. 1000 meters available Size 131 x 120 x 230 cm Uprights powder coated blue Shelves galvanized Clear shelf width 1310 mm Shelf depth 1200 mm Shelf height 2300 mm Dcsdpfxegxpqpo Aaasf 7 shelves each shelf load 200 KG Bay load 1400 KG approx 750 pieces available The price refers to 13,10 meter 22 uprights 70 shelves incl. securing and fastening devices

Condition: new, Technical data for pallet rack beam: Racking system: Jungheinrich Type: MPB Scope of delivery includes: 01x pallet rack beam, new Material color: RAL 1007 daffodil yellow Box profile: 140 x 50 mm Beam type: AUF'B'E0444 Connector: 4 HK (hooks) Clear width: 2,700 mm 02x safety pins, new Design: fully galvanized For securing the longitudinal beams Dsdpfeyla R Sjx Aaajcf Prevents unintentional lifting out Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Further transport or shipment of this item can be arranged at additional cost, which can be requested from us depending on the place of delivery or scope of delivery.