Used Pallet Blocks for sale (9,276)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Dedpszquqcofx Aggskt Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: used, Year of construction: 2022, machine/vehicle number: 102003026, overall weight: 341 kg, load capacity: 600 kg, protection type (IP code): IP52, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 600 kg Max. speed: 2 m/s Protection rating: IP52 MACHINE DETAILS Dimensions & Weight Transport dimensions (L × W × H): approx. 1,380 × 1,000 × 1,180 mm Weight: approx. 341 kg The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the auction ends. Dkjdpfx Agezwn S Togst

Condition: good (used), Year of construction: 2012, operating hours: 2,187 h, load capacity: 1,800 kg, fuel type: electric, empty load weight: 500 kg, mileage: 2,187 km, Electric pallet truck for block pallets Brand: Atlet Year of manufacture: 2012 Capacity: 1,800 kg 2,187 operating hours Well-maintained battery Automatic filling system External charger Dedpfxjy R Agus Aggokt

Condition: like new (used), Year of construction: 2020, operating hours: 37 h, load capacity: 1,300 kg, fuel type: electric, empty load weight: 200 kg, mileage: 37 km, Electric BREEDGAOOR pallet truck from the Jungheinrich brand from 2020 is as good as new; ONLY 37 hours on the clock; Very compact and weighs only 200 kg; Forks BLOCK pallet format; Capacity is 1,300 kg; Equipped with a LION battery with INTERNAL charger; Order the pallet truck in our webshop or make an appointment for a test drive Djdpfx Aewv Hlroggskt

Condition: used, machine/vehicle number: 425130268, Year of construction: 2016, operating hours: 813 h, load capacity: 1,000 kg, fork length: 1,150 mm, empty load weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! Auction of two Jungheinrich EPL 110 (manufactured in 2016 & 2015) The 2015 unit is defective and will be sold as a source of spare parts! TECHNICAL DETAILS Lifting capacity: 1,000 kg Fork length: 1,150 mm MACHINE DETAILS Dkjdpfxozwpcte Aggjt Battery voltage: 24 V Battery capacity: 85 Ah Dimensions & Weight Dimensions (L x W x H): 1,600 x 800 x 1,940 mm Self-weight: 500 kg Serial number, unit 1: 425130268 Operating hours, unit 1: 813 h UVV certificate, unit 1: 04/2026 EQUIPMENT Integrated battery charger The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: ready for operation (used), functionality: fully functional, Delta TTA 550 pallet block cutter Operating Dkodpfxezkt R Ue Aggst

Condition: used, Year of construction: 2000, functionality: fully functional, production capacity: 520 unit/h, Remaining part of the advertisement: We offer for sale a complete, fully functional production line designed for the manufacture of pallet supports from wood shavings. The line is currently in operation at a production facility and remains in continuous operation, allowing potential buyers to view it during the actual production process. Item for sale: A technological line used for the production of pallet supports molded from wood shavings and a binder, used in the production of transport and industrial pallets. Key advantages: • High repeatability of dimensions and product quality • Stable and proven production technology • Possibility of multi-shift operation • Low proportion of manual labor in the process • Ready for continued operation without the need for lengthy downtime. Technical condition: The line is currently in use and maintained in operational condition. All key equipment remains in good technical condition and is regularly serviced. This allows potential buyers to: • View the line in operation • Assess the quality of the produced supports • Verify the process efficiency under real production conditions • Familiarize themselves with the organization of the technological process. Scope of sale: The offered line includes the equipment necessary to conduct the production process, including, among others: • Raw material preparation system • Material dosing system • Forming and pressing equipment Dkedjzt Iypspfx Aggjt • Technological transport systems • Control and automation system • Auxiliary equipment related to the pallet support production process. A detailed technical specification will be made available to interested parties. Possibility of presentation: It is possible to arrange a technical visit to the facility and view the line during normal production. Upon request, we provide additional technical information, photos, and video materials. Sales conditions: Location: Gorczenica Delivery date: to be agreed Form of sale: complete production line For further information or to arrange a presentation, please contact us: Contact person: We invite you to contact us and view the line during production. Thanks to the possibility of a "live" presentation, the buyer can accurately assess the technical condition of the equipment and the efficiency of the entire technological process.

Year of construction: 2017, condition: used, REF: MM6447 1 x Camline Palletising Systems Ltd cartesian automated palletiser. The palletiser automates the stacking process of products and goods that can otherwise be labour intensive and expensive, putting undue stress on workers. Cartesian or ‘Pick and Place’ palletisers are characterised by the structural beams and axes which are used to ‘pick and place’ the items. They are very flexible machines and can move products in three directions, thus being used to create complex pallet patterns. Typically, one or two (sometimes more) products are collated on an infeed conveyor and collected with a gripping device, which then places them on to the pallet. Manufacturer – Camline Palletising Systems Ltd. Model – Compact Palletising System. Date of manufacture – 2017. Entry via conveyor and exit via manual removal of the pallet. Dkodpfx Aozbkl Seggst Electrical requirements - 220 V / 50 hz / 1 phase. Power - 32 Amps. Air pressure - 6 Bar. Overall dimensions - 2m wide x 2.7m deep x 4.4m high (approx.).

Condition: good (used), Year of construction: 1999, load capacity: 1,600 kg, lifting height: 2,900 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, empty load weight: 1,300 kg, Received in trade-in Electric stacker Brand: BT Year: 1999 BLOCK PALLETS: outer fork width 68 cm Capacity: 1,600 kg Lifting height: 2,900 mm Dkodpfx Aeyc Eygogget Drive-through height: 2,000 mm Battery: maintenance-free GEL with charger Watch the video on YouTube

Year of construction: 2023, condition: ready for operation (used), WHEEL CUTTING MACHINE FOR PALLET BLOCKS. MACHINE WORKING ON OCCASION. MINIMUM 50X50mm MAXIMUM 150X150mm Dksdpfxsk Nf S Re Aggjt

Condition: used, Year of construction: 2020, functionality: unexamined, Zhengzhou A/X Machinery Sawdust Block Moulding Plant comprising: Dedpfx Aozx Tg Eoggokt 3 lines each comprising: Zhengzhou A/X Machinery Line 1 RY-J-2 twin channel 33kw sawdust wood pallet block moulder Fuye 80119 350mm chop saw Senhuan Y-100-2 3kw chop saw

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 7525SE-0949-FA, measuring range X-axis: 2,600 mm, number of axes: 7, TECHNICAL DETAILS Axes: 7 Measuring range: 2.6 m Accuracy Acceptance temperature: 20 °C Humidity during acceptance: 50 % Permissible single-point deviation: 0.028 mm Determined single-point deviation: 0.010 mm Maximum permissible volumetric length measuring deviation: ± 0.039 mm Determined volumetric length measuring deviation: -0.018 mm Scanner Manufacturer: Hexagon Model: CMS108 Integration: Calibrated within the measuring arm Note: Can be used on the measuring arm with appropriate scanning software Note: Scanning software not included in the scope of delivery MACHINE DETAILS Design: Portable measuring system Weight of measuring system including transport case: approx. 40 kg External dimensions of transport case for measuring arm: approx. 1,350 x 550 x 350 mm Dimensions of tripod: approx. 750 x 750 x 750 mm Weight of tripod: approx. 75 kg Dimensions of scanner case: approx. 600 x 450 x 220 mm Weight of scanner including carrying case: approx. 6 kg Notebook size: 17 inches Note: The measuring arm was relabeled before the last calibration. EQUIPMENT - Hexagon ROMER Absolute Arm RA-7525SE measuring arm, 7-axis - Mobility Pack FP2-1503-FA with wireless computer connection - Transport case for measuring arm - Magnetic base Dsdpfx Agezv Rhusgokt - Test bar, length 700 mm - Test sphere, diameter 25 mm - Probe box with 3 probes - Probe with ruby ball, diameter 6 mm - Probe with ruby ball, diameter 3 mm - Calibration sphere, diameter 15 mm - Dust cover - Complete cable set - Calibration certificate for measuring arm, notebook Dell M6600 - PowerInspect 11 software including hardware dongle - Hexagon RDS software - Brunson 231 roll stand, height-adjustable - Height adjustment range of tripod: approx. 700 to 1,100 mm - Scanner Hexagon CMS108 - Carrying case for scanner - Calibration certificate for scanner Note: PowerInspect 11 is exclusively for tactile measurements and cannot be linked with a scanner. Note for packaging request: €250 for special pallet with cardboard construction and tripod on a Euro pallet.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Dsdpfx Aszqunheggokt Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Thickness min / max: 75 mm - 100 mm Specifications Operators | 0 Length | 7,5 m Width | 2,5 m Height | 1,8 m Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Dsdpfx Agewdutmjgekt Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 4,247 h, functionality: fully functional, machine/vehicle number: 655118, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 42,000 rpm, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 60 °, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between September 21st and October 1st! TECHNICAL DETAILS Travel range X-axis: 550 mm Travel range Y-axis: 400 mm Travel range Z-axis: 400 mm Swivel angle A-axis: -120° to +60° Swivel angle C-axis: n x 360° Distance from HSK-E tool holder to table: 450 mm Clamping area: 650 x 800 mm Pallet dimensions for 4th and 5th axes: approx. 300 x 300 mm Spindle Spindle mounting: HSK-E 40 Spindle speed: 0 to 42,000 rpm Spindle power S1: 15 kW Spindle power S6: 17 kW Dkodpfszquprox Aggjt Axes and Accuracy Drive type: Digital AC servo motors, fully synchronized Travel speed: max. 30 m/min Acceleration: max. 15 m/s² Repeatability: 0.002 mm Digital display: 0.001 mm or 0.0001 mm, selectable Nominal speed in NC axis operation A-axis: 40 min⁻¹ Nominal speed in NC axis operation C-axis: 40 min⁻¹ Tool Changer Type: Pick-up disc magazine Magazine slots: 32 MACHINE DETAILS Machine operating time: 484 d 11 h 24 min 06 s Spindle operating time: 4,246 h 55 min 36 s Type: 5-axis CNC machining center Connected load: 38 kVA Input voltage: 400 V AC, 3-phase, 50 Hz Control voltage: 24 V DC Fuses: max. 63 A Overall length: 3,300 mm Overall width: 2,200 mm Overall height: 2,300 mm Machine weight: 7,400 kg EQUIPMENT - Technical documentation and manual - Three spare pallets - HSK-E-40 tool holders - Pallets with attached specific fixtures External reference: Demo - Lot 1

Condition: good (used), Year of construction: 2002, functionality: fully functional, I sell a block machine for formatting scantlings into pallet blocks. Possible dimensions of blocks from 70 to 160. very good condition. Dkjdpsvbcl Hjfx Aggot

Condition: used, functionality: fully functional, total width: 8,000 mm, total height: 4,000 mm, total length: 70,000 mm, Pallet production line, Terwort, 17 seconds/pallet, completely modernized in 2023 Kallfass block saw Block switch Block buffer Terwort NM1 nailing machine Deck storage Deck gripper Storage 2 x star turners Terwort NM2 nailing machine Skid milling machine Clamping device Miter saw Branding station Forklift Outfeed conveyor Dedpfszp El Usx Aggokt

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Storti Nailing Line GSI/150-AL2 – pallet line The Storti GSI/150-AL2 pallet nailing line is designed for efficient pallet production. This robust industrial machine is suitable for automated pallet assembly, offering reliable performance and increased production capacity. Holtec Variocut VC-SHKA-HPI – cut-to-length saw / optimization line This industrial machine is designed for precise and efficient wood cutting. It is suitable for woodworking operations requiring reliable performance, high output, and accurate material cutting. Dsdpszgayusfx Aggekt

Year of construction: 2010, condition: excellent (used), Automatic pallet wrapper with film pre-stretching Inventory no. 3928 Manufacturer: ProtoWraptor Type: PLUS - IDP * Turntable positioning via fixed stop * Number of top and bottom wraps * Turntable diameter: 1650 mm !!!! * Max. wrapping height: approx. 2400 mm !! * Own weight: approx. 450 kg Djdpfx Asychv Dsggokt * Suitable for Euro pallets and block pallets!!! * Ramp!!! * In very good condition.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: 1032, FBH 1200 Machine Track gauge 1710 mm, equipped with rubber wheels Dkodpfx Agsyf Uazjget FBH 1200 mobile, fully automatic vibropress for the production of hollow blocks, bricks, as well as blocks. *Output / 8 hours / 100%: 12,000 pcs hollow blocks. The step-by-step production line for small-size precast elements manufactures various concrete components on a smooth concrete surface, typically outdoors. The machine moves automatically during production. Above the production area, a power supply system is installed to provide power to various devices. The step-by-step FBH 1200 vibropress is supplied with concrete via a feed hopper designed for use with a forklift truck. The manufactured components remain at the production site until dry. Production area: 1100 x 1050 mm Height of produced elements: up to 380 mm A palletizer can be purchased for an additional fee—see last two photos.

Condition: as good as new (ex-display), Year of construction: 2018, functionality: fully functional, number of previous owners: 1, Vector pallet production line with a Kuka block depalletizing robot. The line operates with 3 workers and produces approximately 2500 EPAL pallets per shift. The condition of the line is excellent, and it includes an automatic staple nailing system. Dsdpfxjvxlxds Aggekt

Condition: good (used), Year of construction: 1993, functionality: fully functional, Fully operational Coralli pallet production line with integrated wooden block cutting saws. This setup allows seamless production of EPAL pallets with wooden blocks. The line’s capacity is approximately 2000 pallets per shift. We have and pallet block feeder price 25000eur Dsdpfx Agsvx Hntogjkt

Condition: ready for operation (used), Year of construction: 1995, A complete stationary concrete block production plant Adler is available. Components: stationary block machine/press unit, mixer, skip/feeding unit, material hopper, conveyor belts, height conveyor, pallet circulation system, pallet transport, palletizer, stacking and destacking units, strapping system, control system, hydraulic unit, silo, material feeding system, dosing unit, discharge. Output: 1500 cycles/day, output: 3000 pallets/h, operation: double-pallet operation, available concrete block format X/Y/Z: 500mm/200mm/250mm. The drying racks are made of wood and can no longer be used. The system has not been operated for 20 years and requires an overhaul. The system was operated from 1995 to 2005. Documentation available. An on-site inspection is possible. The system is located in Portugal. Dkedpfx Agszh Ng Teget

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, Complete concrete block production line Manufacturer: Schlosser Control system completely renewed in 2019 Production of paving stones, grass pavers, etc. Drying unit Dksdpfxoy Sin Uo Aggst Palletizing system

Condition: good (used), Year of construction: 2009, functionality: fully functional, Complete Corali automatic pallet production line. The production line is ideal for example, to produce paper and cardboard pallets. The automatic setup for fast changeover enables top efficiency even with small production runs. Machine Is in use and operational. Facts about the line - Deck nailing unit - Leg nailing unit - Assembly unit Dkodpfx Agey Exvnegot - Foiling unit, 6 rolls - Ink printing unit - Fast change setting, change over time about 5 min. - Minimum production series up from 15 pcs - Capacity approximately 1800 pcs / shift - Pallet sizes min. 530x530mm, Max 1500x1250mm - Wooden blocks / two block cutting saws and convoyer - Compressed blocks can be loaded manually - Closed and open deck pallets - 2 operators - Corner cutting saw - Robot stacking, - Binding of the stack - Possibility to feed previously manufactured covers to the production line - Manuals both in written and as files - Year of manufacture 2009 The buyer will be responsible for dismantling and transporting the line at the agreed schedule. The line will be sold as a single wholeness.