Used Panel Shelf for sale (13,202)

Condition: like new (used), total length: 850 mm, total width: 150 mm, hole spacing: 780 mm, The scope of delivery includes: 01x corrugated steel panel, used Manufacturer: SSI Schäfer Material color: sendzimir galvanized for frame depth: 850 mm Total length: approx. 850 mm Total width: approx. 150 mm Total height: approx. 11 mm Center-center hole: approx. 780 mm Material thickness: approx. 1.3 mm Weight per piece: approx. 1.930 kg Your contact persons in our company: Guedpfx Agjqucn Uj Nsh Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 6x steel panels, used Manufacturer: SSI Schäfer Total depth: approx. 960 mm Inner depth: approx. 955 mm for stud depth: 950 mm Total width: approx. 300 mm Material thickness: approx. 2.50 mm Gsdpfx Asv R T Epog Nsuh Material color: Sendzimir galvanized Frame profile: approx. 300 x 40 x 20 mm Weight per piece: approx. 7.940 kg Your contact persons: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), The scope of delivery includes: 08x steel panel with support angle, used Manufacturer: SSI Schaefer material color: hot-dip galvanized total depth: approx. 960 mm for frame depth: approx. 950 mm total width: approx. 300 mm total height: approx. 50/40 mm contact surface: approx. 16 mm weight | pcs.: approx. 7,650 kg 01x steel panel end termination, used Manufacturer: SSI Schäfer material color: hot-dip galvanized total depth: approx. 960 mm for frame depth: approx. 950 mm total width: approx. 300 mm total height: approx. 50/40 mm weight | pcs.: approx. 7,830 kg Gjdeppt N Sopfx Ag Nouh Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Godpfoxnl Srex Ag Nsuh

Condition: ready for operation (used), Paneelpers met 2 verwarmde tafels Tafelafmetingen: 3200 x 1700 x 50 mm Tussen kolommen: 1700 mm Maximale afstand tussen tafels: 150 mm perssnelheid: 1,4 mm/sec Gedpfx Ajwaityog Nsuh retoursnelheid: 105 mm/sec sluitsnelheid: 105 mm/sec 6 zuigers - diameter van de zuiger: 200 mm - slag: 150 mm Gewicht: 19 ton Furnierpressen - Transportpers - Composietpers - Heizplattenpressen

Condition: used, functionality: fully functional, Simatic Multi Panel Touch Siemens Siemens MP 277 10-inch Touch Guodowg Tmdjpfx Ag Nsh 6AV6 643-0CD01-1Ax1 Made in Germany Stock: 2 units Condition: Used Price per unit External width: approx. 330 mm External depth: approx. 275 mm Internal width: approx. 305 mm Internal depth: approx. 245 mm Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system has been in operation until dismantling. Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods! We would be happy to provide you with a customized quote or advise you on design or installation issues. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of specialists. We have successfully implemented projects for companies in a wide range of industries, including logistics, the pharmaceutical industry, skilled trades, and the electronics sector. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or additional components such as picking racks or containers.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 021.06.440, cutting length (max.): 4,400 mm, main saw diameter: 380 mm, controller model: G-DRIVEAXS BASIC, working height: 1,050 mm, Equipment: scorer, TECHNICAL DETAILS Cutting length: 4,400 mm Cross-cutting machine width: 1,525 mm Saw blade protrusion: 105 mm Main blade diameter: 380 mm Scoring blade diameter: 180 mm Lift table dimensions: 4,400 mm × 1,600 mm Working height: 1,050 mm Minimum book height: 10 mm Minimum thickness when loading: 10 mm Minimum panel size when loading: 2,440 mm × 1,220 mm Maximum panel size when loading: 4,200 mm × 1,600 mm Maximum gripper opening: 110 mm Number of grippers for longitudinal stop: 5 Number of grippers for cross stop: 8 Feed speed of saw carriage: 5 to 100 m/min Feed speed of pushers: 1 to 40 m/min Return speed of pushers: 60 m/min MACHINE DETAILS Gusdpfjxf Eg Dex Ag Noh Control system: G-DRIVEAXS BASIC Main motor output: 18 Hp 13.2 kW Number of front aligners (longitudinal area): 3 Number of side aligners (crosswise, lower): 2 Number of side aligners on pressure beam: 2 EQUIPMENT Left-hand configuration Side conveyor belt for loading

Condition: used, Year of construction: 2024, New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice cream Fermentation, Sauces, Brewery industry, etc. Applications: - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products. - Cheese Production: Used before cheese-making to ensure safety. - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream. Gjdjxl N Nispfx Ag Njuh Advantages of Batch Pasteurisation: - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations. - Flexibility: Suitable for small batches or varied products and recipes. - Quality Control: Allows for greater control over the pasteurisation process. Capacity: 600 Litres Agitation: Upon Request Temperatures: 95 Degrees Max Heating: Via Heating Elements Self Heated Chart Recorder: Digital Chart Recorder Construction: Fully Stainless Steel Jacketed: Fully Insulated Thickness of Stainelss steel: 3 mm Outlet: DN 40 Top Cover: Open top cover with twin openings CIP: Spray ball Cooling: Circulation of cold water through the jacket Temperature Loss: 2 degrees Over 8 hours Temperature Regulation: Controller to Adjust Temperatures Safety Sensor: No water in jacket No Heating Available: Immediately Finance Available: Pay Monthly, Ask For A Quote

Condition: used, Year of construction: 2003, total height: 2,900 mm, total length: 5,100 mm, total width: 1,700 mm, Weight: 650 kg - Max. cutting height vertical [mm]: 2200 - Max. cutting width [mm]: 4300 - Min. saw blade diameter [mm]: 240 - Max. saw blade diameter [mm]: 250 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes Gsdpjxbhmlefx Ag Neuh - Vertical cutting: Yes - Year: 2003 - Documentation available: No - Serial number: 633/0-306 - Transport dimensions: 5100mm x 1700mm x 2900mm (l x w x h) - Transport weight [kg]: 650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Simatic Panel, Operator Panel, Machine Control, Interface Panel, Control Unit, Operating Panel, Keyboard, Control Panel Teachpendant -Manufacturer: B&R, control panel Operator Panel with signal column -Type: 4PPC70.0702-20B -Signal tower: Banner TL50HGWRQ -Transport dimensions: 1000/420/H180 mm -Weight: 13 kg Gjdpfx Agsxnix Ao Neuh

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: well-maintained Gedpfx Aexb Hf Hjg Njuh Cutting length: 4300 mm Cutting height: 2200 mm Cutting depth: 45 mm Motor: 3 kW Saw blade diameter: 220 mm with SuperCut scoring unit with automatic moving grid with complete length stop with strip stop Availability: short notice Location: Flörsheim

Condition: good (used), Note: The shelf is offered without firewood. The firewood is for decorative purposes only. Technical data for the firewood rack: Shelving system: Dexion Type: HI280 Assembly technical data: Number of shelving rows: 01 pcs. Shelf length: 1,380 mm Number of bays per shelving row: 01 pcs. Number of shelf panels incl. base level: 05 pcs. Scope of delivery includes: 02x upright frames, used Material color: Sendzimir galvanized Frame profile dimension: 50 x 55 mm Adjustment pitch: 25 mm incl. mesh walls Mesh size: 50 x 50 mm The frames are preassembled 2,000 mm high 800 mm deep 05x mesh deck panels, used Material color: hot-dip galvanized Total depth: approx. 782 mm (bearing bar direction) Total width: approx. 1,270 mm (cross bar direction) Bearing bar dim.: 20|1.80 mm Bearing: approx. 20 mm Frame height: approx. 20 mm Mesh size: 68 x 35 mm Weight / pc.: approx. 10.91 kg 04x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: Sendzimir galvanized 10x shelf supports, used Total length: 1,280 mm Z-profile: 50 x 25 mm Gjdpsxl A Irefx Ag Njuh Number of hooks: 02 pcs. Weight / pc.: approx. 0.84 kg Material color: Sendzimir galvanized 01x cross brace, used Material color: Sendzimir galvanized 01x load sign with specifications of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is only available for collection. Any transport or shipping beyond this will incur additional costs, which can be clarified individually depending on the delivery location or scope of supply.

Condition: used, machine/vehicle number: 008137, Max. panel width: 4400 mm Max. panel length: 3100 mm Gjdow R R Tzepfx Ag Neuh Main saw blade projection: 80 mm No of Grippers: 9

Condition: excellent (used), Year of construction: 1999, STRIEBIG III TRK scoring unit Gjdpfx Asvluwvjg Nsuh In wooden box Can be retrofitted to a Striebig Standard TRK Location: from stock 54634 Bitburg - available immediately -

Condition: used, Year of construction: 1998, total height: 2,250 mm, total length: 4,250 mm, total width: 1,150 mm, Weight: 850 kg - Max. cutting height vertical [mm]: 1550 - Max. cutting height horizontal [mm]: 1550 - Max. cutting width [mm]: 3200 - Max. saw blade diameter [mm]: 250 - Horizontal cutting: Yes - Vertical cutting: Yes - Year: 1998 - Documentation available: No - Serial number: 818081 - Transport dimensions: 4250mm x 1150mm x 2250mm (l x w x h) - Transport weight [kg]: 850kg - Transport packages [pcs.]: 1 Financial information Gujdpfexb Dbljx Ag Njh VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Note: The rack is offered without firewood. The firewood shown is for decorative purposes only. Technical Data for the Firewood Rack: Racking System: Dexion Type: HI280 Technical Data for Setup: Number of rack rows: 1 unit Rack length: 1,380 mm Number of bays per rack row: 1 unit Number of shelves incl. base level: 5 units Scope of Delivery Includes: 02x Upright frames, used Finish: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm Including mesh side panels Mesh size: 50 x 50 mm The frames are pre-assembled Height: 2,400 mm Depth: 800 mm Gedpoxlzlcefx Ag Nsuh 05x Mesh decking panels, used Finish: hot-dip galvanized Overall depth: approx. 782 mm (bearing bar direction) Overall width: approx. 1,270 mm (cross-bar direction) Bearing bar dimensions: 20|1.80 mm Support height: approx. 20 mm Frame height: approx. 20 mm Mesh size: 68 x 35 mm Weight per panel: approx. 10.91 kg 04x Shims, new Type: HI280 U-PL. STD 42X50X1.2 VZ Finish: Sendzimir galvanized 10x Shelf beams, used Total length: 1,280 mm Z-profile: 50 x 25 mm Number of hooks: 2 units Weight per beam: approx. 0.84 kg Finish: Sendzimir galvanized 01x Diagonal brace, used Finish: Sendzimir galvanized 01x Load capacity sign With information on bay and shelf loads, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General Information about the Item: This item is available for collection only. If transport or shipping is required beyond collection, this will incur additional costs, which can be requested separately depending on the delivery location and scope from us.

Condition: excellent (used), Year of construction: 2021, Automatic Panel Saw Putsch Meniconi Type: SVP 980 A ECO Automatic horizontal feed Automatic vertical feed Horizontal positioning control Welded frame with extremely high rigidity Pneumatically retractable support grid Stable locking of saw carriage at top and bottom Retractable splitter for cutouts Control panel at eye level Digital readout at longitudinal stop Lift roller transport system Scoring unit Edging support Dust extraction system TRK ECO version with pneumatic extraction channel control Touch screen Dustproofed Technical Data Vertical cutting height: 2,200 mm Gujdpewy H Tdjfx Ag Noh Horizontal cutting height: 2,100 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade diameter: 300 mm Extraction connection: 160 mm Width: 1,500 mm Height: 3,150 mm Length: 7,300 mm Motor power: 7.5 HP (5.5 kW) Motor voltage: 3 x 400 V Year of manufacture: 2021 Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1996, total height: 2,730 mm, total length: 5,550 mm, total width: 1,600 mm, Weight: 1.000 kg Panel saw Elcon 185 RSXL Maximum cutting width 4150mm Guodpewnhmzofx Ag Neh Maximum cutting height 1850mm Maximum cutting depth 80mm 3kW motor 4200 rpm Saw blade diameter 300mm Air pressure required 6 bar Machine dimensions: 5550 * 1600 * 2730mm (L * W * H) - Year: 1996 - Documentation available: Yes - Transport dimensions: 5550mm x 1600mm x 2730mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1992, Format circular saw Altendorf TKR 45, panel saw with scoring unit. Sliding table 1400 mm Main motor 5.5 kW Max. saw blade 350 mm Saw blade tilt and height adjustment hydraulically adjustable Gsdpfxsxllc Es Ag Neuh Cutting width right 1000 mm Scoring unit The machine is in good condition. Immediately available.

Condition: used, Year of construction: 1998, Vertical wall saw Elcon 185 RSL Max cutting height 1850mm Max cutting width 4150mm Built in 1998 Saw blade 250mm 380V 6 Amp 2.2kW Engine Gsdpfx Agewng Udo Neuh Saw horizontally and vertically Dimensions: 5050x1200x2540mm, 750kg - Year: 1998 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, Holzkraft Vertical Panel Saw VPS 2241 VR ED Fully equipped, precision panel saw Item number: 5600242 DESCRIPTION • Smooth and ergonomic operation • Scoring unit for chip-free cutting quality • Automatically retracting slat frame • Continuous central workpiece support • Two stops for dimensioning • Panels rest on movable rollers and can be positioned without lifting • Modular welded machine frame, torsion-resistant and self-supporting • Saw unit with chain guide and two control levers • Large opening for saw blade change TECHNICAL DATA General Information • Cutting height: 2200 mm • Cutting length: 4100 mm • Cutting depth: 60 mm • Saw blade diameter: 250 mm • Saw blade speed: 4800 rpm • Scoring blade diameter: 80 mm • Scoring blade speed: 8500 rpm • Number of stops: 2 • Sound pressure level: 89.2 dB(A) Guodpfx Agjw Aqaao Neh Dimensions and Weights • Max. height (product): 3100 mm • Approx. length (product): 5300 mm • Approx. width/depth (product): 1800 mm • Approx. height (product): 3000 mm • Approx. net weight: 600 kg Extraction Connection • Extraction port diameter: 100 mm • Minimum extraction air volume: 1000 m³/h • Minimum air speed: 20 m/s Electrical Data • Drive motor power: 3 kW • Connection voltage: 400 V • Mains frequency: 50 Hz SCOPE OF DELIVERY • Saw blade Ø 250 x 30 x 3.2 mm Z80 trapezoidal • Scoring blade Ø 80 x 2.8-3.6 mm Z20 EQUIPMENT FEATURES • Lower material support: metal rollers • Retractable slat frame: automatic • Vertical digital measuring display • Horizontal digital measuring display • Panel positioning: on movable rollers without lifting Location: ex works - Available at short notice - Subject to prior sale

Condition: new, Year of construction: 2024, Solid, self-supporting, firmly welded, torsion-resistant saw frame Sturdy, durable saw-bar steel construction Robust bearing of the motor carriage ensures high cutting precision Powerful, low-vibration 3.9 kW (5.3 hp) motor TRK dust extraction system Automatically deflecting aluminum slatted frame with plastic supports Device for wall mounting ball bearing support rollers divided center support at optimal working height, with aluminum grids integrated small parts support made of wood Supersilent sound insulation for the reduction of saw blade noise Electromagnetic motor brake Gedsihahbepfx Ag Neuh Weight of the saw approx. 910 kg Cutting depth 60 mm Saw motor power 3,9 kW (5,3 PS) saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 exhaust ports ø 100 mm Connected load 4,8 kW Mains connection 3 x 400 V / 50 Hz cutting range: L: 4600 ; Hvertical: 2200 mm , Hhorizontal: 2100 mm Equipment: - Compact 5220 - Scorer VSA stepless - Strip stop - Mech. braked support rollers - Free standing support compl. Location: Ex stock 54634 Bitburg - immediately available - Photo shows optional digital display, which is not in the on offer.

Condition: as good as new (ex-display), Year of construction: 2023, Striebig Evolution 5224 - Demonstration machine / Exhibition piece Machine if desired with cutting optimization OptiDivide with label printer and label layout EVOLUTION - Precision, ergonomics and functionality perfectly combined Automatic functions, such as automatic locking and swiveling or automatic and swiveling or the automatic insertion and removal of the saw unit, make your your daily work. You too can benefit from the advantages of an EVOLUTION. It can be controlled via a 12" touchscreen computer. The intuitive user interface ensures perfect processing of your orders in every detail. Comprehensive standard equipment 12" touchscreen computer with optimum operator guidance Laser-supported display of the horizontal cut Digital measuring system DMS-XY Automatic saw beam locking with interface detection Automatic locking and swiveling of the saw unit Automatic infeed and outfeed of the saw unit Automatic fine adjustment of the saw unit Operating hours counter Tool database Gujdpfevkp H Aex Ag Njh ALU center support over the entire machine length Integrated, powerful TRK dust extraction system. Dust limit value around 1mg/m³ Control cabinet attached directly to the saw frame Supersilent sound insulation Scoring unit: VSA scoring saw infinitely adjustable Complete free-standing support Complete aluminum small parts support UPS 24 VDC for Touch PC Uninterruptible power supply Weight of the saw approx. 1,100 kg Cutting depth 80 mm Saw motor power 5.5 kW (7.5 HP) Saw blade diameter 300 mm Saw blade bore 30 mm Emission sound pressure level at the workplace LpA 83 dB *3 Saw blade speed 4800 rpm 1 extraction nozzle ø 140 mm Compressed air connection 6-10 bar Connected load 7.5 kW Mains connection 3 x 400 V / 50 Hz Dimensions in mm: Type L H T1 free T2 wall 5224 5645 3018 1741 1361 Cutting range in mm: Type LS HS(vert) HS horizontal 5224 4300 2240 2100 Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2011, Machine Data Holzma HPP 380/43/43/R + Bargstedt TLF 210/10/05 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Guodpsxivbajfx Ag Noh Roller rail (2-track element): 11 units Technical Specifications: Saw blade projection: 95 mm Main saw motor: 18 kW Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Total connected load: 29 kW Power Control CADmatic 4.0 control with 17" flat display Grooving program, cut-out/and stress-relief cut program Labeling / labeling software / label printer PICA 108 Data interface for warehouse systems and optimization software Schnitt-Profit Professional Bargstedt Optimat TLF 210/10/05 Storage System Carrier length: 13.45 m Span approx. 12.5 m Rotary drive with 1* loading and 1* unloading station Maximum stack height in storage: 1700 mm Max. workpiece size: 4200 x 2070 mm Ex location - Immediately available - Inspection possible

Condition: new, Year of construction: 2025, Holzkraft Vertical Panel Saw VPS 22-51 VR ED Vertical panel saw with scoring unit, dust extraction and digital measurement display Article number: 5601252 DESCRIPTION Smooth and ergonomic operation Modular welded machine frame, torsion-resistant and self-supporting Scoring unit for tear-free cutting quality Automatic retraction of the support slats during cutting Continuous central workpiece support for maximum flexibility Easy switching between vertical and horizontal processing Gujdpfx Agew Aqage Njh Digital measuring stop Transport rollers can be raised via pedal for easy movement of heavy panels Durable and precise material support for stable workpiece positioning Pneumatic locking of the saw carriage Large opening for saw blade changes Integrated lateral dust extraction TECHNICAL DATA General Information Max. cutting height 2200 mm Max. cutting length 5100 mm Max. cutting depth 60 mm Saw blade diameter 250 mm Saw blade speed 4800 rpm Scoring blade diameter 80 mm Scoring blade speed 8500 rpm Stops 2 pcs. Sound pressure level 79.1 dB(A) Dimensions and Weight Length (product) approx. 6300 mm Width/Depth (product) approx. 1800 mm Height (product) approx. 3000 mm Net weight approx. 850 kg Extraction Connection Extraction port diameter 100 mm Min. air requirement for extraction 1800 m³/h Min. air speed 20 m/s Electrical Data Drive motor power 3 kW Connection voltage 400 V Mains frequency 50 Hz EQUIPMENT Features Lower material support metal rollers Retreating support slats automatic Vertical measurement display digital Horizontal measurement display digital Panel positioning manual Saw carriage locking pneumatic Location: Ex works - Available at short notice by arrangement -