Used Paper Bag Making for sale (11,959)

Condition: used, Year of construction: 2016, Ref:11045 . 2016 Dürselen PB 04 N Paper Drill Free standing 4 headed paper drill Tsdpfxex Nfp Ae Anlsb Equipped with: Four drilling heads with adjustable spacing. Pneumatic cooling and lubrication for drills. Automatic drilling cycle, foot pedal control. Waste directed to outer door Drill table with adjustment, front and side margins. Table lock is automatically released. Technical data: Diameter of the drill: 2-10 mm, Stack height: 60 mm.

Condition: excellent (used), Year of construction: 1985, Ref:11083 . 1985 COMO 220 MC2 Guillotine. Swedish built heavy-duty guillotine for accurate cutting of paper and heavier substrates. Refurbished 2010 and upgraded to computer programme. Comprising; Right side table to facilitate rear loading of cutting bed Central air table Steel side tables Tedpfxsy Awy Hs Anljb Computer programme cut control, with keypad input of data Twin cut control buttons Variable pressure clamp control Swift knife change system and adjustment Powered variable speed back gauge I.R. light beam guarding to UK HSE spec. 2 x HSS knives Including knife change tools and accessories. Specification: Cut width, Max: 220 cm Cut depth, Max: 220 cm Clamp opening :18.5 cm Electrics: 415V, 30A, 50Hz

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min Todpfsvphiyjx Anljb * 500 cuts/min * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, calander, reeler, offline calander, slitter winders and reel packer. Fully upgraded by Valmet in 2019, including formmaster, topformer, shoepress, pre-dryer section, inline coating, multinip calender and reeler. Characteristics: Todpfxovptbue Anlob Capacity: max ~ 350000 T/pa Width: 7500 mm Grammage: 35 – 170 gr/m2 Speed: max 1400 m/min

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, offline coater, calander, reeler, offline calanders and slitter winders. Various updates including headbox, top former, press section, offline coater, Voith speedsizer, Voith jet coaters and steambox & ceramic rolls. Characteristics: Capacity: max ~ 240000 T/pa Tjdpfx Anjvptqislob Width: 4800 mm Grammage: 40 – 170 gr/m2 Speed: max 1165 m/min

Condition: like new (used), functionality: fully functional, Model 2DS: Measurable sheet sizes: 100 - 2000 mm Scale graduation: 1/2 mm Accuracy of reading: 1/2 mm (1/10 mm possible) Tedsygi A Topfx Anlsb Angular deviations: 1/2 mm Glare-free built-in illumination: 4 fluorescent tubes (210 Watt) Voltage: 220V - 50 Hz Exterior dimensions in mm: 2120 x 1150 x 220 Weight (ca.): 108 kg

Year of construction: 1992, condition: good (used), Offline coating system with 2 coating and drying stations. Profiling, moisture measurement via electrical IR or impact (Voith). Characteristics: Tedpfx Aozdn H Denleb * Capacity: max ~ 184,000 tons/year * Width: 4800 mm * Speed: up to 1,400 m/min * Diameter of jumbo roll: max. 2600 mm * Coating weight: 6–14 g/m² (per side) * QCS system: Lippke | Honeywell * DCS system: Siemens | Teleperm

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 844, PLEASE READ THE DESCRIPTION CAREFULLY Used IPF25 filling machine with integrated weigher for filling paper open-mouth bags, including bags with handles. The machine is suitable for processing a variety of bulk products, such as: Cat litter Pet food Charcoal Wood pellets Other dry bulk materials .... Bag dimensions: Width: 150 to 300 mm Tedpfxjzrvlde Anlob Length: 300 to 600 mm Side gusset: 35 to 85 mm The machine is currently in our workshop and is undergoing refurbishment. The refurbishment work will be carried out in stages. If you are seriously interested, we can expedite this process so that the machine becomes available sooner. Please feel free to contact us for additional information or to arrange a viewing.

Condition: new, Big-bag emptying station with cyclone separator Tjdpfx Anjzpw U Ujljb For sale is a big-bag emptying station with an integrated cyclone separator, ideal for the low-dust handling and discharge of various bulk materials such as plastic granules, ground materials, powders, or recycled materials. The system is in fully functional condition and is available immediately. An inspection can be arranged at any time at our warehouse in Wuppertal.

Condition: like new (used), functionality: fully functional, A very nice hydraulic paper cutting machine is for sale. Brand: Horizon, model: APC M61. Features a program function and an eject function. Paper stack height: 100 mm, chrome table, and digital display. Tsdjzru Uwspfx Anljb You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (within the Netherlands). Best regards, Henk Hoos

Condition: used, functionality: fully functional, Robust Polar quick cutter 80 cm cutting width 12 cm cutting height Tsdezx Dknspfx Anljb Hydraulic clamping Includes 2 blades 1500 kg Collection only

Condition: used, Year of construction: 2015, Technical Data (New 525,000) Working Area: ▪ Working width: 360 mm ▪ Working area: 350 × 350 mm Laser & Power: ▪ Dual laser system (Laser Class I) ▪ 2 × ROFIN SINAR laser source at 230 W ▪ Full-Cut option for dual laser operation Production Capacity: ▪ Speed up to 60 m/min Software & Control: ▪ SEI ICARO ▪ ICARO license ▪ Integrated PC with touchscreen Material Handling: ▪ Servo unwind unit with web guide (Ø 76 mm) ▪ Quick-change rewind unit ▪ Scrap grid removal with winding & web heating ▪ Roll-to-sheet station ▪ 2 × cutting unit incl. 15 knives Vision / Registration: ▪ Barcode on the fly ▪ Register & web control Extraction & Cooling: ▪ Extraction system 5.5 kW Todpfxszhwf Ro Anlob ▪ Closed cooling circuit incl. Material Handling: ▪ Servo unwind unit with web guide (Ø 76 mm) ▪ Quick-change rewind unit ▪ Scrap grid removal with winding & web heating ▪ Roll-to-sheet station ▪ 2 × cutting unit incl. 15 knives Vision / Registration: ▪ Barcode on the fly ▪ Register & web control Extraction & Cooling: ▪ Extraction system 5.5 kW ▪ Closed cooling circuit incl. Material Handling: ▪ Servo unwind unit with web guide (Ø 76 mm) ▪ Quick-change rewind unit ▪ Scrap grid removal with winding & web heating ▪ Roll-to-sheet station ▪ 2 × cutting unit incl. 15 knives Vision / Registration: ▪ Barcode on the fly ▪ Register & web control Extraction & Cooling: ▪ Extraction system 5.5 kW ▪ Closed cooling circuit incl. Water cooling unit

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Summa 1400 FME-p” production system Item for sale: 1 x Summa 1400 FME-p Condition: This listing is for a used device, which may show signs of wear (minor scratches or discoloration). Tsdpozb Aktofx Anljb The device has been tested for functionality. A test print can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functional test for you. For more information, you’re welcome to contact us directly.

Year of construction: 2026, condition: like new (used), Big-Bag frame available in various designs Todoztzhaopfx Anlob with Big-Bag crossbeam for crane/forklift or with jib and electric chain hoist

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12349, Sack tip station / Bag dump station with dust collector powered by an integral fan with reverse jet filter cleaning of filtration cartridges. Tedpszf Nhfefx Anleb

Condition: good (used), Year of construction: 2012, functionality: fully functional, Pouch Sealing: • Flat pouches. • Doypack (stand-up) pouches. Zipper Integration: • Capability to seal all types of zipper closures. Advanced Finishing Operations: • Punching of holes, handles, and easy-open features. • Rounded corners for aesthetic and safety purposes. Branson Ultrasonic Technology: • Ultrasonic sealing of zippers, ensuring precision and durability. Additional Equipment: • Built-in screw compressor (10 bar). • Chiller for the cooling station, ensuring efficient cooling of bottom seals and zipper seals. Technology and Modular Design • The machine's modular design allows it to be tailored to various types of films, including laminated and co-extruded films, while maintaining high precision and process repeatability. • Servo technology ensures excellent control of tension and sealing time, resulting in outstanding product quality and stability. Tjdpfx Asvdptcjnlob Types of Pouches Produced on the Vegaplus Pouch System: • Three-side-sealed pouches. • Zipper pouches. • Doypack (stand-up) pouches made from a single film or with a separately inserted bottom gusset. • Retort pouches with rounded corners (notch-less). • Side-gusseted pouches with zippers.

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Todpfxszqt Dnj Anljb Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Condition: used, Polar 55EM paper cutting machine. Tedpfx Aneztanfslsb

Condition: excellent (used), Ishida multihued weigher with elevated conveyor, gantry and PFM bagging machine. Removed from a high care cooked meat plant in the last few weeks. Lovely condition. Tjdpfx Anelkc U Eoljb

Condition: used, Gainsborough bagger and All-Fill powder depositor. Tedpfevvpphjx Anlob

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 200 h, power: 4.5 kW (6.12 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,800 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,050 mm, number of axes: 4, controller manufacturer: Syntec, total height: 3,600 mm, total length: 5,800 mm, total width: 2,440 mm, overall weight: 2,600 kg, table length: 5,400 mm, table width: 2,030 mm, For sale is a large-format, 4-axis CNC portal milling machine from Yishun, privately owned. With its enormous working area and 1050 mm Z-axis, the machine is ideal for the precise machining of large components made of foam (Ureol/Styrodur), plastics, wood, and aluminum (e.g., for mold making, boat building, or prototype construction). The machine has only been in operation for approximately 200 hours (year of manufacture 2016) and will be handed over in perfect mechanical and electrical condition. High-quality industrial components have been used throughout. TECHNICAL DATA & COMPONENTS: • Working area (X/Y/Z): 1800 mm x 4500 mm x 1050 mm • External dimensions: approx. 5800 mm x 2440 mm x 3600 mm (L x W x H) • Weight: approx. 2600 kg • Spindle: High-quality HSD spindle • Drives: Reliable, powerful Yaskawa servo motors • Controller: Syntec controller (machine can be moved on-site) Tsdpszv U Tbefx Anlsb • Guides & Mechanics: HIWIN linear guides, WMH rack and pinion with precise Rouist gears on the servo motors, ball screw in the Z-axis feed • Equipment: Integrated zero-point sensor for the Z-axis. Post-processors for HSMtec are available to a limited extent. • Reference: The finely finished aluminum milling sample produced on the machine, shown in the video, is available (see photos). • Note on scope of delivery: The machine does not have an automatic tool changer, dust extraction system, or vacuum clamping table. CONDITION & HISTORY: The machine has been unused but stored dry in a hall for the past few years. To consistently prevent the onset of surface rust due to natural humidity in the winter, the steel structure was recently preventively re-primed and painted. The guides are completely free of rust and have been regularly preserved. The machine runs perfectly mechanically and electrically. IMPORTANT INFORMATION REGARDING TRANSPORT & PICK-UP: 1. Private sale: The sale is made by a private individual, excluding any liability for defects, warranty, or right of return. No VAT can be charged. Purchased as seen and tested. 2. Loading assistance on-site: A suitable forklift will be arranged and can be used free of charge for loading onto your low-bed trailer or truck. 3. Transport options: The machine is primarily intended for self-collection. Delivery within a close radius (up to 50 km) is possibly possible after prior arrangement and upon payment of costs. If transport over longer distances is an issue, we will certainly find a joint solution after prior consultation or provide assistance in finding a freight forwarder. We are open to realistic price offers. An inspection and demonstration of the axes on-site in 91183 Abenberg are welcome after prior arrangement.

Condition: ready for operation (used), Year of construction: 1983, BOLTMAKER SACMA SP.17 – 4 dies Fully functional with thread rolling machine up to M6. Incoterm: EXW The machine operates without any issues. Technical specifications below: Number of dies: 4 Heading tonnage: 480 kN Max. cutoff diameter at 500N/mm²: 8 mm Max. cutoff length: 65 mm Kickout stroke die max.: 45 mm Kickout stroke punch max.: 14 mm Max. thread 8.8/12.9: M6 Speed (pcs. per minute): 350 Main motor power: 26 kW Die diameter: 45 mm Die length: 70 mm Fixed punch diameter: 38 mm Fixed punch length: 85 mm Net weight: 10,000 kg Gross weight: 11,900 kg Tsdpswvt Hvjfx Anlsb The machine is available for any inspection.

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 500 kg, The machine was purchased during the liquidation of a company. Flowpack machine ITALDIBIPACK Dibiflow 500 – Year of manufacture 2021 – Very good condition Tjdjxw S Ixjpfx Anlob For sale is a high-quality flowpack packaging machine from the manufacturer ITALDIBIPACK, model Dibiflow 500, year of manufacture 2021. The machine is in very good, well-maintained condition and is ideal for the efficient packaging of a wide variety of products in tubular bags. Technical data Manufacturer: ITALDIBIPACK S.p.A. Model: Dibiflow 500 Year of manufacture: 2021 Connection: 400V – 3Ph + T + N – 50/60 Hz Power: 4.3 kW Weight: approx. 500 kg Equipment & Features Robust construction High-quality sensors for product and film detection Adjustable guide rails for different product widths Clean, modern control and drive technology Ideal for food, non-food, industrial products and more CE marking Perfectly suited for continuous packaging processes Condition The machine is ready for immediate use and shows only minor signs of wear. The guide systems, rollers, sensors and the entire mechanics are in very good condition (see pictures). Price Negotiable – €13,000 + €4,000 printer

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, Equipment: documentation/manual, The Table Top Print bagging machine enables efficient packaging and sealing of products in pre-made bags and is suitable for various formats. The machine is easy to operate and features a user-friendly display for setting up, saving jobs, and controlling operating parameters. For maximum flexibility, it offers automatic and manual operating modes with a secure sealing bar. Training a packaging operator takes less than five minutes. With integrated thermal transfer printing technology, bags can be directly printed with high-resolution graphics, text, and barcodes—eliminating the need for separate labeling. Tjdpfxjxlzr Ae Anlsb Features: - Multi-color display for straightforward settings - Pre-selection of desired product quantity for packaging - Integrated total product counter (with reset function) - Roll change in under one minute - Sealing via foot pedal, automatically, or manual push-button - Feed systems for automatic bag filling available on request Technical Parameters: 1. Maximum bag length: 450 mm 2. Maximum bag width: 250 mm 3. Maximum bag thickness: 0.04–0.1 mm per layer 4. Packaging speed: up to 25 units/minute 5. Supply voltage: 1Ph. 220V 50Hz 6. Power consumption: approx. 1 kW 7. Machine weight: approx. 70 kg (including printer) 8. Machine dimensions: approx. 670 x 665 x 860 mm 9. Print area: 53 x 75 mm 10. Bag type: wicketed bags on rolls Base machine: €12,500 + Thermal transfer printer: €5,500 + Label dispenser: €2,900 + SATO label printer incl. dispenser: €6,500 to €9,000

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Our state-of-the-art VFFS packaging machine is a true all-rounder, specifically designed to optimally support companies that demand the highest quality standards. With exceptional build quality and a wide range of applications, our machine features intuitive operation that streamlines your packaging processes. The highly powerful motors and user-friendly color touchscreen control system provide maximum flexibility during format changes and significantly simplify your packaging operations. The machine is equipped with memory slots for storing machine parameter settings. For this packaging line, we also offer fully and semi-automatic infeed systems, including weighing solutions, which can be retrofitted according to your requirements. If you want to optimize your packaging processes with robust productivity and high quality, Impuls Packaging is your ideal partner. Machine features: 1. Single film unwind 2. Individually servo-driven sealing jaw 3. Three servo drive controllers 4. HMI control panel 5. Two independent temperature controllers 6. Housing made of stainless steel 304 7. Documentation in the local language 8. Registration mark control 9. Programmable bag length 10. Vertical product flow 11. One format set is included in the price. Technical parameters: 1. Product length: L50-290mm Todswlgnrepfx Anlsb 2. Product width: W80-200mm 3. Packaging speed: up to 45 products/min (depending on product, bag length, and material) 4. Maximum film width: 420mm 5. Power supply: 1Ph. 220V 50Hz 6. Total power: approx. 3.9 kW 7. Machine weight: approx. 300 kg 8. Machine dimensions: approx. 1300x1170x1585mm Bag types: 1. Classic flow pack bag 2. Stand-up pouch (classic flow pack bag with side gusset – available as an optional extra)