Used Paper Rolls for sale (7,920)

Year of construction: 2019, condition: new, The machine was only used for testing – it is practically new. The PLS 2200 saw was designed for cutting rolls of paper, laminate, and CPL. The machine’s parameters allow cutting rolls up to 2200 mm long, and loading into the machine is assisted by a pneumatic extension of the lower rollers. The side support roller ensures high cutting quality. Technical data: Materials that can be cut: paper, laminate, CP, and foils suitable for cutting with a saw blade Maximum roll diameter: 600 mm Maximum roll length: 2200 mm Cedpexduzbefx Aacehd Minimum cutting width: 20 mm Saw blade thickness: 5 mm Saw blade rotational speed: 1500 rpm Total power: 5 kW Machine weight: 900 kg.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Stöcklin EFP 35 OSS Prisma Low-Lift Pallet Truck with Cross-Side Seat for paper rolls - cable reels - reels Year of Manufacture: 2021 Battery: 2022 / Lithium Ion (tested by a specialist company on March 26, 2025, with report) Operating Hours: 291 Rated Capacity: 3500 kg Prisma Forks Long Wheelbase Fork Length: 1900 mm Width over Forks B3: 1600 mm Fork Height Lowered: 280 mm Fork Lift: 205 mm Device Width: 800 mm Chjdpfxexdh Eas Aaced Floor Plate – Adjustable Function Load Rollers 2 x 200 x 55 in Cast Polyamide GSPO with Charger (tested by a specialist company on March 26, 2025, with report)

Condition: used, Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland type R96-20 Chjdpfxsdzqc Is Aacjd No. 9745 Year of construction 1999 Load capacity 2000 kg Centering pin Ø 90 mm Suction surface outside diameter 850 mm (plus seal) Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction area 0.5 m2 Vacuum min. -800 mbar Suction capacity approx. 100 m³/h per vacuum pump Motor power 2x 2.2 kW Mains connection 400 Volt, 50 Hz - 2 Rietschle vacuum compressors, type VCE 100 Dimensions Ø x H 1600 x 2250 mm Height with centering mandrel 2500 mm Total height in transport frame 2950 mm Dead weight 2.5 tons

Condition: used, Year of construction: 1975, functionality: fully functional, Paper Cutting and Rewinding Machine – Goebel Robust industrial equipment, manufactured in Germany, specifically designed for slitting and rewinding paper rolls. Delivers high precision in processing large reels and is ideal for preparing material for printing houses, packaging production, and other applications in the paper industry. Its solid construction and proven reliability ensure successful operation even after decades of use. Chedpfx Asxcxlueacsd

Condition: refurbished (used), Year of construction: 2012, LYISH Rewinder for Toilet paper and Hand towel rolls, and NON-woven rolls. Standard pyramid pattern for max volume. Rolls are perforated to length of 115mm (other sizes can be adjusted) Rolls length setting on PLC screen. The rolls are sealed with glue line and tail cutting. Also optional - coreless rolls production on Stainless steel mandrel Specifications: - Rewinding speed (max.) 350 m/min - Paper width – 2.75 m (Max) - Parent reel dia. – 1.25 m (Max) - Product dia. 350 mm (max.) - Pneumatic lifting arms for jumbo roll - Paper grade 17-70 g.s.m. single or double ply - Perforation – standard system includes 4 rotating blades, distances between perforation lines changes by changing gears. Cedpfxjd Skg Rs Aacehd - Embossing – steel to rubber, standard pyramid pattern (special pattern – optional). -Core guiding system for logs – preventing conic edges during rewinding of large diam rolls - Finishing station including glue injection, cutting and turning the rolls for adhesion forming a tail seal. - Automatic ejection of finished rolls sideways out of the machine. - Machine is supplied as standard together with two 75 mm dia. mechanical shafts for the jumbo roll. - Power – 18 kw - Weight – 6500 kg The machine was refurbished by the producer - LYISH , and will be supplied with guarantee for 12 months. On line Slitting system (Slitter-Rewinder) - optional, can be added if required. Edge embossing system - optional (can be added if required) Full CE safety covers - optional (can be added if required)

Condition: good (used), Year of construction: 2021, functionality: fully functional, Stöcklin EFP 35 OSS Prisma Low-Lift Pallet Truck with Cross-Side Seat for paper rolls - cable reels - reels Year of Manufacture: 2021 Battery: 2022 / Lithium Ion (tested by a specialist company on March 26, 2025, with report) Operating Hours: 291 Rated Capacity: 3500 kg Prisma Forks Long Wheelbase Fork Length: 1900 mm Width over Forks B3: 1600 mm Fork Height Lowered: 280 mm Fork Lift: 205 mm Device Width: 800 mm Floor Plate – Adjustable Function Load Rollers 2 x 200 x 55 in Cast Polyamide GSPO with Charger (tested by a specialist company on March 26, 2025, with report) Chodpfx Aaexdh Emsced

Condition: good (used), functionality: fully functional, Year of construction: 2021, Stöcklin EFP 35 OSS Prisma Low-Lift Pallet Truck with Cross-Side Seat for paper rolls - cable reels - reels Year of Manufacture: 2021 Battery: 2022 / Lithium Ion (tested by a specialist company on March 26, 2025, with report) Operating Hours: 291 Rated Capacity: 3500 kg Prisma Forks Long Wheelbase Chodpfx Aaoxdhykscod Fork Length: 1900 mm Width over Forks B3: 1600 mm Fork Height Lowered: 280 mm Fork Lift: 205 mm Device Width: 800 mm Floor Plate – Adjustable Function Load Rollers 2 x 200 x 55 in Cast Polyamide GSPO with Charger (tested by a specialist company on March 26, 2025, with report)

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale Chedjwk Rlxjpfx Aaced manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, overall weight: 4,000 kg, power: 17 kW (23.11 HP), total width: 1,510 mm, total length: 6,500 mm, total height: 1,820 mm, Automatic paper roll paper lid machine with inline packing machine for 8oz and 12oz cups Speed - 70~100 pc/minute Raw material - One-side or two side (polyethylene)film coated/laminated paper Cjdpexur Hijfx Aacjhd (Like the PE coated paper; PLA paper; card boad paper with film) Paper Lid Size - for 8oz and 12oz Working Power - 12kw Total Power - 17KW, Power Source - 3-phase, 380V, 50/60Hz, User Need To Buy Air Compressor

Condition: like new (used), Ideal 5255 paper cutting guillotine The machine is 100% operational, after a review in very good condition. This is the currently produced model, the latest model. Codpfx Aaju Ul Uxjcshd Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max distance between the saddle and the knife: 520mm power supply 230V Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with an accuracy of 1/10 mm electronic handwheel with stepless speed adjustment of the backgauge mm/inch switching Electromechanical drive of the knife and pressure beam Transparent safety covers laser cutting line two-hand cutting start, electronically controlled automatic return of the knife from any position Additional equipment includes: side tables, a spare knife, a split, tools for replacing the knife, including a safe grip, tapping block and documentation.

Condition: refurbished (used), Year of construction: 2000, Have a Special Folder Completely Rebuilt with New Rollers & New Gears. Anybody interested please feel free to reach out. H&H Folder with the following Details: 8 Plates + 6Plates - Gremser Flatpile Feeder (Year:2012) - Mobile Feeder with height adjustment, 50X70. - First Unit: H&H M7.32 52/8. Working width: 52 (Year:1999) -Second Unit: H&H KL 112 45/6 1. Extended Delivery 2. Cutting Unit for 2-3 Up Production. (Year:1999) (Working Width: 42cm) 3. Stacker Chedpjwcln Ejfx Aacsd VERY SPECIAL FOLDERS FOR A VERY SPECIAL PRICE

Condition: new, spare parts Chedewzpn Tspfx Aacod

Condition: good (used), Paper cutting guillotine Ideal 4860 The machine is 100% functional, after inspection in very good condition. This is the currently produced model, the latest model. Technical data: working width: 475mm stack height: 80mm minimum remnant: 35mm max. distance of the saddle from the knife: 450mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromagnetic knife and pressure beam drive Cjdpfx Aaowunk Hecehd Photocells laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: excellent (used), Year of construction: 1999, Ref:11017 . 1999 Polar 92 E Guillotine. 92cm guillotine Equipped with: Frequency controlled drive motor Variable speed back gauge Microprocessor control Colour display with operator guidance graphics Variable pressure clamp for various stocks Air table with blower Steel side tables left & right 2 x HSS knives Knife changing device Rear Table Guard I.R. light barrier guard Chedpfx Aasxnzqqscjd Including tools & manual. Specification: Cutting Width, Max: 92 cm Clamp Opening, Max: 11 cm Feed Depth, Max: 92 cm Power Required : 3kW

Year of construction: 2021, condition: new, New high quality ISITAN IRM 1550 x 140 Plate Bending Machine – powered sheet metal bending rolls 3 Rolls – other sizes and capacities in stock STANDARD FEATURES & SPECIFICATIONS Easy operation with mobile control panel with push buttons Conical bending device Very suitable for light and medium plates, aluminium or stainless steel Built according to EC Safety Directives and has CE Mark Manual Drop-End for easy removal of finished ferrule Hot rolled SAE 1050 (CK 45) Steel Rolls Main motor with Brake System Precision Bending with Brake Motor SAE 1050 Quality Certificated Steel Rolls with high tensile strength Two rolls powered by a single gearbox and gear system for top and bottom rolls Spheroid Cast Iron Main Frames Wire grooves at the end of the rolls Precision Bending with Brake Motor Model IRM 2550×140 produced standard with motorised back roll Specification on these 1550mm x 4mm powered bending rolls in the chart below: MODEL Usefull length mm Bending capacity mm Roll diameters Ø mm Roll speed m / min. (dk.) Motor power kw Wire grooves dia. mm Length mm Width mm Height mm Weight kg IRM 1050 x 110 1050 4 110 3 2.2 4 / 7 / 9 / 13 2200 750 1000 990 IRM 1050 x 130 1050 5 130 3.5 2.2 4 / 7 / 9 / 13 2200 750 1000 1200 IRM 1270 x 120 1270 4 120 3 2.2 4 / 7 / 9 / 13 2470 750 1000 1115 IRM 1270 x 140 1270 5 140 3.5 2.2 4 / 7 / 9 / 13 2470 750 1000 1350 IRM 1550 x 110 1550 3 110 3 2.2 4 / 7 / 9 / 13 2700 750 1000 1200 IRM 1550 x 140 1550 4 140 3.5 2.2 Cjdjhpchyepfx Aacohd 4 / 7 / 9 / 13 2700 750 1000 1420

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. Cjdpfxeh U Rzgs Aacjhd FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Year of construction: 2014, condition: refurbished (used), Now available: Mueller Apparatebau unwinder 6802C available. Completely refurbed and like new. Direct available for your production. Chsdpfehd Nxvsx Aacjd

Condition: used, Year of construction: 2017, sheet width 2070 mm plate thickness 25 mm pre-bending 18 diameter of upper rolls 320 mm side roll diameter 260 mm diameter of lower rolls 320 mm 26 kW 8100 kg 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device Chjdowc D Dxspfx Aaced - CE mark

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Codpfext Nnnox Aacehd Condition: very good! Functionality checked. FLITS Rental & Sales service: with every machine we include a bundle of baling wire (120 wires). Do you require additional bundles of baling wire? Please request a complimentary quote. At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are very welcome to view the machines at our premises. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to advise you thoroughly and present the most suitable machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste processing

Condition: ready for operation (used), total length: 9,000 mm, total width: 4,300 mm, total height: 3,050 mm, empty load weight: 190,000 kg, top side rolls hydraulicaly driven 110 HP on top roll Extra top roll included, dia 660 mm Hardened rolls treated with 50-NI-CR-No 7 Clamping force: 1000 ton Conical bending Electro mechanical control Max open between rolls: 205 mm Foundation needed: 10 500 x 5300 x 2400 mm Number of rolls: 4 Csdpfx Ajxqh S Tsacehd Roll capacity cold: 3100 x 125 mm Roll capacity warm: 3100 x 180 mm Type: hydraulic Roll dia upside: 850 mm Dia under roll - side rolls: 850 mm - 720 mm Driven rolls: 3 driven rolls Power needed: 230 HP total

Condition: good (used), Year of construction: 1994, spindle drilling machine 1994 (engine new 2015) machine no.: PB04.08.94.261 4 drill heads, can be upgraded to 6 drill diameter: 3mm to 14mm hole spacing: 31.7mm to 293mm hole spacing using the sliding table: 1mm to 420mm located: Germany Insertion depth behind the drills: 25 mm Csdpfxevccnks Aacshd sliding table width: 450 mm Sliding table size in front of the drills 300 mm maximum stacking height: 50 mm power requirements: 230/400 volts 3 phases, 50 Hz, 1.87 kWh. space requirement: 770mm (W) x 760mm (D) x 1350mm (H) weight: 275 kg net located: Germany available: immediately

Condition: refurbished (used), Year of construction: 2013, We have multiple Mueller Apparatebau paper cutting systems available! Paper cutters fo pin feed available. Cedpfxotwc Abj Aacehd We offer all machines after complete maintenance. We mostly have model 6612 but we also have a paper cutter system type 6611. Next to that we have a lot of other Mueller modules like unwinder, collating module and folding modules etc etc! Just let us know and we have the solution!

Condition: ready for operation (used), nominal power: 201.153 kW (273.49 HP), 3 cardan driven rolls, therefore no slipping/skidding and also ideal for conical rolling - Digital readout - Electromagnetic clutch - 2 speeds (variable) 3 + 6 m/min - Engine: 220 HP/PK; 160 kWt - Rolling capacity: warm: upto 230mm - Rolling capacity: cold: 120mm Codpjxqh S Hefx Aacehd - 2 liftingsystems included - Spare upper roll included of dia 700 mm - Has the option of section bending, axle dia: 320 mm!! Number of rolls: 3 Roll capacity cold: 4100 x 120 mm Roll dia upside: 900 mm Dia under roll - side rolls: 850 mm

Condition: ready for operation (used), total length: 1,850 mm, total width: 700 mm, total height: 1,200 mm, empty load weight: 520 kg, nominal power: 1.1 kW (1.50 HP), conische buiging Number of rolls: 3x Roll capacity cold: 1270 x 3 mm Roll dia upside: 90 mm Cjdsxqh Tdspfx Aacshd

Condition: ready for operation (used), total length: 2,700 mm, total width: 750 mm, total height: 1,000 mm, empty load weight: 1,420 kg, nominal power: 2.2 kW (2.99 HP), conical bending with hardened rolls with motorized backroll Number of rolls: 3x Codpjxqh Tkofx Aacjhd Roll capacity cold: 1550 x 6 mm Roll dia upside: 140 mm