Used Paper Rolls for sale (9,040)

Condition: used, functionality: fully functional, Year of construction: 2009, load capacity: 7,500 kg, construction height: 1,200 mm, empty load weight: 1,620 kg, Paper roll clamp Load centre of gravity: 650 ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: very good Description: Arm height: 1x 1290 mm 2x 515mm, opening width 420 / 1,300 mm, rotation range 360 endless Hnodou Dy Hkspfx Aacok Arm height: 1x 1290 mm 2x 515mm, opening width 420 / 1,300 mm, rotation range 360 endless

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Hnodsu Tg Spspfx Aacsk Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: used, functionality: fully functional, Year of construction: 2008, load capacity: 3,000 kg, Paper Roll Clamp ISO Class: ISO Class 3 = 2,500 - 4,999 kg Hsdpsyzdftsfx Aaconk Technical Condition: good Description: Year 2008 ISO 2A / 3A Capacity 3,000 kg Rotator 180° Opening range 250-1,300 mm Width 770 mm Contact pads 400x250 mm ID OS1936

Condition: used, Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland type R96-20 No. 9745 Year of construction 1999 Load capacity 2000 kg Centering pin Ø 90 mm Suction surface outside diameter 850 mm (plus seal) Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction area 0.5 m2 Hodpfxjdzqc Ie Aaconk Vacuum min. -800 mbar Suction capacity approx. 100 m³/h per vacuum pump Motor power 2x 2.2 kW Mains connection 400 Volt, 50 Hz - 2 Rietschle vacuum compressors, type VCE 100 Dimensions Ø x H 1600 x 2250 mm Height with centering mandrel 2500 mm Total height in transport frame 2950 mm Dead weight 2.5 tons

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 4,000 kg, Paper roll clamp Load center: 650 Hodex Racyjpfx Aaconk ISO Class: ISO Class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully operational Technical condition: good Description: Year 2020 ISO 4A (61 cm) Capacity 4,000 kg Rotator 180° Opening range 250-1,300 mm Width 1,200 mm ID OS1813

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 3,900 kg, Paper roll clamp ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Hnjdpfex N U S Hox Aacok Description: Year 2019 ISO 3A (51 cm) Capacity 3,900 kg Rotator 360° Opening range 220-1450 mm Width 1,000 mm ID OS1770

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 3,900 kg, Paper Roll Clamp Hjdpex N U Sysfx Aacenk ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully operational Technical Condition: Good Description: Year 2019 ISO 3A (51 cm) Capacity 3,900 kg Rotator 360° Opening range 220–1,450 mm Width 1,000 mm ID OS1769

Condition: used, Year of construction: 1975, functionality: fully functional, Paper Cutting and Rewinding Machine – Goebel Robust industrial equipment, manufactured in Germany, specifically designed for slitting and rewinding paper rolls. Delivers high precision in processing large reels and is ideal for preparing material for printing houses, packaging production, and other applications in the paper industry. Its solid construction and proven reliability ensure successful operation even after decades of use. Hsdpfxjxcxlus Aaconk

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 6,500 kg, Paper roll clamp ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: good Hjdpfsvbmtbex Aacsnk Description: Year 2017 ISO 4A (61 cm) Capacity 6500 kg Rotator Opening range 500-1300 mm Width 930 mm Contact pads 280x1200 / 280x500 mm ID OS1413

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 6,500 kg, Paper roll clamp ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: good Hsdpfxst S Sq He Aacsnk Description: ISO 3A/4A Year 2018 Capacity 6500 kg Opening range 500-1300 mm Width 930 mm Pad 1200x270 ID OS1252

Condition: used, functionality: limited functionality, Year of construction: 1990, load capacity: 2,700 kg, Paper roll clamp ISO Class: ISO Class 4 = 5,000 - 10,000 kg Condition: Limited operational readiness Technical Condition: Poor Description: Year 1990, ISO 4A (61 cm), Capacity 2700 kg / 800 mm, Width 800 mm, Pad 1100x970, ID OS847 Hsdpfx Aaew Dlh Iscenk

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 4,600 kg, Paper roll clamp ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Hnodpfx Aew Dwrrsacsk Technical condition: good Description: Year 2014 ISO 4A (61 cm) Capacity 4,600 kg Rotator 180° Opening range 250-1520 mm Width 930 mm Contact pads 280x500 mm ID OS1553

Condition: used, Year of construction: 2019, load capacity: 1,200 kg, Paper roll clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Hsdpfx Asud Eaasacjnk Condition: Ready for use and fully functional Technical condition: good Description: ISO 2A (41 cm) Year 2019 Capacity 1200 kg Opening range 530-1670 mm Clamp length 1000 mm Contact pads 250x900 mm Tilt range: 90° Width 1100 mm ID OS1386

Condition: used, Year of construction: 2010, load capacity: 2,300 kg, Paper roll clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2010 ISO 3A (51 cm) Capacity 2300 kg Rotator 360° Opening range 250-1300 mm Width 950 mm Contact pads 250x365 mm ID OS1371 Hnjdpfx Asul Idljacek

Condition: refurbished (used), Year of construction: 2012, LYISH Rewinder for Toilet paper and Hand towel rolls, and NON-woven rolls. Standard pyramid pattern for max volume. Rolls are perforated to length of 115mm (other sizes can be adjusted) Rolls length setting on PLC screen. The rolls are sealed with glue line and tail cutting. Also optional - coreless rolls production on Stainless steel mandrel Specifications: - Rewinding speed (max.) 350 m/min - Paper width – 2.75 m (Max) - Parent reel dia. – 1.25 m (Max) - Product dia. 350 mm (max.) - Pneumatic lifting arms for jumbo roll - Paper grade 17-70 g.s.m. single or double ply - Perforation – standard system includes 4 rotating blades, distances between perforation lines changes by changing gears. - Embossing – steel to rubber, standard pyramid pattern (special pattern – optional). -Core guiding system for logs – preventing conic edges during rewinding of large diam rolls Hnodpfxjd Skg Re Aacok - Finishing station including glue injection, cutting and turning the rolls for adhesion forming a tail seal. - Automatic ejection of finished rolls sideways out of the machine. - Machine is supplied as standard together with two 75 mm dia. mechanical shafts for the jumbo roll. - Power – 18 kw - Weight – 6500 kg The machine was refurbished by the producer - LYISH , and will be supplied with guarantee for 12 months. On line Slitting system (Slitter-Rewinder) - optional, can be added if required. Edge embossing system - optional (can be added if required) Full CE safety covers - optional (can be added if required)

Condition: good (used), HPM 92 Paper Cutting Guillotine Machine in very good condition, ready to work. Year of manufacture: 2009. High quality. Hnodpjywdpkofx Aacek Technical specifications: Cutting width: 920 mm Stack height: 120 mm Weight: 2500 kg 380V power supply Equipment: – Programming unit with color touchscreen monitor (Mitsubishi Manufactured) – Air table – Enlarged side tables – Photocells – Chrome table surfaces – Spare knife Machine modeled after the German Polar, very solidly built, with Western electronics (Schneider, Mitsubishi, Eaton). Very stable rear frame construction, CNC rail guidance, ball screw drive.

Condition: good (used), Perfecta BSB 3L Paper Jogger with Roller The machine is 100% functional and in perfect condition. This is the latest design from a German manufacturer. Year of manufacture: 2016. Technical specifications: Maximum format: 1150x900mm Stack height: 160mm Weight: 550kg Power supply: 400V Air squeezing roller Air table with micro-perforation Tilt angle adjustment Jogging frequency adjustment (inverter) Adjustable force and speed of the air squeezing roller. Chrome-plated table surface Hjdpjyur Hqjfx Aacjnk Full documentation set.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm Hodpfx Aewk Rlxeacsnk weight: 240kg

Condition: like new (used), Ideal 5255 paper cutting guillotine The machine is 100% operational, after a review in very good condition. This is the currently produced model, the latest model. Hnodpfju Ul Uxex Aacek Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max distance between the saddle and the knife: 520mm power supply 230V Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with an accuracy of 1/10 mm electronic handwheel with stepless speed adjustment of the backgauge mm/inch switching Electromechanical drive of the knife and pressure beam Transparent safety covers laser cutting line two-hand cutting start, electronically controlled automatic return of the knife from any position Additional equipment includes: side tables, a spare knife, a split, tools for replacing the knife, including a safe grip, tapping block and documentation.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, overall weight: 4,000 kg, power: 17 kW (23.11 HP), total width: 1,510 mm, total length: 6,500 mm, total height: 1,820 mm, Automatic paper roll paper lid machine with inline packing machine for 8oz and 12oz cups Speed - 70~100 pc/minute Raw material - One-side or two side (polyethylene)film coated/laminated paper (Like the PE coated paper; PLA paper; card boad paper with film) Paper Lid Size - for 8oz and 12oz Working Power - 12kw Total Power - 17KW, Power Source - 3-phase, 380V, 50/60Hz, Hnjdpfxjxur Hio Aacok User Need To Buy Air Compressor

Year of construction: 2025, operating hours: 10 h, condition: new, functionality: fully functional, I want to sell a paper dish making machine which makes 4 inch drones of good quality Hodeyy U R Rspfx Aaconk

Condition: not inspected (used), Year of construction: 1985, functionality: unexamined, machine/vehicle number: 0485.1184.463, outer diameter: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Hsdoynkapopfx Aaconk By placing a bid, you are obliged to collect the item within the designated period: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Tank diameter: 1,300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,500 x 1,800 mm Machine weight: 700 kg External reference: Pieper - Lot 5

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, stack height: 200 mm, paper weight (min.): 36 g/m², paper weight (max.): 160 g/m², product width (max.): 520 mm, roll diameter: 1,370 mm, TECHNICAL DETAILS Unwinder: Maximum production speed: 250 m/min Maximum web width: 520 mm Minimum web width: 150 mm Maximum roll diameter: 1,370 mm Maximum roll weight: 800 kg Slitter: Maximum production speed: 250 m/min Maximum web width: 520 mm Minimum web width: 150 mm Paper thickness: 36 g/m² to 160 g/m² Cutting accuracy: +/- 0.2 mm Continuously variable format setting: 4" - 25" Continuously adjustable cutting width: 5 mm to 80 mm Stack counter/stacker: Minimum stack length: 100 mm Maximum stack length: 635 mm Minimum stack width: 115 mm Maximum stack width: 720 mm Minimum stack height: 100 sheets Maximum stack height: 200 mm Maximum production speed: 250 m/min (depending on paper thickness) Paper thickness: 36 g/m² to 160 g/m² MACHINE DETAILS Unwinder: Power supply: 32 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Slitter: Power supply: 32 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Stack counter/stacker: Power supply: 35 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Folding station: Power supply: 50 A; 400 V, N, PE EQUIPMENT Hnjdpfxsyzpw Uj Aacsk Electrical documentation Full flexibility for cutting and residual formats Format and length changes via operator panel Longitudinal cuts with knife holder possible Waste extraction possible (extractor not included in the system) Can stack up to two sheets simultaneously

Condition: good (used), Year of construction: 1988, Ref: 11084 . 1988 Polar 115 EM 115cm Automatic guillotine Hnedpfsy A Rnkox Aacjk Equipped with: Central air table with blower Micro-computer programme with memory bank (99prog/1664 steps) LED display 2 speed back gauge Keyboard programming with static back gauge Gripper margin adjustment for each programme Compensator for print variation Variable pressure clamp Illuminated cutting area 2 high speed steel knives Light beam guarding Accessories: Pallet lift Specification: Cutting width, Max: 115 cm Clamp opening, Max: 16.5 cm Feed depth, Max: 115 cm Power required : 4Kw

Condition: excellent (used), Year of construction: 2002, Ref: 11085 . 2002 Polar 66 Guillotine 66cm automatic guillotine Equipped with: Keyboard programming with static back gauge Computer programme with 99 programmes, 999 cuts Metric/Imperial measurement scale Hnodey A Rm Tepfx Aacek Motorised back gauge Variable pressure hydraulic clamp Optical cut-line indicator Overload protection circuit 2-handed cutting operation 10 beam light barrier with FFM guarding Specification: Cutting width: 670 mm Feed depth: 670 mm Clamp opening max: 80 mm