Used Patel Automation for sale (12,697)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, A log turning (orientation) system for top-end-first positioning is available for sale. The system was in use for only a few years before the entire log infeed was removed. Dedpfx Aewkdt Njg Tski We also have additional components from the same log infeed available.

Condition: like new (used), functionality: fully functional, Danfoss VLT AutomationDrive FC301/302 frequency converter for 22 kW motor. Unit is unused (old stock), stored in dry warehouse conditions. Manufacturer: Danfoss Dkedpfx Ajyl Nwneg Tsi Model: VLT AutomationDrive FC301/302 Motor power: 22 kW Condition: New – never commissioned With control panel (LCP) Industrial heavy-duty series Suitable for pumps, fans, extruders, presses, process lines Available immediately from stock.

Condition: new, functionality: fully functional, machine/vehicle number: 131H1603, overall weight: 52 kg, total length: 660 mm, total width: 370 mm, total height: 333 mm, input voltage: 400 V, input current: 161 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, continuous power: 90 kW (122.37 HP), Equipment: type plate available, Exact type designation: Danfoss FC-302P75KT5E20H1BGXDXXSXXXXA0BXCXXXXDX Output power and output current: 90 kW | 177 A Dsdpfxjv Tw Ume Ag Teki 131H1603 ° NEW in original packaging! ° Easy operation thanks to the integrated control panel ° Quick parameterization possible thanks to the Quick Menu ° Original operating instructions for commissioning included Only 1 units left in stock!

Condition: new, functionality: fully functional, machine/vehicle number: 132H9037, input voltage: 400 V, input current: 204 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, continuous power: 110 kW (149.56 HP), Equipment: type plate available, Exact model designation: Dsdpfx Asx Hvy Hjg Tjki Danfoss FC-103N110T4E20H4XGCXXXSXXXXAQBXCXXXXD0 Output power and output current: 110 kW | 212 A 132H9037 ° NEW in original packaging! ° Formed! ° Easy operation via integrated control panel ° Quick parameterization possible ° Original operating instructions for commissioning included Only 1 unit left in stock!

Condition: like new (used), operating hours: 3 h, functionality: fully functional, machine/vehicle number: 131H3091, input voltage: 400 V, input current: 96 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, continuous power: 55 kW (74.78 HP), Equipment: type plate available, Exact model designation: Danfoss FC-302P55KTE20H1BXXXXXSXXXXAXBXCXXXXDX Output power and output current: 55kW | 106A 131H3091 ° With test seal! Dedox Hvuwjpfx Ag Toki ° Only 3 motor operating hours - according to the manufacturer, over 100,000 possible! ° Easy operation thanks to the integrated control panel ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included Only 1 unit left in stock! The item has been reset to factory settings and is therefore in its original condition as delivered by the manufacturer. Please refer to the original product images for the visual condition. Fully functional and ready for immediate use.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 131G9799, input voltage: 400 V, input current: 647 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP54, year of last overhaul: 2025, continuous power: 355 kW (482.67 HP), Exact type designation: Danfoss FC-302P355T5E54H2XGC3XXSXXXXA6BXCXXXXDX Output power and output current: 355kW | 658A 131G9799 ° With TEST SEAL! ° Easy to use thanks to the integrated control panel ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included Dkjdpov Hbvujfx Ag Toi Only 1 piece left in stock! Item has been reset to factory settings and is therefore in the original delivery condition from the manufacturer. Please refer to the original product images for the optical condition. Functional and ready for immediate use.

Condition: new, Frequency converter Manufacturer: Danfoss Dksdpfohukxxsx Ag Toi FC-302P2K2T5E20H1XGXXXXSXXXXAXBXCXXXXDX Typ: VLT® AutomationDrive FC-302 (P2K2) 2.2 KW / 3.0 HP, Three phase 380 - 500 VAC, (E20) IP20 / Chassis

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,300 h, functionality: fully functional, spindle speed (max.): 6,400 rpm, bar diameter (max.): 32 mm, controller model: TX 8 i-p, workpiece length (max.): 245 mm, TECHNICAL DETAILS Main Spindle Max. bar capacity: 32 mm Max. workpiece length (swiss turning): 245 mm Max. workpiece length (short turning): 125 mm Max. spindle speed: 6,400 rpm Sub Spindle Max. bar capacity: 32 mm Max. clamping length for workpiece: 250 mm Max. spindle speed: 6,000 rpm Upper Turret Number of stations: 10 All driven Djdpfx Ajyn Imyjg Tski Max. speed: 12,000 rpm Lower Turret Number of stations: 9 All driven Max. speed: 12,000 rpm Backworking Unit Number of stations: 8 Driven stations: 3 (T12, T13, and T14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm MACHINE DETAILS Spindle hours: 8,300 hours Control system: TX 8 i-p EQUIPMENT Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist separator Bar feeder FMB turbo 3-36

Condition: used, functionality: fully functional, Year of construction: 2012, ADIGE CM 601 AUTOMATIC CIRCULAR SAW MAKE ADIGE, MADE IN ITALY MODEL CM 601 YEAR 2012 CONTROL ADIGE / SIEMENS MAX. CUTTING CAPACITY 12 – 202.0 mm Djdpjx Nnakjfx Ag Teki MAX. CUTTING LENGTH 400.0 mm BAR LENGTH 6500.0 mm SAW MOTOR 7.5 kW PLUS PART WEIGHING SCALE PARTS CONVEYOR BAR FEED

Year of construction: 2020, condition: used, Fully Automatic Wrapping Dsdpfoymncljx Ag Tjki Machine. Year 2020. Suitable for shrink-wrapping doors, frames, architrave etc Ring Diameter 1100mm Conveyor height 870 - 900mm Conveyor width 750mm Infeed conveyor length 1300mm Intermediate conveyor length 1800mm Outfeed conveyor 1300mm Conveyor load capacity 120 kg / m Max Crown rotation velocity 80 Total Weight 710kg Installed Power 3.00kw Power Supply 400v, 50 hz 3 Phase and Neutral Working Pressure 5 - 7 Bar

Condition: used, Year of construction: 2007, Fully programmable 3 axis horizontal CNC swing chisel mortiser suitable for general joinery and furniture production. By a combination of automatic movement of the mortisting head in the x axis and an automatic gripper that positions the timber no manual movement or handling of the component is required other than loading and positioning the timber against the pneumatic reference stop and then unloading when the mortising cycle is finished. The complete movement, clamping and, mortising cycle is fully automatic. X, Y and, Z axis movements are all via re-circulating ball and screw drives and using linear slideways to give maximum positioning accuracy. Thanks to the programmable Z axis it is possible to produce off line mortises, double mortises or produce thicker mortise slots with the same chisel. Programming is very simple thanks to the 'user friendly' graphic touch screen controller were programs can be memorised and stored under a number or specific name up to 8 characters. The swing chisel cutter itself produces a very clean mortise slot and if required for deep mortises up to 3 depths of cut can be programmed to give a 'woodpecker' type cutting operation. Other programming options include working off either the face of the timber or the thickness and the possibility to produce mirror image components (left/right hand) in one program. Year - 2007 CE X axis stroke 1100mm. Y axis stroke 250mm. Max. depth of cut 120mm (depending on chisel size) Dodpfx Asymnbnog Toki Z axis stroke 100mm Max. workpiece height of 120mm. All movements on re-circulating ball and screw drive with brushless motor Max. workpiece width 200mm Max. swing chisel thickness 20mm. Min . slot length 25mm approx (with swing chisel) Min. slot thickness 6mm. 3 vertical pneumatic clamps. 3 horizontal pneumatic clamps. 4 hp main motor. 'Power 1000' touch screen graphic controller with 99 programs each with 50 lines. USB key facility. Programmable speed for cutting depth. Anti splinter guards with air blowers and dust extraction points. Working table dimensions 1210mm x 215mm Air supply 6 bar / 470 l/min consumption. Fitted with separate dedicated programmable hollow chisel head for producing the small mortises for glazing bars

Condition: used, Year of construction: 2018, Cursal TRSI 8000 AP Automatic Crosscut Saw With Integrated Pusher - 2018 CE Durable and versatile automatic crosscut saw with exceptional speed and accuracy. Impressive speed and accuracy CNC programmable sequential cutting capabilities Optional loading and unloading Specification : 6000 mm In feed capacity, push feed crosscut Saw Dkodpfx Aexxvqteg Tei Single-block structure: the frame made of welded - worked steel Pneumatic side-aligner installed before of the blade Pneumatic blade-press with mobile casing: stroke 150 mm. Breaking press-wheels with horizontal axis installed after blade Cutting height on the guide: 120 mm. Width of the boards: min. 40 - max. 250 (300) mm Automatic cutting control managed by the computer Vertical alternated blade movement: pneumatic system with totally controlled stroke Saw blade HM steel with alternate teeth Ø 500 mm, hole Ø 35 mm - Z=120 Blade motor HP 7,5 with automatic brake Cutting time: adjustable from 0.3 to 2 seconds CNC unloading belt with 2 programmable ejectors 2018 CE

Year of construction: 2020, condition: used, SCS AUTOMABERG TRIM & PERF year 2020 Universal machine for die cut, trim, split, cut, perforate or punch of products. For inline production. Technical specifications: mechanical speed: up to 9.000 cycles/h Dsdpfjyr Eh Nsx Ag Tjki size range untrimmed max.: 500 x 600 mm size range untrimmed min.: 50 x 50 mm product thickness standard max.: 4 mm

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 2.2m books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books) Dkjdpswu Sptofx Ag Toi

Condition: used, Product driven flow divider The filling flow divider can be used for several kind of products like meat, fish, pasta products, sauces and salads. Suitable for nozzles of max. 40 mm diameter. Width belt: 400 mm Product temperature up to ± 80 °C Dsdpfxeyn Dcke Ag Toki With universal connection With pneumatique knife 6 exits With support frame in height adjustable

Condition: new, Year of construction: 2021, New 4 Head Automatic Capper & Cap Feeder Never Used / New Dedpfxjv R I D Ho Ag Teki Model RCP-141 To include Capper Feeder & automatic capper machine

Condition: good (used), Year of construction: 2003, functionality: fully functional, Technical details working diameter max. 32 mm spindle passage 36 mm turning length 320 mm Control MITSUBISHI MELDAS 635LC Dkjdsyrn I Sepfx Ag Tsi travel max. (X1) 108 mm travel max. (Y1) 275 mm travel max. (Z1) 325 mm travel max. (X3) 238 mm travel max. (Z3) 410 mm main spindle speeds: 200 - 8000 U/min c-axis 0,001° deg. Subspindle spindle speeds 200 - 7000 U/min c-axis 0,001° deg. rapid traverse 20 m/min main drive 3,7 / 5,5 kW Subspindle motor 1,5 / 2,2 kW dimensions of machine 2,77 x 1,24 x 1,79 m weight of the machine ca. 2850 kg Additional information CNC Swiss-Type Lathe First put into operation December 2005 The machine was used for a single shift and is in good condition with no maintenance backlog. Equipment: FMB Turbo 5-42/3200C bar loader, built 2004 High-pressure pump Many collet chucks for main spindle Various collets Drive unit for synchronously driven guide bush Synchronously driven guide bush Drive unit for transversely driven spindle on linear support Pick-up spindle Collet chuck for pick-up spindle Blow-out device for pick-up spindle Five fixed tool holders on the rear Workpiece removal device Coolant tank Central lubrication system Door lock Ejection device for workpieces with through holes Machine documentation The machine will be sold without tools and extraction system.

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Dkjdsvtcviepfx Ag Tei Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Book thickness, Max: 60 mm, Min: 5 mm Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Compressed air required : 100 ltr/min.@ 6 bar

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. Dkjdjv Aalyspfx Ag Toi - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: good (used), Rarely available as a used machine. Leepack auto pouch filling system. Was packing sous vide meals. Dedpfx Aoyh Rageg Teki

Condition: new, 1 brand new semi-automatic high-performance horizontal band saw with double column guidance and 2° cutting angle relative to the table surface Manufacturer: HUVEMA / BEKA-MAK, Origin Turkey Model: BMSY 330 C Technical Data: - Cutting capacity 90° round: 330 mm - Cutting capacity 90° rectangular: 360 x 330 mm - Cutting capacity 90° square: 330 mm - Cutting capacity 45° round: approx. 250 mm - Cutting capacity 45° rectangular: approx. 250 x 325 mm - Cutting capacity 45° square: approx. 250 mm - Saw blade size: 5000 x 34 x 1.1 mm - Infinitely variable band speed: 20 -100 rpm - Working height: 635 mm - Motor power: 3 kW - Hydraulic motor: 0.55 kW - Dimensions (L x W x H): 2830 x 920 x 1630 mm - Machine weight: 1030 kg Accessories / Special Features: • Semi-automatic double-column band saw • Linear guides • 2° bevel cut to table surface • Infinitely variable cutting speed via potentiometer at control panel • Hydraulic vice • Hydraulic-mechanical saw blade tensioning • Powerful drive motor Dkjdpfx Agsfk Eu Ns Tsi • Sensitive cutting pressure regulation • Thermal overload protection • Optical height adjustment • Heavy-duty gearbox • Coolant system • Feed roller conveyor 1200 mm • Chip removal brush • 1 pc. Bi-metal saw band • Control panel • CE compliant Delivery time: approx. 8 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Year of construction: 2008, condition: good (used), Anko BFK-10 Automatic stir fryer Dksdpfoh N Slxsx Ag Tsi Capacity 60l, gas LPG, with a scraper and stirrer to scrape liquid eggs and stir fry ingredients, automatic temp control, variable speed, automatic tip discharge, suitable for cooking fried rice, fried noodle, dried meat cracker, dried meat floss, jerky, fried ground meat, ham, dried squid, steak, coffee, peanut, powder, bean, sugar coating, tea leaf, sesame, tofu, sticky rice and more, 3Ph

Condition: refurbished (used), Herma semi automatic wrap labeller, Allen Hotfoil Encoder, with spares and manual, all mounted on stainless table, 1Ph Dksdpfxeib Dcro Ag Tsi

Year of construction: 2007, condition: used, Europack Compact RTSW 2007, automatic sleeve wrapper, powered belt infeed, variable belt speed, adjustable tunnel & sealing temperature, teflon coated sealing jaw, aperture 350mm x 200mm, 3Ph Dkodsdbqxzepfx Ag Tei

Condition: used, Year of construction: 2000, Technical details: number of spindles: 6 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2000 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm pick-up unit, Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); Dkedoyqwvijpfx Ag Tsi coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *