Used Pipe Saw for sale (8,367)

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER S 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Fgjdpfx Ajywh Hmeansi

Condition: new, Year of construction: 2025, Cutting length: 3200 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: electric / NC control Saw blade tilt adjustment: electric / NC control Rip fence adjustment: electric / NC control Fedpfxsxzfwus Aanjgi Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Crosscut fence display: digital Saw blade diameter: 400 mm Motor output: 7 kW Motor brake: yes / automatic Extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 1025 kg

Condition: used, Year of construction: 1982, Technical details: dimensions of saw-band: 3920 - 4050 mm throat: 500 mm workpiece height: 400 mm table - inclinable: 15 - 30 Grad Cutting height: 400 mm band speed: 15 - 940 m/min Fodpfxjyzpknj Aanogi Table dimensions: 800 x 820 mm mm machine weight approx.: 1000 kg dimension machine approx.LxWxH: 1,3 x 1,3 x 2,2 m

Condition: as good as new (ex-display), Year of construction: 2026, Striebig CONTROL Type 6224 Cutting Area: L: 5300 x Hvertical: 2240 / Hhorizontal: 2100 x D: 80 mm Technical Data: Saw weight: approx. 1,200 kg Cutting depth: 80 mm Saw motor power: 5.5 kW (7.5 HP) Saw blade diameter: 300 mm Saw blade bore: 30 mm Emission sound pressure level at workstation LpA: 89.5 dB Fodpfxjy Ehnyj Aanegi Saw blade speed: 4,800 rpm 2 extraction ports Ø 140 mm Compressed air connection: 6-10 bar Connected load: 7.3 kW (max 10.7 kW) Power supply: 3 x 400 V / 50 Hz Continuously adjustable scoring saw unit (VSA) Small parts made of aluminium Free-standing support complete, type: 6 ExpertCut Machine data provision (Industry 4.0 ready) Striebig Service Data Import / Label Layout Customized configuration of data import interface and label layout. The customer’s .csv file is checked and tested with the import drivers for cutting optimization. The label layout is adapted and prepared to customer requirements. Location: ex-stock 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 1991, Cutting length: 5300 mm Cutting height: 2100 mm Cutting depth: 80 mm Scoring unit: no Feed: manual Horizontal cut display: scale Vertical cut display: scale Saw blade diameter: 300 mm Fjdey A Hknspfx Aanegi Swiveling material support: yes Saw blade speed: approx. 4000 rpm Motor power: 4 kW Machine length: 6500 mm Machine depth: 1500 mm Machine height: 2800 mm Weight: 800 kg

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Fgsdpfx Aoy E Hynoanji Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Condition: used, Year of construction: 1998, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Fjdpfey Hqdaox Aanegi Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction connection: 100 mm Weight: 490 kg

Condition: used, Year of construction: 1990, Wheel diameter: 440 mm Throat (frame opening): 390 mm Cutting depth: 280 mm Tilting table: yes, 0 to +20° Table size: 500 mm x 450 mm Blade speed: 18 m/min Motor power: 1.5 kW / 400V Fgedpsy Hqdmjfx Aanei Motor brake: yes / automatic Extraction connection: 2 x 100 mm Machine length: 780 mm Machine width: 585 mm Machine height: 1735 mm Weight: 190 kg

Condition: used, Year of construction: 1992, Technical details: tube diameter: 6 mm tube diameter max.: 16 mm bending angle max.: 90 ° Fgsdswivn Nopfx Aanei electrics - voltage/frequency: 220 / 50 V/Hz Total power requirement: 0,75 kW Weight approx.: 0,145 t machine dimensions LxWxH: ca. 1,0 x 0,8 x 1,2 m Application: Mini tube bending machine with free bending head. Processing of precision steel tubes according to DIN 2391/C, material 35.4 NBK Ø 6 - 16mm. -With hydraulic drive -8-fold bending preselection angle up to 180 -Pipe stop length 1m -Emergency stop button -mobile with parking brake -pivoting pipe head (vertical in horizontal position) -required hydraulic oil = approx. 20 liters (e.g. Esso Nuto 32) Accessories: various bending tools *

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID Double Miter Bandsaw GBS 250 Super AutoCut, Speed: 35 + 70 • Miter angle left: 60° + right: 45° • Quick-release clamping device, adjustable • Solid clamping device + machine casting • Ball-bearing swivel table • Hydraulic brake cylinder • Large, robust material support • Cooling system • Worm gear running in an oil bath • Enclosed saw frame • Adjustable ball roller bearing Fedpfx Aaor Ik Sqonogi • Tool compartment – door in the base • Cutting monitoring via ammeter • Cutting pressure feed rate regulator • Support roller (infeed side) • Machine base (delivered disassembled) GBS 250 Super AutoCut 3-Stage System: I. Automatic saw frame lowering via the hydraulic cylinder, steplessly adjustable feed rate, with limit switch at the end of the cut II. Fast lowering of the saw frame to the workpiece, then switching to normal sawing feed. (e.g., for scoring) III. Hydraulic cylinder acts as a brake cylinder: a) Manual operation (e.g., for ejecting) or b) Lowering in the rest position Saw band dimensions: 2765x27x0.9mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc. available upon request! Delivery time: from stock in Waiblingen, Beinstein.

Condition: good (used), mileage: 684,130 km, power: 338 kW (459.55 HP), first registration: 01/2011, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 12, emission class: euro5, Equipment: AdBlue, electric window regulation, spoiler, = Additional options and accessories = - Roof spoiler - Closed cab - Cab = Notes = YV2RT40A2TB557523 Volvo FH 460 EEV 6x2 Manual Euro 5 Fgedpfx Aozqdn Roansi Auxiliary heater 680,000 km 01-18-2011 MANUAL Straight exhaust pipes = Further information = Year of manufacture: 2011 Front axle: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 1: Tire size: 385/55R22.5; Lift axle; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 2: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% Number of cylinders: 6 Technical condition: good Optical condition: good

Condition: good (used), Year of construction: 2008, Striebig Panel Saw Compact 5220, Year of Manufacture: 12/2008 Solid, self-supporting, firmly welded saw frame with high torsional rigidity Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Fgodpfx Aaezp Nt Aonei Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Braun Canali band saw / resaw, type 1100, manufactured in 1978. The machine is in very good used condition and is designed for professional use in sawmills or for solid wood processing. The machine is particularly suitable for cutting and resawing logs and boards and features a continuously variable feed rate and a cutting depth control. Technical data: Manufacturer: Braun Canali Type: 1100 Year of manufacture: 1978 Machine no.: 6234 Motor power: 15 kW Saw band length: 6,800 mm Saw band width: 60–100 mm Roller diameter: approx. 1,100 mm Continuously variable feed rate Weight: approx. 3,800 kg Can cut logs up to approx. 3,000 mm in length × 600 mm in diameter Equipment: Resawing device for cutting logs and boards Programmable cutting depth control ELGO Electric Type 87P Pneumatic lifting unit Cutting depth programmable – programming function currently defective Cutting depth can be adjusted manually on the control panel: 15–85 mm Heavy-duty industrial design Condition and scope of delivery as per photos Important note regarding the control system: Fgsdpfezxrtqox Aansi The programmable cutting depth control is currently not functional. However, the cutting depths can be adjusted manually via the control panel from 15 to 85 mm. Additional information: The lower band saw wheel protrudes approx. 300 mm below floor level. Therefore, a corresponding floor recess is required for the installation of the machine. Overall, the machine is in very good used condition. Inspection and demonstration possible by appointment. The machine is currently still at the customer's site but would be available in the short term! Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2002, Sled length: 3000 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring blade: no Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Fodpfx Aaezhm Dpsnjgi Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Crosscut fence with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Year of construction: 2013, condition: good (used), Robust and compact bridge saw with a fixed bridge for cutting stone tiles and slabs up to 800 mm in length: Fjdezu A N Iopfx Aanegi Special design of the carriage for maximum cutting precision; Water collection tray with integrated water circulation system for cooling the blade; Robust and compact construction. Roller conveyor at the front Roller conveyor at the rear Saw blade size: 350 mm Motor power: 2 kW Voltage: 230 volts Weight: 173 kg Mobile Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Catalog number: 7878 TECHNICAL DATA - track width: 220mm - shaft width: 200mm - max. blade diameter: 350mm - blade bore diameter: 70mm - max. cutting height: 120mm - table width with clearance: 1100mm - table length: 1640mm - from above: - row of pawls/ejectors - 1 metal feed roller - pawls - metal feed roller - shaft with blades - 2 metal feed rollers - from below: - guide rail - pawls/ejectors - track - stepless feed speed adjustment via a frequency inverter - feed motor: 1.1kW - main motor: 29kW - central track lubrication - dust extraction nozzle diameter: 180mm - overall dimensions (L/W/H): 2000x1600x1500mm - weight: 1480kg ADVANTAGES - Made in Italy - Multi-blade saw, used - Very good condition Net price: 27,900 PLN Net price: 6,488 EUR, depending on the exchange rate of 4.30 EUR Fgedo Aguicjpfx Aanji (Prices are subject to change due to significant fluctuations.)

Condition: excellent (used), CATALOGUE NUMBER 8031 TECHNICAL DATA - track width 300mm - working width of the roller 300mm - max. blade diameter 350mm - blade arbor diameter 70mm - max. cutting height 120mm - table width with extension 1030mm - table length 1740mm * top: - anti-kickback pawls (barrier to prevent material from recoiling) 2 rows - sliding roller, metal, pressure roller - anti-kickback pawls/latches - sliding roller, metal, pressure roller Fgsdpo Aguk Nofx Aanoi - saw arbor - 2 smooth, metal sliding rollers * bottom: - guide strip - anti-kickback pawls/latches - track - central electric track lubrication - stepless feed rate adjustment - feed motor 1.1kW - main motor 25kW - diameter of the dust extraction nozzle 1x200mm, 1x120mm - overall dimensions L/W/H 2550x1800x1450mm - weight 1770kg ADVANTAGES - Made in Italy - Unpainted - Very good condition - Used multi-blade saw Net price: 57900 PLN Net price: 13470 EUR depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Year of construction: 2023, Max. cutting width: 4600 mm Max. cutting height, horizontal: 1958 mm Max. cutting height, vertical: 2070 mm Fsdpfx Aaj Agw H Tonsgi Max. processing thickness: 60 mm Saw blade diameter: 250 mm Motor power: 4 kW Saw blade arbor: 30 mm Bottom support: fixed rollers Material support: aluminum lath grid with plastic pads Small parts support: yes Measuring system: scale Saw head swivel: manual Mounting: free-standing Extraction: external extraction required Weight approx.: 910 kg Extraction diameter: 2x100 mm Storage location:

Condition: used, Year of construction: 2001, turning speeds 15/30 U/min saw blade diameter max. Ø 370 mm Vice opening 180 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100x100 mm capacity 90 degrees: flat 180x100 mm 105 mm 100x100 mm 130x100 mm 120 mm 100x100 mm 130x100 mm weight of the machine ca. 400 kg Fgedpfx Aas Agpgxjnsi dimensions of the machine ca. 1100x900x1850 mm

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 2500 mm Cutting width at the width stop: 1200 mm Cutting width at the cross-cut fence: 2500 mm Cutting depth: 100 mm Scorer: yes Height and tilt adjustment of saw blade: handwheel Width stop adjustment: manual Saw blade angle display: Scale Cutting height display: Scale Width stop display: Scala Cutting ruler display: Scala Saw blade diameter: 300mm Speeds: 4000 rpm Motor power / saw: 4.4 kW Motor brake: yes / automatic Tiltable cutter arbor: yes 0 - 45° Fedpfxetpivkj Aansgi Milling arbor height and tilt adjustment: handwheel Milling arbor height and tilt indicator: Scale Milling arbor: 30mm Milling arbor speed: 3000 / 6000 / 7500 / 10000 rpm Max. Tool diameter: 180 mm Motor power / cutter: 4.4kW Suction connection: 100 mm, 100 mm, 80 mm Machine length: 2500mm Machine width: 1500mm weight: 530kg

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. Fgedsu Nigwepfx Aanoi microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min Fjdpfju Niuzsx Aansgi cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: used, Year of construction: 1979, Technical details: throat: 410 mm dimension machine xH: 1,15m x 0,8m x 2,0m m Fgsdpfx Aeu Niu Usanei Vertical band saw with saw band welding device. The table is tiltable. *

Condition: used, Costa multi-blade saw -Type Lince -max. cutting height 140mm -motor 30kW Fedpevw Rplefx Aansgi

Condition: used, Year of construction: 1999, Carriage length: 3800 mm Cutting width at the width stop: 1500 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 140 mm Fsdpfxovxi Ddo Aansgi Scoring unit: no Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3900mm Machine width: 2200mm weight: 1000kg