Used Power Amplifier for sale (40,532)

Condition: used, Year of construction: 2016, Lifting capacity: 150 kg Please contact Gebrauchtgeräte Center for more information Crjdpfszm E Auox Ab Dsg

Condition: excellent (used), Year of construction: 2008, operating hours: 84,000 h, functionality: fully functional, power: 526 kW (715.16 HP), type of cooling: air, input frequency: 50 Hz, Jenbacher J312GS hours: 84,000 hours overhaul at 60,000 hours. Year: 2008 Crjdpfxjzwpnpj Ab Dsg Rated power: 526KW Frequency: 50HZ Very well looked after unit was installed in a hospital and serviced and maintained regularly.

Year of construction: 2015, condition: good (used), functionality: fully functional, For sale is a HAIMER Power Clamp 2006 Economic NG including a HAIMER tool cooling unit. This system is ideally suited for shrinking and then rapidly cooling tool holders. Technical data: * Manufacturer: HAIMER * Type: Power Clamp 2006 Economic NG * Year of manufacture: 2015 * Serial number: 7105551 * Includes HAIMER AirCool tool cooling unit Crsdpozwptfsfx Ab Dog * 400-volt connection * Adapters SK40, SK50, HSK 63 Condition: The system is in good, used condition. Inspection and functional testing are possible by appointment. Shipping is possible. Please contact us if you have any questions or would like to see a functional video. Note: The sale is made by a commercial seller. The stated price includes the statutory value-added tax. You will, of course, receive an invoice with the VAT shown. Subject to change, prior sale, and errors.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Wavelength: 635 nm Output power: < 1 mW MACHINE DETAILS Ambient temperature: 10–40 °C Relative humidity: < 95% (non-condensing) Connected power: 37 kW Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Maximum inlet pressure: 6 bar Crsdpjzncm Hjfx Ab Deg Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Operating hours (according to meter): 27,875 h

Condition: used, Year of construction: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode Year of manufacture: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Injection pressure: 1,714 bar Credpozy Ilfefx Ab Dog Shot volume: 442 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 520x470 mm Dimensions of platens: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6P - touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total operating hours: 36,714 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Main drive motor - servo motor driven by inverter - energy saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82x1.42x2.20 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: new, Year of construction: 2025, functionality: fully functional, type of cooling: water, total width: 1,150 mm, total length: 2,500 mm, total height: 1,300 mm, fuel: diesel, overall weight: 1,410 kg, cubic capacity: 5,320 cm³, noise level: 68 dB, power: 80 kW (108.77 HP), battery voltage: 24 V, Equipment: documentation/manual, Warehouse clearance, everything must go: HELVETICA POWER® 100 KVA / 80 KW emergency power generator, diesel generator, power generator ⭐️ CE-compliant according to applicable regulations ⭐️ with 100% "brushless" copper alternator, Stamford type: "CE"-certified high-quality synchronous alternator with 100% copper winding! ⭐️ digital control with remote control for operation as an emergency power generator – new! ⭐️ "Diesel engine from RICARDO ("KOFO" premium series) ⭐️ including ATS unit for emergency power operation ⭐️ Super-Silent type, noise (LP1m) < 68 dB ⭐️ Diesel particulate filter and air filter in stock About the engine manufacturer Ricardo ⭐️ Ricardo has been building ship diesels for almost 100 years and is a leading engine manufacturer in this field. ⭐️ This engine comes from the premium series – a top-of-the-line unit with top-quality components Warranty · Guarantee · Service ⭐️ One year manufacturer's warranty! ⭐️ Optional: 2-year warranty/guarantee, which goes far beyond the usual (can be extended if required). ⭐️ Our insurance partner: Allianz Suisse / Allianz Deutschland (for Europe) Csdpfszwfk Tex Ab Derg ⭐️ Switzerland-wide and Europe-wide service available. Payment · Delivery ⭐️ Payment: upon purchase 🚚 Collection: Konstanz warehouse (Germany) 🚚 Delivery: possible throughout Germany (mainland) for an extra charge – worldwide delivery on request Other models & configurations ⭐️ Are you looking for a different unit? ⭐️ More or less kW, alternative engine (e.g. Cummins, Deutz, Volvo) ⭐️ larger tank, additional tank or tank and water heater ⭐️ individual configuration is possible Technical data Rated power: 80 KW/100 KVA 50 Hz 220V / 400V - three-phase water-cooled, with 1500 revolutions with AVR (for load-dependent speed control) large tank for 8 hours of operation Size: 2500x1150x1300mm Weight: 1410kg including sockets: 1x 230 V / 16 A 1x CEE 400 V / 32 A 1x CEE 400 V / 32 A 2x CEE 400 V / 63 A Other When using your power generator, please pay attention to the relevant guidelines that must be followed. Keyword list: power generator, generator, emergency power unit, emergency generator, power generator, energy generator, power unit, unit, mains replacement system, NEA, emergency power, backup power, backup electricity, power supply, power source, self-sufficient power supply, island operation, construction power, construction site generator, event power, camping power, outdoor power supply, diesel generator, gasoline generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, AC generator, 230V generator, 400V generator, high-voltage generator, small generator, industrial generator, professional generator, high-performance generator, quiet generator, silent generator, sound-insulated generator, mobile generator, portable generator, stationary generator, home emergency power, commercial power, industrial power, agricultural generator, construction site equipment, workshop power, server emergency power, PV emergency power, hybrid generator, ATS, changeover switch, power distributor, CEE

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 5 h, load capacity: 30,000 kg, fuel type: electric, power: 0.8 kW (1.09 HP), Power Attack towing device for heavy-duty transport trolleys/tank rollers up to 30 tons/30,000 kg PowerAttack MTC 30 CC Cordless 0 - 20 m/min (forward and reverse drive) 24V three-phase motor (3,000 rpm) Operating time: 4h Charging time: 5h Length: 1650 mm 2-stage telescopic lever arm, each step 250 mm, maximum length 2150 mm Track width: 380 mm Weight: 70 kg Scope of delivery includes a charger with 2 batteries, each with 22.5 Ah capacity. Operating duration approx. 4 hours. Charging time approx. 5 hours. Includes the accessories shown in the picture. Csdoy D Ea Rspfx Ab Dsrg NEW PRICE As new condition – see pictures Pick-up only by appointment in 75053 Gondelsheim Shipping via freight forwarder possible; please inquire with your ZIP code.

Year of construction: 2005, condition: like new (used), Climbing equipment / Facade climbing equipment Power Climber Facade lift / Facade climbing platform Cedpohydxzofx Ab Djrg This equipment comes from government property and, according to the government agency, has never been used. I can load the equipment onto a truck and/or ship it!

Condition: used, Year of construction: 2016, Lifting capacity: 150 kg Crodpfxszt U Ums Ab Dsg Please contact Gebrauchtgeräte Center for more information

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 10,740 h, machine/vehicle number: 1951 F 262, laser power: 4,000 W, travel distance X-axis: 4,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,020 mm, swivel angle B-axis (min.): -135 °, swivel angle B-axis (max.): 135 °, TECHNICAL DETAILS Linear axis travel paths (XYZ): 4,500 x 2,500 x 1,020 mm Rotary axis travel paths: A-axis ± 360º continuous, B-axis ± 135º C-axis: ± 10 mm Max. speed of linear axes (XYZ): 50 m/min Combined speed of linear axes: 85 m/min Max. speed of rotary axes A, B: 540 °/s Acceleration of rotary axes A, B: 60 rad/s² Laser type: CV4000 Laser Installed laser source power: 4,000 W MACHINE DETAILS Operating hours: 10,740 h Power supply: 400 V, three-phase, 50 Hz Installed cooling unit power: 53 kW / 58 kVA Extraction and dust collection system power: 15 kW / 18 kVA EQUIPMENT - OPTIMO machine Cjdpfjxd Um Rsx Ab Dsrg - CNC control panel: P30L S/N 15/40 - 0083-01 - Prima Power remote control, serial number: 14/06 00489 - Hyfra Sigma 52-S cooling system - Donaldson DFPRO12 extraction and dust collection system - Donaldson MD2 micro-dosing system The machine is powered, however, air and gas supply are required. These are not available on site. Dismantling and loading can be arranged by a company for approx. €22,000.

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm Credszimcbjpfx Ab Djg - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: excellent (used), Year of construction: 2015, Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 2015 Crsdpfx Aszy Ikzsb Dsg Injection Unit: Screw diameter: 35 mm Shot weight: 175.6 g Injection pressure: 2743 bar Dosage volume: 193 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 0x0 mm Platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Vertical injection moulding machine with rotary table Hybrid machine: high-speed, energy-saving, and very quiet Air valve x 5 Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and corrosion-resistant Rotary table diameter: 1500 mm Rotary table driven by a servomotor, controlled by an inverter Dimensions: Weight: 11,300 kg Length/Width/Height: 3.83x1.50x4.07 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Scrap conveyor was installed on a Laser Next 1530 built in 2019, but was only used sporadically and was eventually dismantled. All parts on the belts are the complete attachments to the machine. Prima Power Art. No. D5.57H Steel conveyor belt for automatic turntable. Conveyor length to start of high conveyor: approx. 292 cm, high conveyor length approx. 160 cm. Total length approx. 452 cm. Conveyor height approx. 140 cm. Extension approx. 366 cm. Conveyor belt width approx. 67 cm. Conveyor width approx. 94 cm. Cedpfx Absvcpi Ie Djrg Sale ex works without guarantee and return.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 174146, fuel type: gas, color: blue, power: 10,000 kW (13,596.20 HP), nominal power: 10,000 kW (13,596.20 HP), nominal power (apparent): 12,163 kVA, 10MW Wärtsilä AMG Gas Power Plant with Heat Recovery Primary Power Generation: Wärtsilä W20V34SG Gas Engine - Output: 10,000 kW (10 MW) - Configuration: 20‑cylinder, spark‑ignited gas engine - Fuel: Natural gas - Year: 2013 Crodpeygx Tzefx Ab Deg Electrical Generation: AMG 1120LT08 DSE Generator - Rating: 12,163 kVA - Year: 2013 Heat Recovery System: Cochran Waste Heat Boiler - Thermal Output: 17,500 kW - Year: 2013 Cochran Economiser – Waste Heat Recovery Unit - Thermal Output: 2,719 kW - Year: 2013

Condition: new, Year of construction: 2025, functionality: fully functional, type of cooling: water, total width: 1,150 mm, total length: 2,600 mm, total height: 1,450 mm, fuel: diesel, overall weight: 1,495 kg, continuous power (apparent): 125 kVA, continuous power: 100 kW (135.96 HP), cubic capacity: 5,320 cm³, fuel tank capacity: 240 l, battery voltage: 24 V, Equipment: documentation/manual, Warehouse clearance – everything must go! HELVETICA POWER ® 125 KVA / 100 KW emergency power generator, diesel generator, power generator Crodezwfpiepfx Ab Djg ⭐️ CE-compliant according to applicable regulations ⭐️ with 100% "brushless" copper alternator, Stamford type: "CE"-certified high-quality synchronous alternator with 100% copper winding! ⭐️ digital control with remote control for operation as an emergency power generator – new goods!!! ⭐️ "Diesel engine by RICARDO ("KOFO" Premium series) ⭐️ including ATS unit for emergency power operation ⭐️ Super-Silent type, Noise (LP1m) < 68 dB ⭐️ Diesel particulate filter and air filter in stock About the engine manufacturer Ricardo ⭐️ Ricardo has been building ship diesels for almost 100 years and is a leading engine manufacturer in this field. ⭐️ This engine comes from the Premium series – a top-of-the-line device with top components. Warranty · Guarantee · Service ⭐️ One-year factory warranty! ⭐️ Optional: 2-year warranty / guarantee, which goes far beyond the usual (can be extended if required). ⭐️ Our insurance partner: Allianz Suisse / Allianz Deutschland (for Europe) ⭐️ Switzerland-wide and Europe-wide service available. Payment · Delivery ⭐️ Payment: upon purchase 🚚 Collection: Konstanz warehouse (Germany) 🚚 Delivery: possible throughout Germany (mainland) for an extra charge - worldwide delivery on request Other models & configurations ⭐️ Are you looking for a different unit? ⭐️ More or less kW, alternative engine (e.g. Cummins, Deutz, Volvo) ⭐️ larger tank, additional tank or tank and water heating ⭐️ individual configuration is possible at any time Technical data Rated power: 100KW/125KVA 50Hz 220V / 400V - three phases water-cooled, with 1500 revolutions with AVR (for load-dependent speed control) large tank for 8 hours of operation Size: 2600x1150x1450mm Weight: 1495kg including sockets: 1x 230 V / 16 A 1x CEE 400 V / 32 A 1x CEE 400 V / 32 A 2x CEE 400 V / 63 A Other When using your power generator, pay attention to the relevant guidelines to be followed. Keyword list: power generator, generator, emergency power unit, emergency generator, power generator, energy generator, power unit, unit, mains replacement system, NEA, emergency power, backup power, backup power supply, power supply, power source, self-sufficient power supply, island operation, construction power, construction site generator, event power, camping power, outdoor power supply, diesel generator, gasoline generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, AC generator, 230V generator, 400V generator, high-voltage generator, small unit, industrial unit, professional generator, high-performance unit, quiet generator, silent generator, soundproof generator, mobile generator, portable generator, stationary generator, home emergency power, commercial power, industrial power, agricultural generator, construction site equipment, workshop power, server emergency power, PV emergency power, hybrid generator, ATS, automatic transfer switch, power distributor, CEE generator, high-voltage connection, generator with AVR, voltage regulator, power generator, power device, emergency power device, diesel unit, construction site unit

Condition: used, Year of construction: 2010, fuel type: electric, Lifting capacity: 200 kg Codpfjzfk Sxex Ab Derg Please contact Gebrauchtgeräte Center for more information

Condition: ready for operation (used), Year of construction: 2017, operating hours: 18,924 h, laser power: 3,000 W, travel distance Z-axis: 150 mm, overall weight: 11,000 kg, number of axes: 3, This 3-axis Prima Power Platino 1530 was manufactured in 2017. It features a 3 kW CO₂ laser, a working area of 3000 × 1500 mm, and can handle mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. It includes an automatic pallet changer and a CNC Touch Interface. If you are looking to get high-quality laser cutting capabilities, consider the Prima Power Platino 1530 machine we have for sale. Contact us for more information. • Working area (X × Y): 3000 × 1500 mm • Positioning accuracy: ±0.05 mm • Repeatability: ±0.03 mm • Drive system: CNC-controlled with brushless servo motors • Control unit: Prima Power CNC Touch Interface • Cooling: Water-cooled • Fume extraction system: Integrated • Total operating hours: 18,924 h Additional equipment • Automatic pallet changer Cjdpfxex D Nyxo Ab Djrg

Condition: used, Year of construction: 2011, 2011 | Power Towers Nano Sp | Used Scissor Lift 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 2500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 38 inspection points 38 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: unit well operational 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41235 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Cedpfx Aezw N Trob Djrg

Condition: used, Year of construction: 2011, 2011 | Power Towers Nano Sp | Used Vertical Mast Lift 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 2500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Cjdpfx Abjzw Nrhs Derg 👷‍♂️ Inspected by an independent expert 39 inspection points 39 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: well working unit 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41234 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), functionality: fully functional, Year of construction: 2013, load capacity: 200 kg, lifting height: 4,500 mm, platform length: 1,195 mm, platform width: 750 mm, overall weight: 485 kg, empty load weight: 285 kg, Power Towers Nano Vertical Manlift – Year of Manufacture 2013 – Used For sale is a used Power Towers Nano Vertical Manlift from the year 2013. This compact, self-propelled aerial work platform was specifically designed for work in confined indoor spaces and impresses with its high maneuverability, ease of operation, and low weight. It is ideal for maintenance, installation, electrical, painting, and renovation work. Technical Data: Manufacturer: Power Towers Model: Nano Vertical Manlift Year of Manufacture: 2013 Self-propelled Maximum working height: approx. 4.50 m Compact design – ideal for narrow passages and indoor areas Low weight – also suitable for sensitive floors The aerial work platform is in used, functional condition and shows the usual signs of wear and tear for its age. If you are interested or have any questions, please do not hesitate to contact us. An inspection can be arranged at any time by prior appointment. *Working Dimensions* - *Maximum working height*: 4.50 m - *Maximum platform height*: 2.50 m - *Platform dimensions*: 1.00 m x 0.73 m - *Footprint*: 1.19 m x 0.75 m - *Permissible load capacity*: 200 kg (1 person + tools) - *Max. manual force*: 200 N - *Max. slope during operation*: 0° - *Max. wind speed*: Only for indoor use, 0 mph - *Manual pushing force on level ground*: 9 kg - *Max. total weight including payload*: 485 kg - *Max. load at wheel contact point*: 180 kg (1.77 kN) - *Max. wheel force*: 1.75 kN *Dimensions in folded state* - *Length*: 1.195 m Cjdpfozmfrpox Ab Djrg - *Width*: 0.750 m - *Height*: 1.560 m - *Weight*: 285 kg *Power Supply* - Standard 12V DC electric motor - Or 240V AC electric motor 13A connection - Or 110V AC electric motor 16A connection *Battery Charger - Technical Data* - *Input voltage*: - Single voltage: 90-135V AC (UK) / 180-265V AC (outside UK) - Dual voltage: 90-265V AC - *Frequency*: 45-65 Hz - *Output*: 12V DC, 7A - *Sound power level*: Less than 70 dBA - *Emissions EN 55014N, EN 61000-3-2*

Condition: ready for operation (used), Year of construction: 2012, laser power: 3,000 W, overall weight: 12,000 kg, total height: 3,200 mm, number of axes: 5, This 5-axis Prima Power Rapido was manufactured in 2012, featuring a cutting area of 4080 mm (X) × 1530 mm (Y) × 765 mm (Z) and a laser power of 3000 W. It handles 3D sheet metal parts efficiently with speeds up to 60 m/min. Ideal for automotive and aerospace applications. If you are looking to get high-quality cutting capabilities consider the Prima Power Rapido machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Cutting area: 4080 mm (x) × 1530 mm (y) × 765 mm (z) Cjdpfx Aex D Efksb Djrg • Axis speed: up to 60 m/min (x/y) • Repeatability: ±0. 05 mm • Applications: automotive, aerospace, metal forming industries • Workpiece type: 3d sheet metal parts, tubes, formed parts • Cutting capabilities: steel, stainless steel, aluminum, and other metals Extra Information Machine still under power Dimensions Machine Depth 9000 mm

Year of construction: 2011, condition: ready for operation (used), A Prima Power CO2 laser cutting system is available. 1) Prima Power Platino 1530, year of manufacture: 2011, travel X/Y/Z: 3000mm/1500mm/150mm, rapid traverse: 100m/min, position accuracy: 0.03mm. 2) Prima Power CP 3000, year of manufacture: 2010, laser power: 3000W, power stability: +/- 2%, wavelength: 10.6µm, laser diameter: 19mm, dimensions X/Y/Z: approx. 900mm/3100mm/900mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Available from Q1 2025. Codpfxot Nhm Ij Ab Djrg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 26,437 h, laser power: 3,000 W, travel distance X-axis: 3,065 mm, travel distance Y-axis: 1,560 mm, travel distance Z-axis: 150 mm, overall weight: 10,000 kg, total height: 2,200 mm, This Prima Power Platino Fiber laser cutting machine was manufactured in the year 2014 in Italy and has 31631 worktime hours, of which 10574 are laser emission hours. The machine has a laser power of 3 kW. Machine Benefits Qualitative Machine Benefits • Low hours Technical Machine Benefits • Fiber laser 3000w Crjdpfxezvu Nve Ab Deg • 2 tables • Work feed x/y 100 m/min Dimensions Machine Depth 3757 mm

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,610 kg, fuel type: diesel, color: yellow, power: 100 kW (135.96 HP), output current: 180 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 100 kW (135.96 HP), nominal power (apparent): 125 kVA, continuous power: 100 kW (135.96 HP), continuous power (apparent): 125 kVA, total length: 2,900 mm, total width: 1,150 mm, total height: 1,600 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei EURO 5, type of cooling: water, emission class: euro5, Equipment: AdBlue, HELVETICA POWER offers: 125 KVA generator with 100% copper alternator, digital control, and ATS unit for emergency power operation. Remote control is built-in. With Oil- and water Heater. CE-certified Yunnei Stage V diesel engine suitable and approved for continuous operation in accordance with applicable emissions standards. Stamford type: CE-certified quality brushless synchronous alternator with 100% copper winding! Delivery (surcharge) possible worldwide. Optional: Looking for something else? More or less kW, a different engine (Cummins, Deutz, Volvo, etc.), a larger tank, an additional tank - contact us. We can also customize your generator. Pickup: from our warehouse in Konstanz (Germany) or Kefikon (Thurgau). Delivery is available. Worldwide delivery is possible. Dealer inquiries welcome - please contact us. We have various emergency power generators (from 7 kW to 100 kW) available from stock in Switzerland and Germany. We also have various power generators with STAGEV engines in various sizes available from stock in Switzerland and Germany. Crodpfx Abjyvktas Dsg

Condition: used, Year of construction: 2019, Lifting capacity: 150 kg Cjdpfezpdraex Ab Dsrg Please contact Gebrauchtgeräte Center for more information