Used Power Sources for sale (39,196)

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Iasdpfxszdny Ro Ag Usu Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2020, Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Iaedpfx Ageywgxbj Usu -Hydraulic power unit: with hydraulic reservoir and control unit -Hydraulic pump: Pressure up to 100 bar -Flow rate: 6 l/min -Motor: 3 kW / 1410 rpm -Hydraulic tank/filter/valves: see pictures -Key switch: CNC Electric COB-62C -Dimensions: 470/450/H685 mm -Weight: 84 kg

Condition: excellent (used), Here, we offer a laser beam source from Coherent. Designation: AVIA 355-X Operating hours: Diodes 43022/43022, Head 42955 Crystal Shifter: 1845.91 hours Wavelength: 355nm Excitation: diode-pumped Laser type: Nd:YAG laser Laser type 2: THG, Q-Switch Operating mode: pulsed Laser power: 10 W at 60 kHz Beam divergence: Iasdpfx Aezdy H Aog Ueu

Condition: good (used), RMS RMS vibration exciter with power amplifier and cooling fan. Vibration exciter SW 1511/2 Power amplifier TGD 3000-000 00 Input: 3x400V-50Hz, 14.5 kVA Cooling fan SWG 108 Condition: used Scope of delivery: (See image) Iaodpfx Aozdry Usg Ueu (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: good (used), Here we offer a laser beam source from Coherent mti PC. Designation: AVIA 355-X Ijdpfxszdrpce Ag Uoau Operating hours: Diodes 1975/1975, Head 26488 Wavelength: 355 nm Excitation: diode-pumped Laser type: Nd:YAG laser Laser type 2: THG, Q-Switch Operating mode: pulsed Laser power: 10 W at 60 kHz Beam divergence:

Condition: used, Year of construction: 2016, Year of manufacture: 2016 Isdjzd E Daopfx Ag Ujau Technical condition: good Please contact Vitali Lenda for further information.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 80 t, stroke length: 60 mm, Power: 80 Ton Table size: 680 x 540 mm Strokes per minute: 60/min. Stroke: 60 mm Throat depth: 275 mm Gap in bed: 150 mm Controll: 2- hand controller Iaodpfx Agezbvvvo Uju Country of origin: Netherlands Motor power: 4 kW Machine (L×W×H): 175 x 100 x 235 cm Machine weight: 3700 kg

Condition: excellent (used), BUEHLER Beta 49-5100-230D with Vector Power Head Manufacturer: BUEHLER / Wirtz-Buehler Type: Beta Grinder-Polisher Model: 49-5100-230D Machine Type: Metallographic Grinding and Polishing Machine For sale is a metallographic grinding and polishing system from BUEHLER, including Vector Power Head and extensive accessories. The system was developed for the preparation of metallographic samples in laboratories, quality assurance, and material testing. Technical Data Mains connection: 230 V Frequency: 50 Hz Current consumption: 1.6 A Protection class: I Degree of protection: IP20 Grinding wheel speed: 30 - 600 rpm, steplessly adjustable Wheel diameter: 203 mm (8") or 254 mm (10") Power consumption of the base unit: approx. 575 W Vector Power Head Semi-automatic sample processing system Power Head speed: 60 rpm Timer function integrated Automatic force application Single and central pressure operation possible Water and dispenser control Iajdpszc Hlkjfx Ag Uou Sample capacity, single holder: up to 4 samples Sample capacity, central holder: up to 6 samples Pressure force, single sample: 0 - 75 N Pressure force, central holder: 20 - 300 N Compressed air requirement: approx. 6 bar Equipment BUEHLER Beta Grinder-Polisher Vector Power Head Sample holders Consumables as shown in the pictures Polishing cloths Grinding media Documentation and catalogs Further accessories according to the scope of supply Application areas Metallography Material testing Material analysis Quality assurance Research and development Laboratory applications Sample preparation Condition Used Optical condition as shown in the pictures Inspection possible by appointment. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 2008, Inverter welding machine, power source, digital control inverter -Manufacturer, Type: OTC DAIHEN, DP-500 -Welding current range: 500A 60%, 350A 100% -Mains connection: 400 V -Software version: P10499 Ver003. 200,000 Accessories: as shown in the pictures -Dimensions: 700/300/H600 mm -Weight: 57 kg Iaodpfx Agjzck Rds Usu

Condition: good (used), Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: LinMot, Switching Power Supply 72V/1000W -Type: S01-72/1000 -Mains voltage range: Ue. AC 3 x 340-550V / 50/60Hz. -Dimensions: 270/65/H195 mm Ijdpjxvrwdjfx Ag Usau -Weight: 2.1 kg

Condition: refurbished (used), Refurbished by a service partner Isdezd N E Uopfx Ag Ueau Siemens SIMODRIVE 611 Power Module 400A 6SN1123-1AA00-0KA0 Manufacturer: Siemens Series: SIMODRIVE 611 Type: Power Module Design: 1-axis module Rated current: 400 A Part number: 6SN1123-1AA00-0KA0 Serial number: T-K22036996 Condition: Refurbished spare part Date of manufacture: 05.09.2013 Origin: Germany Packaging: Original box

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, CNC Universal 5-Axis Tool-and Cutter Grinder CNC Control HMC 400 CNC X-axis movement 400 mm Y-axis movement 250 mm Z-axis movement 580 mm C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Spindle speed (grinding) 3000 / 6000 R/Min Iaedpszavqwsfx Ag Uou If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2007, continuous power: 625 kW (849.76 HP), Engine power: 625 kW presumably 810 kVA Generator: HCI, 634G kVA 810 Test run not possible Operating hours unknown with a flatbed semi-trailer, Krone, SDP 27 - without TÜV (German technical inspection) Note: Iajdpfxozdykue Ag Usu - Loading is possible (however, this would have to be paid for separately on site).

Condition: ready for operation (used), AGIE PMO-03 A Power Module Output 616021.2, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Isdpfei D Txijx Ag Usau

Condition: new, Siemens 6RA4001-1AA01 Simodrive Power Supply < unused > in opened original packaging, 100% functional. Ijdpfoxagwaox Ag Uoau

Condition: ready for operation (used), Okuma DC-S1A DC Power Supply 4 Axes CZ-270C , serial no. according to photo ,used, normal signs of use, 100% functional Iodsi Ecanopfx Ag Ueau

Condition: ready for operation (used), Okuma OPUS 5000 GHP Power Supply 5000T SN: 00198 , serial no. according to photo ,used, normal signs of wear, 100% functional Isdpfx Aji Ecareg Ujau

Condition: ready for operation (used), Contraves PS 700 DC Power Supply , used, good condition, 100% functional Ijdpfx Asi D Umhjg Ueau

Condition: ready for operation (used), Bosch NT 600 Power Supply, serial number as per photo, used, minor signs of wear, 100% functional Isdpfxei D Uarj Ag Ujau

Condition: ready for operation (used), Indramat TVM 2.1-50-220/300-W1-220/380 AC. Servo Power Supply, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Ijdji Ebrgepfx Ag Ujau

Condition: ready for operation (used), Bosch NT600 Power Supply . Power supply , used, normal signs of wear, 100% functional, scope of delivery as per photos Iedpfx Agei D Uaye Uoau

Condition: ready for operation (used), BR-Automation 5PP120.1043-37A Power Panel, serial number as per photo, used, display foil damaged (see photo 2), otherwise normal signs of use, 100% functional, scope of delivery as per photos Iodpfoi D Uh Iox Ag Ujau

Condition: ready for operation (used), Marposs 6366160401 Power Supply 706 C365 330/20W 100-120/200-240V-AC 50-60 Hz, used, in good condition, 100% functional, scope of delivery as per photos. Iaodpfx Agoy Nryno Usu

Condition: ready for operation (used), Indramat TVM 2.1-50W1-220V A.C. Servo Power Supply , used, normal signs of use, 100% functional Iedpfxji Ebrke Ag Uoau

Condition: ready for operation (used), AGIE PMO-02 A2 Power Module Output 614030.5, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Ijdpji D Txfsfx Ag Usau