Used Promatic P for sale (40,157)

Year of construction: 2014, condition: used, ROMACO PC 4250 PROMATIC CARTONING MACHINE Horizontal continuous motion cartoning machine, for the packaging of strips, sachets, and other similar products. Built in 2014. - Leaflet folder GUK RS21/760 (from reel) - Barcode reader Laetus Argus WT10 (with integrated camera CoCam 880 for leaflets and cartons) - Hot-melt gluing Nordson ProBlue unit, with automatic refilling (capacity: up to 270 cartons per minute) - Total weight: 3100 Kg PRODUCTION - Output: up to 270 cartons/min - Carton Size Range: 20 x 15 x 60 mm (min); 120 x 80 x 210 mm (max) ENERGY REQUIREMENTS Bedjz Az Hqspfx Al Ajln - Power requirements: 400 V; 60 Hz; 9 Kw; 3+N+PE - Air pressure: 6 bar

Condition: like new (used), Year of construction: 2020, Year 2020 Cutting length 3200mm Cutting Thickness 4mm Edwards Pearson CNC Control Bledpfsz Hdw Uox Al Aon Excellent condition - As new

Condition: used, Year of construction: 2001, operating hours: 17,511 h, functionality: fully functional, machine/vehicle number: 1-5341/641134, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,400 mm, total width: 1,690 mm, total length: 1,900 mm, table width: 600 mm, quill stroke: 400 mm, quill diameter: 100 mm, quill travel distance: 400 mm, type of input current: three-phase, distance table to quill: 400 mm, table length: 800 mm, table height: 340 mm, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 320 mm, input voltage: 380 V, overall weight: 2,500 kg, table load: 500 kg, input frequency: 50 Hz, working range: 500 mm, tank capacity: 500 l, input current: 5 A, stroke length: 400 mm, Equipment: documentation/manual, Charmilles Roboform 35P Wire EDM Machine – Year of Manufacture 2001 For sale is a Charmilles Roboform 35P wire EDM machine, manufactured in 2001. The machine is in used condition, commensurate with its age, and is ideally suited for use in tool and mold making, as well as for general EDM applications. Machine Data - Manufacturer: Charmilles - Type: Roboform 35P - Year of Manufacture: 2001 - Machine Type: Wire EDM - Condition: Used - Operation: CNC control with handheld operating device Bsdsz Hb Dfspfx Al Ajln - Work table: 500 x 400 mm - Dimensions (H x L x W): 2400 x 1900 x 1690 mm - Tool changer - Extinguishing system TECHNICAL DETAILS Travel (X, Y, Z): 350, 250, 300 mm Max. manual feed rate: 900 mm/min Electrode weight: max. 20 kg Workpiece weight: max. 40 kg Magazine configuration: 54/8 Electrodes: 54 pieces Electrode dimensions: 70 x 70 x 200 Workpiece dimensions: (4x) 320 x 320 x 270 mm, (4x) 320 x 320 x 170 mm The machine can be seen in its entirety in the photos. Please refer to the pictures for the optical condition and equipment.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Manufacturer – Giemme Thermo Packaging Machinery S.r.l. Bljdjyzxgfepfx Al Aon Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: good (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 13.645, pressing force: 38 t, total width: 2,500 mm, total length: 6,200 mm, total height: 2,500 mm, overall weight: 14,700 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 4,700 kg, input current: 32 A, year of last overhaul: 2023, Avermann MPC16PE compaction container – fully overhauled in 2023 – double hook connection – drop gate For sale: Avermann MPC16PE compaction container with a capacity of 16 m³. This machine was fully overhauled by us in 2023. During the overhaul, the compaction container was completely inspected technically and subsequently blasted and repainted in RAL 7016 anthracite gray. As a result, the machine is in very good condition both technically and visually. The compaction container has a double hook connection, allowing it to be lifted from both sides. In addition, the machine is equipped with a drop gate, making this model particularly suitable for processing wet waste and other moist waste streams. Due to its robust construction, a load capacity of 10,000 kg, and its practical design, this compaction container is very suitable for, among others, industry, manufacturing companies, the food industry, hospitality, waste processing, and recycling. Blsdpfxoz Ephcs Al Aon Technical specifications: Brand: Avermann Type: MPC16PE Machine number: 13,645 Overhaul year: 2023 Capacity: 16 m³ Power supply: 400 V Power: 5.5 kW Fuse: 25 A slow-blow Own weight: approx. 4,700 kg Maximum load weight: 10,000 kg Color: RAL 7016 anthracite gray Double hook connection Equipped with a drop gate Suitable for hooklift transport Very suitable for wet waste / moist waste streams Details: The machine was completely overhauled, blasted, and repainted in 2023. During this process, the compaction container was technically inspected and reassembled in excellent condition. A very neat and well-executed compaction container for companies looking for a professional, overhauled machine without the investment of a new compaction container. Inspection and testing are possible by appointment. Please feel free to contact us for more information, prices, or technical questions. Keywords: Wortmann, Avermann, MPC16PE, MPC16, compaction container, 16 m³ compaction container, waste compactor, container compactor, wet waste, drop gate, double hook connection, waste compaction, recycling, compactor, overhauled compaction container.

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 16232, overall weight: 19,400 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 4,400 kg, input frequency: 50 Hz, input current: 32 A, operating pressure: 200 bar, oil tank capacity: 60 l, Equipment: documentation/manual, Avermann MPC 16 P/E – 16 m³ | Discharge hatch | Fully rubber-lined For sale: Avermann MPC 16 P/E compaction container, built in 2010, with a capacity of 16 m³. This robustly built Avermann compaction container is specifically designed for applications involving the processing of moist or wet waste streams. The machine is equipped with a discharge hatch and is fully rubber-lined on both the front and rear sides. This makes this compaction container particularly suitable for situations where good sealing is important and where, for example, wet waste, industrial waste, or other moist waste streams are processed. The container is equipped with a hook lift system on the front, making it suitable for transport with a hook arm system. Technical data: Brand: Avermann Type: AVOS MPC 16 P/E Year of construction: 2010 Serial number: 16232 Capacity: 16 m³ Power supply: 400 V / 50 Hz Power: 5.5 kW Fuse rating: 25 A Protection class: IP54 Maximum working pressure: 200 bar Own weight: approx. 4,400 kg Permissible total weight: 15,000 kg Hook lift system on the front Equipped with a discharge hatch Front and rear sides fully rubber-lined Robust industrial construction Special features: Due to the combination of the discharge hatch and the rubber lining, this machine is very suitable for processing wet and moist waste streams. The large feed opening makes it easy to quickly feed larger quantities of waste. The compaction container is in used condition and has signs of wear consistent with its age and use. Technically, it is a heavy-duty and robustly built Avermann compaction container for professional use. Blodpez Eqzqjfx Al Asn Suitable for, among others, industry, food companies, manufacturing companies, catering, recycling and waste processing. Inspection and testing are possible by appointment. Please feel free to contact us for more information, price or technical questions. Keywords: Avermann, AVOS, MPC16, MPC 16 P/E, compaction container, 16m3, waste compactor, container compactor, wet waste, discharge hatch, rubber sealing, rubber-lined, hook lift, waste compaction, recycling, compactor.

Condition: good (used), Year of construction: 2013, Hema BRSSF 500 P sourdough machine with control panel and dosing electronics. Year of manufacture: 2013 Power: 4 kW Capacity: up to 500 kg Bljdpfez Hxk Aox Al Aen Dimensions: 110 x 130 cm, height 135 cm

Condition: used, Reportedly unused SGL Carbon type ECH-EC3-07B-1P/P carbon block heat exchanger. Approximate heat transfer area of 10.2sqmt. Space 1 rated 2 bar maximum allowable pressure at 170 deg.c. Space 2 rated 5 bar maximum allowable pressure at 130 deg.c. Bodpfx Alezfifwj Ajln

Condition: good (used), Year of construction: 2014, Dustomat P-20 Mobile Dust Extractor with Flexible Extraction Arm The ESTA DUSTOMAT P-20 mobile dust extractor is a unit specifically designed for professional dust extraction, meeting the highest air purity standards in industrial and commercial settings. With its robust construction, compact design, and ease of use, this model offers a reliable and efficient solution for removing both fine dust and coarse particles. Compared to similar dust extraction systems, the unit stands out due to its high air volume flow, generously sized dust collection bin, and the long service life of its filter elements. Areas of Application: Single- and multi-station extraction in industry and skilled trades Free-flowing dusts Dry chips/shavings Particularly suitable for wood dust Welding fumes and metal dust Metal chips and grinding dust Key Features: Automatic jet-pulse filter cleaning Integrated pre-separator (baffle plate) Cleanable permanent filter cartridges (Dust Class M) Test certificates: H3 (HO 113002); GS (HO 113001) Testing standard: GS-HO-07 (01/2010) Residual dust content H3 < 0.1 mg/m³ Your benefits at a glance Compact and powerful Low operating costs Easy dust disposal Can be used as a mobile single-workstation extractor or a central extraction system Suitable for almost all types of dust, especially wood dust* Optional certification mark available for special applications Blodpfx Aloz E D D Es Asn Technical data: Manufacturer: Esta Type: P-20 Supply voltage: 400 V, 50 Hz Drive power: 3.0 kW Rated current: 6.4/16 A Nominal air flow: 1,832 – 2,600 m³/h Negative pressure: 2,300 – 3,400 Pa Compressed air (max.): 4 – 6 bar Filter area: 20 m² Number of filter elements: 2 Filter cleaning: Jet-Pulse Intake nozzle: 180 mm Dust container: approx. 200 liters Dimensions (L x W x H): 1,650 x 830 x 1,980 mm Weight: 370 kg Year of manufacture: 2014 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 16,418 h, load capacity: 7,000 kg, lifting height: 5,500 mm, free lift: 700 mm, fuel type: diesel, mast type: telescopic, construction height: 3,900 mm, fork carriage width: 1,600 mm, fork length: 1,400 mm, empty load weight: 11,800 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,250 mm, Side loader Load center: 700 ISO class: FEM 4 B Mast type: Telescopic Transmission: Automatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 32x12.1-15 (30%) Rear tire size: 2 x 32x12.1-15 (30%) Battery year of manufacture: 2005 Bledpfez Ifpbox Al Asn Additional single hydraulic circuit, cabin with heater, dust protection, pivoting fork carriage (hydraulic), table height: 900mm, table width: 1400mm, lighting according to StVZO (German Road Traffic Licensing Regulations), 1 work light at the front.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 850079, Year of construction: 2006, operating hours: 11,220 h, load capacity: 3,000 kg, lifting height: 4,500 mm, free lift: 1,410 mm, fuel type: diesel, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! Bedpfxsz D Uxds Al Ajln TECHNICAL DETAILS Lifting capacity: 3,000 kg Lifting height: 4,500 mm Free lift: 1,410 mm Fork length: 1,220 mm Minimum fork width: 240 mm Maximum fork width: 1,240 mm Number of wheels: 4 MACHINE DETAILS Mast type: Triplex Fuel type: Diesel Engine manufacturer: Isuzu Operating hours: 11,220 h Dimensions & Weight Dimensions (L x W x H): 2,700 x 1,260 x 2,120 mm Unladen weight: 4,710 kg EQUIPMENT Side shift Free lift Work lights CE marking Documentation

Condition: used, Year of construction: 2012, CNC gantry plasma cutting machine Bledpfx Aoz H I Auol Asn Manufacturer: Microstep Type: SPL-P 13501.30 Year of manufacture: 2012 Working area: 3,000 x 13,500 mm 1 plasma torch with Kjellberg HiFocus 161i power source Automatic gas console 21026ä

Year of construction: 2019, condition: used, functionality: fully functional, For Sale: M&P Radish Top & Tail Machine – High-Efficiency Vegetable Processing Manufacturer: M&P Engineering Model: Radish Top and Tail Machine Condition: Excellent / Fully Operational Location: Fincham, Norfolk Availability: Immediate Description: Boost your vegetable processing efficiency with this M&P Radish Top and Tail Machine – a high-performance solution designed for the precise and rapid trimming of radishes. Built to the highest standards by M&P Engineering, this machine is ideal for commercial vegetable processors looking to streamline operations and maintain consistent product quality. Key Features: Bsdpowtf Awsfx Al Aoln Accurate Top & Tail Cutting – Clean, consistent cuts reduce waste and improve product appearance. High Throughput Capacity – Designed for continuous operation and optimal productivity. Hygienic Stainless Steel Construction – Easy to clean and built for food-grade environments. Adjustable Settings – Accommodates different radish sizes for maximum flexibility. Plug & Play Setup – Minimal installation time; ready for immediate use. Ideal for: Food processing plants, fresh produce packhouses, and ready-to-eat salad manufacturers.

Condition: used, Year of construction: 2008, Manufacturer: COMEC Model: FUST-P-40 Year: 2008 Type: Semi-automatic filling line Containers: Drums, cans, off-centre-neck containers Max. container height: 500 mm Theoretical output: 200 x 20-litre containers per hour Dosing method: Weight-based, using a load cell Weighing range: 0.5 to 30 kg Accuracy: 10 g Calibration: Automatic Filling speeds: 2 (high flow rate / low flow rate within the same cycle) Filling spout: With anti-drip valve Conveying: Roller conveyor Capping: Manual placement, tightened using a hand-held pneumatic screwdriver Control: Control panel Bodpsz Ic Nfefx Al Ajln FAP-200/1 type feed unit - Filter (cylindrical coil): 500 microns - Pneumatic diaphragm pump - Flow rate: 2 to 4 m³/h - Transport trolley Documentation: Available Video: On request

Condition: used, Year of construction: 2014, functionality: fully functional, Travel ranges Travel distance X-axis [mm] 760 Travel distance Y-axis [mm] 530 Travel distance Z-axis [mm] 560 Distance from spindle bottom edge to table [mm] 150-710 Work table Table length [mm] 900 Table width [mm] 500 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 500 Feed Rapid traverse X- and Y-axis [m/min] 40 Rapid traverse Z-axis [m/min] 36 Max. axis acceleration X-axis [m/sec²] 6 Max. axis acceleration Y-axis [m/sec²] 5 Max. axis acceleration Z-axis [m/sec²] 5 Max. feed force X-axis [kN] 6.951 Max. feed force Y-axis [kN] 6.951 Max. feed force Z-axis [kN] 11.31 Diameter of ball screw X- and Y-axis [mm] 45 Diameter of ball screw Z-axis [mm] 45 Blodpsz Dttgjfx Al Aen Main spindle Main spindle speed min. [1/min] 30 Main spindle speed max. [1/min] 12,000 Main spindle power [S6-40% duty cycle kW] [kW] 25 Main spindle torque max. [Nm] 159 Tool holder SK 40 DIN 69871 A Tool magazine Number of tool magazine positions 30 Tool change time chip-to-chip [sec] 4 Max. tool diameter [mm] 76 Max. tool diameter with adjacent space available [mm] 125 Max. tool length [mm] 280 Max. tool weight [kg] 7 Coolant system Coolant tank volume [l] 300 Through-spindle cooling pressure [bar] 3.5 Through-spindle cooling [l/min] 60 Internal coolant supply pressure [bar] 20 Internal coolant supply [l/min] 25 Chip flushing pressure [bar] 3.5 Chip flushing [l/min] 60 Coolant spray gun yes External compressed air supply yes Separate oil cooler for main spindle yes Oil cooling circuit [l] 100 Separate air supply for main motor yes Basic machine data Installation area width [mm] 2,540 Installation area depth [mm] 2,600 Machine height [mm] 2,930 Weight of basic machine [kg] 6,400 Electrical connection power [kVA] 25 Required pneumatic connection [bar] 6 Required compressed air [l/min] 300 Control system Manufacturer Heidenhain Control system type iTNC 530 HSCI with SmarT.NC Chip disposal Internal screw conveyor 2 Scraper belt conveyor to the outside 1

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Bedpfxsz Ehvxs Al Asln

Condition: used, machine/vehicle number: 1811, 18er Valve Monobloc volumetric piston filler with 6 head capper filling valves: 18 capacity / hour ca.: 9000 Bljdpfxjz Ibzao Al Aen capping heads: 6 working direction: right-left (CCW)

Condition: good (used), Full Onion Peeling Line, Comprising of- Bedezzpu Dopfx Al Aeln -Onion Peeler, manufactured by M&P Engineering MP 16584, The Large Onion Peeling Machine from M&P Engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance -Dolav Tipper -Elevated Conveyor -Roller Table -Onion Washer

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES Bodpfjzvhlkjx Al Ajln · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: used, functionality: fully functional, machine/vehicle number: G1X337N00257, Year of construction: 2003, operating hours: 7,557 h, load capacity: 3,500 kg, lifting height: 6,400 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric 4-wheel forklift Chassis number: G1X337N00257 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Blodpfx Aez H Dngsl Aon Description: Linde E 35 P, No.: R036, Year of manufacture: 2003, Operating hours: 7,557 h, Load capacity: 3,500 kg, Lifting height: 6,400 mm, Mast: Trilex, Battery: 80 V, Equipment: Side shifter, Fork positioner, 3rd and 4th valve. Charger available upon request. Fast and uncomplicated transport possible after consultation! This advertisement serves only to identify the device! A detailed description of the condition and possible equipment will be provided individually upon request! Errors and prior sale excepted. Sale only to commercial businesses. Every sale of used goods is made with the exclusion of warranty and/or guarantee. If you have not found the right device, please contact us. We have a large selection of other devices in stock. Side shifter, fork positioner, 3rd valve, 4th valve.

Condition: used, Year of construction: 2001, pressing force: 60 t, 60-ton eccentric press with lower die clamp Additional safety fuse Non-material barrier to be checked. Blsdpfjz Hlf Tox Al Aon

Condition: good (used), Year of construction: 2002, functionality: fully functional, filter area: 48 m², filter pressure: 15 bar, pressure: 380 bar, cake thickness: 25 mm, total width: 1,500 mm, total length: 4,800 mm, total height: 1,980 mm, overall weight: 4,600 kg, number of chambers: 44, Equipment: documentation/manual, safety light barrier, For sale is a chamber filter press with the following accessories: Hydraulics, filter plates, safety devices, control system, swing plates, feed pump, press frame (steel platform), 3 cake containers for forklifts. Chamber filter press 800 Bledpfx Aezulf Sol Ajn Side-frame press 15 bar filtration pressure Approx. 540 liters Open filtrate discharge 800x800 PP 25mm chamber depth 44 chambers Approx. 2.5 meters useful length Length 4800 x Width 1500 x Height 1980 mm 4600 kg Price upon request. We would be happy to provide you with an individual offer.

Condition: refurbished (used), Year of construction: 2025, rotary table diameter: 320 mm, JUNG H(FR)30 Bodebwmamopfx Al Aeln mechanicaly, geometricaly und elektricaly rebuilt according JUNG acceptance protocoll for new machines 12 month warranty

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P5-0174, working width: 530 mm, type of input current: AC, input voltage: 400 V, overall weight: 175 kg, space requirement height: 1,097 mm, space requirement length: 1,100 mm, space requirement width: 710 mm, input current: 15 A, table width: 1,070 mm, input frequency: 50 Hz, empty load weight: 105 kg, Equipment: safety light barrier, Double Loop closing machine for books and calendars. Adjustable sizes for all diameter rings up to 25 mm Footswitch controlled. Bljdorzulujpfx Al Aen Light beam safety guard. Power requirements: 380-415 v 50/60 Hz

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: C9000052, Year of construction: 2019, operating hours: 1,483 h, lifting height: 13,800 mm, fuel type: diesel, fork length: 1,200 mm, Equipment: UVV, documentation/manual, The current UVV inspection report is attached! The UVV certification is valid until 10/2027! Maintenance and servicing have always been carried out according to the manufacturer's intervals. TECHNICAL DETAILS Load capacity: 3.8 t Lifting height: 13,800 mm Fork length: 1,200 mm Bodszzxv Depfx Al Aoln MACHINE DETAILS Drive: Diesel Tire condition Condition of front right tire: Approx. 80% Condition of front left tire: Approx. 80% Condition of rear right tire: Approx. 80% Condition of rear left tire: Approx. 80% Operating hours: 1,483 h EQUIPMENT UVV inspection valid until 10/2027 Fork carriage Seat cover Spare key Documents Side shift Supports Leveling system