Used Ravaglioli Kpn 305 for sale (806)

Condition: good (used), Tandem cargo bike, load rollers, heavy-duty rollers, heavy-duty wheel, tires, solid rubber tires -Heavy-duty wheel: Double solid rubber tire -Tire type: 415/75-305 -Receipt: Ø 90 x 58 mm Cgedpfxelyvcxj Aa Nep -Bolt circle: Ø 220 mm -Dimensions: Ø 415 x 215 mm Quantity: 1 piece available -Weight: 49 kg

Condition: good (used), Year of construction: 2011, operating hours: 30,000 h, functionality: fully functional, Complete photographic documentation available upon serious inquiry. Manufacturer: Schütte Schleiftechnik GmbH Model / Type: 305 Machine designation: WU 305 Machine type: Tool grinding machine Year of manufacture: 2011 Origin: Made in Germany Condition according to seller: operational Note: Two positions for tool change must be readjusted, instructions available Scope of delivery: - Schütte 305 grinding machine - Filtration system Additional options available: - Tailstock - Auxiliary slide - Support Electrical / pneumatic data: - Electrical connection: 400 V, 3~, 50 Hz, 30 A - Pneumatic connection: 6 bar, 200 l/min - Machine plan no.: MP-305-18-02 - Documentation: R869 - Connected load: 25 kVA Weights / containers / dimensions: - Total weight (per nameplate): 3450 kg - Weight as per machine specifications: 2800 kg (without additional equipment, without coolant system) - Max. capacity of integrated machine sump: 500 liters - Max. coolant fill volume in integrated tank: 350 liters - Width: 1840 mm - Depth without control panel: 1718 mm - Height: 1986 mm Controls: - Control: SINUMERIK 840D - Operator interface: PC with SCHÜTTE software “Computer Aided Grinding” Working area: - Max. workpiece diameter: 235 mm - Max. workpiece length: 570 mm - Center height above floor: 1100 mm Linear axes: - X-axis (longitudinal travel) without tailstock: 400 mm - X-axis (longitudinal travel) with tailstock: 400 mm Codpfsyq Rufsx Aa Nsgp - Y-axis (cross travel): 250 mm - Z-axis (vertical travel): 250 mm - Resolution X, Y, Z axes: 0.0001 mm - Feed speed X, Y, Z axes: 0.1 to 24,000 mm/min Rotary axes: A-axis (workpiece rotation): - Drive: AC direct drive, closed-loop, zero backlash - Mount taper: DIN 2080 - Travel range: unlimited - Resolution:

Condition: excellent (used), Year of construction: 2000, operating hours: 32,767 h, functionality: fully functional, machine/vehicle number: 04-07, total height: 2,320 mm, total length: 2,405 mm, total width: 2,460 mm, workpiece weight (max.): 1 kg, spindle speed (max.): 200 rpm, spindle speed (min.): 12,000 rpm, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 250 mm, type of input current: three-phase, overall weight: 2,800 kg, grinding length: 570 mm, rotational speed (min.): 12,000 rpm, center height: 1,100 mm, grinding spindle speed: 12,000 rpm, feed rate X-axis: 24,000 m/min, feed rate Y-axis: 24,000 m/min, feed rate Z-axis: 24,000 m/min, pivoting range: 225 °, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, grinding spindle motor power: 10,000 W, power: 10.3 kW (14.00 HP), workpiece diameter (max.): 235 mm, input current: 30 A, grinding diameter: 235 mm, input frequency: 50 Hz, input voltage: 400 V, space requirement width: 3,800 mm, space requirement length: 4,265 mm, space requirement height: 2,320 mm, year of last overhaul: 2025, workpiece length between centers: 570 mm, Equipment: rotational speed infinitely variable, For Sale: 2000 Schütte 305 Linear 5-Axis CNC Tool & Cutter Grinder | SINUMERIK 840D Control | New Spindle The Schütte 305 Linear CNC Tool and Cutter Grinder is a high-performance, robust 5-axis CNC grinding machine, manufactured by Alfred H. Schütte in 2000. This machine is specifically designed for high-precision grinding operations and is ideally suited for re-sharpening and manufacturing cutting tools, as well as handling complex geometries. Codpfxoyrf Trs Aa Nogp Equipped with a Siemens 840D control system, the machine ensures precise and reliable CNC operations. Generous travel ranges of 400 mm in the X-axis, 400 mm in the Y-axis, and 250 mm in the Z-axis provide ample flexibility for a wide range of tool and cutter grinding applications. The powerful spindle motor delivers 10.44 kW and enables spindle speeds of up to 12,000 rpm, ensuring efficient material removal and high-quality surface finishes. The machine has undergone extensive technical refurbishment: in 2024, all linear guides were fully renewed, and in 2025, the machine received a brand-new spindle, guaranteeing excellent mechanical performance. Additionally, the machine is equipped with Schütte Integrated Grinding Software (SIGS), enabling precise programming and control of complex grinding operations.

Condition: ready for operation (used), The device is used from a catering facility! Cjdpfx Aaeu Trcte Njgp We also sell various other catering equipment.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: PE-305L-1307, 30A 5-axis Siemens Sinumerik control cabinet Cgodpfxjyl Iq Ho Aa Nsp 2008 GEA Multitron Junior air extraction system 2008 Volmat FA-120S filtration system with cooling Motoman MX100 robotic arm with control cabinet 400V The robotic arm is not operational. The machine is in good condition and has always been used without the robot. The robotic arm has never been put into operation and is currently not functioning. All parts and assemblies are separated; the machine has been completely dismantled and is therefore easy to transport.

Condition: excellent (used), Year of construction: 1979, Kapp AST‑305B – Technical Specifications Machine type: automatic hob and gear cutter sharpening machine Year of manufacture: circa 1979 Machine function: resharpening of hobs, spiral or straight gash cutters; wet or dry grinding Maximum tool diameter capacity: 12 inches (300 mm) Maximum tool length between centers: 27 inches (700 mm) Maximum table traverse: 21.56 inches (550 mm) Maximum grinding wheel diameter: 12 inches (300 mm) Maximum center height: 6.1 inches (155 mm) Table speed (infinitely variable): – deep grinding: 30 to 1000 mm/min Cgedpewwkt Aofx Aa Njp – surface grinding: 3 to 16 mm/min Flute lead angle range: 0° to 45° Flute lead range: selectable, up to 24‑inch to zero or 12‑inch to zero Grinding spindle speed: 2200 rpm (optional 1000–4000 rpm) Axial grinding spindle adjustment: 16.54 inches (420 mm) Vertical grinding head adjustment: 11.81 inches (300 mm) Spindle taper: Morse 4 or steep taper 40 Preselectable single in-feed: range 0 to 9999 (units) Machine dimensions: length 118 in × depth 82 in × height 93 in (≈3000 × 2080 × 2360 mm) Machine weight: approximately 7,500 lbs (3,000 kg) Control system: originally manual/analog, often upgraded with Allen‑Bradley PLC

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw Csdeupw R Aepfx Aa Negp • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, spindle speed (max.): 12,000 rpm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 250 mm, type of input current: three-phase, rotational speed (max.): 12,000 rpm, grinding spindle speed: 12,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, grinding spindle motor power: 10,500 W, power: 10.3 kW (14.00 HP), input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, For Sale: 2008 Schütte 305 Linear 5-Axis CNC Tool & Cutter Grinder | Siemens 840D | New Spindle | Medical-Grade Machine Now available at Used Machine Tools Ireland Ltd, this high-precision Schütte 305 Linear 5-Axis CNC Tool and Cutter Grinder (2008) is an exceptional solution for tool regrinding, complex geometry grinding, and high-volume production. Previously in operation at a leading medical device company, this machine has been meticulously maintained, with a brand-new spindle installed in 2024. This grinder is fully equipped with modern tooling support systems including fire suppression, Absolent mist extraction, Ebbco coolant filtration, and in-line chiller, making it production-ready for demanding grinding applications. 🔹 Manufacturer: Alfred H. Schütte 📅 Year of Manufacture: 2008 📍 Location: Ireland ⚙️ Condition: Very Good – Ex-medical device use 🚀 Availability: Immediate 🔧 Spindle: Replaced in 2024 🛠️ Technical Specifications: Machine: Schütte 305 Linear CNC Tool & Cutter Grinder Machine Type: 5 Axis CNC Grinder Model: 305 Linear Year: 2008 Control: Siemens 840D with Windows XP Axes: 5-Axis CNC X-Axis Travel: 400 mm X-Axis with Tailstock: 400 mm Y-Axis Travel: 400 mm Z-Axis Travel: 250 mm Spindle Motor Power: 14 HP Spindle Speed: Up to 12,000 RPM Software: SIGS – Schütte Integrated Grinding Software Condition: Very good – Ex-medical device industry Spindle Replaced: 2024 (new) ⚙️ Equipped With: 🔥 Fire Suppression Unit 🌫️ Absolent Mist Extraction System 💧 Ebbco Coolant Filtration Unit ❄️ Ebbco In-line Chiller 🧠 Advanced SIGS Grinding Software 🛡️ New Spindle (2024) 💡 Ideal Applications: Tool & cutter regrinding Custom tooling production Precision carbide & HSS grinding Medical, aerospace, and high-specification manufacturing Schütte 305 Linear for sale Used 5-axis CNC tool grinder Tool and cutter grinder Siemens 840D Schütte SIGS software grinder CNC tool regrinding machine Ireland Schütte tool grinder with mist extraction Medical-grade grinding equipment Csdpfsw Nyc Aex Aa Nogp High-performance cutter grinder 5-axis

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, spindle speed (max.): 12,000 rpm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 250 mm, type of input current: three-phase, rotational speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, grinding spindle motor power: 10,500 W, power: 10.3 kW (14.00 HP), input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, grinding wheel speed: 12,000 rpm, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, For Sale: 2008 Schütte 305 Linear 5-Axis CNC Tool & Cutter Grinder | Siemens 840D | New Spindle | Medical-Grade Machine Now available at Used Machine Tools Ireland Ltd, this high-precision Schütte 305 Linear 5-Axis CNC Tool and Cutter Grinder (2008) is an exceptional solution for tool regrinding, complex geometry grinding, and high-volume production. Previously in operation at a leading medical device company, this machine has been meticulously maintained, with a brand-new spindle installed in 2024. This grinder is fully equipped with modern tooling support systems including fire suppression, Absolent mist extraction, Ebbco coolant filtration, and in-line chiller, making it production-ready for demanding grinding applications. 🔹 Manufacturer: Alfred H. Schütte 📅 Year of Manufacture: 2008 📍 Location: Ireland ⚙️ Condition: Very Good – Ex-medical device use 🚀 Availability: Immediate 🔧 Spindle: Replaced in 2024 🛠️ Technical Specifications: Machine: Schütte 305 Linear CNC Tool & Cutter Grinder Machine Type: 5 Axis CNC Grinder Model: 305 Linear Year: 2008 Control: Siemens 840D with Windows XP Axes: 5-Axis CNC X-Axis Travel: 400 mm X-Axis with Tailstock: 400 mm Y-Axis Travel: 400 mm Z-Axis Travel: 250 mm Spindle Motor Power: 14 HP Spindle Speed: Up to 12,000 RPM Software: SIGS – Schütte Integrated Grinding Software Condition: Very good – Ex-medical device industry Spindle Replaced: 2024 (new) ⚙️ Equipped With: 🔥 Fire Suppression Unit 🌫️ Absolent Mist Extraction System 💧 Ebbco Coolant Filtration Unit ❄️ Ebbco In-line Chiller 🧠 Advanced SIGS Grinding Software 🛡️ New Spindle (2024) 💡 Ideal Applications: Tool & cutter regrinding Custom tooling production Precision carbide & HSS grinding Cgsdpfow Nyciex Aa Nop Medical, aerospace, and high-specification manufacturing Schütte 305 Linear for sale Used 5-axis CNC tool grinder Tool and cutter grinder Siemens 840D Schütte SIGS software grinder CNC tool regrinding machine Ireland Schütte tool grinder with mist extraction Medical-grade grinding equipment High-performance cutter grinder 5-axis

Condition: reconditioned (used), Water-cooled TIG welding machine with inverter technology, suitable for both direct current (DC) and alternating current (AC) welding applications. It offers features for precise welding results on a wide range of metals, including aluminum. IP23 rated; 300 amps duty cycle at 55%, and 100% at 230 amps. Scope of delivery: gas regulator, hose package. Workshop-tested used machine. Codpjyitdtsfx Aa Njgp

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 630005, center height: 305 mm, center width: 1,000 mm, travel distance X-axis: 350 mm, travel distance Z-axis: 1,160 mm, controller model: KELCO 90, TECHNICAL DETAILS Centre height: 225 mm / 305 mm Centre distance: 1,000 mm Travel Z-axis: 1,160 mm Travel X-axis: 350 mm Max. workpiece weight: 200 kg Workpiece diameter: 449 mm Left grinding wheel diameter: 500 mm Left grinding wheel width: 80 mm Left grinding wheel bore: 203 mm Right grinding wheel diameter: 400 mm Right grinding wheel width: 40 mm Right grinding wheel bore: 127 mm B-axis swiveling range: +30° / -190° Max. grinding wheel speed: 1,720 rpm Peripheral speed: 45 m/s Workpiece spindle speeds from: 5 rpm Workpiece spindle speeds up to: 500 rpm Spindle taper: Morse taper 5 (MT 5) Tailstock quill taper: 4 Morse (MT 4) Tailstock quill stroke: 50 mm Feed rate X-axis: 8 m/min Feed rate Z-axis: 16 m/min Max. table tilt: -1° / +11° MACHINE DETAILS Control: KELCO 90 Total power requirement: 25 kW Connection: 50 Hz, 3x 380 Volt Dimensions & Weight Machine dimensions (L x W x H): 2,850 x 2,200 x 2,100 mm Control cabinet dimensions (L x W x H): 550 x 450 x 900 mm Machine weight: approx. 6,000 kg EQUIPMENT 80 mm riser block Cedpfoyhnrvjx Aa Njgp Coolant system Automatic tool measurement KELSET Wheel dressing device Internal grinding device (without spindle) Set of flanges Set of grinding wheels Balancing arbor Lamp Magnetic chuck diameter (2x): 300 mm / 500 mm Electronic hand-held control panel

Condition: used, Luenette Diameter 150 mm Height without base 420 mm Cedpfxocrcv Us Aa Nsgp Width of the foot 125 mm

Condition: used, Year of construction: 2023, operating hours: 428 h, power: 224 kW (304.55 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tyres (front): 600/70 R30, Tyres (rear): 710/70 R42, Operating hours: 428, First registration: 19.12.2024_____First registration: 19.12.2024, Operating hours: approx. 650 Basic equipment / technical data ENGINE Max. power: 224 kW / 305 hp (ISO 14396) Max. torque: 1280 Nm 6 cylinders, 7.4 l AGCO Power - 74 LFNT-5D, CR, 4V Emission standard: Stage 5 (DOC+SC+SCR) without exhaust gas recirculation Electronic engine management with Vistronic fan control Cgjdsw E N Tdopfx Aa Nsp Engine speed memory Powercore engine air filter with coarse dirt extraction EasyCare cooling package Additional pre-fuel filter with water separator 500-litre fuel tank

Condition: new, functionality: fully functional, empty load weight: 400 kg, maximum load weight: 2,300 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,530 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MP 305 153 2700 2 NEW VEHICLE Internal dimensions: 305cm x 153cm Side panel height incl. railing: 43cm Loading deck height: 54cm Gross vehicle weight: 2700Kg Payload: 2300Kg Braked twin-axle low-loader trailer Overrun and handbrake by KNOTT 2 x 1350Kg braked axles Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side walls Steel railing Rear side wall foldable and removable with tension latch 15mm thick, non-slip and durable phenolic plywood floor Jockey wheel 6 lashing eyes with 400Kg tensile strength each 14" reinforced commercial C tires M+S tires Net/rope hooks on the frame 13-pin connector Front position lights Rear lights with reversing light, fog light, and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Folding and removable front panel - Integrated loading ramps, 2000Kg capacity - SARIS alloy wheels - Complete LED lighting - Anti-theft device - Net, fine or coarse mesh - H-frame - Mesh side extensions in various heights, also closed - Flat cover tarpaulin with or without hoops - High cover tarpaulin 180cm - Rear supports More accessories available on request! Plus delivery to Gera & vehicle documents €150 net Images are for illustration purposes and may show optional equipment subject to surcharge. Haven’t found the right trailer yet? We always have 50-100 vehicles in stock, ready for immediate collection. Our workshop is open weekdays 8:00 – 17:00 for all types of repairs. Axle repair specialist, including for caravans. Cgedpfxerk Ip Ie Aa Nop Large range of rental trailers available. We also have a large selection of spare parts and accessories for all trailer brands. Get advice by phone, visit our website, or come and see us directly.

Condition: new, functionality: fully functional, empty load weight: 365 kg, maximum load weight: 1,635 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,530 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MP 305 153 2000 2 NEW VEHICLE Cgsdpork Iprofx Aa Nep Internal dimensions: 305 cm x 153 cm Sidewall height incl. rail: 43 cm Loading platform height: 51 cm Gross weight: 2,000 kg Payload: 1,635 kg Braked tandem low loader Overrun brake and handbrake by KNOTT 2 x axle with 1,350 kg brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels Steel rail Rear side panel fold-down and removable 15 mm thick, slip-resistant and robust phenolic plywood floor Jockey wheel 6 lashing rings with 400 kg pull force 13" tyres M+S tires Net/rope hooks on the frame 13-pin connector Front marker lights Rear lights with reverse light, fog lamp, and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Folding and removable front panel - Integrated loading ramps 2,000 kg - SARIS lightweight alloy wheels - Full LED lighting - Anti-theft lock - Fine- or coarse-mesh net - H-frame - Mesh extension in various heights, also enclosed - Flat cover with or without bows - High cover 180 cm - Rear supports Further accessories available on request! Plus freight to Gera and vehicle registration document €150 net Images are for illustration purposes and may show optional accessories at extra cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate collection. The workshop is open on weekdays from 8:00 - 17:00 for repairs of all kinds. Specialist in axle repairs, also for caravans. Wide range of rental trailers. We also have a large selection of spare parts and accessories for trailers of all brands. Get advice by phone, visit our website, or come by in person.

Condition: good (used), functionality: fully functional, power: 75 kW (101.97 HP), gearing type: hydrostat, fuel type: diesel, color: green, overall weight: 11,000 kg, lifting power: 5,000 kg/m, lifting height: 7,000 mm, tire condition: 80 %, first registration: 03/2004, mast type: mono, shovel volume: 2.5 m³, Year of construction: 2004, operating hours: 3,700 h, Equipment: additional headlights, adjustable boom, adjustable chassis, all wheel drive, cabin, gripper hydraulics, hammer hydraulics, hydraulics, pallet forks, standard shovel, trailer coupling, Vehicle description: Sennebogen 305 telescopic loader, year 2004, 3,740 operating hours according to the counter, 7 m lift height, 5 t lifting capacity, 75 kW Deutz turbo engine, incl. forks, crane arm, hydraulic quick coupler, auxiliary hydraulic circuit up to fork carrier, cab height-adjustable up to 4 m, cab with heating, lighting system with indicators, joystick control, all-wheel drive, 3 steering modes, immediately ready for use, original paint, good tires. Sale price: €38,000 net. Transport possible. Codpfx Aeynwzasa Njgp

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 3,425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, number of axes: 3, This 4-axis MECAL MC 305 vertical machining center was manufactured in 2008. It features a high-power electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The machine offers a large working range up to 8000 mm and includes a centralized minimal cooling system. If you are looking to get high-quality milling capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for more information. • A (rotation): ±125° • Spindle: • Type: Electric spindle, air-cooled • Tool magazine: • Location: Center of machine base, protected area • Capacity: Various tools (milling cutters, taps, end mills, angle grinders) • Construction: • Electrowelded structure for maximum rigidity • Linear guides with ball screws • Automatic central lubrication of guides and spindles • Cooling: • Centralized minimum quantity lubrication system Cedpjx D Izhsfx Aa Negp • Working range: • Standard workpiece length: up to 4000 mm • Extended (differential cycle): up to 8000 mm

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 3,425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2004. It features a powerful 5.5 kW electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The tool magazine is centrally located, protected, and supports various tools. It has a standard workpiece length up to 4000 mm and an extended range up to 8000 mm. Contact us for more information about this machine. • A (rotation): ±125° • Spindle Type: Electric, air-cooled • Tool magazine: • Located in the middle of the machine base in a protected area • Accommodates various tools: milling cutters, taps, end mills, angle heads • Construction: • Welded steel structure for maximum rigidity • Linear guides with ball screws • Automatic central lubrication of guides and screws • Cooling: Centralized minimum lubrication system (MQL) • Working range: • Standard workpiece length: up to 4000 mm • Extended range (differential cycle): up to 8000 mm Cjdpfxex D I Hkj Aa Nsgp

Condition: new, cutting diameter 280 mm saw band length 3370 mm cutting width 350 mm dimensions of saw-band 3370 x 27 x 0,9 mm 280 mm 250 mm 350 x 200 mm 240 mm Codpfxoivuqtj Aa Njgp 220 mm 230 x 220 mm 170 mm 150 mm 170 x 100 mm saw tape speed 37 + 74 m/min total power requirement 1,8 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,5 x 1,7 x 2,0 m

Condition: new, cutting diameter 305 mm saw band length 3375 mm cutting width 350 mm Cgedpfou Dbvtsx Aa Nep dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Year of construction: 2007, condition: ready for operation (used), A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible. Cgjdpjyiflgsfx Aa Nop

Year of construction: 1993, condition: ready for operation (used), A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible. Cgjdpsvb Hbfefx Aa Nep

Condition: new, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 90 degrees: square 260 mm capacity 45 degrees: flat 230 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 230 mm capacity 60 degrees: flat 170 x 100 mm capacity 60 degrees: square 155 mm capacity 60 degrees: round 175 mm turning speed range: 18 – 110 m/min dimensions of saw-band 3.375 x 27 x 0,90 mm work height max. 880 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration Cedpfx Ajxabacoa Negp - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA be executed.

Condition: good (used), PLC controller, expansion module, interface module -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 305-7LA11 -Number: 1 module available -Dimensions: 50/135/H300 mm Csdpfocar Agox Aa Njgp -Weight: 1.1 kg

Condition: excellent (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 32 mm -Transport width: 305 mm -Socket: M10 single-sided, ball bearing -Number: 24x transport casters available -Price: per piece Cedpfjxyglwjx Aa Njgp -Dimensions: 330/32/H37 mm -Weight: 0.7 kg/pc.