Used Rebar Bender for sale (752)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1980, machine/vehicle number: 802315, shaft diameter: 105 mm, roller (bottom) diameter: 275 mm, roller (top) diameter: 275 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of rollers: 3 Number of driven rollers: 2 Shaft diameter: 105 mm Top roller diameter: 275 mm Bottom roller diameter: 275 mm Power: 5.5 kW Gsdpfj Aidwtsx Aanjkd Resistance torque: 30 cm³ Capacity, round material diameter: 60 mm MACHINE DETAILS Control: Conventional Drive type: Hydraulic Design: Horizontal and vertical Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,400 x 1,400 mm Unladen weight: 2,500 kg Transport packages: 1

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new circular bending machine with only 29 operating hours! TECHNICAL DETAILS Working area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheets: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L × W × H): 1,850 × 700 × 1,200 mm Weight: 520 kg EQUIPMENT 3-roller circular bending machine with asymmetrical roller arrangement Sturdy machine frame made of spheroidal cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric closure for easy workpiece removal Wire feed grooves on the lower and rear rollers Gkodpfxe Aiuyxe Aanod Conical bending device Manual adjustment of the rear roller Separate mobile control panel with foot switch for left/right operation Emergency stop safety cord Side cover Operating manual

Year of construction: 1991, condition: reconditioned (used), Mubea / Muhr and Bender BB 032 P200: - rebar bending machine with electr. steering - Saving of bending programs with up to 10 different angle sizes - Memory for up to 200 bending programs Gsdpoium Euefx Aanokd Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: new, Year of construction: 2026, rebar bending machine evo 36 400 Volt 50 Hz 3 ph. capacity up to 36 mm at R=65kg/mm2 weight 320 kg with 6 round tooling 50-60-70-80-95-120 mm 1 pc. square bolt Gkjdpfx Aohiyadeanod foot pedal CE declaration

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Gedpfx Asw Dgi Teanekd Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: used, Year of construction: 2016, functionality: fully functional, A flexible induction bending machine (Liming Electrical & Machinery Factory) for bending and curving tubes (pipes), box sections, wide flange beams, and channels. This 30” capacity induction bending machine was installed in 2017 at our works in Oldbury in the UK. THE MACHINE CAPACITY: Tube / Pipes From Ø165 up to Ø762 6" up to 30" (USA) Beams (easy way & hard way) IPE 600 & HEB 600 Gedpjupia Njfx Aanjkd W27 x 178 (USA) Box Sections 100 x 100 up to 500 x 500 4" x 4" up to 20" x 20" (USA) Channels UPN 50 up to UPN 400 C6 x 8.2 up to C15 x 50 (USA)

Condition: new, Year of construction: 2026, Rebar Bender IB 36 - solid construction - turning table Gkjdpfx Aaedibzvonsd - manual and automatic mode - Pre selection of bending angle 3 piece - 2 sideholders - with foot pedal for left and right bending Technical Details: bending capacity 500 N/mm² 28 mm Dimensions 800x900x800 mm weight 350 kg motor 3,0 KW bei 400 V 50 Hz 3 phase

Condition: used, mileage: 1,001 km, first registration: 01/1999, color: orange, driver cabin: other, gearing type: other, loading space volume: 16 m³, loading space length: 5,600 mm, loading space width: 2,300 mm, loading space height: 1,250 mm, Year of construction: 1999, Vehicle location: Bovenden, steel superstructure, flap Body: Bender tipper body approx. 16m³, hydr. flap opening, roof protection, Hardox body Frame width rear 770mm Body is dismantled from Daimler Benz SK 3544 8x8 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gedpsvhig Refx Aanskd - .

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: foot remote control, For sale is a Mubea / Muhr und Bender BFL 350, a robust combined profile and bar steel shear with punching and notching capabilities. This machine is ideally suited for processing profiles and bar steel, as well as for punching and notching operations. Thanks to its combined design, various processing steps can be carried out with a single machine. Technical data: Manufacturer: Mubea / Muhr und Bender Gsdpfx Aaez Ahansnskd Type: BFL 350 Design: combined profile/bar steel shear with punching and notching capabilities Punching force: 35 t Punching: up to Ø 28 mm with a sheet thickness of 10 mm Punching: up to Ø 23 mm with a sheet thickness of 12 mm Cutting capacities: Round steel: up to Ø 30 mm Flat steel: up to 28 mm Angle steel: up to 90 x 90 x 8 mm Flat steel: up to 150 x 13 mm Flat steel: up to 80 x 16 mm The Mubea / Muhr und Bender BFL 350 impresses with its versatile applications and its solid construction, designed for industrial use. Inspection is possible by prior arrangement. If you have any questions about the machine or would like further information, please do not hesitate to contact us.

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: HIW1000/610-201, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, electrical contact length stop, emergency stop, foot remote control, quick-change device, For sale is an extremely powerful and versatile hydraulic universal punching and shearing system from the German premium manufacturer Mubea (Muhr und Bender), model HIW 1000/610. This double-cylinder machine allows independent operation at the stations and offers a tremendous punching force of 100 tons (1000 kN) with an extra-deep throat depth of 610 mm. The system is CE-certified, manufactured in 1997, and is ideally designed for heavy-duty applications in steel construction, metalworking, and industrial manufacturing. Technical data: • Manufacturer: Mubea (Muhr und Bender) • Model / Type: HIW 1000/610 • Machine No.: HIW1000/610-201 • Year of manufacture: 1997 • Connection voltage: 400 V / 50 Hz (3 phases) • Control voltage: 24 V • Punching force: max. 1000 kN (100 tons) • Throat depth: 610 mm • Machine weight: 3,150 kg • CE marking: Present Performance data & capacities (for material with 450 N/mm² tensile strength) Gkods Adzciepfx Aansd • Flat steel shear: • max. 600 x 15 mm • max. 400 x 20 mm • Profile steel shear (C and I profiles / flanges): • S = 13 mm • B = 60 mm • T = 90 mm • Notching: • 90°: max. 160 x 16 mm • 45°: max. 70 x 7 mm • Bar shear: • Square bar (☐): max. 50 mm • Round bar (◯): max. 50 mm • Hole punch: • max. Ø 40 mm in 22 mm material thickness Includes a large amount of accessories and an electrical contact length stop.

Year of construction: 2025, condition: refurbished (used), Complete automatic Stirrup bender PRIMA 12, manufactured by SCHNELL (Italy) Full revamped “as new”, Up to 12 mm SCOPE OF SUPPLY Two pay-offs for wire coils. - Composed by basement & coil support. - Coils weight max. 3.800 Kg coils. - With automatic pneumatic brake controlled from the computer of the line. Rebar straightening & cutting machine Schnell PRIMA 12 - Straightening devices with mechanical setups and separate adjustment for each strand. - Serial interface to Minicontrol type computer. TECHNICAL SPECIFICATIONS Revamping year: 2025 Original manufacturing year: 2005 Wire diameter: Godevtp Rmepfx Aanskd - Single strand up to: 4 – 12 mm - Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Working pressure: 7 bar Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Dimensions: 3530 x 1330 x 2180 mm Weight (approx.): 2300 Kg Original manufacturing year: 2005 Revamping year: 2025 Wire diameter Single strand up to: 4 – 12 mm Wire diameter Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Working pressure: 7 bar Weight (approx.): 2300 Kg Dimensions (approx.): 3530x1330x2180 mm

Condition: excellent (used), For sale: a Karl Tränklein Case Bender, a machine designed for shaping and bending the spines of hardback book covers. The device gives the covers the appropriate curvature, ensuring a perfect fit to the book block. The machine is equipped with adjustable rollers, allowing for adaptation to different cover thicknesses. The robust cast iron construction ensures high precision and long-lasting durability. Technical data: Manufacturer: Karl Tränklein Type: Case Bender / spine forming machine Working width: approx. 600 mm Adjustable roller pressure Stable cast iron construction Electric drive Work table Condition: used Applications: Production of hardback books, Bookbinding, Printing companies, Graphic arts companies, Gsdpfxoz Sm Umo Aanekd Production of albums, catalogs, and covers.

Condition: used, Profile steel cutting machine Manufacturer: Mubea Muhr + Bender Type: MIW 400 Year of manufacture: unknown Pressing/punching force: 40 tons (400 kN) Punching capacity: Hole diameter up to max. Ø 30 mm in 10 mm thick steel (or Ø 20 mm in 15 mm steel) Punching stroke: 175 mm (working height: 1055 mm) Flat bar shear: Cuts flat material up to 150 x 10 mm as standard Gkedj Ahwg Sopfx Aanod Profile and bar steel cuts: Round steel up to Ø 30 mm and square steel up to 28 mm Weight: approx. 800 kg 121126ä

Condition: used, functionality: unexamined, total width: 120 mm, total length: 120 mm, total height: 120 mm, overall weight: 1 kg, Bender ISOMETER iso685-D-B Insulation Monitoring Device – B91067020 Insulation monitoring device for continuous monitoring of the insulation resistance in unearthed AC, DC, and AC/DC power supply systems. Manufacturer: Bender Product Series: ISOMETER Type: iso685-D-B Article Number: B91067020 Device Type: Insulation Monitoring Device Monitored Network System: IT systems (unearthed networks) Network Rated Voltage AC: 0–690 V Network Rated Voltage DC: 0–1000 V Network Rated Frequency: 1–460 Hz Supply Voltage AC: 24–240 V Supply Frequency: 50–400 Hz Supply Voltage DC: 24–240 V Measured Values: Insulation resistance, network voltage, network leakage capacitance, and frequency Measurement Method: Active AMPPlus measurement method Measurement Profiles: Predefined measurement profiles for different network conditions Display: Integrated high-resolution graphical LC display Operation: Integrated control elements Communication Interfaces: Ethernet and RS-485 Communication Protocols: Modbus TCP, Modbus RTU, BCOM, Bender Sensor Bus Web Server: Integrated History Memory: Available ISOnet Function: Available, for monitoring coupled IT systems Alarm: When set insulation limit values are undercut Remote Monitoring: Possible via network interface Gedpfxj Aia Dns Aanekd Extension of Voltage Range: Possible via external coupling devices Standard for Insulation Monitoring: IEC 61557-8 Application Areas: Industrial power supplies, converter systems, UPS systems, battery networks, and coupled IT systems.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2004, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, product height (max.): 15 mm, Mubea / Muhr and Bender KLH 500 / 610: - hydraulic hole punch Gkjdovdiduepfx Aanod - Punching force 50 to - stroke 60 mm - punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 in 4.5 mm - throat depth 610 mm - with support table Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: used, Year of construction: 1970, rechts Ausklink / links S Gsdpoztf Ahefx Aanjkd fence elektronisch ja /nein foot pedal mechanisch weight of the machine ca. 1,3 t

Condition: reconditioned (used), Year of construction: 1996, Mubea / Muhr and Bender BS110: - mech. reinforcing steel shears - low-maintenance central oil lubrication - elect. Lifting magnet engagement via foot pedal - cuts reinforcing steel up to Ø 50 mm - workshop overhauled Special tools and devices on request. Gkodpfx Asqfgy Hoaned Trade-in of used machines. Europe-wide delivery possible.

Condition: excellent (used), Year of construction: 2011, control type: NC control, number of rollers: 3, roller (bottom) diameter: 130 mm, roller (top) diameter: 130 mm, side roll diameter: 130 mm, sheet thickness (max.): 4 mm, overall weight: 1,470 kg, total length: 1,500 mm, total width: 1,000 mm, total height: 1,200 mm, Equipment: documentation/manual, emergency stop, foot remote control, 3 roll plate bender Stuckmann & Hillen - 311.04 Rolling width: 1270mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:5mm Rolling thickness prebending: 3mm Top Roll Ø: 130mm Bottom Roll Ø: 130mm Side roll Ø: 130mm Number of rolls: 3 Gkedpfxo Aidw Ej Aaned Rolling speed: 10,5 Adjustiment lower roll: 60mm/min. Adjustment side rolls: 20mm/min. Power: 3kW Length: 1500mm Width: 1000mm Height: 1200mm Weight: 1470kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 3,358 h, machine/vehicle number: K22268, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: JORNS, working width: 6,410 mm, folding beam adjustment: 200 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, back gauge speed R-axis: 283 mm/s, back gauge travel distance R-axis: 1,250 mm, back gauge travel distance Z-axis: 1,250 mm, overall weight: 13,000 kg, total length: 8,500 mm, total width: 3,354 mm, total height: 1,938 mm, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, We offer this used Jorns JDB-150G-DP-1250-JC100-6.4-dsp panel bending machine for sheet metal, manufactured in 2023. Year of manufacture: 2023 Gkjdoz Dillopfx Aanjd Model: JDB-150G-DP-1250-JC100-6.4-dsp Rated current: 80 A Operating voltage: 3 × 400 V Frequency: 50 Hz Control voltage: 24 VDC Maximum hydraulic pressure: 210 bar Maximum pneumatic pressure: bar If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: used, Steinweg B32 Bar bender serial number 3701, Year 1990, original machine tool manual, and tooling as per photographs. Gkjdpozh Rfwofx Aanjd

Condition: excellent (used), functionality: fully functional, control type: CNC control, actuation type: hydraulic, controller model: Siemens, number of rollers: 3, roller (top) diameter: 205 mm, side roll diameter: 205 mm, sheet thickness (max.): 6 mm, overall weight: 6,800 kg, total length: 5,500 mm, total width: 2,200 mm, total height: 2,200 mm, Equipment: emergency stop, hardened rollers, Hardned and Grounded rolls Fully Hydraulic machine Hydraulic drop end Central lubrication NEW Opperator panel with SIEMENS Display NEW JOYSTICK Rotation and Positioning rolls CE-Safety line Rolling width: 4500mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending: 3mm Top Roll Ø: 205mm Side roll Ø: 205mm Rolling speed: 0 - 5 Adjustiment lower roll: 0 - 100mm/min. Gkodpfx Aaj Ah Rzusnsd Adjustment side rolls: 0 - 100mm/min. Power: 11kW Length: 5500mm Width: 2200mm Height: 2200mm Weight: 6800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1995, control type: CNC control, actuation type: hydraulic, controller manufacturer: PSG 2000 ULTRA, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 310 mm, side roll diameter: 270 mm, sheet thickness (max.): 16 mm, overall weight: 16,000 kg, total length: 7,000 mm, total width: 2,100 mm, total height: 5,600 mm, Make: FACCIN Type: 4HEL 16/13 Control: PSG 2000 ULTRA YOP: 1995 PSG Ultra Controller for Eclipse and Teachin Cycle operations TOP Support motorized adjustable arm length ..... mm SIDE Support hydraulic swivable  Central lubrication Conical bending device Fully hydraulic machine Rolling width: 4000mm Rolling thickness 3x toproll Ø:16mm Rolling thickness 5x toproll Ø:20mm Rolling thickness prebending: 13mm Top Roll Ø: 310mm Bottom Roll Ø: 280mm Side roll Ø: 270mm Number of rolls: 4 Gjdpfxe Ai Dcaj Aanekd Rolling speed: 0 - 5 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 200mm/min. Control: PSG Faccin Top support: Yes Side supports: Yes Length: 7000mm Width: 2100mm Height: 5600mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Concrete rebar bending machine / Bending machine B 50 – Exhibition model COMPLETE TECHNICAL SPECIFICATIONS – SEE PHOTO Gjdpfxjzvy S Ne Aanokd - CE marking - Incl. bending pins / stop / bending sleeves - Safety guard / end switch activated - Bending capacity max. 50mm / diameter (single bar) - Foot switch - Complete documentation - Bending via program or individual bends Dimensions: L x W x H 1.3 x 0.9 x 1 meter / Weight 600 kg Errors and omissions excepted.

Condition: reconditioned (used), Year of construction: 1982, Mubea / Muhr and Bender BFL 350: - Combined Profile-/bar steel shears with hole punch and notcher - Punching force 35 tons - punches up to Ø 28/23 mm in 10/12 mm sheet thickness - cuts up to Ø 30 mm / ■ 28 mm /∟ 90 mm x 8 mm / 150 mm x 13 mm / 80 mm x 16 mm Gkedpfx Aoium Stsanod Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, Equipment: documentation/manual, Technical data: Useful length: 3240 mm Performance at 400N/mm2: 6.00 mm Stroke of upper beam: 1030 mm Bending beam adjustment: 180 mm Drive power upper beam: 2x 9.45 kW Drive power bending beam: 2x 9.42 kW Godpfexn Dhljx Aanekd Upper beam Upper beam pre-stop from 15 mm Geometry: 180° Hydraulic tool clamping (WZS 5000) Bending beam Up’n Down bending beam, program-controlled Pneumatic clamping WZS 7000 Motorized bending beam adjustment 180 mm Motorized bending center adjustment 100 mm Motorized central crowning