Used Recoiler Mandrel for sale (448)

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Isdpoyurx Tofx Am Djih Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: good (used), SCM M3 – Guide rail: 300 mm – Cutting height: 120 mm – Motor power: 22 kW – Weight: 1850 kg – Max. workpiece width: 100 cm – Min. workpiece length: 40 cm – Continuously variable feed rate control – Three rows of anti-recoil guards – Spindle diameter: 50 mm – Arbor diameter: 70 mm – Arbor equipped with gears and 5 saw blades – Saw blade diameter: 200 to 350 mm Ijdpfx Ajyn E Ibjm Djih – Automatic chain lubrication – Four upper pressure rollers The machine and guide rail are in very good condition.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 600 h, control type: manual, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 4,500 mm, tube wall thickness (max.): 4 mm, bending radius (max.): 96 mm, mandrel length: 4,500 mm, overall weight: 1,000 kg, For sale is a pipe bending machine, purchased in 2021 and used for only two years. Since then, it has been stored in a dry warehouse. It can bend pipes with a diameter from 12 mm to 48.3 mm and a wall thickness of 4.5 mm. Dies/jaws and mandrels for steel and stainless steel pipes are included. Self-collection required upon sale. Ijdpfx Amoxvhm Ij Deih

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 22 h, Powerful mini dumper in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 22 hours Year of manufacture: 2025 SCHORR tracked dumper RR500DHKA2 PRO: - 9.2 HP four-stroke engine - Self-propelled and powerful chain drive - 500 kg payload - Large and high-quality tipping trough with a large tipping angle - Foldable rider platform as standard - 6+2 gears - Robust and scratch-resistant - Top value for money SCHORR tracked dumper RR500DHKA2 PRO with hydraulic tipping system and rider platform The SCHORR tracked dumper RR500DHKA2 features a hydraulic tipping drive and a payload of 500 kg, as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. The robust transmission has 6 forward gears and 2 reverse gears. Thanks to its slim design (710 mm), the mini dumper can also navigate narrow paths and doorways, making it an extremely flexible means of transport. The mini dumper's powerful track drive allows you to easily negotiate rough terrain, inclines, and curbs. The rubber tracks provide secure footing in any work area. With a robust dumper made of heavy-duty sheet metal and a straight discharge that ensures quick and easy discharge, this dumper is a must-have for anyone who needs to transport heavy loads. Tipping on gentle inclines is also no problem. The large tipping angle ensures that even fully loaded dumpers are completely emptied without the need for manual assistance. This saves time and effort and makes the motorized wheelbarrow an indispensable tool for anyone who values efficiency and performance. The smooth-running track brakes ensure the dumper's excellent maneuverability. TECHNICAL DATA: Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR500 Model: DHKA2 Load capacity: 500 kg Tilt drive: Hydraulic (stepless) Traction drive: Chain Weight without/with packaging: 288 / 328 kg Drive Engine: Air-cooled single-cylinder four-stroke engine (OHV) Starter: Recoil starter Power: 9.2 hp Transmission: 6 forward gears / 2 reverse gears Speed Forward gear: max. 8 km/h Reverse gear: max. 5 Fluids Fuel tank capacity: 6 L (unleaded gasoline) Hydraulic oil tank capacity: 3 L (ISO VG 32) Transmission oil tank capacity: 1.5 L (SAE 80W-90) Engine oil tank capacity: 0.9 L (15W-40) Max. hydraulic oil flow rate: 9L/min Basic dimensions Total length of platform folded: 1800mm Iodjwh Nk Ijpfx Am Doih Total length of platform unfolded: 2000mm Total width (including chain): 710mm Total height: 1050mm Tank dimensions (internal dimensions): 740 x 665 x 435mm Tank dimensions (external dimensions): 1060 x 710 x 520mm Track width: 710mm Loading volume (liquid): ~ 200L Loading volume (heaped): up to 370L (depending on load) Drive chain dimensions: 180 x 60 x 38mm Ground clearance: 120mm Packaging dimensions: 1890 x 740 x 1220mm Filling height Side: 810mm Front: 580mm A TRUE ALL-ROUNDER The RR500DHKA2 mini dumper offers a flexible and mobile solution for transporting materials (e.g., bulk materials) in construction projects, especially on uneven terrain. Thanks to its compact design and track drive, the dumper is highly maneuverable, making it particularly suitable for construction and gardening work.

Condition: used, power: 6.77 kW (9.20 HP), Year of construction: 2025, operating hours: 23 h, Powerful tracked dumper in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 23h Year of manufacture: 2025 SCHORR tracked dumper RR500DHKAH PRO – Discover the advantages: - 9.2 HP four-stroke engine - Self-propelled and powerful chain drive - Hydraulic scissor lift (discharge height 1.44m) - 500kg payload - Large and high-quality tipping trough with a large tipping angle - Foldable rider platform as standard - 6+2 gears SCHORR tracked dumper DHKAH PRO with hydraulic tipping, rider platform, and scissor lift The SCHORR tracked dumper RR500DHKAH features a hydraulic tipping drive and a payload of 500kg, as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. The special feature of the RR500DHKAH is its hydraulically controlled scissor lift function. This allows you to eject the material up to a height of 1.44 m – ideal for trailers, containers, or other elevated surfaces. Thanks to its slim design (700 mm), the mini dumper can also drive through narrow paths and narrow doorways, making it an extremely flexible means of transport. The mini dumper's powerful track drive allows you to easily negotiate even rough terrain, inclines, and curbs. The rubber tracks provide secure footing in any work area. Raising and lowering the tipping body/box is effortless and effortless thanks to the hydraulic tipping drive, even when fully loaded. With a robust body made of heavy-duty sheet metal and a straight discharge that ensures quick and easy discharge, this dumper is a must-have for anyone who needs to transport heavy loads. Tipping on slight inclines is also no problem. The large tipping angle ensures that even fully loaded skips are completely emptied without manual assistance. This saves time and effort, making the motorized wheelbarrow an indispensable tool for anyone who values efficiency and performance. TECHNICAL DATA: Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR500 Model: DHKAH Load capacity: 500 kg Tilt drive: Hydraulic (stepless) Drive: Chain Weight without/with packaging: 363 / 388 kg Drivetrain Engine: Air-cooled single-cylinder four-stroke engine (OHV) Starter: Recoil starter Power: 9.2 hp Transmission: 6 forward gears / 2 reverse gears Speed Forward gear: max. 8 km/h Reverse gear: max. 5 km/h Fluids Fuel tank capacity: 6 L (unleaded gasoline) Hydraulic oil tank capacity: 3 L (ISO VG 32) Transmission oil tank capacity: 1.5 L (SAE 80W-90) Engine oil tank capacity: 0.9L (15W-40) Max. hydraulic oil flow rate: 9L/min Basic dimensions Total length of platform folded: 1900mm Total length of platform unfolded: 2100mm Total width (including chain): 710mm Total height: 1050mm Tank dimensions (internal dimensions): 740 x 665 x 435mm Tank dimensions (external dimensions): 1060 x 710 x 520mm Track width: 710mm Loading volume (liquid): ~ 200L Loading volume (heaped): up to 370L (depending on load) Drive chain dimensions: 180 x 60 x 38mm Ground clearance: 120mm Packaging dimensions: 1890 x 740 x 1220mm Iijdpfowh Nuaox Am Doh Filling height Side: 1030mm Front: 810mm Discharge height min./max.: 810 / 1440mm

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 16 h, Powerful mini dumper in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 16h Year of manufacture: 2025 SCHORR RR500DHKASH PRO tracked dumper – Discover the advantages: - 9.2 HP four-stroke engine - Self-propelled and powerful chain drive - Hydraulic bucket for self-loading - Hydraulic scissor lift (discharge height 1.44m) - 500kg payload - Large and high-quality tipping trough with a wide tipping angle - Foldable rider platform as standard - 6+2 gears The SCHORR RR500DHKASH tracked dumper features a hydraulic tipping drive and a payload of 500kg, as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. The RR500DHKASH's special features include its hydraulically controlled scissor lift function and self-loading bucket. This allows you to effortlessly load material and discharge it up to a height of 1.44 m – ideal for trailers, containers, or other elevated areas. Thanks to its slim design (825 mm), the mini dumper can also navigate narrow paths, making it an extremely flexible means of transport. The mini dumper's powerful track drive allows you to easily negotiate rough terrain, inclines, and curbs. The rubber tracks provide secure footing in any work area. Raising and lowering the tipping body/box is effortless and effortless thanks to the hydraulic tipping drive, even when fully loaded. With a robust body made of heavy-duty sheet metal and a straight discharge outlet that ensures quick and easy discharge, this dumper is a must-have for anyone who needs to transport heavy loads. Tipping on slight inclines is also no problem. The large tipping angle ensures that even fully loaded skips are completely emptied without manual assistance. This saves time and effort, making the motorized wheelbarrow an indispensable tool for anyone who values efficiency and performance. TECHNICAL DATA: Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR500 Model: DHKASH Load capacity: 500 kg Tilt drive: Hydraulic (stepless) Drive: Chain Weight without/with packaging: 439 / 464 kg Drive Engine: Air-cooled single-cylinder four-stroke engine (OHV) Starter: Recoil starter Power: 9.2 hp Transmission: 6 forward gears / 2 reverse gears Speed Forward gear: max. 8 km/h Reverse gear: max. 5 km/h Basic dimensions Total length of platform folded: 2320 mm Total length of platform unfolded: 2520 mm Isdpfx Amjwh Nvkj Djih Total width (including bucket): 825 mm Total height retracted/extended: 1230 / 1620mm Total height at maximum bucket tilt (90°) retracted/extended: 1780 / 2400mm Container dimensions (internal dimensions): 740 x 665 x 435mm Container dimensions (external dimensions): 1060 x 710 x 520mm Bucket dimensions (internal dimensions): 650 x 320 x 300mm Track width: 710mm Loading volume (liquid): ~ 200L Loading volume (heaped): up to 370L (depending on load) Filling height Side: 1030mm Front: 810mm Discharge height min./max.: 810 / 1440mm We at SCHORR are happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or email. We look forward to hearing from you and helping you with your consultation.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 17 h, ✅ New & in stock ✅ Carbide teeth ✅ 420 cc ✅ 230 mm ✅ Shipping available Powerful shredder in top condition for sale! The unit is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 22 hours Year of manufacture: 2025 SCHORR TREE STUMP GRINDER RR150BSF Iijdpowh Rnnsfx Am Doh Clear your garden of annoying tree stumps – quickly, efficiently, and effortlessly with our powerful tree stump grinder. The simple and clean solution for a well-maintained and beautiful property! -- 420cc gasoline engine with 12.4 HP -- Precision milling head with 8 carbide teeth -- With parking brake -- With transport handles -- Highly user-friendly -- Super compact design - easy to store -- Extremely robust and reliable EQUIPMENT / FEATURES PRECISE MILLING HEAD The RR150BSF tree stump grinder features 8 carbide milling teeth, which are ideal for particularly demanding tasks. The grinder enables fast and precise work, even on hard or petrified stumps. Removing the tree stump with our grinder eliminates the need for laborious rework. This saves both time and money on projects large and small. POWERFUL PERFORMANCE The efficient and powerful 420 cc four-stroke engine produces 12.4 hp and delivers sufficient power to effectively remove even large and deep tree stumps. The engine is particularly powerful and, in combination with the centrifugal clutch, offers consistent power delivery. EASY TO USE With ergonomically designed controls and intuitive operation, the stump grinder is easy to operate, even for users without extensive experience. Thanks to the two tubeless main wheels and the transport handle on the mudguard, the grinder can be easily transported to its destination. The parking brake also makes it easier to operate the grinder during work. HUGE TIME SAVINGS By using the grinder, you save a significant amount of time and effort compared to conventional removal methods (exposing the root, cutting through the root, loosening the stump, and removing the stump) – all with just a spade. For a tree stump with a diameter of 30 cm, someone with the appropriate experience and physical strength might need 4 to 8 hours; with the grinder, the job can be completed effortlessly in 30 to 180 minutes. Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR150BSF Number of cutting teeth: 8 (4 double teeth) Max. cutting depth / cutting height: -2300 mm / +2540 mm Max. rotation speed: 2500 rpm Weight: 113 kg Basic Dimensions Overall Length: 1710 mm Overall Width: 750 mm Overall Height: 1160 mm Cutting Tooth Dimensions L x W x H: 108 mm x 71 mm x 38 mm Engine Displacement: 420 cc Maximum Power: 9.1 kW / 12.4 hp Starter: Recoil Our competent team is happy to answer any questions you may have about the SCHORR RR150BSF Tree Stump Grinder. We look forward to hearing from you and providing advice. Do you find the purchase price of a tree stump grinder too high? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, please contact us:

Condition: used, functionality: fully functional, Year of construction: 2025, working width: 600 mm, ✅ Like new & in stock ✅ Ideal for tall grass & large meadows ✅ Shipping available SCHORR FLAIL MOWER RR600HM HEAVY-DUTY BRUSHCUTTER 8HP 252CC MULCHER - Effortlessly cuts tall grass and dense undergrowth - Powerful 252 cm³ 4-stroke engine (8 HP) – robust & reliable even in tough vegetation - 60 cm cutting width – ideal for large areas and tall grass - 32 Y-blades made from hardened steel – efficient shredding of material up to 2.5 cm in diameter - Rugged 4-speed gearbox – 3 forward & 1 reverse gear for maximum control Ijdpfx Aowufhcom Deih - Adjustable cutting height (20–80 mm) – precise results for any terrain - Self-propelled & easy to operate – also suitable for slopes and uneven ground FEATURES / SPECIFICATIONS Whether tall grass, dense brush, or woody growth: this flail mower completes the job reliably and with endurance. The SCHORR RR600HM is built for challenges – equipped with a robust Loncin 4-stroke petrol engine (252 cm³), delivering a full 8 HP. Its core is a 4-speed gearbox (3 forward / 1 reverse gear), allowing precise control even in demanding ground conditions. With 32 robust Y-blades made from hardened steel on a heavy-duty rotor, the RR600HM provides consistent and fine mulching. On meadows, orchards, field edges or fallow land – even tree cuttings of up to 2.5 cm in diameter are processed effortlessly. The 600 mm cutting width allows for efficient work and excellent maneuverability. Cutting height can be adjusted tool-free using a hand wheel (20–80 mm), so you can quickly adapt to any terrain and vegetation. The RR600HM is designed for intensive use – whether it’s overgrown gardens, large grass areas or agricultural settings. The heavy-duty build, coarse-profile traction wheels, and self-propelled drive system guarantee controlled handling – even on slopes and uneven ground. Up to 6,000 m² can be efficiently and comfortably maintained with this flail mower. A professional-grade flail mower for demanding users, farmers, municipalities, or landscapers. For anyone who wants more than just lawn mowing, this is a true powerhouse at a fair price. Technical Data Manufacturer (short): SCHORR Model code: RR600HM Drive type: Self-propelled (3+1 speed gearbox) Blade type: Hammer flails Number of blades: 32 Y-blades Cutting height min. / max.: 20mm / 80mm Cutting width: 600mm Weight: without packaging: 146kg / with packaging: 180kg Basic Dimensions Total length: 1790mm Total width: 730mm Total height: 1150mm Discharge angle: 360º Engine Air-cooled single-cylinder four-stroke engine (OHV) Displacement: 252cc Max. output: 5.9kW / 8HP Fuel type: Petrol (min. RON 95) Starter: Recoil starter (pull cord) Power transmission: V-belt Spark plug: F7RTC or equivalent Fuel tank capacity approx.: 5L Engine oil capacity approx.: 1.1L Our knowledgeable team is happy to assist you with any questions regarding the SCHORR RR600HM Flail Mower. You can reach us by phone or email. We look forward to hearing from you and providing expert advice. Are the acquisition costs for a flail mower too high for you? No problem – we often have used machines in stock. Feel free to contact us.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1968, machine/vehicle number: 51039/373, Rausch RS 6G (WAG 855) Vertical Internal Broaching Machine Manufacturer: Rausch (Haan/Rhineland) Isdpfxov Rmvzs Am Dsih Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Revision: December 2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch RS 6G, unused with "CE" marking Tensile force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table dimensions / work surface: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: any Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h = table height to floor without attachments) Motor power: 4.4kW / 5.5kW Power supply: 400V / 50Hz Features: - Geared motor drive with 2 working speeds - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with automatic door locking and safety interlock - New chip chute with tool storage option - Protective cover for the stroke adjustment - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge, providing additional safety for the operator and tools) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length adjustment system (reproducible across all machines) - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely reconditioned. All wear parts have been replaced. The machine has been updated to the state of the art and complies with current CE regulations. The machine is marked with a CE certificate. General The double spindle drive ensures a smooth and central pull point and a constant broaching speed (broaching speed optionally at 3 m/min or 6 m/min). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. The universal design of the drawbar and machine table allows broaching with profile and flat broaching tools without the use of additional drawing heads. Broaching tools and broaching mandrels suitable for the machine are available on request.

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: WAG 3102, Rausch/Wiemers SR 30 (WAG 3102) Vertical Internal Broaching Machine Manufacturer: Rausch/Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Year of manufacture: 2024 Weight: 480 kg Revision: 11/2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch SR 30, unused with "CE" marking Tensile force: 30 kN (3,000 kg) Iodpfx Amov Rpnmo Djih Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / work surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90mm for standard broaching mandrels "Rausch System" Workpiece diameter: any (removable coolant swivel system) Broaching capacity / groove width: up to 20mm in steel (from 16mm broaching tool width only with offset tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height to floor without attachments) Motor: 2.5kW/3.0kW 2-stage for 2 working speeds Power supply: 400V / 50Hz Equipment: - Gear motor drive with 2 working speeds - Modified Wiemers "SR" drive system - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with door lock, safety query, and safety monitoring - Easily removable chip chute with tool storage option - Externally adjustable tool length adjustment system (across all machines) reproducible) - Protective cover for the stroke adjustment and electrical switching units - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (Tool removal control prevents accidental retraction of the drawbridge, providing additional safety for the operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Extra-reinforced chip basket and chip sieve with magnetic insert - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - Electrical preparation for an external control element (16-pin connector) - Preparation for automatic clamping jaw opening during profile broaching via roller lever - Machine documentation with "CE" confirmation declaration Optional additional options: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600 mm - External electrical control unit for broaching and return stroke, as well as emergency stop operation Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely refurbished. All other components have been replaced. The drive system has been modified. The machine has been updated to the state of the art and complies with current CE regulations (as of 2024). General The dual-spindle drive ensures a smooth and central pull point and a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm. (From 16 mm keyways, only with stepped tool shanks). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyways.

Condition: not inspected (used), Year of construction: 1967, Manufacturer: Steinel Iisdjw H Rh Sjpfx Am Dsh Model: 5 Station Rotary Transfer Drilling Machine BE 10 VK Year of Manufacture: 1967 Weight: approx. 3,000 kg General / Technical Data: 5-station rotary transfer special drilling machine for horizontal drilling with multi-spindle heads Drilling units: 4 units Station 1 – loading and unloading Station 2 – horizontal drilling unit type: BE 10 VK Station 3 – horizontal drilling unit type: BE 10 VK Station 4 – horizontal drilling unit type: BE 10 VK Station 5 – horizontal drilling unit type: BE 10 VK Feed of drilling units: mechanical feed via quill Drill heads: multi-spindle drilling units Rotary table: mechanical indexing in 5 positions, Ø 400 mm Workpiece clamping: hydraulic, via centric mandrel, workpiece Ø approx. 80 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special features: • Machine is designed for large-scale production • Features a robust cast iron machine table with lateral chip removal and separate coolant tank • Automatic safety guard door • Equipped with a 5-station rotary indexing table • Heavy cast iron machine table, ideal for the retrofit or rebuilding of a special purpose machine • Suitable for refurbishment or conversion

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm Ijdpfxjvkpu Ho Am Deih max. module: 10 weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm max. workpiece diameter: 150 mm Counter holder milling mandrel is missing *

Condition: used, OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) is perfect machine for both tasks: cut-to-length cutting and longotudinal cutting of coil metal into strips with 2000mm coil width, 10mm maximum metal thcikness and 30t coils Iodpfx Amjtvdy Io Deih OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) Composition of the line: 1. Stocking ramp 2. Loading cradle 30t 3. Double cone uncoiler 4. Hydraulic peeler table 5. Arm with roll-press roller-bridge structure 6. Assembly including pinch-roll and pre-straightener 7. crop shear 8. tilting roller conveyor on pit 9. slitting shear shaft diam. 200mm 10. mobile side guide 11. tensioning rollway 12. side trim rewinder 13. burr crusher 14. recoiler + unloading crandle 30tons. 15. tensioning rollway to leveler 16. unger leveler 17. guillotine flying shear 18. pinch-roll for sheet ejection 19. stacker 20.roller conveyor for stack ejection 12mt. 21 hydraulic control unit 22. electrical equipment 23. tooling

Condition: good (used), Coil reel, unwinding reel, winding reel Load capacity: 10 tons Spreading range: up to 508 mm Spreading mandrel length: 1500 mm Several units available Iijdjipx Ufepfx Am Dsh Frequency inverter control Control cabinet has been newly refurbished. Hydraulic tensioning of the coil. The reel can be moved laterally using 4 rollers. Year of manufacture and manufacturer unknown.

Condition: used, Turret lathe, lathe with copying device, UMA Type F1 NK 60 Copying lathe for chucked workpieces Machine No. 28-0031, Year of manufacture 1971 Turning diameter max. 150 mm Swing diameter over bed 400 mm Turning length approx. 200 mm Spindle bore in the machine spindle approx. 42 mm Spindle speed 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power 5.5 kW Power connection 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gear stages - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm Isdsib D H Repfx Am Deih - Right side with copying slide, copying device SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system installed under the machine bed - Hydraulic unit located behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for turret lathe with hydraulic unit L x W x H 2900 x 1900 x 1700 mm Space requirement for turret lathe L x W x H 2400 x 1900 x 1500 mm Space requirement for hydraulic unit L x W x H 1400 x 850 x 1700 mm Weight of turret lathe 2400 kg Weight of hydraulic unit 400 kg Total weight with pallet 3000 kg Good condition

Condition: used, TECHNICAL DETAILS - distance between centers : 200 [mm] - centers height : 100 [mm] - strokes (X/Z) : 130 / 170 [mm] WHEELHEAD - grinding wheels dimensions : 400 x 63 x 127 [mm] - peripheral speed : 45 [m/sec] - power : 3 [kW] - positioned at : 30 [°] WORKPIECEHEAD - type of cone: MT4 - speeds : 600 - 3000 [rpm] - power : 0,5 [kW] - C axis indexing precision : +/- 0,5 [°] TAILSTOCK - type of cone : CM2 - quill stroke : 30 [mm] ELECTRICAL SUPPLY - voltage : 400 [V] - frequency : 50 [Hz] - installed power : 19 [kVA] DIMENSIONS - floor space : 1760 x 2180 [mm] - height : 2630 [mm] - weight : 4.000 [kg] HOURS - under power : 46.943 [h] - working hours : 21.529 [h] EQUIPMENT Iiedpfx Amsuhbxme Dsh - CNC FANUC 16TB - soft options : Studer Release B, Pictogramming - interface : RS232C - electronic deported handwheel - direct measuring rules on axes X/Z - tailstock with fine concentricity adjustment - tailstock pinole hydraulic recoil - swiveling dressing wheel upon table : FISCHER AES-72x230/3 - dynamic wheel balancing device : DITTEL HBA 4000 - prepared for diameter sensor : MOVOMATIC ES400 - prepared for parts loading/unloading robot : FELSOMAT - automatic front door - prepared for cooling - electrostatic aspiration : ELOSTA BF2000 - pneumatic collets chuck - 1 wheel-holder - 1 grinding wheel - support arm for zero gravity wheel change - 1 balancing shaft

Condition: used, Vacuum lifting device for paper rolls, NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg, Netherlands, Type R96-20 Manufacturer's No. 9745, Year of manufacture 1999 Load capacity 2000 kg Centering mandrel, Ø 90 mm Outer diameter of suction surface 850 mm (plus seal) Inner diameter of suction surface 250 mm (minus seal) Seal width 50 mm Suction surface area 0.5 m² Vacuum pressure min. -800 mbar Suction capacity approx. 100 m³/h per vacuum pump Motor power 2 x 2.2 kW Mains connection 400 V, 50 Hz - 2 Rietschle vacuum compressors, Type VCE 100 Iisdpodzqc Iefx Am Doh Dimensions Ø x H 1600 x 2250 mm Height with centering mandrel 2500 mm Overall height in transport frame 2950 mm Weight 2.5 tons.

Condition: good (used), amount 1 Palette Set of milling and lathe accessories, primarily Deckel-compatible tool holders, arbors, clamping accessories, and gears. -> SK/ISO-style tool holders — various lengths, some with clamping nuts, others with a through-hole for drive pins. -> Special Deckel tool holders — one holder is even labeled “Model Deckel.” -> Cylindrical collet holders — several sizes, neatly sorted in a red holder. -> Reducing sleeves — for adapting different tool shanks. Iedpezhcgaofx Am Doih -> Threaded adapters — short, thick adapter pieces with internal threads. -> Toothed drive shafts — several pieces, some with hex heads, some with longitudinal teeth. -> Arbors / milling mandrels — longer shafts with a pin or collar, typically used for milling cutters or disc tools. -> Short centering or guide pins — small cylindrical parts with threads or a press fit. -> Red tool holder block — for six collet holders. -> Green-red machine module — presumably part of a top milling machine (e.g., angle head or accessory holder). Complete package price

Condition: used, Technical specifications: Track width: 300 mm Max. cutting height: 120 mm Max. saw blade diameter: 350 mm Continuously adjustable feed rate Automatic lubrication system Anti-recoil protection Culaga Dust extraction port: 200 Safety switch Power supply: 380 V Main motor power: 25 kW Overall dimensions: Length: 1730 mm Width: 1490 mm Ijdpfx Aszzbfzjm Dsih Height: 1440 mm

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 053 389 601, Offered for sale is an extrusion tool for PVC, used in the manufacture of PVC pipes. Pipe diameter range, min.: Ø63 mm Pipe diameter range, max.: Ø160 mm Output: approx. 750 kg/h Design: Mandrel carrier system designed for PVC melts, completely made of 1.2316 Flow contour polished Equipped with cylinder heaters and thermocouple M14x1.5, type “J” Includes 3 m connection cable, without plug connector for the extruder Technical data: 230V, 50Hz for max. 3600W per zone, 16A Number of heating zones: 6 Iijdpfszhuqkox Am Djh Two copies of the operating manual, in German or English, are included in the scope of supply.

Condition: ready for operation (used), Year of construction: 2002, Flexoprinting machine CI type Bonardi Mira 1200 6 col. System: Sleeved Printing Width: 1200 mm Web Width: 1250 mm Printing Repeat (Max): 800 mm Printing Repeat (Min): 350 mm Plate-Cylinder Gear-Pitch Module: 5 mm Plate-Thickness, Sticky Back Included: 1,64 mm Drying System: Electrical Sleeve changeover central impression press Helical gears, pitch 5 mm Side register capability /- 10 mm Up-down register capability /- 7 mm Mechanical speed 250 m/min Web tension range 30-250 N Flexo inks solvent based and water No 6 pneumatic pumps Printing plate thickness 1,14 mm Sticky back adhesive thickness 0,50 mm Chill roller with OD 290 mm Double unwinder with automatic control tensión Electromagnetic powder brakes Pneumatic loaded dancer with two low inertia air cylinders Two air expandable shafts Reel max diam 700 mm Core diam. 3” Iiodjxuwanjpfx Am Dsh Doble rewinder Two motors CA Pneumatic loaded dancer with two low inertia air cylinders Micro switch to stop the press in case the web breaks or reel end Marriage roll pneumatic operated to enable to splice to be carried out at reducer speed with operator intervention PRINTING MANDRELS Nr. 02 sets of Nr. 06 mandrels ANILOX ROLLERS A total package of 10 ceramic coated and laser engraved aniloxes 260,100, 140 l/cm SLEEVE AND REPEAT GEARS Repeat 5 set of printing sleeves 350, 400, 450, 550, 600 BANANA ROLLER 1 Banana at the infeed (before nip on top of the central drum). 1 Banana at the infeed (before rewinder )

Condition: used, Technical data: - Strip thickness: 0,6 – 4,0 mm - Strip width: 600 –1550 mm - Coil I.D.: 508 –610 mm - Coil weight (max.): 25 ton - Coil O.D.: 2000 mm - Side trim: 3-9 mm - Working Speed: 100 – 200 m/min - Cutting shaft diameter: 180 mm - Knive OD: 300 mm - Max. Number of cuts with thickness 0.9mm: 25 Cuts - Max. Number of cuts with thickness 4mm: 3 Cuts - Average production previous owner: 10 coils/shift (8 h) Scope of supply: - 25Tn loading car with 2 loading positions - 25Tn Single mandrel uncoiler with - Supporting arm unit - Snumbber roll - Coil opener - Entry straightener with hydraulic Shear - Intermediate guiding table with vertical centering rolls - Circular shear: - With 180mm shaft diameter - Quick-change system with 2nd shaft on-line - Loop table with hydraulic cover - Strip guiding axe with spacer - Pneumatic felt-press brake - 25Tn Single mandrel recoiler Iisdpfx Aez Tylvjm Djh - 25Tn exit unloading car - 25Tn coil 1 arm turnstile - Scrap recoiler - Electrical cabinets & operator panels - Hydraulic group - Safety barriers and photoelectric barriers - Stairs, passages, and accessories - Documentation and manuals - Complete set of tooling (quantities to be confirmed) * Strip thickness: 0,6 – 4,0 mm * Strip width: 600 –1550 mm * Coil O.D.: 2000 mm * Coil I.D.: 508 –610 mm * Coil weight (max.): 25 ton * Working Speed: 100 – 200 m/min * Cutting shaft diameter: 180 mm * Knive OD: 300 mm

Condition: used, Machine description Used continuous finishing line for steel flat bar and strip, second-hand and for sale complete with 15 in-line stations. Entry section: DIMECO decoiler with expanding mandrel, roller straightener, welder, drive unit and loop table. Surface preparation: FISHER inline shot blasting machine with dust collector and suspended brush-shear. Sizing section: cold, dry 2-high rolling stand, continuous tension straightener and Zumbach USYS laser gauge. Exit section: pneumatic shear, cut-to-length shear, bar run-out conveyor and product-specific coil recoiler. Schneider Electric Magelis operator panel with bar and coil modes. Capacities, year of manufacture and installed power: not specified. Applications This descaling, cold rolling and sizing line converts hot-rolled strip or flat bar coils into shot-blasted, cold-rolled, straightened and gauged products, delivered as cut-to-length bars or coils. Typical buyers include steel mills, flat wire and strip producers, spring and blade manufacturers, stamping plants and flat product finishing centres. Key features / Advantages Complete finishing line from decoiling to packaging, with mechanical shot blast descaling instead of acid pickling. Components from active manufacturers (DIMECO, Zumbach, Schneider Electric) make spare parts easier to source. Bar or coil output on the same line. A second line of identical configuration is also for sale, and both can be purchased as a matched pair. Sold as-is, dismantling by the buyer, available now from All Metal, specialist in used industrial machinery. Configuration: 15 posts online Unwinder: DIMECO, expanding chuck Surface preparation: fisher nip fryer? Rolling: dry cold rolling cage (duo) Isdpfoz N Ahxox Am Dsih Straightening: roller straightener + continuous tension straightener Measurement: laser Zumbach USYS Cut: pneumatic shear + shear for length cutting Exit: bar rail conveyor + dedicated product winder Production modes: barrel / crown Order: Schneider Electric Magelis HMI Processed products: plates and steel straps Sale: as is, dismantling at the buyer's expense

Condition: used, Year of construction: 2026, Slitting line 1500 x 6, made by GUIDA Line composition: - Loading coil car - Uncoiler with sliding base and single expanding mandrel - Pressure arm - Feeding telescopic table with cutting edge and deflecting roll - Entry pinch roll - Crop shear - Tilting table - Mechanical centering device - Calming rolls - Slitting shear - Looping pit equipment (entry and exit saddles + connecting tables) - Felt press - Deflecting rolls - Titling table - Recoiler with single expanding mandrel - Separator arm - Electric equipment - Hydraulic equipment - Safety fences protection - Several tooling and accessories - Spare parts Material to be processed: Hot rolled carbon steel Material tensile strength: 400 N/mm² Coil width max.: 1.500 mm Thickness: 1 - 8 mm Coil weight: 20 Tn Coil inside diameter entry: 500/600 601 + steel spacers for bigger diameter Coil external diameter Entry/Exit: 1.700 mm Slitting shear mandrels diam.: 220 mm Blades diameter: 355 mm Line speed: 50/25 m/min with manual speed change gear Working Direction: From left to right Power supply tension: 380/50 Hz Iisdpjymciajfx Am Djh

Year of construction: 2001, condition: excellent (used), functionality: fully functional, CNC mandrel bending machine including O-ring assembly Fully automatic, high-precision production cell for the series production of pipework systems (e.g. brake, fuel or hydraulic lines), including a robot, feeding system, dual O-ring assembly and high-quality testing technology. The system combines the legendary precision of a MIIC CNC bending machine with the flexibility of robot-assisted handling and integrated quality assurance. Iiedpfx Amezz Hmqo Dsh The system is ideal for suppliers to the automotive industry, mechanical engineering or fluid technology sectors. Technical data 1. CNC mandrel bending machine Manufacturer: MIIC (Chubu MIIC Co., Ltd., Japan) Type: EMO-20R-S Year of manufacture: 2001 Control system: Multi-axis CNC control with operator panel Special features: Collet head movable in X / Y / Z, equipped with 3 bending planes for highly complex three-dimensional shapes without tool changes. 2. Loading and unloading robot Manufacturer: Motoman (Yaskawa) Model: ERCS-UP6-A00 Year of manufacture: 2000 Robot control: XRC including original teach-in terminal (handheld control unit) 3. Automatic O-ring assembly stations Manufacturer: ASM HASEMO GmbH Type: MOSA-800 / MOSA-1100 Year of manufacture: 2010 (high-quality upgrade/retrofit) Function: 2 O-ring assembly stations including a complete bulk material feed system (vibration hoppers/spiral conveyors) for twist-free and gentle external assembly of sealing rings. 4. Quality assurance & peripherals Measuring computer / leak tester: Innomatec, type: LT-C602 (for direct in-line testing) Blow-off station: Integrated for cleaning