Used Rexon Rdm for sale (243)

Condition: used, Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor servo motor Nsdpfx Ajq Adp Rohzjkt -Type: RDM 599/50 -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm -Weight: 2.5 kg

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp Nkjdpfx Ahsq Nn Hcjzjt The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: excellent (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, exhaust gas temperature (max.): 400 °C, Smoke Extraction Roof Fans from Stock Manufacturer: Nicotra-Gebhardt Nkjdpfx Aoxuwqgshzjt 2 units RDM 56-4550-4W-16 Airflow: 6,250 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 2.2 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €3,019 – 60% discount 1 unit RDM 56-5671-6W-21 Airflow: 12,000 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 9 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €4,606 – 60% discount 1 unit RDM 56-3535-4W-10 Airflow: 2,050 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 0.55 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €2,213 – 60% discount 1 unit RDM 56-2528-2W-11 Airflow: 2,850 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 1.1 kW Voltage: 3x230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €2,023 – 60% discount These as-new fans were initially installed but never operated. As the intended purpose was not achieved, the fans were removed again and are now palletized and ready for collection.

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Nkedpfxsq A Um Rs Ahzjt Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Condition: new, Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Tapping steel Ø: 40 mm Tapping capacity cast iron Ø: 50 mm Diameter of the column: 300 mm projection (min/max): 305 - 1275 mm travel of the spindle head (horizontal): 970 mm distance spindle nose - base plate (min/max): 438 - 1330 mm Traverse height of the cantilever: 625 mm Clamping surface of cube table : 635 x 520 x 420 mm size base plate : 1830 x 785 x 185 mm spindle mounting: MK 5 spindle stroke: 270 mm Speeds: (12) 44 - 1206 min-1 feeds: (3) 0.06 / 0.10 / 0.20 mm/rev. Motor power, approx.: 3,7 kW Total height, max.: 2795 mm Weight, approx.: 2300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping. - A special lift safety device prevents the arm from falling off abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard Equipment: Nkedpfxop Atips Ahzjt - Threading device - Coolant device incl. pump - machine light - cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - protection device for spindle - CE

Condition: new, Radial drilling machine with hydraulic clamping and thread cutting device. Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Thread cutting steel Ø: 40 mm Thread cutting cast iron Ø: 50 mm Diameter of the column: 320 mm Projection (min/max): 330 - 1650 mm Travel of the spindle head (horizontal): 1320 mm Distance spindle nose - base plate (min/max): 465 - 1405 mm Travel height of the cantilever: 670 mm Clamping surface cube table: 630 x 500 x 500 mm Base plate size: 2550 x 970 x 200 mm Spindle holder: MK 5 Spindle stroke: 270 mm Speeds: (12) 37 - 1253 1/min Feed rates: (3) 0.06 / 0.10 / 0.20 mm/rev Motor power, approx.: 3.7 kW Max. total height: 2790 mm Weight, approx.: 3300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping - A special lifting safety device prevents the arm from dropping abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury, even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard equipment: - Tapping device - Coolant device incl. pump - Machine light - Cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - Protective device for spindle - CE Nkjdouxrtfopfx Ahzjt

Condition: used, This listing is for the Heidolph MR Hei-standard Magnetic Hotplate Stirrer The unit is in full working condition and is ready for immediate use Nkedpexhfqnofx Ahzjt The Heidolph MR Hei‑Standard is a laboratory magnetic hotplate stirrer—a reliable and robust device designed for simultaneous heating and stirring of liquids up to moderate scales. Key Features & Technical Specs Heating & Stirring: It heats up to 300 °C on the hotplate (with sample temperatures reaching around 250 °C) and stirs with speeds up to 1,400 rpm, capable of handling volumes up to 20 liters of water Heating Power & Plate: Offers around 800–825 W of heating power, using a ceramic-coated silumin (Kera‑Disk®) plate that ensures excellent heat distribution and resistance to scratches and chemicals Controls & Accuracy: Features analogue dials for setting temperature and speed (typically from 100 to 1,400 rpm), with speed accuracy of ±2% and temperature setting accuracy of about ±5 °C (or ±1 °C when using an external sensor)

Condition: good (used), Power supply, DIN rail -Manufacturer: Schneider, power supply from lathe DMT CD 480 / CD 320 -Type: NGDA 2415-920132T4 -Power: 360W Nkedpfxefrltqj Ahzot -Input: 3 x 400V -Secondary: DC 24V -Quantity: 2x power supply available -Price per piece -Dimensions: 185/115/H140 mm -Weight: 6.2 kg/pc.

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 15 m/min, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - BudgeCraft CNC ROUTER - Best Price-Quality CNC - CNC Router: Wood, Plastic & Aluminum Processing - High Precision (0.01mm) Milling - No Annual License Fees Descriptions: The most complete CNC machine for wood, plastic, and aluminum. Fully servo-driven for the most complex operations. Starting at €34,500. - Take advantage of a fixed price for CadCam software and starter kit. - Assembled in the Netherlands according to the strictest CE standards. - Powerful 9KW ATC spindle and speeds up to 50m/min. - Equipped with automatic tool change magazine for up to 16 tools. - From standard milling jobs to complex projects. - BudgeCraft offers the highest precision and lowest purchase price for professionals. Featured Highlights: * No hidden license fees * CadCam Professional - translates; Image BMP, JPG, TIF, GIF, PNG vector files * Formats: Adobe Illustrator, DXF (AutoCAD), EPS, PLT, TXT * 9kW ATC spindle, air-cooled * Ready to use CNC ROUTER: Precision CNC ROUTER Specifications: Review the technical details of our 0.01mm precision machines. Work Area & Options: From 1300x2600 - 1600x3200 - 2100x3200mm. Nodpfxjx Sx Rfs Ahzekt CE Safety: Why our machines are the safest choice for your workshop. Compliant with the New Machine Guidelines 2026. Full technical specifications available on the Danmar Machines Bv website: X-Axis work area : 2600, 3200mm Y-Axis work area : 1300-1600-2100mm Z-Axis stroke : 200mm Gantry construction : Yes, servomotors Spindle motor : 9Kw Servomotor (ATC spindle) Speed : 1,000-24,000 RPM X-Axis travel : 50m/min Y-Axis travel : 50m/min Z-Axis travel : 15m/min Holder : ISO30-ER32-ER40 Software : Pegasus PWoodMilling Vacuum pump : included Contact us for more information.

Condition: used, Year of construction: 2005, turning diameter 290 mm turning length 300 mm control Heidenhain Nodsyb S Ihspfx Ahzjkt greates pass round over bed 380 mm total power requirement --- kW weight of the machine ca. --- t dimensions of the machine ca. --- m

Condition: good (used), Year of construction: 2018, functionality: fully functional, Coated web width 1315 mm Max. web width 1330 mm Max Core width with expanding chucks 1300 mm Max Core width with Standard cones. 1340 mm Minimum web width 650 mm Unwinder reel diameter 1000 mm Rewinder reel diameter. 1000 mm Nsdpsu Upupefx Ahzekt Core size - unwinder: 3”= 76 mm & 6”= 152 mm - rewinder 6”= 152 mm Max. web tension - unwinder 40 kg (400 N) - rewinder 55 kg (550 N) Taper tension on rewinder up to 60% of the set value. Min. web tension - unwinder: 2 kg (20 N) - rewinder: 4 kg (40 N) Max reel weight: 1.000 kg Max mechanical speed: 450 m/min COATED WEB BOPP 12 - 80 μ PETP 10 - 30 μ LDPE, LLDPE 30 - 200 μ OPA 12 - 18 μ NYLON CAST 30 - 80 μ ALU (Foil) 6,3 - 40 μ PP CAST 60 - 150 μ PAPER 40 - 150 gr/m2 LAMINATED WEB BOPP 12 - 80 μ PETP 8 - 30 μ LDPE, LLDPE 20 - 200 μ OPA 12 - 18 μ NYLON CAST 20 - 80 μ ALU (Foil) 6,3 - 40 μ PP CAST 20 - 150 μ COEX FILM 25 - 200 μ PAPER 40 - 150 gr/m2

Condition: good (used), Fully automatic MOSCA strapping machine RO-TR 700-2 Manufacturer: Gerd Mosca GmbH Type: R0-TR700-2 Nodpfstzbhcsx Ahzokt PLC control Control panel for setting the operating modes, strapping distances, strap tension Automatic PP straps width 5, 6, 7, 8, 9 or 12 mm Operating voltage: 400 V 3AC Power consumption: 3 A Power: 2.1 kW Frequency: 50 Hz Castors: four swivel castors, two of which are lockable Overall dimensions: approx. 1350 x 1200 x 1650 mm (WxDxH) Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Automatic strapping machine Mosca RO-TRP-4 Features: - Can be integrated into any line - Direct transport system with frequency control, adjustable from 0.15 - 0.8 m/s - IFM Ecomat 100 control unit with display - Hot welding system with electronic heating control - Fully automatic strap threading system - Adjustable strapping distance via the control panel - Adjustable strap tension - Determination of the strap end with ejection of remnants - Automatic ejection of the strap rings in the event of incorrect strapping - Structure painted blue - RAL 5010 The opening is 74cm wide and 53cm high Njdpfx Ahot Srxgszekt Strapping capacity: Up to 46 strappings / min. Electrical power: 400 V, 50/60 Hz, 3 phases Consumption: 1.5 KVA Weight: 300 kg. Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Strapping machine Mosca RO-M Manufacturer: Mosca Type: RO-M Semi-automatic carton strapping Strap width: 4 to 12 mm Hot wedge welding system Adjustable strap tension Control: ecomat 100 Foot pedal for strapping release Table surface: W 640 mm Working height: 830 mm Power supply: 400 V Further articles in other sizes - new and used - can be found in our store! International shipping costs on request! Nksdpfjtncc Usx Ahzst

Condition: used, functionality: fully functional, Technical details: Nedsv Ex Rtspfx Ahzekt • Manufacturer: Gerhard Müller, Nuremberg • Model: AZMETALL • Machine type: Pillar drilling machine • Speed ranges: 300 / 500 / 850 / 1300 / 2250 rpm (continuously adjustable via belt drive) • Max. drilling diameter: approx. 25-30 mm (depending on the material) • Spindle mount: Morse taper (probably MK2 or MK3) • Drilling depth: approx. 120 mm • Table: Height adjustable and rotatable around the column • Drive: Electric motor with belt drive, 380 V (three-phase current) • Condition: Used, fully functional, ready for immediate use

Condition: used, Year of construction: 2013, • Web width: 1300 mm • Max mechanical speed: 400 m/min (depending on materials and process) • Substrate types: Film, foil, paper, and combinations thereof Main Components and Features Automatic web tension control across all unwinds and rewinds Motorized adjustment for nip pressure and web alignment Touchscreen HMI for process control and recipe management Modular design for easy access and maintenance Web inspection and defect detection (if installed) Corona Treatment Unit Nordmeccanica Solventless Mixing Unit Continuous, inline mixing of two-component adhesive system Nsdpsxg Hqaofx Ahzokt Equipped with: Precision gear pumps for both A and B components Automatic ratio control and monitoring Pumps for continuous filling to ensure uninterrupted production Easy-access design for cleaning and maintenance Drying Tunnel Equipped with 2 thermal oil heating batteries Provide stable and efficient heat transfer Maintain consistent tunnel temperature, essential for proper adhesive drying Integrated with 2 modulating valves Automatically adjust the thermal oil flow Enable fine control of tunnel temperature for different lamination applications LEL (Lower Explosive Limit) Monitoring System Zellweger LEL sensor. Continuously monitors solvent vapor concentration

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Nodpjvf D Anjfx Ahzokt

Condition: used, Year of construction: 2014, functionality: fully functional, Coated web width 1315 mm Max. web width 1330 mm primary unwinder: 1000 mm Nkjdpfxowp R Hto Ahzet secondary unwinder: 1200 mm rewinder: 1200 mm speed: 400 m/min Accessories: - Solvent-less mixer Nordmeccanica - Continuous filling World Mixer (with 4 tanks of 200 kg) - 5 rolls Materials: COATED WEB BOPP 12 - 80 μ, PETP 10 - 30 μ, LDPE, LLDPE 30 - 200 μ, OPA 12 - 18 μ, NYLON CAST 30 - 80 μ ALU (Foil) 6,3 - 40 μ, PP CAST 60 - 150 μ, PAPER 40 - 150 gr/m2 LAMINATED WEB BOPP 12 - 80 μ, PETP 8 - 30 μ, LDPE, LLDPE 20 - 200 μ, OPA 12 - 18 μ, NYLON CAST 20 - 80 μ ALU (Foil) 6,3 - 40 μ, PP CAST 20 - 150 μ, COEX FILM 25 - 200 μ PAPER 40 - 150 gr/ m2

Condition: excellent (used), Year of construction: 2021, Coated web width 1315 mm Max. web width 1330 mm Max Core width with expanding chucks 1300 mm Max Core width with Standard cones. 1340 mm Minimum web width 650 mm Nkodpjwqdikjfx Ahzst Unwinder reel diameter 1000 mm Rewinder reel diameter. 1000 mm Core size - unwinder: 3”= 76 mm & 6”= 152 mm - rewinder 6”= 152 mm Max. web tension - unwinder 40 kg (400 N) - rewinder 55 kg (550 N) Taper tension on rewinder up to 60% of the set value. Min. web tension - unwinder: 2 kg (20 N) - rewinder: 4 kg (40 N) Max reel weight: 1.000 kg Max mechanical speed: 450 m/min

Condition: used, Year of construction: 1996, Web width: 1,300 mm Mechanical speed: 300 m/min Unwind diameter: 800 mm (shaftless, single-position) Rewind diameter: 800 mm (shaftless, single-position) Core diameter: 3" Web direction control: Integrated web guiding system Nksdpfxjw N Nhzs Ahzjt

Condition: excellent (used), Year of construction: 2003, operating hours: 9,100 h, I have for sale a CNC LATHE DMG GILDEMEISTER CTX 310 V3 driven tools. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control: Heidenhain Data Pilot 4290 Country of manufacture: Germany Year of manufacture 2003 - Number of machine operating hours 9144 hours Machine parameters: - head: 12 - tools for VDI-30 holders + TurnPlus attachment - max. rpm 5000 /min. - C axis - driven tools Nksdpfx Aovxxhfehzjt - hydraulic tailstock - Through spindle - max. turning diameter X axis: 190 mm - max. turning length Z axis: 455 mm - cooling system - hydraulic chuck Three-jaw SMW AutoBlock - spindle bore Fi-50mm - chip conveyor - full programming instructions - Mechanical and Electrical Documentation - Machine weight: 3.8t. - loading included in the price Machine after a full inspection. 100% efficient. Connected and ready to work. WE ALSO TAKE CARE OF ALL PROCEDURES RELATED TO LEASING!!! Stal-Com has been selling, servicing and training CNC machines from the DMG group for 17 years. We specialize in all models of Gildemeister lathes and Deckel Maho Machining Centers. All machines undergo a meticulous technical inspection. Our machines are purchased by customers from all over Europe and part of Asia, in addition to customers from Poland. Each machine can be checked during production because we also do machining. After purchasing a machine in our company, we conduct training for the crew and we can also set up the production of parts at the customer's. We cooperate with many companies on the basis of permanent cooperation to which we supply subsequent machine tools

Condition: used, mileage: 223,953 km, power: 235 kW (319.51 HP), first registration: 03/2011, fuel type: diesel, empty load weight: 12,750 kg, maximum load weight: 5,250 kg, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 4,100 mm, brakes: engine braking, color: beige, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 2, loading space length: 4,200 mm, loading space width: 2,450 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, compressed air brake, crane, cruise control, differential lock, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, * German vehicle * Single owner * Documentation and inspection books available * Only 223,953 km original mileage * Condition as per photos * 4x4 all-wheel drive (HydroDrive) * Body: Schwarzmüller three-way tipper with HIAB crane * HIAB crane foldable behind the cab * Type 144E S-4HIDUO * Lifting capacity: at 2.3 m = 5,800 kg; 4.4 m = 3,100 kg; 6.2 m = 2,100 kg; 8.1 m = 1,520 kg; 10.2 m = 1,180 kg; 12.4 m = 960 kg * With radio remote control * Floor-level control * 5th and 6th hydraulic control circuits * Hook height 15 meters * 4 hydraulic extensions * 2 hydraulic outriggers * Meiller three-way tipper * Loading area: length 4,200 mm x width 2,450 mm x height 1,000 mm * Bordmatic system on the left * High side panels * Platform with access ladder * Trailer coupling * Trailer load: 24,000 kg * Gross train weight: 44,000 kg * Rear hydraulics * Air conditioning * Auxiliary heating * Multifunction steering wheel * Cruise control * ABS and ASR * Sunroof * 8-speed manual gearbox * Engine brake * Leaf and air suspension with lift/lower function * Differential lock * Front shunting coupling * Reversing camera * Rear window * Radio/CD * Electric windows * Sunblind * Electrically heated mirrors * Work lamps * Driver's seat: comfort air-suspended & heated * Additional spotlights * Tool box * Beacon lights * Heated windshield * Wheelbase 4,100 mm * Perm. gross vehicle weight 18,000 kg / technically up to 21,000 kg * Curb weight: 12,750 kg * Payload: 5,250 kg / technically up to 8,250 kg If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, DGUV, SP or UVV certificates. You will find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Njdpfox Avaiox Ahzskt Note: We offer and strongly recommend an inspection and examination of the goods to prevent any misunderstandings regarding their condition and suitability. Inspections and viewing appointments are possible at any time by arrangement and expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect details in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: used, mileage: 367,788 km, power: 368 kW (500.34 HP), first registration: 10/2016, fuel type: diesel, empty load weight: 14,400 kg, maximum load weight: 17 kg, overall weight: 32,000 kg, axle configuration: 8x4, wheelbase: 2,600 mm, brakes: retarder, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space volume: 12 m³, loading space length: 5,400 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, seat heater, soot filter, * complete documentation available * Original ONLY 367,788km * Condition, see photos * On-board system right, left and rear * Body by premium manufacturer Trösch Kipper * Trough dimensions 5.40 m x 2.50 m x 1.05 m * Leaf spring suspension * Maneuvering coupling * Air conditioning * Retarder * Multifunction steering wheel * Differential lock * Cruise control * Electric windows * Heated electric mirrors * Air-sprung comfort seat Njdpfxsv Hb D Ej Ahzjkt * ABS * Central locking * Telephone preparation/hands-free system * Power steering * Navigation system * ESP * On-board computer * Heated outside mirrors * Seat heating * Sunshade * Wheelbase 1.80 m + 2.60 m + 1.40 m + 1.30 m * GVW 32,000 kg. * Payload 17,700 kg. If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false ideas about their condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, mileage: 351,390 km, power: 331 kW (450.03 HP), first registration: 03/2016, fuel type: diesel, empty load weight: 14,400 kg, maximum load weight: 17,600 kg, overall weight: 32,000 kg, axle configuration: 8x4, wheelbase: 2,600 mm, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space volume: 14 m³, loading space length: 5,400 mm, loading space width: 2,500 mm, loading space height: 1,050 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, * original ONLY 351,390km * Condition, see photos * 14m³ 3-sided steel tipper * On-board system left and rear * Construction of the premium manufacturer MOSER tipper * Trough dimensions length = 5,400 mm x width = 2,500 mm x height 1,050 mm * Air conditioning * Hill start assist * Leaf spring suspension * Maneuvering coupling * Retarder * Multifunction steering wheel * Differential lock * Cruise control * Radio CD * Electric windows Nkjdpfx Aov Hfraehzot * Immobilizer * Electric mirrors, heated * Auxiliary drive * On-board computer * Power steering * ABS, ESP * Particle filter * Air-suspended comfort seat * Seat heating * Sunshade * Wheelbase 1.80 m + 2.60 m + 1.40 m + 1.30 m * GVW. 32,000 kg. * Payload 17,700 kg. If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false ideas about their condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, mileage: 332,238 km, power: 368 kW (500.34 HP), first registration: 02/2018, fuel type: diesel, empty load weight: 14,500 kg, maximum load weight: 17,500 kg, overall weight: 32,000 kg, axle configuration: 8x4, wheelbase: 2,600 mm, brakes: retarder, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space volume: 12 m³, loading space length: 5,300 mm, loading space width: 2,450 mm, loading space height: 1 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, power assisted steering, seat heater, soot filter, * complete documentation available * Original ONLY 332,238km * Condition, see photos * On-board system right, left and rear * Structure by premium manufacturer Trösch Kipper * Trough dimensions 5,400mm x 2,500mm x 1,000mm * Adjustable collision protection * Maneuvering coupling front & rear * Air conditioning * Retarder * Multifunction steering wheel * Differential lock * Lane assistant * Cruise control * LED daytime running lights * Radio with navigation * Electric windows * Electric mirrors, heated * ABS, ESP * Air-suspended comfort seat * Seat heating * Storage box * Telephone preparation/hands-free system Nksdsv Efnropfx Ahzst * Leaf spring suspension * Central locking * Roof hatch * Wheelbase 1.80 m + 2.60 m + 1.40 m + 1.30 m * GVW 32,000 kg. * Payload 17,700 kg. If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false ideas about their condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .