Used Riveting for sale (105)

Condition: ready for operation (used), In use from 1991 until it was last used and has been little prone to problems despite being a 1990s Chinese punching and riveting machine for oval eyelets. Ljdpfjx Nd U Dox Ahzorg

Condition: used, tank capacity: 3,860 l, GENERAL INFORMATION Equipment: Crane lugs Design: Suspended Notes: Support ring, Fe; manhole cover incomplete (see photos) Rotation speed: 61 rpm External diameter: 2,090 mm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Total height: 3,050 mm Heating/Cooling: available Insulation: available Power: 4 kW Max. permitted operating temperature: 200 °C Max. permitted operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: Beam agitator Stand/base type: Ring Location: Bremen Technical documentation: Drawing, various documents Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,860 litres Double jacket volume: 136.0 litres Cylinder wall thickness: 6 mm Product contact material: V4A 1.4435 (AISI316) Condition: used Last application: pharmaceutical chemistry VESSEL Max. permitted operating temperature: 200 °C HEATING/COOLING JACKET Max. permitted operating vacuum: 1.0 bar Lodoxqaxlopfx Ahzjrg Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: riveted Insulation jacket material: aluminium EQUIPMENT Manway / Dome: in upper head (DN 600) Outlet: available Note: Dents in insulation jacket, manway cover plated MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 400/690 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.17 mm Agitator arrangement: centrally positioned in upper head Agitator equipment: Gearbox housing slightly damaged in one area (see photos) Upper head wall thickness: 8.14 mm

Condition: ready for operation (used), General Location Kundl (Austria) Condition used Ledel Avmcjpfx Ahzerg Tank volume 118,000 liters Vacuum 0.25 bar Max. Overpressure 0,99 bar Floors dished bottom Construction form upright Stand frame Insulation insulation available insulation jacket riveted Technical data / dimensions Diameter inside 4,410 mm Diameter outside 4,700 mm Cylindrical height 6,500 mm Total height 10,860 mm Equipment Technical documents Drawing Manhole / dome in cylinder, in top Type plate Outlet Flange DN100 Material Properties Material in contact with product V4A 1.4571 (AISI316)

Condition: good (used), Hello, -The subject of sale is. Lrjdpfx Ahjv I E Scszsg -Hang 87D 3P double-head riveter. -Manufacturer: Hang Germany. -Good condition. -The machine is used to rivet eyelets. -Two riveting heads, with adjustable spacing. -Cardboard thickness 0.2-4mm -Weight 570kg -380V power supply -Possible transport by freight forwarder (individual valuation)

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope Lrsdpfx Ahsxwp Nyszeg of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Year of construction: 1970, Brand HILGELAND Lodpfxeu Szucs Ahzjrg Type CH 5 ALL Year of build 1970 Serial number 5282 Electric connection 380V Dimension l 5500mm Dimension w 2200mm Dimension h 1900mm (screw and rivet), capacity : M6 - M14, cutting length max. 200mm, variable speed: ... up to pieces 90 p/min, diameter 16mm

Condition: new, Year of construction: 2025, functionality: fully functional, Pneumohydraulic, Pneumatic and hydraulic Presses 0,2T–50T – Efficient, Cost-Effective, and EU-Compliant! We offer high-quality pneumohydraulic presses with a pressure range from 0,2T to 50T, combining high efficiency, energy savings, and maximum workplace safety. Our machines fully comply with all EU regulations, including the Machinery Directive 2006/42/EC, and come with complete technical documentation and a CE Declaration of Conformity. Key Features of Our Presses: ✅ Powerful and precise – smooth operation with advanced pneumohydraulic technology ✅ Energy-efficient – lower energy consumption compared to traditional hydraulic presses ✅ Enhanced safety – customizable safety features (light curtains, protective covers, two-hand control) Lrsdjv Snixepfx Ahzsg ✅ Flexible control systems – available in manual, semi-automatic, or fully automatic configurations ✅ Tailor-made solutions – we design and manufacture presses according to your specific requirements ✅ Versatile applications – ideal for stamping, punching, assembling, riveting, and bending ✅ Robust construction – built for durability and reliable operation in demanding conditions ✅ Complete documentation – each press is delivered with an operating manual, technical diagrams, and a CE declaration Our pneumohydraulic presses are the perfect solution for European industries, offering high productivity, safety, and full compliance with EU standards. 📞 Contact us today for a customized offer tailored to your needs! 📩 Feel free to contact us via email

Condition: good (used), Hang 101-50 Eyeletting machine The machine is in perfect condition and ready to use. Technical specifications: 1 eyeletting head (Hang 271 rivet, hole diameter approx. 6mm) Maximum capacity: 20 sheets 230V power supply Front and side margins Operation: foot pedal or hand switch. Ledpjx N I Rpsfx Ahzerg The machine punches and crimps the eyelet in a single pass. Automatic eyelet feeding.

Condition: excellent (used), Year of construction: 2020, color: other, Internal dimensions: 7,300 x 2,472 x 2,550 The aluminum swap body T.SWAU BK, which is on average 750 kg lighter than usual products on the market and therefore enables a larger loading capacity, Talson's innovative self-supporting box construction is manufactured in a special aluminum sandwich design. In addition, modular aluminum side walls are made of 6 separate plates riveted with aluminum omega profiles, which enables cost-effective and quick repairs if necessary. Aluminum has good UV resistance (non-yellowing) and aging resistance and is easy to clean due to its low dirt adhesion. Talson T.SWAU BK is equipped with a robust aluminum Talfix load securing system with multiple holes to enable different wagon loading models in one box. As part of the patented Talfix load securing system, the double deck bar with 1 daN capacity each allows the creation of a second level in the vehicle for maximum load capacity. Talfix® is suitable for double deck applications that allow multi-level loading with 700 kg capacity per 1 m. = More information = Ledpfxeuxvbae Ahzsrg Year of manufacture: Jan 2020 GVW: 16.000 kg Dimensions (LxBxH): 7450 x 2530 x 2750 cm Technical condition: very good Visual appearance: very good Registration number: 1078 = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included. Lrjdex Ncu Aopfx Ahzog

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), Air circulation oil / gas chamber furnace model SOS 80 O Exhibition machine Lrsdpfx Aoc Nbitohzeg Technical data: Usable space dimensions: Width approx. 1200 mm Height approx.: 1800 mm Depth approx.: 3000 mm trolley on request material Housing inside: Sheet steel 0,8 mm FAL welded or riveted tightly Outside housing: sheet steel 0.8 mm Base plate sheet steel 1.5 mm Painting: RAL 1013, as standard, powder coated Insulation material: Mineral wool Insulation thickness: walls - 160 mm ceiling: up to 240 mm, 100 kg/m3 dense Performance data: Heating mode: oil Heating capacity: approx. 80 KW 1 oil burner a' 80 kW Total connected load: approx. 5,4 KW Temperature range: up to 250°C, infinitely variable Changes and errors in the technical data, and prices as well as subject to prior sale.

Condition: used, throat depth: 610 mm, Pressing force (72 kN) with 610 mm dept Automatic lower tool changer with 4 stations Automatic upper tool changer with 4 stations Lredsxfi Npspfx Ahzeg Reliable and energy-efficient thanks to fully hydraulic system Equipped with patented safety system as standard Advanced control with touch screen and automatic press-in fastener length control Equipped with 2 * MAS-350 modular feed systems for press-in elements

Condition: excellent (used), Year of construction: 2005, Hot water tank/heat storage tank made of V4A, upright Technical data / dimensions Available quantity: 1 Volume: approx. 164,000 liters Tank type: Storage tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 3,900 mm External diameter: approx. 4,200 mm Cylindrical height: approx. 13,000 mm Total height: approx. 17,220 mm Weight: approx. 10,500 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: unpressurized Wall thickness shell / cylinder: approx. 5.3 - 7 mm mm Ground clearance: approx. 1,800 mm Operating temperature: -10°C/+90°C degrees Celsius Material / properties Material inner jacket: V4A (1.4571) Material double jacket: Stainless steel Inner surface: 2B Weld seams ground on the inside Insulation Insulation available Insulation thickness: approx. 100 mm Insulation material: Mineral wool Lrodpjqagl Hsfx Ahzeg Insulating jacket material: Aluminum Insulating jacket: screwed/riveted Notes: Cone roof cladding: Stainless steel Cylinder cladding: Aluminum trapezoidal sheet Cone cladding: Aluminum smooth sheet Equipment Stand form: foot ring/stand frame Fastening: fixed Top shelf type: Conical base Bottom shelf type: Conical base Top floor: 1 x dome DN 200 with insulating cover 1 x flange DN 32 welded in the dome (CIP) 1 x DN 32 dome drainage 1 x DN 50 cable conduit 1 x overflow DN 150 2 x crane eye Jacket: 1 x inlet pipe DN 100 1 x filling pipe DN 100 4 x thermometer sleeve (ø 26 mm) with insulation box 1 x CIP line DN 32 1 x type plate 1 x access door (approx. 2,000 x 1,000 mm) 1 x DN 100 outlet nozzle Underbody: 1 x swivel cone DN 450, ending in smooth flange DN 100 Notes: Otherwise as per pictures and drawing documentation Drawing

Condition: new, empty load weight: 328 kg, maximum load weight: 672 kg, overall weight: 1,000 kg, loading space length: 2,020 mm, loading space width: 1,070 mm, loading space height: 1,060 mm, loading space volume: 2.4 m³, color: silver, construction height: 1,650 mm, working width: 1,520 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, 100km/h approval / reinforced railing / reinforced mudguards, * IMMEDIATELY AVAILABLE * incl. 100km/h approval / Reinforced railing / Off-road tires / Reinforced mudguards Technical data: - Make: TPV Trailers - Model: KT-EB2 Plus - Vehicle type: Cover trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 202 x 107 x 106 cm - External dimensions (L x W x H): 308 x 152 x 165 cm - Loading height of floor: 50 cm - Perm. Total weight: 1,000 kg - Unladen weight: 328 kg - Payload: 672 kg - Chassis: Low loader (wheels next to the body) - Tires: 145/80R13 - Chassis: KNOTT rubber suspension - Support wheel: Yes - 100km/h approval: Yes EQUIPMENT: - Brake: Yes - Number of axles: 1 - Floor: Wooden floor - Drop sides: Sheet steel, single-walled - Drop side height: 72 cm - Drop sides foldable: No - Drop side hinges: 2 at the rear, riveted - Drop side heights:0 - Locks:Eccentric locks - Railing: Yes - Number of pallet spaces: 1 - Lid: Yes - Lid stop side: front - Lid load:approx. 75 kg - Rear opening with closed lid: Yes - Bicycle carrier/carrier: Yes Frame/chassis: Welded steel frame - Galvanization: Galvanized - Drawbar: V-drawbar, bolted, U-profile - Drawbar length: 90 cm - Mudguards: Plastic mudguards - Rear doors / tailgate: Rear doors - Load ramps: - - Drive-on angle: - - Supports:Yes - Rear lighting:Incandescent bulbs, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents:ZBII & COC papers DESCRIPTION: - Side walls made of 1.5 mm sheet steel with aluminium zinc coating - with 1x side wall elevation - continuous side members (3 pieces) - screen-printed wooden floor, 9 mm continuous without joint, slip-resistant and waterproof - eccentric locks for the rear door and lid - galvanized V-drawbar - plastic mudguards - lid made of steel KTL and black powder-coated, 56 mm high with roof rails, splash-proof - load capacity lid: 20 kg open / 75 kg closed - 4 lashing handles mounted inside on the floor - maintenance-free rubber spring axle from KNOTT - wheel shock absorbers mounted - 100 km/h manufacturer's approval - 2x rear supports mounted - support wheel with clamp mounted - 13-pin plug - large-dimensioned safety lighting plug - large safety lighting - integrated rear fog light - lighting recessed in rear frame New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Lrjdpfeu N Ni Esx Ahzsg

Condition: new, empty load weight: 270 kg, maximum load weight: 1,030 kg, overall weight: 1,300 kg, loading space length: 2,510 mm, loading space width: 1,310 mm, loading space height: 400 mm, loading space volume: 1.3 m³, color: silver, construction height: 970 mm, working width: 1,850 mm, Hydraulics, Automatic reverse drive, Hot-dip galvanized, Unbraked, Folding front wall, Off-road tyres, Railing, Aluminium drop sides, * IMMEDIATELY AVAILABLE * Incl. folding front wall, off-road tires, railing, aluminium drop sides TECHNICAL DATA - Make: Humbaur - Model: HA 132513 KV Offroad - Vehicle type: Box trailer - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (L x W x H): 251 x 131 x 40 cm - External dimensions (L x W x H): 379 x 185 x 97 cm - Loading height of floor: 55 cm - Perm. Total weight: 1,300 kg - Unladen weight: 270 kg - Payload: 1,030 kg - Chassis: Low loader (wheels next to the body) - Tires: 185R14C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted EQUIPMENT - Brakes: Yes - Number of axles: 1 - Floor: Wooden floor - Drop sides: double-walled anodized aluminium - Drop side height: 40 cm - Drop sides foldable: front + rear - Removable drop sides: Rear dropside - Dropside hinges: 2 at rear, riveted - Locks: Long lever locks, internal - Railing: Yes - Can be stored on edge : No - Number of pallet spaces: 3 - Tipping / lowering function: Without - Hydraulic pump: - - Overrun device/brake: ALKO - Frame/chassis: Steel side member, bolted - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, U-profile - Drawbar length: 120 cm - Folding drawbar: No - Mudguards: Plastic mudguards - Superstructures / attachments: Optional, attachable - Ramp shaft: No - Ramps/ramp flap: Optional - Ramp type: - - Ramp load: - - Drive-on angle: - - Supports: Optional, retrofittable - Lashing eyes: 6 - Rear lighting: bulbs, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC papers DESCRIPTION - Anodized double-walled aluminium drop sides - Screen-printed wooden floor, continuous without joint, slip-resistant and waterproof - Rear drop side foldable - Front drop side foldable - Long lever locks flush with drop side - Continuous side members - Frame compl. hot-dip galvanized - V-drawbar - plastic mudguards - insertion option at all 4 corners for tarpaulin frames, lattice attachment, dropside attachments or front wall elevation - 6 lashing brackets inside the side edge (certified 400kg/dAN) - maintenance-free rubber spring axle from ALKO - automatic reverse drive - ALKO overrun device and parking brake - 13-pin plug - return driving licence - parking brake - parking brake - parking brake. plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in the rear frame - support wheel with clampAccessories can be retrofitted - please enquire: - Rear supports - High front grille - High tarpaulin - Side wall attachment - Corrugated grille attachment 60cm - Spare wheel - Storage box - Rear supports - Ramps - Flat tarpaulin - Additional lashing eyes - Slot-hole rails for tension belts & locking beams - Rod strip with rubber coating for tension belts & locking beams - Reversing lights - Lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - Lrjdpfx Aou Htw Ushzeg

Condition: new, empty load weight: 268 kg, maximum load weight: 482 kg, overall weight: 750 kg, loading space length: 2,020 mm, loading space width: 1,070 mm, loading space height: 1,060 mm, loading space volume: 2.4 m³, color: silver, construction height: 1,660 mm, working width: 1,520 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, 100km/h approval / steel drop sides, * IMMEDIATELY AVAILABLE * incl. 100km/h approval / steel drop sides Technical data: - Make: TPV Trailers - Model: KT-EU2 Plus - Vehicle type: Cover trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 3 years from initial registration - Internal dimensions (L x W x H): 202 x 107 x 106 cm - External dimensions (L x W x H): 296 x 152 x 166 cm - Loading height of floor: 50 cm - Perm. Total weight: 750 kg - Unladen weight: 268 kg - Payload: 482 kg - Chassis: Low loader (wheels next to the body) - Tires: 145/80R13 - Chassis: KNOTT rubber spring axle - Support wheel: Yes - 100km/h approval: Yes EQUIPMENT: - Brake: No - Number of axles: 1 - Floor: Wooden floor - Drop sides: Sheet steel, single-walled - Drop side height: 106 cm - Drop sides foldable: No - Drop side hinges: 2 at the rear, riveted - Drop side elevations: 0 - Locks: Eccentric locks - Railing: Yes - Number of pallet spaces: 1 - Lid: Yes - Lid stop side: front - Lid load: approx. 75 kg - Rear opening with closed lid: Yes - Bicycle carrier / lid: Yes Frame/chassis: Welded sheet steel frame - Galvanization: Galvanized - Drawbar: V-drawbar, bolted, U-profile - Drawbar length: 90 cm - Mudguards: Plastic mudguards - Rear doors / tailgate: Rear doors - Load ramps: - - Drive-on angle: - - Supports: Yes - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC papers DESCRIPTION: - Side walls made of 1.5 mm sheet steel with aluminium zinc coating - with 1x side wall elevation - continuous side members (3 pieces) - screen-printed wooden floor, 9 mm continuous without joint, slip-resistant and waterproof - eccentric locks for the rear door and lid - galvanized V-drawbar - plastic mudguards - lid made of steel KTL and black powder-coated, 56 mm high with roof rails, splash-proof - load capacity lid: 20 kg open / 75 kg closed - 4 lashing handles mounted inside on the floor - maintenance-free rubber spring axle from KNOTT - 100 km/h manufacturer's approval - 2x rear supports mounted - support wheel with clamp mounted - 13-pin plug - large-dimensioned safety lighting plug - large safety lighting - integrated rear fog light - lighting recessed in rear frame New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Lodpfxsu N Nixs Ahzjrg

Condition: new, empty load weight: 341 kg, maximum load weight: 659 kg, overall weight: 1,000 kg, loading space length: 2,020 mm, loading space width: 1,070 mm, loading space height: 720 mm, loading space volume: 1.5 m³, color: silver, construction height: 1,390 mm, working width: 1,650 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, 100km/h approval / reinforced railing / off-road tyres / reinforced mudguards, * IMMEDIATELY AVAILABLE * incl. 100km/h approval / Reinforced railing / Offroad tires / Reinforced mudguards Technical data: - Make: TPV Trailers - Model: KT-EB2-Offroad - Vehicle type: Cover trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 202 x 107 x 72 cm - External dimensions (LxWxH): 308 x 165 x 139 cm - Loading height of floor: 50 cm - Perm. Total weight: 1,000 kg - Unladen weight: 341 kg - Payload: 659 kg - Chassis: Low loader (wheels next to the body) - Tires: 235/75R16 - Chassis: KNOTT rubber suspension - Support wheel: Yes - 100km/h approval: Yes EQUIPMENT: - Brake: Yes - Number of axles: 1 - Floor: Wooden floor - Drop sides: Sheet steel, single-walled - Drop side height: 72 cm - Drop sides foldable: No - Drop side hinges: 2 at the rear, riveted - Drop side elevations: 0 - Locks: Eccentric locks - Railing: Yes - Number of pallet spaces: 1 - Lid: Yes - Lid stop side: Front - Lid load: approx. 75 kg - Rear opening with closed lid: Yes - Bicycle carrier / lid: Yes - Rear opening with closed lid: No Frame/chassis: Sheet steel frame - Galvanization: galvanized - Drawbar: V-drawbar, bolted, U-profile - Drawbar length: 90 cm - Mudguards: Plastic mudguards - Rear doors / tailgate: Rear doors - Load ramps: - - Drive-on angle: - - Supports: Yes - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC documents DESCRIPTION: Single-axle box trailer with upward-opening and lockable splash-proof cover with railing. The reinforcement set consists of reinforced roof rails and stronger shock absorbers for the lid, which are additionally supported on the inside with a reinforcing plate. This increases the load capacity of the cover to 250 kg, so that you can easily fit bicycle racks, roof boxes or even roof tents. The off-road trailer is suitable for off-road use. The coarse-tread off-road tires give this trailer more ground clearance and the reinforced black painted mudguards can be walked on. This trailer has 1.5 mm thick side walls made of aluminum-zinc-coated sheet steel. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Lrsdpfxsu Hr Tns Ahzeg

Condition: excellent (used), MyRef MY-ZB26-TFD refrigeration unit MyRef MY-ZB26-TFD condensing unit suitable for refrigeration applications Typical applications are Freezer cabinets in supermarkets and minimarkets cold stores Beer cellars Milk cooling systems Standard equipment Copeland Scroll M compressor ZB series with sound insulation hood Oil sump heater Liquid receiver with burst protection Filter dryer Sight glass visible from outside Ball shut-off valves Component-tested combined HP/ND safety pressure switch Electrical equipment: IP 55 switch box, compressor contactor, DIN rail mounting Condenser is integrated and protected in the housing Condenser fins coated with epoxy resin phenol (gold paint*) High-quality housing: solid in 1.5 mm galvanized and powder-coated sheet steel, base plate and feet in 2 mm sheet steel Frame construction with individually removable panels; all screws and components can be accessed from the front with minimal effort Blind rivet nuts with carriage bolts for secure, durable fastening without rust problems Pressure-controlled speed regulator with EMC filter Space-saving installation of several units next to each other possible; required mounting distance 25 mm Type: MyRef -ZB26-TFD Copeland Scroll Condensing unit Type: MyRef -ZB26-TFD Built-in compressor type: ZB19-KQE-TFD-525 Sound pressure level: 39 dbA-10 m Collector volume: 6 liters Air volume: 4500m³/h Cooling capacity: 9 kW Voltage: 400V,3PH,50Hz Power consumption: 8.9 A Lredpfxsvtl T Do Ahzeg Dimensions: HxWxD 715 x 1120 x 450 mm Weight: 102 kg You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding Station 8 kVA Ljdpfsl Smn Sjx Ahzsrg Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Mains supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Heat current 100 %: 0,88 kA Year: 2014 Weight: 85 kg Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: Fabr. Nr. 281007 - 0125, total width: 900 mm, total length: 1,800 mm, total height: 1,250 mm, type of input current: three-phase, volume flow: 1,150 m³/h, nominal heat output: 90 kW (122.37 HP), Equipment: type plate available, We are selling our warm air heater with room thermostat, Kroll M 100, 90 kW, year of manufacture approx. 2000, age-appropriate good condition. Fully functional. Additionally, the following pipes and bends are available for purchase at an extra charge: - 7 pcs. spiral duct, diameter 355mm, length 2000mm - 1 pc. spiral duct, diameter 355mm, length 1000mm - 2 pcs. spiral duct, diameter 180mm, length 2000mm Lrjdsxv Akzopfx Ahzjg - 1 pc. Y-piece with gasket, 45°, length 800mm - 6 pcs. bend with gasket, diameter 355mm, 45° - 1 pc. bend with gasket, diameter 355mm, 90° - 1 pc. reducer, diameter 560/355mm, length 550mm - 8 pcs. sleeve, diameter 355mm - 4 pcs. connector with gasket, diameter 355mm The pipes have previously been installed and riveted.

Condition: new, functionality: fully functional, Year of construction: 2015, machine/vehicle number: WOLPD8EN4F80661454, Front spoiler Opel Astra 2.2l Turbo Diesel Vehicle ID No.: WOLPD8EN4F80661454 Year of manufacture: 2015 Part number Description Qty ZL13397839 081045/Rear bumper 1 Lsdot Sfuhjpfx Ahzerg ZL13370757 081045/Rear left reflector 1 ZL13370756 081045/Rear right reflector 1 ZL13368944 081045/Rear left bumper trim strip 1 ZL13368945 081045/Rear right bumper trim strip 1 ZL13368946 081045/Rear center bumper trim strip 1 ZL13368951 081045/Rear right guide rail 1 ZLYQ00159780 081045/MUL screw RLX RDL 6 ZLYQ00125980 081045/Removable rivet 2 ZL24449408 081045/Nut 4 ZL13358933 081045/Filler housing 1 Price: negotiable Collection only. Cash payment only.

Year of construction: 2018, condition: ready for operation (used), Various metalworking machines are available as remaining stock. 1/2/3) Three wobble riveting presses Thielicke GmbH & Co. KG WN6, year of manufacture: 1998. 4) Schlenker & Cie Atlas W4 high-speed planer, year of manufacture: 1961, weight: approx. 1700kg. 5) Spot welding machine J.u.W. Müller GmbH Opladen OMP67F, year of construction: 1960. 6) Ring welding machine Ing. G. Wenninger/BAPO KH III, year of construction: 1940s, conversion: 1964. 7) Cross-cut saw Berg & Schmid Mini Compact, year of construction: 2018. 8/9/10) Three presses. Including vices and lathe accessories. On-site inspection is possible. Individual sale possible. Ledpsu Tuvcjfx Ahzerg

Condition: used, TECHNICAL DETAILS - Parts per minute : 400 - Rivet length : 12 [mm] - Drilling depth (max.) : 5 [mm] - Cutting diameter : 3 [mm] - Floor space (width) : 1.12 [m] - Floor space (length) : 2.21 [m] - Height : 1.77 [m] - Motor : 4 [hp/kW] - Net weight : 2,500 [kg] - Gross weight : 3,000 [kg] EQUIPMENT - Tooling as per photo Lsdpfx Ahjuhb Tkjzsrg

Year of construction: 2011, condition: used, Toxi Press TOX-Clinch-unit TZ including EPMR-drive & electrical cabinet very good condition Robot tool Typ:  TZ 05.422289 weight: 121kg Max Kraft 52kN complete system Typ: STE 606-006-125 3,4kW 125 mm/s power 400V Press Typ: EPMR 055.034.100.000 including Schematic diagramm Lredpfxodq E Eis Ahzeg You get everything as shown. Including electrical cabinet. Attention: the cables to connect the clinch unit and the electrical cabinet are not included

Condition: as good as new (ex-display), Year of construction: 2023, Press-in machine with automatic feed via conveyor bowl Automatic feeds from above and below available. Touchscreen control with database for press-in pressure/fastener-dependent Thrust 450 mm Press-in force 56 kN Suitable for self-clinching fasteners up to M8/M10 Ljdpfx Ahjld Thrjzjrg