Used Robot Cell for sale (3,612)

Condition: ready for operation (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1.302.981, overall weight: 280 kg, load capacity: 20 kg, arm reach: 1,813 mm, controller model: KR C4 NA UL, No minimum price – guaranteed sale to the highest bidder! Gbodpfx Ae Aiu Tyeanow The offer includes only the robot without the enclosure! The enclosure can be purchased separately for an additional €3,500! TECHNICAL DETAILS Payload: 20 kg Reach: 1,813 mm MACHINE DETAILS Controller: KR C4 NA UL Total weight: 280 kg Operating hours: approx. 500 hours EQUIPMENT Teach pendant (manual control) Safety enclosure with Siemens PLC 2 × SICK laser scanners 4 × Light curtains

Condition: good (used), Year of construction: 2016, overall weight: 10,000 kg, Equipment: documentation/manual, For Sale: - Manufacturer: ABB / Stelram - Brand: ABB / Stelram - Type: 2 robot cells, each with 4 pick and place robots. Total: 8 robots - Vacuum: Becker pumps - Camera system / Vision system Included: - Power cabinet - Manuals, software, spare parts lists, introduction lists, pneumatic and electrical diagrams - Infeed conveyor - 2 robot cells - 2 camera boxes - Conveyor belts Dimensions, complete with infeed: Length x width x height: 19.50 meters x 2.70 meters x 2.95 meters Transport and dismantling can be provided by us. Gsdpfxjznd Skj Aanobw This large robot cell is suitable for high speeds and larger products. If you have any questions or comments, please feel free to contact us. Sincerely, Leo Holland

Condition: excellent (used), Year of construction: 2021, operating hours: 260 h, functionality: fully functional, machine/vehicle number: 1028586, overall weight: 55 kg, load capacity: 10 kg, arm reach: 1,100 mm, repeat accuracy: 0.02 mm, TECHNICAL DETAILS Gjdpfx Aas Ai Edlsnobw Number of axes: 6 Nominal load capacity: 10 kg Reach: max. 1,101 mm Pose repeatability (ISO 9283): ± 0.02 mm MACHINE DETAILS Controller: KUKA KRC5 Programming device: KUKA smartPAD Input voltage: 230 V Input current: 16 A Type of current: Alternating current (AC) Robot weight: 55 kg Operating hours: 260 h EQUIPMENT Connection cable Software KUKA.ready2_animate Software KUKA.RobotSensorInterface (RSI) Software KUKA.GripperSpotTech 5.0, installed on the controller

Condition: excellent (used), Year of construction: 2019, operating hours: 5,200 h, functionality: fully functional, machine/vehicle number: 379/2019, Equipment: KUKA KR 60 industrial robot (60 kg payload) with controller 2 professional polishing units with frequency-inverter speed control and automatic polishing paste dosing 1 professional single grinding station with frequency-inverter speed control 1 professional double grinding station with frequency-inverter speed control 2 automatic loading tables, allowing parts to be loaded while the robot is working, for continuous, uninterrupted operation Control cabinet with frequency inverters, PLC control and speed regulation for all stations Gsdpfx Aas Ah Edrjnebw Enclosure with safety fencing Key advantages: Complete, integrated and programmed system, no integrator, programming or commissioning required 4 processing stations in a single cell All polishing and grinding units are professional-grade with individual frequency-inverter speed control Ideal for series production of sanitary fittings, faucets, handles, fittings, castings and other metal components Can be inspected in operation

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, functionality: fully functional, clamping force: 132 kN, screw diameter: 135 mm, injection pressure: 1,390 bar, injection weight: 7,729 g, KraussMaffei KM 1300-12000 MX + KUKA Robot! TECHNICAL DETAILS Clamping Unit Clamping force: 1,300 t Opening stroke / mounting height: max. 2,300 mm Distance between tie bars: max. 4,000 mm Mold mounting height: min. 1,000 mm / max. 1,700 mm Tie bar height: max. 1,910 mm Mold size: min. 1,000–1,700 mm Clear tie bar spacing: 1,500 mm Nozzle radius: R40 mm Mold weight: 29,000 kg Gsdpfx As Ah D Dysanjbw Ejector stroke: 350 mm Injection Unit Screw diameter: 135 mm Displacement volume: 8,588 cm³ Injection pressure: 1,390 bar Shot weight: 7,729 g PS MACHINE DETAILS Core pulls, ejector side / nozzle side: 1 / 1 Pneumatic needle closures: 1 Operating hours: 81,000 h EQUIPMENT KUKA robot

Condition: like new (used), Year of construction: 2017, operating hours: 280 h, functionality: fully functional, machine/vehicle number: CR751, input voltage: 400 V, type of input current: three-phase, number of axes: 6, Equipment: documentation/manual, TECHNICAL DETAILS Number of axes: 6 MACHINE DETAILS Robot controller: Mitsubishi MELFA Input voltage: 400 V Type of current: Three-phase Operating hours: 280 h EQUIPMENT Original Mitsubishi robot controller Teach pendant / programming handheld device Software and programming equipment Robot connection cable and accessories Vacuum gripper Complete robot system Gjds Ahn Efspfx Aanobw Low operating hours, not used in continuous series production Documentation/manual

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 133504, MACHINE DETAILS Dimensions (L x W x H): approx. 9,000 x 6,000 x 2,800 mm Voltage: 400 V AC Frequency: 50 Hz Fuse rating: 1,700 A Rated current: 150 A Power supply system: TN-S Gjdpfx As Ah Em Noansbw Supply pressure: max. 10 bar Operating pressure: 6 bar Compressed air connection: G ½ inch Compressed air quality: ISO 8573-1, cleaned and oil-free Ambient temperature: 10–45 °C Relative humidity: 20–80 % (without condensation) Noise level: < 78 dB(A) EQUIPMENT Suitable for operating environments with low dust and dirt levels, as well as oil vapors and humidity. Note: Further technical details can be found in the attached documents.

Condition: good (used), Year of construction: 2020, functionality: fully functional, total length: 9,000 mm, Adhesive application cell with ABB robot IRB 4600-60/2.05. Gedpfszz Agmex Aanobw Included in the adhesive application cell: Robot (weight 425 kg, payload 60 kg, year of manufacture 2020) 7th axis + steel structure (unlike in the images, the axis and steel structure have been extended to approximately 9 m) Adhesive application units Protective fences, etc. Not included: Roller shutter doors Fixturing device (available separately) Detailed drawings available upon request.

Condition: used, ABB 2-Station Welding Robot Cell You are bidding on a professional, fully functional 2-station robot welding cell for continuous industrial use. This system is ideal for automated and highly efficient MIG/MAG welding of small to large series (e.g., in the automotive or machine construction industry). Thanks to the clever two-station principle (shuttle table/parallel stations), the operator can safely load new parts or remove finished workpieces on one side while the robot productively welds on the other side. System Components: 1. Industrial Robot & Controller (ABB): - Robot controller: Reliable and robust ABB S4 / S4C generation - Programming hand-held device: Original ABB Teach Pendant with joystick for precise teaching of welding paths. - Additional axes: Both stations have synchronized, motorized rotary axes (nameplate: ABB / ELMO, type: PS 60/4-50-P-LSS-3985) for optimal positioning of the workpiece in the immersion process. 2. Welding Technology (Carl Cloos Welding Technology GmbH): - Welding power source: Cloos GLC 503 QUINTO (Powerful 500A MIG/MAG system) - Cooling: Integrated liquid cooling (water cooling) for maximum duty cycle of the welding torch. - Accessories: 2x professional WDI ECORACK large container wire spools on rolling frames, including robust wire guide hoses to the robot. 3. System Control & Safety: - Control unit (HMI): Modernized Siemens SIMATIC HMI touch panel for easy control of the entire system, piece count control, and error analysis. - Safety: Complete, enclosed protective cabin (transparent walls for protection against UV radiation and welding spatter) including an integrated extraction system (hose package on the robot arm). - Inspection: The system was in industrial use until recently (including certification for well-known automotive suppliers) and has a valid DGUV-V3 inspection sticker. "Everything from one source: We would be happy to offer you a suitable bank financing option for your project." Gjdeztkb Nopfx Aansbw More items - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2020, operating hours: 400 h, overall weight: 34 kg, This 6-axis Universal Robots UR10e cell was manufactured in 2020. It features a load capacity of 10 kg and a range of 1300 mm. Weighing 33.5 kg, this robot arm is designed for tasks requiring precision and flexibility. Consider the opportunity to buy this Universal Robots UR10e cell. Contact us for more information. Gbedpfox Tkbfex Aanjw • Axes: 6 • Load capacity: 10kg • Range: 1300mm • Repeat accuracy: +/- 0.05mm • Rotation: 6-axis

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 12 kg, arm reach: 1,441 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.02 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Gbodo Af Iiwepfx Aanow Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-12D is based on Fanuc M-10iD/12 robot arm suitable for middle size machines and specifically adapted for handling vices. It consists of: 1) Robot: - Fanuc robot M-10iD/12 6-axis vertical robot Load capacity 12 kg / reach 1441mm R-30iB Plus controller A-cabinet I/O modules; DI16 / DO16 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Drawer palletizing system: Usable space per one drawer: 1000 x 480mm Max 5 drawers (depends on the height of the pieces) Load capacity of one drawer: 250 kg Reer safety light curtain, cat.4 Drawer opening possible from both sides LED status beacon Electrical cabinet and cables 3) Safety Options The Cage is our standard solution. All URC cells can also be delivered in the "Laser" version, which is designed for optimal accessibility. The price of the cells remains the same regardless of the chosen version. - Cage (Standard) - Omron Laser (Alternative) - Reer Light Curtain (Standard) 4) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC, I/O, M-fin, safety Preparing for a Clamping device (2nd clamping device available) Preparing for a PAD Preparing for an external Air Blow 5) Gripper Configuration The Teximp Gripper Interface includes everything needed for clamping parts on the robot side. - Gripper carrier 90° Schunk Gripper JGP-P 100-2 (2 pcs) Stroke per jaw [mm] = 5 Recommended workpiece weight [kg] = 8.75 ABR-PGZN-plus 100 blanks made of aluminum for rework by the customer Sensors G1/G2 - clamped/unclamped Blower nozzle Other possibility: - Gripper carrier 180° Schunk Gripper JGZ 100-1 (2 pcs) Stroke per jaw [mm] = 10 Recommended workpiece weight [kg] = 9 Sensors G1/G2 - clamped/unclamped (4 pcs) Blower nozzle 6) Automatic Door system Our robot cell includes an Auto Door for any Haas machine, with two available solutions: the original Haas Smart CAN DC Auto Door for machines built in 2020 and later, or Teximp’s Pneumatic Auto Door for older machines. PAD-HaasVF-side PAD-HaasVF-front PAD-HaasMM-front PAD-HaasST PAD-HaasUMC - PADs for machines without the original side door/window are also available. 7) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Operators can easily adjust jobs for different products/parts and then save them as "Recipes", enabling a complete robot setup change with just one click on the screen. This simplifies the programming process and minimizes downtime. - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Year of construction: 2021, condition: used, An automated robotic welding cell including a Fronius TPS 320i welding power source, robot arm, welding table and protective enclosure is offered for sale. Inspection possible by arrangement. Gbsds Aih D Ispfx Aanjw

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 35 kg, arm reach: 1,831 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.03 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-35P is based on Fanuc M-20iD/35 robot arm adapted for handling pallets or vises. It consists of: 1) Robot: Fanuc robot M20iD/35 6-axis vertical robot Load capacity 35 kg / reach 1831mm R-30iB Plus controller A-cabinet Gbodpfx Ao Af Uxxsanow I/O modules; DI32 / DO32 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Loader Table: Compact but heavy loader table with front entrance. Table size: 980 x 700 mm Docking station with four pockets Three locating pins for quick pallet exchange ReeR safety light curtain, Cat. 4 Three control buttons LED status beacon Electrical cabinet and cables included 3) Pallet Rack The URC-35 Palletizing cell can be equipped with 1 or 2 large-capacity racks with 42 pockets. Large rack (42 pockets) - included as standard Second large rack (42 pockets) - optional 4) Vices & Zero-point clamping system The system is designed for: - Lang Vices (not included in price) - Lang Zero-Point clamping system (not included in price) - Note: it can also be implemented to work with pallets instead of vices (not included in price) 5) Safety Options: Cage (standard) ReeR safety light curtains (cat.4) on Loader table (standard) Plexiglass cover on Racks (standard) ReeR Mosaic M1 safety controller (standard) 6) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC (I/O, safety, program call -> all via Ethernet cable communication) Preparing for a Clamping device Preparing for a PAD Preparing for an external Air Blow 7) Gripper Configuration The Teximp Gripper Interface includes everything needed for gripping the vices Gripper carrier Schunk Gripper JGP-P 160-2 Stroke per jaw [mm] = 8 Recommended workpiece weight [kg] = 24.5 Preparation for vice/pallet clamping Sensors for gripper state detection - clamped/unclamped Blower nozzle Laser sensor (for vise presence detection) 8) Automatic Door system URC-35 Palletizing can be equipped with a pneumatic auto door (PAD) for selected Haas machines. Available PAD models include: a) PAD-HaasUMC-side b) PAD-HaasVF-side c) Can be made for other machines (not included in price) 9) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Important Note: Operators can easily assign different .nc machining program to each Vise via HMI, robot calls assigned program on CNC machine by scanning QR code on each vise! - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Year of construction: 2023, operating hours: 300 h, condition: excellent (used), functionality: fully functional, This robotic cell is used for tending an injection molding machine for insert molding. Gbodpsz N Iq Esfx Aanjw

Condition: used, Year of construction: 1988, functionality: limited functionality, total width: 5,500 mm, total length: 5,500 mm, We are offering this used Yaskawa Yasnac RX ENCM - RP618 welding cell with welding robot and rotary table, manufactured in 1988. Manufacturer: Yaskawa Model: Yasnac RX ENCM - RP618 Year of manufacture: 1988 Condition: Used Machine type: Welding cell with welding robot and rotary table Rotary table: Motoman Type YRFL-NND10G Data: Year: 1988 Weight: approx. 2200 kg Axis dimensions: 1400 mm x 600 mm Footprint: 5500 mm x 5500 mm Programming documentation not available Gbjdpfe Aifrhsx Aanew PLC control with occasional error message (pressing the PLC control resolves the error) Included: Robot Rotary table Control cabinet Robot controller Pictured drip tray Pictured floor mat Light curtains Not included: Welding machine Extraction system Partition walls (right / left) Availability: Upon request IMPORTANT!!! Dismantling and transport will be carried out by the buyer. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Year of production: 2014 Lifting capacity: 20kg Gbjdjr Aka Aopfx Aanew Reach: 1726mm

Year of construction: 2021, condition: used, An automated cobot welding cell is offered for sale. SPACE A: Workspace X/Y/Z: 2300mm/875mm/1300mm. Maximum load: 3000kg. SPACE A1/A2: Workspaces X/Y/Z: 1050mm/875mm/1100mm. Maximum load: 1500kg. SPACE B: Workspace X/Y/Z: 2300mm/1200mm/2150mm. Maximum manipulator payload: 500kg. Manipulator torque: 1000Nm. Equipped with an extension set, a two-axis manipulator, a Fronius TPS/i 400A welding system prepared for CMT and a torch cleaning station. Inspection possible by arrangement. Gbedpo Aih D Sefx Aanow

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 12 kg, arm reach: 1,441 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.02 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-12 is based on Fanuc M-10iD/12 robot arm suitable for middle size machines. It consists of: 1) Robot: - Fanuc robot M-10iD/12 6-axis vertical robot Load capacity 12 kg / reach 1441mm R-30iB Plus controller A-cabinet I/O modules; DI16 / DO16 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Part Table: Compact but heavy part table with front entrance. Table size 980 x 700mm Three pins for quick pallet changing Reer safety light curtain, cat.4 Control button 3 Gode Afx Ryspfx Aanobw LED status beacon Electrical cabinet and cables 3) Safety Options The Cage is our standard solution. All URC cells can also be delivered in the "Laser" version, which is designed for optimal accessibility. The price of the cells remains the same regardless of the chosen version. - Cage (Standard) - Omron Laser (Alternative) - Reer Light Curtain (Standard) 4) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC, I/O, M-fin, safety Preparing for a Clamping device (2nd clamping device available) Preparing for a PAD Preparing for an external Air Blow 5) Gripper Configuration The Teximp Gripper Interface includes everything needed for clamping parts on the robot side. - Gripper carrier 90° Schunk Gripper JGP-P 100-2 (2 pcs) Stroke per jaw [mm] = 5 Recommended workpiece weight [kg] = 8.75 ABR-PGZN-plus 100 blanks made of aluminum for rework by the customer Sensors G1/G2 - clamped/unclamped Blower nozzle Other possibility: - Gripper carrier 180° Schunk Gripper JGZ 100-1 (2 pcs) Stroke per jaw [mm] = 10 Recommended workpiece weight [kg] = 9 Sensors G1/G2 - clamped/unclamped (4 pcs) Blower nozzle 6) Automatic Door system Our robot cell includes an Auto Door for any Haas machine, with two available solutions: the original Haas Smart CAN DC Auto Door for machines built in 2020 and later, or Teximp’s Pneumatic Auto Door for older machines. PAD-HaasVF-side PAD-HaasVF-front PAD-HaasMM-front PAD-HaasST PAD-HaasUMC - PADs for machines without the original side door/window are also available. 7) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Operators can easily adjust jobs for different products/parts and then save them as "Recipes", enabling a complete robot setup change with just one click on the screen. This simplifies the programming process and minimizes downtime. - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, We are offering a complete, integrated robotic CNC turning cell consisting of two DOOSAN vertical CNC turning centers and one KAWASAKI ZX-165U industrial robot. The machines and robot are exceptionally well preserved, regularly maintained and currently operating in our production facility in a two-shift environment. The robotic cell enables automated workpiece handling, loading and unloading between the CNC machines. This is an opportunity to acquire an existing production automation system rather than sourcing individual machines and commissioning a new integration. 1. Complete cell – Included equipment • 1 × DOOSAN VT450TM-2SP CNC turning center • 1 × DOOSAN VT750TM-2SP CNC turning center • 1 × KAWASAKI ZX-165U industrial robot and robot control cabinet • Installed robot gripper / workpiece handling equipment • Safety fencing and protective enclosure • Robot-to-machine communication interfaces • Associated electrical and pneumatic automation components • Workpiece handling / storage stations and chip conveyors 2. Condition, inspection and advantages Both CNC machines and the Kawasaki robot are fully operational, regularly maintained and currently used in our manufacturing facility in Slovenia. The complete cell can be inspected under power and demonstrated during production by prior appointment. • Complete, existing robotic CNC turning solution • Two heavy-duty Doosan vertical turning centers with FANUC CNC controls • Driven tools and C-axis on both machines • Automated workpiece handling and reduced manual intervention • Excellent condition; regularly maintained Gedpfx Aaez Rqqqsnjbw • Live inspection and test run available 3. Typical applications Automated machining of flanges, bearing rings, gear components, housings, brake discs, large rotational components and other medium- to heavy-duty industrial workpieces, including steel and cast-iron parts. 4. Sales information The complete robotic cell is offered for sale as one integrated system. Additional photographs, video and technical information are available upon request. Inspection and test run by appointment

Condition: used, Bosch Scara SR 800 robot with controller + cell, pivoting arm robot with gripper. You are purchasing a functional Bosch Scara SR 800 robot with controller and a complete cell. Upon request, we can also ship only the robot without the cell. Everything is in working order and has been regularly maintained. Gbodeyfhn Sjpfx Aanew You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 10 kg, arm reach: 1,101 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (Mate Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: AC, repeat accuracy: 0.01 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-10S is based on Fanuc LR-10iA/10 suitable for smaller machines. It consists of: 1) Robot: - Fanuc robot LR-10iA/10 6-axis vertical robot Load capacity 10 kg / reach 1101mm Mate cabinet I/O modules; DI16 / DO16 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Part Table: Compact but heavy part table with front entrance. Table size 980 x 700mm Three pins for quick pallet changing Reer safety light curtain, cat.4 Control button 3 LED status beacon Electrical cabinet and cables 3) Safety Options The Cage is our standard solution. All URC cells can also be delivered in the "Laser" version, which is designed for optimal accessibility. The price of the cells remains the same regardless of the chosen version. Gedpfx As Abq Sbsanjbw - Cage (Standard) - Omron Laser (Alternative) - Reer Light Curtain (Standard) 4) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC, I/O, M-fin, safety Preparing for a Clamping device (2nd clamping device available) Preparing for a PAD Preparing for an external Air Blow 5) Gripper Configuration The Teximp Gripper Interface includes everything needed for clamping parts on the robot side. - Gripper carrier 90° Schunk Gripper JGP-P 100-2 (2 pcs) Stroke per jaw [mm] = 5 Recommended workpiece weight [kg] = 8.75 ABR-PGZN-plus 100 blanks made of aluminum for rework by the customer Sensors G1/G2 - clamped/unclamped Blower nozzle Other possibility: - Gripper carrier 180° Schunk Gripper JGZ 100-1 (2 pcs) Stroke per jaw [mm] = 10 Recommended workpiece weight [kg] = 9 Sensors G1/G2 - clamped/unclamped (4 pcs) Blower nozzle 6) Automatic Door system Our robot cell includes an Auto Door for any Haas machine, with two available solutions: the original Haas Smart CAN DC Auto Door for machines built in 2020 and later, or Teximp’s Pneumatic Auto Door for older machines. PAD-HaasVF-side PAD-HaasVF-front PAD-HaasMM-front PAD-HaasST PAD-HaasUMC - PADs for machines without the original side door/window are also available. 7) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Operators can easily adjust jobs for different products/parts and then save them as "Recipes", enabling a complete robot setup change with just one click on the screen. This simplifies the programming process and minimizes downtime. - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Condition: used, Year of construction: 2022, operating hours: 1,100 h, functionality: fully functional, load capacity: 2,000 kg, arm reach: 2,400 mm, Equipment: documentation/manual, For sale is a like-new IGM RTE 478-S welding robot, manufactured in 2022! This is a 7-axis robot with a 9-meter travel range and two stations, each equipped with a 2-axis L-manipulator with a load capacity of up to 2000 kg. Robot type: RTE 478-S in a suspended position. Control system: Fully digital PC robot control system, type RCE. Welding process: Single-wire welding process. Welding equipment: Digital inverter welding power source TPS 500i. The system can be inspected and tested upon request. The robot was operated in a single-shift operation and has few operating hours! Godpfx Aae Ad R Eaonsbw

Condition: ready for operation (used), Year of construction: 2017, A robot automation cell WU Mechanische Werkstätte with a Fanuc robot for product handling for a lathe is available. Gripper system: double gripper, gripper manufacturer: Schunk, robot type: Fanuc M20iA 35M, robot axes: 6, max. payload: 35kg, robot reach: 1810mm, machine dimensions X/Y/Z: approx. 1700mm/1300mm/2200mm, weight: approx. 2000kg. Lathe power-on time: approx. 34000h, servo-on time (cell): 5700h, mechanical operating hours: 615h. This is only the automation. Documentation available. An on-site inspection is possible. Gjdpfoxbhhcsx Aanebw

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Gbsdpowypqlefx Aanow Weight (controller with control cabinet): 300 kg Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Gbodpfewc A Rdox Aanjw