Used Rondamat for sale (24)

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Gsdpoq Dzi Tefx Aqioka Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: used, Year of construction: 1998, total height: 1,500 mm, total length: 1,200 mm, total width: 110 mm, Colour: Cream Empty weight: 750 kg Price: On request - Year: 1998 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 84915 - Control: Conventional - Transport dimensions: 1200mm x 110mm x 1500mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gkodpfxszry Ivj Aqija Lukas van Rossum

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 108076, grinding wheel diameter: 40 mm, overall weight: 550 kg, Used Weinig Rondamat 960 Includes various grinding discs Shaft diameter 40mm Gkodpeztzrxjfx Aqioa

Condition: used, Grinding disc for the Weinig Rondamat or similar sharpening machines Technical data: - Manufacturer’s No.: 930 Condition: As new - Grit size: D 151 Godezry A Hepfx Aqijka - Diameter: 200 mm

Condition: used, Grinding disc for the Weinig Rondamat or similar sharpening machines Technical data: Godszry Ayepfx Aqieka - Manufacturer’s No.: 920 Condition: As new - Grit size: D 126 - Diameter: 150 mm

Condition: used, Weinig Rondamat 929 knife grinding machine for the manufacture of profiled knives. Production from a straight blank or regrinding of used knives using a template. Gksdpszrx Hqefx Aqioa Technical data: - Maximum grinding wheel diameter: 225 mm - Maximum tool diameter: 300 mm - Minimum tool diameter: 80 mm - Maximum tool width: 230 mm

Condition: used, New decorative film (manufactured in 2019) Control panel 23 001 0078 Ident No. 10017781 / 912053002 Gsdpezrxnhofx Aqioka Used original circuit board, cleaned and tested Used original aluminium support plate Cables available on request

Condition: used, Year of construction: 2004, total height: 1,600 mm, total length: 1,250 mm, total width: 1,400 mm, Colour: Grey Empty weight: 900 kg Price: On request Gedpfxeyr Rnzo Aqijka - Details: - └ Description: Bad bearings - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102850 - Motor power: 1.0kW - Transport dimensions: 1250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, grinding width: 240 mm, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Gkedpfeufcnqjx Aqiea Tool length 240 mm Main cutting edges up to 25° Motor 1, 1 kW

Condition: used, Sharpening machine for profile cutters and straight grinders. . Grinding interlocked in 2 axes. Very easy to operate. Width of the tool max: 360mm Maximum cutting circle 350mm profile 300mm straight Minimum cutting circle 70mm Godpfsnzkx Sox Aqieka Main motor power kW: 1.5 at 3000 rpm at 50 Hz. Wet grinding: Yes

Condition: used, Year of construction: 1999, 50MM GRINDING ARBOR 300 MM MAX. GRINDING LENGTH 330 MM MAX. TOOL DIAMETER GRINDING MOTOR 1,1 KW FEEDMOTOR 0,045 KW COOLING PUMP 0,08 KW DEVIDING DISK FOR AUTOMATIC HEAD ROTATION DIMENSIONS ARPR. 1,40 X 0.9 X 1,40 M WEIGHT APPR. 375 KG Gjdpfx Aqjztv Nrsiska

Condition: used, Year of construction: 2008, machine/vehicle number: 112051, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, Weinig Rondamat 960 Powerlock (automatic straight knife grinder and profiling grinder) The specifications are as follows: Weinig Rondamat 960 Powerlock / HSK profiling grinder. High-precision knife grinder for sharpening straight knives and profiling using a template. Sharpening of straight knives in a cutter block. Hand-held grinder for profiling and straight grinding. Abrasive wheel diameter min./max.: 150 mm / 225 mm Gsdpjzg Ut Njfx Aqieka Abrasive wheel width: ceramic 5 mm, borazon 10 mm Abrasive wheel bore: 60 mm Tool circumference min./max.: 100 mm / 300 mm Tool width max.: 240 mm Abrasive wheel drive: 1.1 kW Spindle speed: 1700/2000/2400/3000 rpm Clearance angle: Radial: (rear) 10 - 30 degrees, Axial: 0 - 20 degrees For rotating heads up to 60 degrees Coolant tank approx. 50 liters Table feed: 0 - 240 mm Electrical connection approx. 2 kW POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick-change system. Radial table mounting with precise adjustment. Max. tool width 240 mm.

Condition: used, functionality: fully functional, Weinig Rondamat 960 PowerLock cutterhead grinding machine Max. tool width: 240 mm Grinding wheel diameter: 150 – 225 mm Spindle speed, adjustable via frequency inverter: 1500 – 3000 rpm Angle adjustment – radial on the knife back: 10 – 30° Lateral adjustment in manual mode: 0 – 20° PowerLock tool clamping system This precision knife grinding machine is designed for: – Sharpening and manufacturing profiled knives from solid material according to a template – Re-sharpening straight planing knives in a cutterhead Godozhbrujpfx Aqiska

Condition: good (used), Year of construction: 2001, For inquiries: Zoltán Utasi Plus 36 30 205 7380 Grinding of planer knives (conventional and hydro tools, as well as profile knives – profile knives ground based on templates) Machining length: 240 mm Tool diameter: 100–230 mm Grinding wheel diameter: 150–225 mm Grinding wheel width: 2–3–4–10 mm Relief angle: 15–35° Side angle: 0–10° Coolant tank: 50 L Total electrical power: 2 kW Spindle diameter: D40 and D50 mm Infinitely variable speed control for grinding wheel: 1000–3000 rpm Godpfx Aqey Nmuyoiska Accuracy: within 0.005 mm Motorized lateral feed Liquid-cooled system Equipped with profile copying unit Accessories included (grease pump, knife holder, grinding wheel, dressing tool with tracing pin, template holder) This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: excellent (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 10002045, Weinig Rondamat from 2020, in very good condition. Gksdszi D Iujpfx Aqiea

Condition: excellent (used), WEINIG Rondamat 909, S/N 93362, Year 2001 – Ref. No. 119131 WEINIG Rondamat R 909, Machine for the automatic sharpening of straight knives in planing heads • Automatic indexing • Planer head diameter min. 85 mm to max. 225 mm • Max. tool length 330 mm (table stroke 440 mm) • Unlimited number of cutting edges • Continuously adjustable clearance angle 15° – 35° • Grinding spindle speed n=4,000 rpm • Grinding wheel D=125 mm, bore d=20 mm Gkedpswvql Nefx Aqioa • Grinding motor 1.1 kW, n=2,850 rpm • Feeding motor 0.053 kW, n=1,300 rpm • Grinding feed rate 650 mm/min • Indexing motor 0.033 kW, n=1.00 rpm • Freely selectable grinding passes per tool 1 – 5 • Coolant pump motor 0.065 kW, n=2,900 rpm • Coolant / tank capacity approx. 115 liters • Mounting arbor D=50 x 330 mm • Machine complete with accessories Machine dimensions • Width 1,150 mm • Depth 820 mm • Height 1,200 mm • Weight 450 kg Condition: 100% function tested = AS NEW condition Price: On request Payment: Prior to handover/loading Inspection: At any time by prior arrangement Subject to error and prior sale

Condition: excellent (used), Year of construction: 2004, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification as follows Weinig Rondamat 960 Powerlock / HSK profile grinder. High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. POWER LOCK SYSTEM option For grinding powerlock tools. Gksdpfxjw Np Uue Aqija Tool holder with manual HSK quick clamping system. Radial table clamping with fine adjustment Max tool width 240mm Max COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: used, Stehle HK 630 (semi-automatic straight knife grinder). Specification: • Maximum tool width 630 mm !!! • Tool diameter planer heads (min-max knife heads) 120 - 340 mm • Grinding wheel spindle speed 2850 rpm • Grinding wheel drive 1,1 kW • Clearance angle 10 - 35° • Coolant tank 28 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Gedpsv T Rkhefx Aqieka Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: used, Year of construction: 1982, I have a Weinig Rondamat 930 tool grinder, manufactured by the German company Weinig, for sale. The machine is in full working order. The stated price is for export in Poland, plus 23% VAT. Gedpjzhipbsfx Aqieka Transportation is the responsibility of the buyer.

Condition: ready for operation (used), Year of construction: 2004, Features: Rondamat 168 is extremely easy to use and highly versatile. The machine sharpens planing knives, milling tools, and circular saw blades using straight grinding wheels. Gsdpfxoh Txfdo Aqieka Shaft diameter: 40 mm Wet grinding Maximum tool diameter: 350 mm Disc diameter: 150 mm Maximum tool length: 240 mm Minimum tooth pitch: 32 mm Maximum tooth pitch: 20 mm Main motor power: 1.1 kW Total power consumption: 1.5 kW

Condition: excellent (used), Rondamat R 934, year 1997, in very good condition. Gkodpfx Asxiv S Eoqija

Condition: excellent (used), Year of construction: 2013, Weinig Powermat 600 automatic profiling planer, net price €68,800 Technical specifications: Year of manufacture: 2013 Working width (with a cutting circle of 93 - 125 mm): 20 - 230 mm Working height (with a cutting circle of 93 - 125 mm): 10 - 120 mm 7 spindles First lower horizontal spindle, 5.5 kW (7.5 HP) motor First right vertical spindle, shared motor with the left vertical spindle, 11 kW (15 HP) First left vertical spindle, shared motor with the 1st right vertical spindle Second right vertical spindle, 5.5 kW (7.5 HP) motor First upper horizontal spindle, 7.5 kW (10 HP) motor Second upper horizontal spindle, 7.5 kW (10 HP) motor Second lower horizontal spindle, 5.5 kW (7.5 HP) motor Electronic feed with brake, steplessly adjustable 5 - 30 m/min. 4 kW (5.5 HP) motor Operating voltage: 400 V (voltage range 380 - 420 V), 50 Hz All spindle motors are IE2 rated. All spindles have high rotational accuracy. Basic equipment for PowerLock. Surfacing table length 2 m (including a longitudinal guide) Marathon Coating for the machine table and fences Special coating for protecting table segments and fences against excessive wear. Recommended for processing abrasive materials (e.g. tropical wood, MDF, chipboard). OPTION TO PURCHASE THE FOLLOWING MACHINES AT SEPARATE PRICES: Gsdpfoytd S Njx Aqiska 1. Weinig Rondamat 960 Powerlock (automatic straight knife and profile grinder), net price €13,500 Specifications: Weinig Rondamat 960 Powerlock / HSK profile grinder. High-precision knife grinder for sharpening straight knives and profiling with a template. Sharpening straight knives in the cutting block. Manual grinder for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: ceramic 5 mm, borazon 10 mm Grinding wheel bore: 60 mm Tool circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1.1 kW Spindle speed: 1700/2000/2400/3000 rpm Clearance angle: Radial: (rear) 10 - 30 degrees, Axial: 0 - 20 degrees For rotary heads up to 60 degrees Coolant tank approx. 50 liters Table feed 0 - 240 mm Electrical connection approx. 2 kW POWER LOCK SYSTEM option For grinding Powerlock tools. Tool holder with manual quick-change HSK system. Radial table mounting with precise adjustment, max. tool width 240 mm. 2. WEINIG OptiControl 970095 tool measuring station, net price €7,650 Specifications: Tool diameter min. 90 Tool diameter max. 300 mm Tool length 0 - 240 mm Radial measuring range (radius): 150 mm Non-contact measurement of tool dimensions, radius (R) and height (H) and display on electronic digital displays. Electronic digital displays indicating tool radius and height. HSK63 tool holder for PowerLock tools NEW PowerLock adapter HSK63, shank D=50 x 260 mm 3. Weinig Template maker Isel 3020 template milling machine, net price €1,700 Application: Profiling milling Creating templates for tools used for further processing on the machine, e.g. Weinig Rondamat 4. POWERLOCK MOUNTED CUTTING HEADS, price €7,500 Two cabinets full of cutting heads for various applications, approximately 45 pieces.

Condition: used, functionality: fully functional, For sale is a working sharpening machine /Rondamat 940 (model -R 934) with Opticontrol measuring stand (model 970070). Gksdpfx Aqjzna Tqsija

Condition: ready for operation (used), Year of construction: 2001, Pos. 1 BKGD-1100 Double band saw 1 pc. - Year of manufacture: 1987 - Made in Sweden - Working height: 1000 mm - Largest cutting height: 350 mm - Largest distance between saw blade and pressure side: 250 mm - Largest distance between the saw blade and the flare side: 250 mm - Smallest distance between the saw blades: 13 mm - Cutting width: 100-120 mm - Blade length: 6300 mm - Feed rate: 10-60 m/min - Motor power (saw): 2x18.5 kW - Motor power (pump): 4 kW - Firing speed: 680 1/min - Feed roller tiltable, max.: 45° - Hydraulic tank: 95 litres - Tank for cleaning fluid: 2x10 litres - Weight: 3000 kg Pos.2 Weinig E1 High-Mech feed magazine 1 pc. - Year of construction: 2001 - Feed max.: 80 m/min - Workpiece length: 1800-6100 mm - Workpiece width: 50 -230 mm - Workpiece thickness: 12-100 mm Pos.3. Weinig Hydromat 23 6 spindle planer/ profiling machine 1 pc. - Year of construction: 2001 Godpsrqhggofx Aqijka - Working width: 230 mm - Working height: 160 mm - Play arrangement: • 1. bottom 11 kW 6000 1/ min (joint) • 2. right 7.5 kW 8000 1/ min • 3. left 7.5 kW 8000 1/min • 4. top 11 kW 6000 1/ min (joint) • 5. top 7.5 kW 6000 1/ min (joint) • 6. bottom 7.5 kW 6000 1/min (joint) - Feed rollers in the table: 3 pieces - Feed, max.: 60 m/min - Counter bearing: for 1st, 4th, 6th spindle Pos.4. pull-out magazine 1 pc. - Year of manufacture: 2018 - Hungarian manufacturer - Outfeed conveyor: 6000 mm (driven) - Cross belt: 5 rubber conveyor belt (driven) Pos. 5. Metron 05C 100/200 metal detector 1 pc. Pos.6. Weinig Rondamat 960 profile knife grinding machine 1 pc. - Year of construction: 2002 - Grinding of planing knives and profile knives - Grinding disc D: 150/225 mm - Grinding disc width: 2,3,4,10 mm - Grinding disc bore: 60 m - Grinding disc motor power: 1.1 kW - Grinding disc speed: 1700,2000,2400,3000 1/min - with cooling unit - Working width, max.: 240 mm Pos.7. Weinig OptiControl tool measuring and display system 1 pc. Pos. 8. Weinig setting gauge 1 pc. - for planer blade adjustment in the planer head Pos. 9. Weinig Hydro planing heads, profile heads, tongue and groove set - 27 pcs. Pos.10. BÖHL Junior S-450 VA wrapping machine 1 pc. - Year of construction: 2002 - Wrapping machine for profiles and long goods - Product dimensions: • Width: 50-420 mm • Height: 20 -300 mm • Length: 1000 - infinite mm • Max. cross-section diagonal: 420 mm - PE stretch film thickness: 17-50 my - Roll diameter: 220 mm - Roll width: 125 mm - Feed rate: max. 20 m/min - Power: 3 kW - Infeed table - Outfeed table