Used Rotary Veneer Lathe for sale (9,504)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, turning length: 280 mm, turning diameter: 270 mm, spindle bore: 62 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 75 rpm, total height: 1,610 mm, total length: 1,520 mm, total width: 1,630 mm, swing diameter over cross slide: 350 mm, turning diameter over bed slide: 450 mm, overall weight: 2,800 kg, number of tool stations in tool turret 1: 12, Okuma LCS-15 OSP 700L CNC controller Iodpfx Ajxm T Dysg Nebc Machine its in very good condition, almost not been i use.

Condition: used, Year of construction: 2016, Hydromat HB32/16 Rotary Transfer Machine. S/No. HB32-768 (2016) Model Epic II Series CNC, Machine Type Hydromat 32/16, Current Machining hours 29,312, CNC Control System Bosch MTX, Horizontal Heads: 16, Vertical Heads: 8, Indexing time : 0,7 seconds, Max. Bar Diameter: 32mm, Max. Part Length: 150m, Weight: 6 500kg Complete with Hydromat Automatic Bar Feed, Swarf Conveyor Knoll 450-K1, Lubricating Tank Knoll VRF 450/2350, Filtration Unit Knoll VRF 450/2350, Air Filtration Erni AG Type A0-1800/2, Additional Heads and Extensive Spare Parts, Machine Manuals Ijdexfu Dfjpfx Ag Nebc Location: This lot is located in South West of England, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2014, operating hours: 2,600 h, This excellent ST-10Y turning center is almost new condition due to minimal use since its purchase in 2014. Only approximately 2600 power ON hours. Viewing possible upon appointment. Immediately available for delivery. The addition of a Y-axis and live tooling allows for milling, drilling, and tapping for increased machine capabilities. Turning length 356 mm Maximum turning diameter 229 mm Chuck 165 mm Tool turret type VDI-40 Number of tool positions 12 Max spindle speed 6000 rpm Memory 750 MB Conveyor yes Including: Driven tools incl. C-axis drive Automatic lubrication system Cooling system Ibedjxm Twmepfx Ag Njc Load Monitor 4 free M functions Rigid Tapping Transformer Main spindle orientation programmable M19 + P 165 mm chuck incl. soft jaw set Ethernet interface 1x Axial drive milling holder, ER-32 for the VDI turret 1x Radial drive milling holder, ER-32 for the VDI turret EZCAM Turn 3DQCRL42/5 Kitagawa collet assembly Automatic tool measuring system Fully programmable hydraulic tailstock Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, Harrison M450 Centre Lathe 60" Between Centres Spindle Speeds 40-2000rpm 12" 4 Jaw Chuck 10" 3 Jaw Chuck Fixed Steady Travelling Steady Ibodexdt Uyopfx Ag Njc Coolant P{ump & System

Condition: new, Year of construction: 2024, functionality: fully functional, spindle bore: 45 mm, turning diameter over bed slide: 360 mm, center height: 180 mm, center width: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 35 rpm, bed width: 250 mm, - Demonstration machine - Ibjdpewrndzjfx Ag Noc - Handwheel on the left of the support - with 3-axis digital display FAGOR INNOVA30iT (Art. No. 103877) * For more information on the exact standard equipment and available options, visit us online or call us directly *

Condition: excellent (used), Year of construction: 2011, Haas ST10 CNC Lathe - Excellent Condition Manufactured 2011 Max Swing over Carriage 419mm Max. Cutting Ø 305mm Max. Cutting Length 406mm Max. Bar Capacity 44mm X Axis Travel 200mm Z Axis Travel 406mm Rapid Traverses 30.5m/min Spindle Power 11.2kW Ijdpfx Aexfi Avog Nebc Max. Spindle Speed 6000rpm Max. Spindle Torque 102nm at1,300rpm Spindle Nose A2-5 12 Station Turret Weight Approx. 2750kgs Supplied with: 3 Jaw Chuck & Jaws Collet Chuck Turret Tooling As Photographed Tailstock *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #79001 Machine Serial Number: 3088908 Cost: £16,500.00 + VAT (£19,800.00)

Condition: used, Year of construction: 1959, turning diameter over bed 460 mm turning diameter over slide rest 280 mm turning length 1000 mm centre height 230 mm 720 mm spindle bore 53 mm spindle turning speed range 28 - 1250 U/min Ibjdpfxexpi A Ds Ag Nsc total power requirement 4,0 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,4 x 1,4 x 1,75 mm Lathes with: - Digital display - Quick-release tool post - 3-jaw chucks (200 mm and 160 mm) - Chip tray - Centering center

Condition: used, functionality: fully functional, workpiece weight (max.): 10,000 kg, overall weight: 4,600 kg, Table size: 1500 x 1500 mm. Max. workpiece weight: 10.000 kg. Country of origin: Sweden. Weight: 4600 kg. Iedoxphdyopfx Ag Nebc With variable turning speed.

Condition: good (used), Thomas Hill Engineering Rotary air rinse Ibedpovw Srbsfx Ag Nec Stainless, Rotary air rinse, 18 station, mobile, 3Ph

Condition: ready for operation (used), functionality: fully functional, Ward 2DB Capstan lathe With Air Chuck Isdpfx Aow Id Nkjg Njbc Various Tooling As Pictured

Condition: new, Year of construction: 2024, functionality: fully functional, spindle bore: 45 mm, turning diameter over bed slide: 360 mm, center height: 180 mm, center width: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, bed width: 250 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 35 rpm, quill mount: MK 3, Equipment: rotational speed infinitely variable, - Demonstration machine - - Handwheel on the left of the support - with steplessly variable spindle speeds and 3-axis digital display FAGOR INNOVA30iT (Art. No. 103878) * For more information on the exact standard equipment Isdpowrngcefx Ag Nsbc and available options, visit us online or call us directly *

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor Iodpfx Agew Hyd Aj Nobc 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21. If you are interested, the machine can be demonstrated under power/chip.

Condition: used, Year of construction: 2008, table diameter 1100 mm table load 1,2 t swivelling range 0 - 135 Grad turning speeds 0,15 - 3,4 U/min table height adjustment von 780 bis 1560 mm max. torque on the faceplate 1300 Nm Dimensions (LxWxH) 2,8 x 1,6 x 1,6 m Welding turntable with new remote control • Self-locking gear system, no pre- or post-running under eccentric loads Iodpsxpi Akefx Ag Nebc • Hydraulic height adjustment allows for virtually unlimited positioning • Frequency-controlled, infinitely variable speed of the rotary table

Condition: used, Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 380 mm, spindle bore: 72 mm, turning diameter: 580 mm, center height: 290 mm, turning length: 1,500 mm, bed width: 400 mm, Turning diameter in gap: 780 mm, overall weight: 3,200 kg, Centre height: 290 mm. Swing over cross slide: 380 mm. Swing in gap Ø: Ø780 mm. Iedpfx Agsxpf D De Nsbc Distance between centers: 1500 mm. Spindlebore: 72 mm. RPM.: 25-2000 (Variable). Width of bed: 400 mm. Tail stock taper: 5 Motor: 11 kW. Digital readout: Newall C80 (X & Y). Year: 2008 Country of origin: Bulgaria. Size (L x W x H): 3100 x 1300 x 1600 mm. Weight: 3200 kg. Ø315 mm. selfcentering chuck, variable speed in 3 gears. Automatic feed and rapid speed through joystick. With quick tool changer. All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 2001, turning diameter max. 320 mm turning length max. 740 mm control Manual Plus 3110 Heidenhain Ibedpfx Ajxmaghog Nsc greates pass round over bed 320 mm Swing dia. over traverse guideway 150 mm turning length 740 mm cross movement 185 mm centre distance 750 mm turning speed range - main spindle 10 - 4.000 min/-1 power capacity - main spindel 11 kW max. Torque 410 Nm spindle head No. 6 DIN 55027 spindle diameter in front bearing 85 mm spindle bore 50,8 mm max. chucking diameter 200 mm chucking diameter 200 mm type MultiFix - B dia. of quill 70 mm capture MK 5 quill stroke 120 mm rapid traverse x/z: 8 / 10 m/min Feed force ( X / Z ) x/z: 3 / 6 kN total power requirement 14 kVA weight of the machine ca. 2,0 t dimensions of the machine ca. 3,5 x 2,5 x 2,0 m Cycle controled Lathe GILDEMEISTER - NEF 320 - Operating-Hours (Power-On) : 21.529h

Condition: used, total width: 1,500 mm, total length: 3,000 mm, total height: 2,000 mm, Empty weight: 2.500 kg - Max. workpiece length [mm]: 2500 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 300 - Number of work zones [pcs]: 1 - Number of cylinders [pcs]: 4 - Cylinder diameter [mm]: 70 - Documentation available: No - Transport dimensions: 3000mm x 1500mm x 2000mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Ibsdjxhcg Topfx Ag Nsc VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1987, Turning length 600 mm Ibodpfxjxl Uvhj Ag Noc Swing diameter over cross slide 260 mm Swing diameter over bed 520 mm Travel X = 290, Z = 700 mm Turret with 12 stations (not driven) Tailstock Coolant pump Chip conveyor Weight 12,000 kg

Condition: used, Year of construction: 2014, turning length 650 mm turning diameter 320 mm centre height 160 mm turning dia. over face-slide 190 mm quill: 3 MK spindle bore 42 mm turning speeds 25-5000 U/min centre distance 650 mm Number of working hours 637 h total power requirement 8 kW weight of the machine ca. 1250 kg Ibedoxn Txaspfx Ag Njc dimensions of the machine ca. 1,6 x 0,5 x 1,7 m Weiler Praktikant VC Plus lathe, built in 2014, from a test workshop, in excellent condition! Features: All 99 storable tools can be programmed separately with feed rate and speed or constant cutting speed. Separate control of speed and feed rate via potentiometer is also possible. Thread pitches are freely programmable and feature electronic limit switches. Additional electronic stops can be set for lengths and diameters. A coolant device is not available. 8" colour screen Energy recovery Accessories: The machine includes a quick-clamping device with 30 collets 5 to Dmr 26 mm, 3-jaw chuck made by Röhm including 10 sets of soft jaws,centring tips, tailstock mounts (MK 3) for thread cutting with threaded drills and dies by hand, 15 Multifix holders size A, turning head for Multifix holder for producing bolt circles,spindle and bed stop, tool cabinet with 12 drawers, WP holder for internal and external machining, drills, reamers, standard thread gauges up to M10, comprehensive documentation on operation and maintenance. Translated with (free version)

Condition: new, Year of construction: 1970, turning diameter over bed 540 mm turning diameter over slide rest 365 mm turning length 2000 mm Isdpfx Ajxpiz Tsg Nobc turning diameter in the gap 800 mm turning speeds 18 - 1400 U/min centre height 270 mm spindle bore 90 mm total power requirement 11,0 kW weight of the machine ca. 2,6 t dimensions of the machine ca. 3,7 x 1,4 x 1,8 m - Multifix Size B - 3-Jaw Chuck 315mm - Chuck Guard - Emergency Stop Device - Foot Switch - Chip Tray - Centering Center

Condition: used, functionality: fully functional, turning diameter over cross slide: 375 mm, spindle bore: 90 mm, turning diameter: 560 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 25 rpm, bed width: 385 mm, overall weight: 3,400 kg, Centre height: 280 mm. Swing over cross slide: 375 mm. Swing in gap Ø: Ø830 mm. Distance between centers: 2000 mm. Spindlebore: 90 mm. RPM.: 25-1250. Width of bed: 385 mm. Tail stock taper: 5 Motor: 11 kW. Digital readout: Electronica EL-400 (X & Y). Country of origin:Germany. Size (L x W x H): 3650 x 1250 x 2000 mm. Iedpfxsxpf A He Ag Nsbc Weight: 3400 kg. With gap, quick tool changer, steady rest and Ø400 mm. 4-jaw independant chuck. All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 1997, turning length 1.000 mm swing diameter max. over bed cover 600 mm swing diameter above cross guideway 420 mm control Eltropilot Heidenhain travel -x axis 275 mm travel -z axis 1.065 mm turning speed range - main spindle 16 - 3.200 min/-1 power capacity - main spindel 27 kW max. Torque 800 Nm spindle diameter in front bearing 120 mm spindle bore 85 mm chucking diameter 260 mm spindle head 220H5 number of toolpositions 12 pos. Shank diameter 40 mm turret change time 0,8 sec. diameter of quill 100 mm quill stroke 120 mm taper of center MK 5 pressure center sleeve max. 950 daN rapid traverse X: 10 / Z: 15 m/min Feed force X: 500 / Z: 1.000 daN total power requirement 52 kVA weight of the machine ca. 7,5 t dimensions of the machine ca. 5,5 x 2,5 x 2,1 m CNC-Lathe Ibedpfx Aoxmagbog Njc GILDEMEISTER - CTX 500

Condition: repair required (used), Year of construction: 2003, Kern lathe CD 402 Baij 2003 in top condition but with control system issues. Ibodpjxn Axcsfx Ag Nec

Condition: good (used), Year of construction: 1986, Turning length 600 mm Ijdpfx Agjxl Urij Nebc Swing diameter over cross slide 260 mm Swing diameter over bed 520 mm Travel X = 290 mm, Z = 700 mm Turret with 12 stations (non-driven) Coolant pump Chip conveyor Weight 12,000 kg

Condition: used, Year of construction: 1979, Year 1979 Retrofit 2013 max. turning diameter 1300 mm table diameter 1000 mm workpiece height max. 1500 mm working lenght 1050 mm 280 U/min. T-slots 48 x 28 speeds 4,75 - 250 U/min rapid traverse 6000 mm/min In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Retrofit 2013 Precision class: IT7 Technical features - 4-fold swivel head Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Iodpfjxmk E Uox Ag Nobc Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: good (used), functionality: fully functional, spindle bore: 95 mm, center height: 450 mm, turning length: 3,000 mm, total length: 6,000 mm, total width: 2,000 mm, total height: 1,900 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, type of input current: three-phase, overall weight: 8,000 kg, three-jaw chuck diameter: 500 mm, With Ø500 mm. selfcentering chuck, 2 steady rests, follow rest, spindle stops, Ø600 mm. 4-jaw independent chuck and lots of equipment. Ibsdpexn Rk Tjfx Ag Noc All our machines are tested and serviced before delivery.