Used Roto Grinder for sale (1,871)

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, color: green, overall weight: 12,900 kg, maximum load weight: 3,800 kg, lifting height: 15,740 mm, Year of construction: 2007, operating hours: 6,100 h, machine/vehicle number: Roto 38.16, Equipment: UVV, all wheel drive, hydraulics, pallet forks, Rotating Telehandler Technical Specifications Working height: 15.74 m Lateral reach: 12.98 m Slew range: 415° Length: 6.24 m Width: 2.24 m Clearance height: 2.85 m Bwedpfjtucp Tjx Al Ijl Lifting capacity: 3,800 kg Platform capacity: 300 kg Total weight: 12,900 kg Stabilizers: angled outriggers Drive: diesel Accessories: Forks Remote control only available for platform function Driver’s license class: 3/B Inspections / Status Safety inspection (UVV) valid until 11/2025 Operating hours: 6,100 h as of 02/2024 Interested? We are happy to assist you at any time. You can reach us from Monday to Friday between 7:00 a.m. and 4:00 p.m. Price stated plus VAT at the legal rate. Subject to change and errors!

Condition: excellent (used), Year of construction: 1988, Tool grinding machine, manufacturer MICHAEL DECKEL, model S0, year of manufacture 1988. Comes with accessories and operating manual. In very good original condition. Bjdpeyxgm Iofx Al Iswl Further data can be found in the specification sheet.

Condition: excellent (used), Year of construction: 1994, total length: 2,950 mm, total width: 2,100 mm, feed length X-axis: 650 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 400 kg, feed rate X-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, grinding wheel diameter: 350 mm, table length: 600 mm, table width: 400 mm, Digital read out system position slides Bodpfjyvhxmjx Al Ijwl 5 stones and flanches Coolant and Filtration system CE Mark Levelling pads included  Full set off books  X - Travel: 650mm Y - Travel: 400mm Z - Travel: 400mm Table Length: 600mm Table Width: 400mm Table load: 400 Feed rate X-Axis: 0-5000mm/min. Feed rate Z-Axis: 0-5000mm/min. Grinding stone dimensions:350 x 127 x 50mm Power: 6kW Speeds: 1400Rpm Cooling system: Yes Feed rate Y-Axis: 0-5000mm/min. Length: 2950mm Width: 2100mm Height: 2000mm Weight: 2550kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2009, operating hours: 100 h, functionality: fully functional, machine/vehicle number: SKU 102781, overall weight: 1,300 kg, power: 4 kW (5.44 HP), space requirement width: 1,350 mm, space requirement length: 1,520 mm, space requirement height: 1,400 mm, Equipment: rotational speed infinitely variable, The special design of the Multi Grind makes it possible to combine the functions of cylindrical, surface, and tool grinding in a single machine. During external cylindrical grinding, the workpiece can be clamped on one side or supported between centers in the robust tailstock. An internal grinding attachment can also be mounted on the headstock, and even light surface grinding tasks are possible with this model. In tool grinding operations, the Multi Grind allows for precise sharpening of the cutting edges on a wide variety of tools – making it particularly versatile in its application. - External and internal cylindrical grinding - Surface grinding Bedpfxexqgi Ds Al Iowl - Tool grinding - Hydraulic table feed - Extensive accessories

Condition: excellent (used), Year of construction: 1994, center height: 100 mm, grinding length: 380 mm, total width: 1,500 mm, total length: 1,300 mm, total height: 1,350 mm, grinding diameter: 200 mm, spindle speed (max.): 1,800 rpm, overall weight: 2,100 kg, pivoting range: 10 °, Centre height: 100mm Grinding Ø: 200mm Grinding length: 380mm Bwsdpfjyu Nqgox Al Ijl Grinding stone dimensions:300 x 50 x 127mm Grinding stone speeds: 1800Rpm Table inclasement: 10° Tailstock: 4Mk Length: 1300mm Width: 1500mm Height: 1350mm Weight: 2100kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2017, operating hours: 2,690 h, load capacity: 4,000 kg, lifting height: 18,000 mm, fuel type: diesel, construction height: 3,000 mm, gearing type: automatic, Roto telescopic handler by manufacturer Merlo, RT 38 / Roto 40.18 S * Model: RT38 / Roto 40.18 S * All-wheel drive * Year of manufacture: 2017 * Operating hours: 2,690 (as shown on the meter) * Lift height: approx. 18 m * Maximum load capacity: approx. 4,000 kg * Maximum outreach: approx. 15.5 m * Single cab with 1 seat * Powered by 4-cylinder Kubota diesel engine, 4x4x4 * Maximum speed: 20 km/h * 3-stage telescopic steel boom * Tire size: 405/70-R20, tread depth 14-18 mm, wheelbase 2,750 mm Bodpfeyq Apusx Al Iewl * Overall dimensions (L x W x H): 6,250 x 2,300 x 3,000 mm * Total weight: 13,900 kg * Hydraulic 4-point outrigger support: 4,700 x 3,900 mm * Pallet forks, tine length 1,200 mm, radio remote control Further details and additional images available upon request. This description does not constitute a binding offer and may contain errors. No guarantee for all information provided. Please also visit our homepage.

Condition: used, Year of construction: 2017, operating hours: 2,690 h, Equipment: all wheel drive, Rotary telescopic handler by manufacturer Merlo, RT 38 / Roto 40.18 S * Model RT38 / Roto 40.18 S * All-wheel drive * Year of manufacture: 2017 * Operating hours: 2,690 as per the hour meter * Lift height: approx. 18 m * Maximum load capacity: approx. 4,000 kg * Maximum outreach: approx. 15.5 m * Single cab with 1 seat * Powered by 4-cylinder Kubota diesel engine * 4x4x4 Bwsdpfx Alsyq Anwj Iel * Maximum speed: 20 km/h * 3-stage telescopic steel construction * Tire size: 405/70-R20, tread depth 15–20 mm, wheelbase 2,750 mm * Overall dimensions (L x W x H): 6,250 x 2,300 x 3,000 mm * Total weight: 13,900 kg * Hydraulic 4-point outrigger support 4,700 x 3,900 mm * Pallet fork, tine length 1,200 mm, radio remote control Further details and additional images available upon request. This description does not constitute a binding offer and may contain errors. No guarantee can be given for the accuracy of all information provided. Also visit our homepage.

Condition: used, Year of construction: 2017, operating hours: 2,809 h, Equipment: all wheel drive, Rotating telescopic handler by Merlo, model Roto 38.16 S * Model RT38 / Roto 38.16 S * All-wheel drive * Year of manufacture: 2017 * Operating hours: 2,809 (as per hour meter) * Lifting height approx. 16 m * Max. lifting capacity approx. 3,800 kg * Max. outreach approx. 13 m * Single cab with 1 seat * Powered by 4-cylinder Kubota diesel engine * 4x4x4 configuration * Maximum speed: 20 km/h * 3-section telescopic steel boom * Tire size: 400/70-R20, tread depth 15-20 mm, wheelbase 2,750 mm * Overall dimensions (L x W x H): 6,250 x 2,300 x 3,000 mm * Total weight: 12,100 kg * Hydraulic 4-point stabilizers, footprint 4,700 x 3,900 mm * Pallet forks, tine length 1,200 mm, radio remote control Further data and additional images available upon request. This description does not constitute a binding offer and may contain errors; no guarantee for all details. Bsdpsyq Anqsfx Al Iowl Please also visit our homepage.

Condition: used, Year of construction: 2017, operating hours: 2,809 h, load capacity: 3,800 kg, lifting height: 16,000 mm, fuel type: diesel, construction height: 3,000 mm, gearing type: automatic, Rotary telescopic handler by manufacturer Merlo, model Roto 38.16 S * Model: Roto 38.16 S * All-wheel drive * Year of manufacture: 2017 * Operating hours: 2809 as per meter reading * Lifting height: approx. 16 m * Max. load capacity: approx. 3,800 kg * Max. outreach: approx. 13 m * Single cabin with 1 seat Bwsdpoyq An Rofx Al Iol * Powered by 4-cylinder Kubota diesel engine, 4x4x4 * Maximum speed: 20 km/h * 3-piece telescopic steel boom * Tire size: 400/70-R20, tread depth 10–20 mm, wheelbase 2,750 mm * Overall dimensions (L x W x H): 6,250 x 2,300 x 3,000 mm * Total weight: 13,900 kg * Hydraulic 4-point outrigger support: 4,700 x 3,900 mm * Pallet fork, tine length: 1,200 mm, radio remote control Further details and additional images available upon request. This description does not constitute a binding offer and may contain errors. No liability for all information provided. Visit our homepage as well.

Condition: excellent (used), Magnet dimensions: 60 x 20 cm, working area: 22 x 65 cm Bodpfx Alsy Ittgs Iswl

Condition: used, Year of construction: 2006, functionality: fully functional, center height in crank: 1,100 mm, workpiece weight (max.): 180,000 kg, grinding length: 11,000 mm, grinding wheel diameter: 1,066 mm, total length: 11,700 mm, quill travel distance: 11,700 mm, workpiece weight between centers: 180,000 g, distance between centers: 11,700 mm, POMINI CNC Roll Grinder Model HD-425-2-7L Siemens 840D, 12 Axes. Built in 2006. Two flatbed system grinding and workpiece ways are separate. Machine accuracy. Straightness 0.001-0.002 mm/m. Roundness 0.001-0.002 mm. Eccentricity 0.002 mm. Profile for crown height up to 0.1 mm ±0.002 mm/m. Surface finishing without chatter marks and no feed marks after finishing grinding stage. On an independent bed: Auto Caliper Diameter 870 - 2,250 mm. Eddy current crack and bruise detector probe. Ultrasound depth probe up to 180 mm. High Pressure wheel cleaner. Wheel dynamic balancing electromagnetic automatically or manually. Wheel dressing device with diamond. 2 Hydrostatic Steadies. 2 Hydrodynamic Steadies. 4 Soft landing for roles. Wheel quick change device incl motor. Jib crane. Vibration Measurement, recording on: Headstock base Neckrests Foot stock Wheel head Wheel head back Carriage Lateral side. Working Capacity. Grinding length 11,000 mm Max diameter with 1,066 mm Grinding wheel 2,200 mm Min diameter with 1.066 mm Grinding wheel 800 mm Center distance 11,700 mm Max Roll weight 80 Tons Max Roll weight with Steadies 180 Tons Min distance between wheel center and roll axis 845 mm Max distance between wheel center and roll axis 1,635 mm Bwodpfx Alowdmy Sj Ijl Carriage Axis Z, Hydrostatic Feeds, Infinitely variable 0-6,000 mm/min Oil film thickness 0.020 mm Distance between carriage ways 1,500 mm Ways width 160 mm Total length of the carriage on ways 3,385 mm Wheelhead on Carriage Axis X, Wheel Probe Axis A, Inspector Axis A1, Wheelhead cross travel Ballscrew, Axis X 940 mm Resolution axis X 0.0001 mm Wheel Spindle length 1,695 mm Spindle bearing, hydrostatic, diameter 254 mm Resolution Infeed micrometer handwheel, Axes X 0.00001 mm / division Continuous wheel infeed, U axis on radius 0 - 0.35 mm/min Rapid wheel indeed, axes X 0-830 mm/min Wheel motor, AC 130 kW Wheel Speed 400-1,100-1,600 rpm Wheel Cutting Speed infinitely variable Surface speed wheel diameter 1,066 mm 45 m/sec Surface speed wheel diameter 670 mm 45 m/sec Wheel hole, diameter 508 mm Wheel thickness 76 - 152 mm Wheel diameter 670 - 1,066 mm Crowning, Axis U. Max crown on the diameter 10 mm Max concavity on the diameter 10 etc Head stock Workpiece rotating speed 5 - 50 rpm Headstock motor 200 kW Max transmissible torque 76.5 kNm Faceplate control system V Belts Max Center diameter, metric type 160 mm Stroke of Quill 150 mm Length of headstock 3,110 mm Tail stock Quill diameter 260 mm Stroke of quill 750 mm Maximum center diameter, metric type 160 mm Taper Metric 5% on the diameter Tailstock length 1,300 mm Stroke of tailstock 8,000 mm Caliper, Arm Axis C, Carriage Axis V, Rotation Axis B. Max measurable diameter 2,250 mm My measurable diameter 870 mm Machine Dimensions. Machine weight 130 tons Length 19.5 m. Width 5.5 m. Height 3.2 m. Foundation depth 3.8 m.

Year of construction: 2025, condition: used, functionality: fully functional, HUSQVARNA Cut-Off Grinder K 4000 Wet — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced Bjdoy A Hdhspfx Al Ijwl - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 800 plus VAT | EXW Einbeck | Delivery upon request

Year of construction: 2024, condition: used, functionality: fully functional, Milwaukee Cordless Cut-Off Grinder MXF COS350-601 — Year of manufacture 2024 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. 350mm cordless cut-off grinder with petrol-equivalent power for reinforced concrete. Faster cuts, less vibration, zero emissions. Technical data: Weight: 16,7 kg | Max. cutting depth: 125 mm | Cutting disc: Ø 350 mm Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational Bwedoy A Ha Nepfx Al Isl - Product images are sample photos showing the machine in new condition — actual condition varies depending on duration of use - On-site inspection in 37574 Einbeck available by appointment Price EUR 1,400 plus VAT | EXW Einbeck | Delivery upon request

Year of construction: 2025, condition: used, functionality: fully functional, HUSQVARNA Cut-Off Grinder K 4000 Cut-n-Break — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images Bwodpfjy A Hapex Al Isl - On-site inspection in 37574 Einbeck available by appointment Price EUR 1,600 plus VAT | EXW Einbeck | Delivery upon request

Year of construction: 2020, condition: used, functionality: fully functional, Vogt Stump Grinder B 22 — Year of manufacture 2020 Bwsdpfxey A E E Ro Al Isl Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 7,900 plus VAT | EXW Einbeck | Delivery upon request

Condition: good (used), Code: 0361 Brand: NERLI Model: PN 28 Bwodpfxsy D T Eus Al Isl Semi-automatic sanding machine for wood, varnish, polyester, with 1 abrasive belt N° 20 pads with automatic lowering by means of selectors Table lenght mm 3000 Table width mm 950 Automatic table raising Electronic display Inverter for belt speed Blowers for abrasive belt cleaning Main motor 20 Hp Table lifting motor 1 Hp Max working height 550 mm Belt dimensions mm 9650 x 150 Belt speed mt 25/sec Side support guide N° 2 suction outlets diameter 160 mm Overall dimensions: mm 4850 x 2000 x1850 h Weight kg 2000

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, product length (max.): 1,400 mm, product width (max.): 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Number of blast turbines: 4 Power per blast turbine: 22 kW Abrasive throughput per turbine: 7 kg/hour Shot flow rate: 450 kg/min Blast velocity: 80 m/s Maximum product dimension: 1,400 x 1,000 mm Cabin diameter: 2,200 mm MACHINE DETAILS Control system: Siemens EQUIPMENT Vibratory screen for abrasive media and discharged material Bjdpfx Aeyua D Rol Iewl Feed via external rail system CE marking

Condition: used, functionality: fully functional, Tool Grinding Machine Manufacturer: DECKEL, Model: S 1 Technical Details Manufacturer: DECKEL Model: S 1 Speed: from 3750 to 7500 rpm Connection: 380 V Machine weight: approx. 400 kg Dimensions (L x W x H): 1.2 x 0.70 x 1.40 m Bsdpoyw N Tusfx Al Ijwl All information provided without guarantee. A powered demonstration is possible at any time in our showroom.

Condition: excellent (used), CATALOG NUMBER 7324 Technical Specifications: - Max workpiece width: 200 mm - Max workpiece height: 190 mm 2 sanding units: - Top: steel roller + pad + steel roller - Bottom: steel roller + pad + steel roller Top: - 2 pressure rollers, rubber, feed - sanding unit - idler roller - 2 pressure rollers, rubber, feed Bottom: - sanding unit - side guiding rail - electronically adjustable sanding height 0.37 kW - 6 feed speeds + forward/reverse: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor 0.6 kW - main motors 2 x 4 kW - extraction port diameters: 80 mm, 90 mm - overall dimensions (L/W/H): 1830 x 860 x 1760 mm - weight: 630 kg – unpainted Bodpfx Ajx S I Nqjl Iswl – used sander, in very good condition Net price: 11,500 PLN Net price: 2,730 EUR (based on rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7854 Bsdpfxeyh H A Ds Al Iewl Technical data: - belt length: 2515x152 mm - belt width: 150 mm - oscillation - vertical oscillation movement - sanding length: 790 mm - table size: 840x300 mm - worktable for contoured elements: 300x250 mm - worktable adjustment: 80 mm - motor: 2.2 kW - sanding unit adjustable angle: 90-45 degrees - sanding head adjustment: 0-45 degrees - extraction port diameter: 100 mm - dimensions (length/width/height): 1450/600/1230 mm - weight: 138 kg ADVANTAGES – with oscillation – with shoe – suitable for contour and straight sanding – unit can operate vertically and horizontally – unpainted – used sander, very good condition Net price: 3,900 PLN Net price: 930 EUR (depending on the 4.2 EUR rate) (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW Bwedpoy Drn Uefx Al Ijl - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: excellent (used), For sale: the grinding machine shown in the photos, manufactured by the British company Eliot, model 618. The condition of the machine is rated as very good – almost like new. It has been used very rarely, which is the reason for the sale. Net price, VAT 23% Bwsdpfx Aey A Tnmol Iol AEG motor 1.5 kW Maximum spindle-to-table height: 400 mm Rapid traverse in Z axis Table size: 150x450 mm

Condition: used, Year of construction: 2016, functionality: fully functional, 2 used Cumberland grinders Price per unit (€3,200) Year of manufacture: 2016 Technical specifications Bwedoymr Rtjpfx Al Ijl - Motor power: 7.5 kW - Rotor speed: 1,440 rpm - Knife configuration: - 3 rotating knives - Power supply: 380–420 V - Rotor type: Open, soundproofed - Typical applications: Granulation of injection-molded parts

Year of construction: 2008, condition: used, functionality: fully functional, Used Cumberland Grinders Year of manufacture: 2008 Bodpfxsymr N Ns Al Iswl Technical Specifications - Feed throat size: 305 mm x 400 mm - Motor power: 4.0 kW - Rotor speed: 1440 rpm - Knife configuration: 3 rotating knives - Power supply: 380-420 V - Rotor type: Open, soundproofed - Typical applications: Granulation of injection-molded parts

Condition: good (used), CNC grinder Bjdsvviamspfx Al Iewl 3 grinding units on each side