Used Round Table Covers for sale (45,649)

Condition: used, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through numerous channels or higher current ranges - Enterprise deployment with extensive safety features & data persistence Todewwrxaspfx Adljf Technical data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel output: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2,600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recuperation Temperature monitoring: Optionally integrable, range 0–90°C ±2°C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: GG94US-13608, total width: 6,200 mm, total length: 10,500 mm, overall weight: 6,000 kg, input current: 34 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 8 bar, pressure: 8 bar, Table for laminated glass, max 8+8 and 4600mm including loading table 100BLM-J Total weight approx. 6000Kg. Tjdpfxjxq D Uwj Adlsf

Condition: ready for operation (used), Feeding table Kleemann Dim.: 6500 x 1300 mm Todpfou S Tq Nsx Adlef Incl.: E-motor

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Stainless steel work table AT 3500 with beechwood worktop and rear gallery 2 x stainless steel sliding doors with storage shelf Drawer unit on the left, shortened Door with shelf, shortened Dimensions: 3500 x 800/700 x 900 mm (WxDxH) Used device, cleaned Top sanded & re-oiled Delivery service Many more work tables in stock! Tedsrhd Udepfx Adljf

Condition: used, Year of construction: 2008, Technical details: bar material dia.: 15-65 mm bar length: 3200 mm Channel sizes: 15-65 mm weight of the machine ca.: 2,2 t dimensions of the machine ca.: 4,4 x 1,1 x 1,7 m This TOP Automazioni X-Files 365 M bar loader magazine was rebuilt by TOP Automazioni in Italy in 2016 and has worked max. 10 hrs since then. It is in excellent condition and currently installed at a DMG Mori NLX 2000 SY. Fully automated bar loader magazine for machines with a maximum bar capacity of 65 mm with automatically changeable diameter for bars from 15 to 65 mm. Tedjxz Ey Aepfx Adlsf No change of channels and pushers anymore, no spindle reduction tubes necessary. Loader is programmable in mm increments. *

Year of construction: 2024, condition: new, The hydraulic scissor lifting table Unicraft Type SHT 2000 (1300058) offers a reliable solution for your lifting projects, e.g. for manually loading a planner machine or saw from entire timber stacks. With an impressive load capacity of 2000 kg and a robust construction, this lifting platform is ideal for use in industrial environments. This scissor lift table is characterized by its precision and ease of use and enables you to lift heavy loads safely and efficiently. With its table height of max.: 1,010 mm, the Unicraft SHT 2000 is the ideal choice to improve your workflows and spare the back of the machine operator. Capacity: 2.000 kg table height min.: 190 mm Table height min.: 190 mm Table height max.: 1.010 mm table height max.: 1.010 mm table surface: 800 x 1.300 mm tabletop: 800 x 1,300mm Cable length: 3 m Safety standard: EN 1570 cable length: 3 m drive: Electrical-Hydraulic security standard: EN1570 engine: 0,75 kW safety standard: EN 1570 State: New with warranty Todpfx Ajnzh Hfodlof

Year of construction: 2023, condition: like new (used), Thermo Fisher Type: ARL easySpark metal analyzer Analysis table spectrometer with PC, monitor and software Thermo Scientific OXSAS 2.7 software OXSAS is the most modern software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate editing of data sets using fill-down and increment-down tools OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables it to meet all your requirements. Technical machine description: Condition: fully functional In mint condition Year of manufacture: 02/2023 Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized plants and laboratories in the metal industry that require high-quality but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods and other industries. The device impresses with its particularly high resolution thanks to a unique optical system based on multi-grating/CCD (charge-coupled device). Additional benefits of the Thermo Scientific ARL easySpark analyzer include: Todpfx Adsv Hbvbolef The ability to accurately analyze all elements, from trace levels to percent, in all solid metal samples A breakthrough spark excitation and optical design to ensure best-in-class performance Intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation A robust and reliable design that requires minimal maintenance Compliance with safety and quality guidelines A simple design that is suitable for both novice production users and expert lab staff The instrument is ideal for other areas such as metal recycling, academic and non-academic laboratories and primary metal producers where a cost-effective solution for analyzing metal products and materials for quality assurance and process control or a secondary instrument is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. L x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), controller manufacturer: Mazatrol 640, empty load weight: 19,000 kg, total length: 3,274 mm, total width: 8,100 mm, total height: 3,546 mm, Paletchanger 2 tafels Hoge druk koeling 15 bar Schroottransportband Maximale werkstukafmetingen: 3240 x 880 x 640 mm Longitudinal travel X-axe: 3000 mm Tjdpfx Aexuwxqjdlsf Cross travel Y-axe: 800 mm Travel Z-axe: 585 mm Dimensions clamping space- table: (2x) 750 x 3240 mm Power on spindle: 30 kW Admission in millinghead (ISO): ISO 50 Max speedrange: max 6000 rpm

Condition: used, Technical details: table load: 3 t machine weight approx.: 1,376 kg dimensions LxWxH: 1,4 x 1,7 x 0,18 m positioning rotary table Load capacity tested up to 3 tons. Currently operates in 2 positions at 180 degrees. Can be modified up to a maximum of 270°. Tedpfjxz E Exsx Adljf *

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Bakery and confectionery work table. Stainless steel with granite worktop. Reinforced welded construction. Storage shelf on the left, open on the bottom right. Stainless steel design. Approx. dimensions: 3000 x 800 x 890 mm (W x D x H). Used device, cleaned. We have many more top-quality tables in stock! Tsdpfx Aewv E Niodlef

Condition: new, Field of application: Forestry Todjxxb Epjpfx Adlof

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Tjdpsxta Dysfx Adlof Location: Supplier

Condition: good (used), Zwick Type: BZ1.0 / TH1S Zwick table testing machines Zwick with a maximum force of 1.0 kN. Tedpoddantefx Adlsf The course of the traverse: 1150 mm. Testing speed: 0.1 ... 1800 mm / min Scope of delivery. (See pictures) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2025, cutting width (max.): 280 mm, cutting height (max.): 48 mm, saw blade diameter: 168 mm, cutting width at rip fence: 280 mm, Festool Cordless Table Saw CSC SYS 50 EBI-Set 36 Volt battery voltage, No-load speed 4,500 - 6,800 rpm, tiltable from -10° to +47°, cutting height 0 - 48 mm (at 45° = 34 mm), electric height and tilting adjustment with digital display maximum rip capacity 280 mm, sliding table with cross-cutting width up to 450 mm, miter angle stop 0 - 70°, complete with: saw blade 168 x 1.8 x 20 mm, Z = 42 tooth WD, parallel guide, push stick, angle stop, dust collection bag, riving knife for concealed cuts, riving knife with blade guard, 6 mm hex key, energy set SYS 18 V 2 x 5.5/TCL 6 DUO, stand UG-CSC-SYS Order No.: 577379 available ex stock Seevetal, Todpfexzudqex Adlsf promotion valid until the end of 2025, while stocks last, without shipping and packaging

Condition: used, Year of construction: 1996, Second hand laminated glass cutting table, HEGLA Type VSG M33, year 1996 Tsdpfx Adexxmmxoljf

Condition: used, Year of construction: 2013, cutting height (max.): 104 mm, total length: 2,600 mm, total width: 1,900 mm, total height: 1,800 mm, overall weight: 900 kg, slide length: 2,500 mm, sliding table length: 2,500 mm, No. 04505 Sliding table saw Felder K 700 S Used, year of construction 2013, very good condition Saw blade diameter 250 - 315 mm (350 mm not CE-compliant) Sliding table 2500 mm, anodized, edging shoe Cutting height max. 104 mm Electric height adjustment Electric angle adjustment Digital display for cutting height and cutting angle Speed 4800 rpm Removable flange for grooving tools up to max. 229 mm diameter x 20 mm thickness Parallel fence with digital display and fine adjustment Cutting width 1250 mm Saw motor power 7.35 kW Circular saw unit with double segment suspension Scoring unit 0.75 kW Pivoting circular saw top guard, with 80 mm diameter extraction connection Circular saw table extension 430 x 508 mm Electric switch point with scoring unit on the sliding table Cross table 1150 x 600 mm, with cross-cut fence 2600 - 3200 mm Degree grid with length compensation Double mitre gauge Felder EGL 1350 with calculator Including 6 Silent Power saw blades for wood and aluminum (some unused), 1 scoring blade, 1 grooving/scoring disc Machine ready to plug in with cable and 16 A plug Incl. Technical documentation Transport dimensions approx. 2600 x 1900 x 1800 mm LWH Weight approx. 900 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Tsdpfx Adjxzvaajlef Terms of delivery: ex warehouse

Condition: ready for operation (used), Year of construction: 2015, This TELSONIC TelsoSPlice TS3-6 P3.6 wire welding sytem was manufactured in 2015. It features a 15" SVGA touch screen, a pneumatic unit, and a 3.6kW WeldHead. The machine includes a barcode scanner, keyboard, and a spacious 2000 x 1000 mm table. Consider the opportunity to buy this TELSONIC TelsoSPlice TS3-6 P3.6 Table. Contact us for more information about this machine. Application Types Tsdpfjxyazrsx Adlof Other Plastic Processing Machinery

Condition: used, Year of construction: 1992, table length 1 mm table width 1 mm table load 1 t Todpfx Asu Sbc Nodljf round table plate Ø 600 mm with 3 t-slots (18/30), Slot-distance: 160 mm, with misc. clamping plates and clamping pot!

Condition: excellent (used), Gruse Type: ELD 1-16-1 Gruse lift table ELD 1-16-1 Lift heavy loads easily Scissor lift table: Lift table with double scissors Lift table ELD Type explanation: Type designation ELD Load capacity 500 kg Overall height 350 mm Effective stroke 1600 mm Final height 1950 mm Table top 1250 x 800 mm Tjdpfxergpc To Adljf Lower frame 1250 x 750 mm Lifting time approx. 21 sec. Power 2.3 kW Weight approx. 600 kg Condition: used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2000, Model ... Vipros 20-50-50 Frame Construction ... Bridge Type Press Capacity ... 20 Tonnes (196kN) Press Type ... Servo Controlled Hydraulic Ram Axis Traverse Distance ... 1270 mm x 1270 mm Workable Max. Sheet Size . 1270 mm x 2540 mm (with auto repositioning) Maximum Material Thickness ... 6.35 mm Mild Steel Max. Material Weight ... 105 Kg Max. Material Weight (Max Speed) ... 62 Kg Max. Hole Dia. ... 88.9 mm Number Of Stations ... 31 Stations: 19 x 12.7 mm Tedpfx Asxtu Nwsdlof 6 x 31.7 mm 1 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm 1 x 50.8 mm Axis Speed ... 82 m/min Hits Per Minute (2mm Pitch) ... 1000 H.P.M./2.5mm Stroke (25.4mm Pitch) ... 340 H.P.M./8mm Stroke Turret Speed Bi-Directional ... 35 R.P.M. Punching Accuracy ... ± 0.07 mm Punching Accuracy (High Accuracy Mode) ... ± 0.05 mm Repeatability ... ± 0.015 mm Ram Stroke Length (Maximum) ... 40 mm Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 22 kVA 400V +/- 10% 50 Hz Air Pressure Required ... 5.0 kgf/cm² Air Flow ... 250 1/min Machine Length ... 5030 mm Machine Width ... 2630 mm Machine Height ... 2160 mm Machine Weight ... 9200 kg NC SPECIFICATION Model of NC ... FANUC 18-P Axis ... 3 Axis Simultaneous + PHNC Tape Code ... EIA or ISO (Automatic Recognition) Programming Mode ... Absolute/incremental Min. Input ... 0.01 mm (0.01°) Max. Input ... 99999.99 mm Preparatory Function ... G - 2 Digit T Function ... T - 3 Digit M Function ... M - 3 Digit Single Block ... Yes Block Delete ... Yes Optional Stop ... Yes Editing ... Yes Manual Data Input ... Yes Memory Capacity ... 64 Kb No. Of Programs ... 200 Machine Operation ... Memory Interface ... RS 232 C

Condition: good (used), Round roller 1000 x 1 mm width 1055 mm Tedpfx Asud Sphsdlef roller diameter 50 mm Space requirement : Width 1200 mm height 1230 mm depth 600 mm Weight 110 kg

Condition: good (used), spindle moulder, spindle moulder -Manufacturer: Metabo, swivel table milling machine type Tf 1690 D with support table -Drive: 2.0 kW -Milling spindle: Ø 30 mm -Speeds: 3,000 / 6,250 / 9,000 rpm -Cutter: Ø max. 200 mm -Table length: 3600 x 500 mm Tjdjwha Nbjpfx Adljf -Dimensions: 3600/910/H1610 mm -Total weight: 170 kg

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: DC, table length: 600 mm, table width: 600 mm, It is a portable CNC cutting system from the brand manufacturer Thermacut: Input voltage: (VAC) 230V / 120 V, 50/60 HZ, 180 W, 0.5 A Max. cutting area: 3050×1525 mm Max. cutting speed: 3000 mm/min Vertical stroke: 100 mm Autogenous cutting area: up to 100 mm Plasma cutting area: up to 35 mm Tjdpsv Ai T Hefx Adlof Plasma interface: Yes Burner height control via arc voltage Total weight: 145 KG Scope of delivery: Autogenous torch, nesting software, Operating instructions Mini cutting table: small, portable and robust with water tank for cutting with water 600×600 mm cutting area Grid is replaceable with Drain valve low weight (only 108kg) built-in lockable wheels maximum material load 400 kg can be purchased with plasma device and burner on request!

Condition: new, Parker Cutting table Cross cutting, longitudinal cutting, stacking 280X230X100cm New still packed by the manufacturer! Scope of delivery. (See pictures) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Todpfx Aocbldzsdlef

Condition: good (used), Sheet metal round roller Round roller 1000 x 1.5 mm width 1040 mm roll diameter 55 mm asymmetrical roller arrangement Todpfxeud Spnj Adlef width 1500 mm depth 930 mm height 1280 mm Weight 200 kg without pallet