Used Ryan Ga for sale (5,936)

Condition: excellent (used), Year of construction: 2012, operating hours: 21,000 h, Screw compressor compressed air tank dryer oil remover location Mülheim an der Ruhr Iiodewr Nnbspfx Apnsb

Condition: used, Used Siemens type CFR5 G6A single stage gas expansion turbine. System rated approximately 60,000 Nm3/hr gas feed, 55 bar inlet pressure at 145 deg.c. Includes Loher type JKXK-560MR-04A generator rated output of 3035kW at 1509 RPM with connected power load of 2.8MW. Iisdjy Aaycopfx Apnjb Additional information available upon request.

Condition: used, Used hydrogen plant designed to produce high purity hydrogen and carbon monoxide from natural gas. Built by Air Liquide and first operated in 2015, shut down in August 2024. Output capacity as follows: - Hydrogen 60000 Nm3/hour with 99.99% purity. - Carbon monoxide 14500 Nm3/hour with approximately 99% purity. (Actual purity depends on volume of nitrogen in the natural gas feedstock.) - Superheated 40 bar steam by-product. The HyCO plant includes the following (5) main sections: - Syngas generation / steam reforming and steam generation Iisdpfx Apsy Ryrboneb - Gas cooling - CO2 scrubbing - Gas drying and cryogenic dismantling - Pressure swing adsorption (PSA) Also included: sub-systems for provision of operating resources, flare system, process control and safety shutdown system.

Condition: used, Year of construction: 2011, cutting diameter 335 mm saw band length 4400 x 34 x 1,1 mm table height 750 mm 550 mm 335 mm 550 x 335 mm 330 mm cutting speed 320 x 335 mm down speed 200 mm dimensions of saw-band 200 x 335 mm workpiece weight 15 - 150 m/min 3,0 kW work height max. 1500 kg connected load 2400 x 2200 x 1900 mm Equipment: - Automatic feed unit Iiedpfxjy Sbkhs Apnob - Material end Light barrier - Clamping pressure regulation for automatic machines - Manual saw blade tension - Laser light for cutting line display/scoring saws - Water spray gun

Condition: used, Applicable material: Hay Working width: 730 cm Iodsy Ta Axjpfx Apnsib

Condition: used, - Brand / Model: Bongard 8.60 - Energy: Gas - Type: Rotating convection oven Iisdpfx Apow Dt Dwenob - Trolley included: Yes - Tray dimensions: 600 × 800 mm - Number of levels: up to 18 levels (depending on trolley configuration) - Approx. external dimensions: L 220 cm × D 210 cm × H 260 cm - Steam extraction: integrated, with adjustable flaps - Control panel: mechanical, easy to use - Estimated weight: 1,500 kg

Condition: new, - Dimensions: 910 x 860 x 550 mm - Internal dimensions: 610 x 610 x 170 mm - Weight: 51 kg - Power: 8 kW - Power supply: Natural gas + 230V~ electrical connection - Capacity: 4 pizzas with a 30 cm diameter - Professional oven, ideal for pizzerias with high demand - Designed to offer efficiency, safety, and stability - Fast heat-up thanks to its specially designed chamber - Stable temperature even with heavy use (frequent opening and closing) - High-precision safety thermostat for reliable adjustment - Bakery-style door for easy loading and unloading Isdpfx Aey S R Ipopneib - Natural gas consumption: 0.844 m³/h - Thermal power: 6880 kcal/h

Condition: excellent (used), Year of construction: 2000, used Weishaupt burner ----- RGL70 2-A/ ZM Iiedpfxexf Dzys Apnsb year of manufacture: 2000 output: 1,000 - 10,500 kW

Condition: used, - Oven type: Cervap - Serial no.: 17280 - Year: 04/04/1990 - Plate dimensions: 750x1860 mm - Baking surface: 5.5 m2 - Electromechanical control panel - 4 loading doors Iedpfx Aew Eivfopnoib - With loader/proofer elevator - Voltage: 220V single-phase + earth - Power: 0.6 kW - Electromechanical interface - All Cervap ovens are equipped with this interface as standard - Visual indicators of oven operation - Temperature regulator Ley Tdxuew Eivfjgsrr - Baking timer - On/Off switch - Steam injection - Valve opening control - Front-mounted steam timer - Delayed start timer/clock

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding unit with inverter welding power source Serial no. Year of manufacture 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug - separate 4-roller wire feed unit with connecting hose package meters - digital display for voltage and current - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function - 4 meter Binzel hose package with central connection - water-cooled - shielding gas pressure regulator - MIG/MAG pulse arc welding Iodpfx Apowa Uwdeneib - MSG double pulse welding - MIG/MAG welding Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition

Condition: used, MIG / MAG Pulse Gas-Shielded Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Output: 330 amps = 50% duty cycle (DC) 300 amps = 60% duty cycle (DC) 210 amps = 100% duty cycle (DC) Stepless adjustment range Open circuit voltage approx. 50 V Open circuit voltage approx. 30 V Iedpoyv H Eljfx Apneib Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and amperage - Pulse welding function - Various welding programs selectable Welding methods: MIG/MAG/TIG (programmed and manual modes) 2-stroke, 4-stroke, 4-stroke special, and spot welding - Welding control with program memory and disk drive for external program storage - Separate 4-roller wire feeder FRONIUS Type VR 152 with connecting hose package approx. 1.5 meters - 4-meter BINZEL hose package with central connection - External Fronius water cooling unit Type FK 71 - Welding gas pressure regulator - Supplied with 1.2 mm welding wire Space requirements (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration

Condition: new, Röhm RPP-125-1 / GA parallel gripper LA82x45 Id.170022 SN:B7952 ,unused in opened original box, 100% working, scope of supply according to photos Isdpfxsi Ec Duo Apnsib

Condition: new, Röhm RPP-125-1 / GA parallel gripper LA82x45 Id.170022 SN:Z6653 ,unused in opened original box, 100% working, scope of supply according to photos Iisdpfx Apsi Ec D Ajneb

Condition: ready for operation (used), Röhm RPP-125-1 / GA parallel gripper LA82x45 Id.170022 SN:X5017, used, normal traces of use, 100% functional, scope of delivery acc. photos Iedpfx Apji Ec Dxonoib

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 174146, fuel type: gas, color: blue, power: 10,000 kW (13,596.20 HP), nominal power: 10,000 kW (13,596.20 HP), nominal power (apparent): 12,163 kVA, 10MW Wärtsilä AMG Gas Power Plant with Heat Recovery Primary Power Generation: Wärtsilä W20V34SG Gas Engine - Output: 10,000 kW (10 MW) Iedpjygx Tzefx Apneib - Configuration: 20‑cylinder, spark‑ignited gas engine - Fuel: Natural gas - Year: 2013 Electrical Generation: AMG 1120LT08 DSE Generator - Rating: 12,163 kVA - Year: 2013 Heat Recovery System: Cochran Waste Heat Boiler - Thermal Output: 17,500 kW - Year: 2013 Cochran Economiser – Waste Heat Recovery Unit - Thermal Output: 2,719 kW - Year: 2013

Condition: used, Year of construction: 2021, load capacity: 3,000 kg, lifting height: 4,330 mm, total length: 4,040 mm, - Antrieb Treibgas - Bedienung Sitz - Tragfähigkeit/Last kg 3000 - Lastschwerpunkt mm 500 - Lastabstand mm 485 Isdpfjy S Epuex Apnjib - Achslast mit Last vorn/hinten kg 6230/980 - Achslast ohne Last vorn/hinten kg 1490/2720 - Spurweite vorn mm 1010 - Spurweite hinten mm 965 - Neigung Hubgerüst vor/zurück Grad 6/11 - Sitzhöhe mm 1110 - Kupplungshöhe mm 335 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4115 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4315 - Wenderadius mm 2430 - Kleinster Drehpunktabstand mm 720 - Fahrgeschwindigkeit mit/ohne Last km/h 18,5/19,0 - Hubgeschwindigkeit mit/ohne Last m/s 0,51/0,55 - Senkgeschwindigkeit mit/ohne Last m/s 0,50/0,50 - Steigfähigkeit mit/ohne Last % 23 - Max. Steigfähigkeit mit/ohne Last % 26/20 - Betriebsbremse Hydraulisch - Motorleistung nach ISO 1585 kW 44 - Nenndrehzahl 1/min 2570 - Zylinderzahl / Hubraum cm3 4/2237 - Arbeitsdruck für Anbaugeräte bar 147 - Ölstrom für Anbaugeräte l/min 65-74 - Schalldruckpegel nach EN 12 053, Fahrerohr dB(A) 77

Year of construction: 2011, condition: used, Year of manufacture: May 2011 Isdpfsy Iv H Njx Apnsib Serial number: L177B31996J VERY NICE FORKLIFT HYSTER 2.5 TONS | 12457 HOURS.

Condition: used, Year of construction: 2000, machine/vehicle number: M000000Y5670, functionality: unexamined, Used TEL Alpha-8SE-E Vertical Gas Diffusion Furnace Iiedpfx Apoygvzvjnob Manufacturer: TEL Tokyo Electron Model: Alpha-8SE-E Manufactured: 11.2000 Serial No.: M00000Y5670 No books or documentation included. Pumps/Motor: 2 x Toshiba 3-phase induction motor, 480 Volt, 60 Hz.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, total length: 5,000 mm, total width: 1,500 mm, type of input current: three-phase, year of last overhaul: 2024, working width: 1,500 mm, We are offering this very well-maintained Tesoma Compact gas dryer tunnel, 1.50 m wide, year of manufacture 2009. If you have any questions or would like more information, please feel free to send us a message or call us. Transport to be arranged by the buyer, price excluding VAT. Iiedpoy Icdhofx Apnob

Condition: used, Year of construction: 2005, cutting diameter 230 mm Iisdpfjy N D Nbjx Apnob cutting speed 35 - 70 m/min cutting width 260 x 200 mm saw band length 2720 x 27 x 0,9 mm total power requirement 1,1 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,8 x 1,8 x 1,6 m

Condition: good (used), functionality: fully functional, machine/vehicle number: K005A02146X, Year of construction: 2000, operating hours: 7,920 h, load capacity: 5,000 kg, lifting height: 4,600 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,200 mm, fork length: 2,400 mm, overall weight: 7,880 kg, total height: 3,200 mm, total length: 6,000 mm, total width: 1,520 mm, Equipment: UVV, sideshift, Hyster H5.00XM LPG Forklift Year of manufacture: 2000 Operating hours: 7,920 h Lift height: 4,600 mm to top of forks Overall height: 3,200 mm Iodpfx Aoyi Eyaopnjib Load capacity: 4,410 kg effective with fork positioner and sideshift Overall dimensions approx.: 1,520 mm wide; approx. 3,600 mm long without forks Fork length: 2,400 mm - Fork positioner adjustable from approx. 460 mm to 1,350 mm overall width - Bracket for 2 gas cylinders with changeover valve - Sideshift - Power steering The machine is in perfect working order and ready for immediate use. Affordable delivery by professional service provider possible. Have a look at our other ads as well. We always have a large selection of high and low lift trucks and forklifts in stock. Do you need spare parts for your forklift, pedestrian stacker, etc.? Just contact us. Didn’t find the right unit? Simply send us an email with your requirements and we will check if we have the right machine for you.

Condition: excellent (used), Lovely condition, has come from a butcher’s shop where they were pre-packing meat for onward sale elsewhere. Currently fitted with tooling for 13D trays. Iisdpfer Iyznjx Apneb

Condition: excellent (used), Used gas panels for cylinder filling ramps – Oxygen, Argon, Nitrogen For sale are several professional gas panels/gas distributors for cylinder filling ramps, suitable for oxygen, argon, and nitrogen cylinders. Details: Manufacturer: SIAD GAS SPECIALI Equipped with high-pressure gauges up to 300 bar and precision regulation Iisdpfxjy N S Hhe Apnsb For cylinder filling and gas distribution Collection by arrangement. If you have any questions or are interested, please contact us for more information.

Condition: used, mileage: 263,822 km, power: 188 kW (255.61 HP), first registration: 11/2011, fuel type: diesel, tire size: 315 / 80 / R22.5, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, number of seats: 3, total length: 8,500 mm, total width: 2,550 mm, total height: 3,600 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, power mirror, soot filter, General information Model code: ### Technical information Number of cylinders: 6 Engine capacity: 9.186 cc Transmission Transmission: Allison, 6 gears, Automatic Axle configuration Tyre size: 315 / 80 / R22.5 Make axles: DAF Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Iodpsy H Arcsfx Apnsib Rear axle 1: Max. axle load: 7500 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: air suspension Rear axle 2: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Suspension: air suspension Weights Empty weight: 14.100 kg Carrying capacity: 12.400 kg GVW: 26.500 kg Functional Make of bodywork: Geesink GPM3 17H25 Pump: Yes Interior Interior: grey Maintenance APK (MOT): tested until 11/2026 History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Number of keys: 2 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Baggage cover - Car kit - Low-noise - Particulate filter - Power take-off (PTO) - Radio/CD player - Reversing camera - Speed limiter - Stability control - Visor

Condition: like new (used), Ishida x-ray machine is in great condition. It's hardly been used. It has come direct from a major food manufacture. Iisdpfjy A Rh Rjx Apnob