Used Gastl Rg 200 for sale (63,435)

Condition: excellent (used), power: 150 kW (203.94 HP), fuel type: diesel, color: yellow, Year of construction: 2012, operating hours: 4,237 h, Year of manufacture: 2012 Drive: Wheeled Number of cylinders: 6 Unladen weight: 17,000 kg Working width: 427 cm Technical condition: Very good Optical condition: Very good NEW HOLLAND RG 200 B MOTOR GRADER + RIPPER, YEAR 2012, 4,237 HOURS Prodpfx Ajw Hqb Sjdied Drive: 6x4 Engine: 6-cylinder turbo diesel Net power: 200 HP (150 kW) @ 2,200 RPM Operating weight: 35,274 lbs (16,000 kg) Blade length: 14 ft (4.27 m) Max. blade lift above ground: 17.7 in (450 mm) Max. blade drop below ground: 28.5 in (725 mm) Hydraulic flow: 34.3 GPM (130 L/min) Transmission: Full powershift, 6 forward / 3 reverse gears Turning radius: 24 ft 3 in (7.4 m) Travel speed (forward/reverse): 28 mph (45 km/h) / 19 mph (30 km/h) FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH WE SPEAK SPANISH

Condition: used, Fiber optic cable, fiber optic line, data cable, LAN cable, fiber optic cable, coaxial cable, antenna cable -Manufacturer: Bedea, coaxial cable 93 Ohm -Type: M17/90-RG 71 Podjkwg Hnopfx Adierd -Length: 200m -Price/delivery: complete -Dimensions roll: Ø 400 x 240 mm -Weight: 14.1 kg

Condition: excellent (used), AdBlue refueling truck Type: HT-Mobilus 200 AdBlue Whether in the automotive industry or directly in vehicle operation: with the MOBILUS-AdBlue, the safe refueling of your vehicles is possible in a safe and economically efficient manner. The MOBILUS AdBlue mobile refueling system complies with all relevant technical and legal regulations and is therefore often used in research and development projects. Convince yourself of the quality of this mobile urea refueling device. Technical data: Manufacturer: Rietbergwerke GmbH & C0. KG Type: HT-Mobilus 200 AdBlue Year of construction 2018 Technical data: Dimensions L x W x H: 142 x 73 x 135cm Empty weight: approx. 260kg Useful volume tank: approx. 175 liters Power supply: Connected load: 3.0KW Supply voltage: 400/230V / 50 HZ NPE Podpfxorp Enmo Adierd Fuse protection: 16A Heating: Connected load: 4.0KW Supply voltage: 400V Delivery pump: Output: 0.75KW Supply voltage: 400V / 50 HZ Further technical data: Suction and circulation pump: Power: 0.4KW Supply voltage: 230V / 50 HZ Dispensing valve: Volume flow: max. 40l/min Operating pressure: 0.5 - 3.5 bar Control range: Volume flow: 3.5 l/min. - 45.0 l/min Temperature: 15°C - 45°C Frequency converter: 1,800 1/min BNC sockets: Output: 0 - 10V Operating temperature Operating temperature: max. 45°C Storage temperature: down to -30°C Materials Container: LDPE All other components in contact with the product: LDPE or stainless steel Transport trolley: Steel, powder-coated Seals / hoses: EPDM Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: used, maximum load weight: 33,481 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2010, next inspection (TÜV): 03/2026, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, total width: 2,600 mm, Year of construction: 2010, Refrigeration unit brand: Thermo King Further information: * Curb weight: 8,519 kg * Type | First axle: Goodyear R * Tyre size | First axle: 385/65 R22.5 * Tyre tread depth inner left | First axle: 40% * Tyre tread depth inner right | First axle: 40% * Maximum axle load | First axle: 9,000 kg * Type | Second axle: Goodyear R * Type | Third axle: Goodyear R * Tyre size | Second axle: 385/65 R22.5 * Tyre size | Third axle: 385/65 R22.5 * Tyre tread depth inner left | Second axle: 40% * Tyre tread depth inner left | Third axle: 40% * Tyre tread depth inner right | Second axle: 40% * Tyre tread depth inner right | Third axle: 40% * Maximum axle load | Second axle: 9,000 kg * Maximum axle load | Third axle: 9,000 kg * Price on request: Yes * Position | First axle: Rear * Make | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Make | Second axle: Other * Make | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Lift axle | Third axle: Yes Additional equipment: Podpsxd Nc Tjfx Adierd * Rear doors * Homepage * Tail lift * Lift axle * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inform yourself in advance about the costs and procedures for your country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.

Year of construction: 2000, condition: ready for operation (used), Four injection molding machines from various manufacturers are available. 1) Arburg Allrounder Centex 420C 1000-350, year of manufacture: 1996, clamping force: 1000kN, heating power: 8.6kW, weight: approx. 3850kg. The door interlocks of the machine are defective, and both control blocks are leaking oil. 2) Battenfeld BA 500-200 CD Plus, year of manufacture: 1991, weight: approx. 2500kg. The machine shows general oil leaks, the motor is missing, and the radial piston pump is presumably defective. 3) Demag Ergotech Concept 1000/420-310, year of manufacture: 2000, screw diameter: 32mm. The end plate of the machine is cracked, and there are small oil leaks. 4) Demag Ergotech System 80-310, year of manufacture: 1996, max. operating pressure: 210bar, screw diameter: 35mm, cores: 1. Including Geiger handling unit. The door interlock is defective, and minor oil leaks are present. Documentation available. An on-site inspection is possible. Pedpfx Adoxn S Tpjijrd

Condition: excellent (used), Year of construction: 1998, Arburg 520C-200-675 Clamping force: 200 tons Prjdpexvdaksfx Adijd Year of manufacture: 1998 Screw diameter: 60 mm Tie bar distance: 52x52 cm

Year of construction: 2002, condition: like new (used), I sell the vibration device for the furniture accessories input. SARG TRT - 200 LT, year 2002. Prjdpfxed R Iuhj Adisd Like new, suitable for Biesse machine but possible to adapt for other types. Suitable for different furniture accessories, possible to change. Now adjusted for BLUM. 2pcs. available. Sellable separately.

Condition: used, Steel staircase, external staircase, machine staircase, machine access, extension staircase, machine platform -Manufacturer: Günzburger, machine stairs machine ascent -Step size: approx. 600 x 260 mm -Height: upper step 685 mm -permitted Load: 200 kg Podpjikwgnofx Adisrd -Number: 1x stair available -Transport dimension.: 650/980/H210 mm -Weight: 14 kg

Condition: new, connection G 1/4 adjustable from - up to 0,7 - 8 bar weight 0,86 kg high flow pressure regulator body material: zinc alloy withour gauge manual included 10 pieces on stock! Prodpfx Ajd Ih N Ssdijd

Year of construction: 2004, condition: used, z-travel 200 mm clamping diameter of cutter heads max. 550 mm max. permissible cutter head weight 150 kg mounting plaute diameter for cutter heads 360 mm taper for cutter heads, nominal diameter 500 mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the Pjdpfxevq Sd Re Adijrd sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, maximum load weight: 26,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2015, Year of construction: 2015, Equipment: ABS, Schmitz 3-axle refrigerated trailer SCB S3B, Thermoking SLXe 200 diesel/electric generator, 5+1 pipe/meat conveyors, lift axle, Schmitz axles, disc brakes, air suspension, level control, EBS, ABS Psdpfxowilpve Adijrd First owner 6340 H

Condition: new, Year of construction: 2025, Brand new NC-controlled precision vertical slotting machine for efficient production of keyways. Menu-guided program control for slot depth, slot width, cutting depth, tool width, and number of finishing strokes. Optionally available with a rotary indexing table. Rotary table diameter Ø 320 mm – up to three CNC axes possible. Stroke range of the slotting ram: 0 to 200 mm. Table size: 280 x 500 mm. Clamping table bore: Ø 80 mm. Throat depth: 350 mm. Psdpfx Adoxdi D Deierd Maximum workpiece height: 400 mm. Continuously variable ram speeds: 30 to 120 mm/min. Dimensions approx. 1.2 x 1.2 m x height 2.3 m. Drive power: 2.2 kW. Weight approx. 2,200 kg.

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, For sale is an injection molding machine of the brand Demag, type 80/420-200 System The machine is in good and functional condition ATTENTION: No backup disks available Technical data: Year of manufacture: 2001 Clamping force: 800 kN Tie bar distance V: 420 mm Tie bar distance H: 420 mm Plate size H: 590 mm Plate size V: 600 mm Minimum installation height: 250 mm Maximum plate distance: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Tool weight: 700 kg Screw diameter: 30 mm Dimensions: approx. 4.5*1.50*2 m Weight: 4t Transport and loading can be organized Europe-wide at extra cost on request. Prices plus VAT Inspection possible by appointment. Contact us, our team looks forward to assisting you. Psdenfu I Iepfx Adierd Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, Gear motor, electric motor, electric gear motor, angular gear motor, automatic band saw -Manufacturer: Ruhr gear, angular gear motor -Type: NDK 8760 -Speed: 3000 rpm -Voltage: 200 V/0.15 A -Shaft: Ø 10 x 30 mm -Accessories: V-belt attachment incl. Predpfogfrbmex Adijd -Dimensions: 245/160/H155 mm -Weight: 4.5 kg

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech injection molding machine Prjdpfx Astltvzjdisd ERGOtech 100-420-200 NC4 built in 2001 Negotiable price: €12,500.00 - WITHOUT Wittmann peripheral devices The injection molding machine is in very good condition and ready for immediate use. The ERGOtech 100-420-200 NC4 injection molding machine is for sale. Optionally including all associated Wittmann peripheral devices for an additional charge. We purchased the Demag ERGOtech for a customer order as part of our company expansion in 2020 and equipped it with the appropriate Wittmann peripheral devices. The machine was serviced on site by a DEMAG service technician and has no defects. Due to technical problems with the power supply at our house connection in the company building, we are unfortunately unable to operate the injection molding technology together with other machine tools in our company as desired. Unfortunately, we are undersupplied with the power supply options in our production building. Unfortunately, an expansion of the power output cannot be implemented at our location for economic reasons. OPTIONALLY we also sell all Wittmann peripheral devices: Peripheral devices WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 - dual-circuit temperature control device TEMPRO-PLUS-D-Standard-2-160 DEMO UNIT - used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW(2.4A)60l 1 pc. Flow measurement - ultrasound 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control device Negotiable price: €6,980.00 Wittmann compact cooling device Coolmax C30 WITTMANN WATER COOLER SERIES: COOLMAX C30 DEMO UNIT - used, no defects Negotiable price: 4,750.00€ WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 piece DRYMAX-PRIMUS: E30-70-M for drying plastic granulate - 2 pieces FEEDMAX-S:3NET for conveying free-flowing plastic granulate, hinged lid with integrated collector motor - 1 piece FUNNEL: MT203 Machine hopper 203 for setting up a separator of the 200 series - 1 piece DOSIMAX: MC 18 dosing device for free-flowing granulate Condition - NEW - Unused VB price: 8,467.00€ All prices are plus statutory VAT of 19% ATTENTION: The offer does not include moving or transport costs for the machine. These can be offered and organized as an additional service. If you have any further questions, please feel free to contact me personally at any time.

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning Prjdpew N S E Ajfx Adiod of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: good (used), Year of construction: 2003, operating hours: 69,000 h, functionality: fully functional, clamping force: 2,000 kN, For sale is an Arburg 570 C 2000 150/60 injection molding machine with three components. The machine is fully functional and, after assembly, is ready for use. The third injection unit is not functional because the protective housing was removed for transport. It will be functional again after assembly. The third injection unit can be offered separately (stand-alone). Particularly noteworthy is the year of manufacture of the third unit: 2011 (see image). Technical specifications: Year of manufacture: 2003 Pump hours: 68,287 Cylinder: Ø 30 mm / SP150; Ø 18 mm SP 60 Length: 5,700 mm Weight: 5.7 t Equipment: Q-switch, conveyor belt, core pull, internal pressure Upon request, loading onto a truck and transport throughout Europe can be arranged for an additional charge. Prices plus VAT Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are available! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website Predpfx Ajt Ug Uzsdijd

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data Psdpfxeul Efme Adijrd

Condition: repair required (used), Year of construction: 1970, working width: 4,000 mm, Dimensions and weight are indicative: 4,115 mm (length) × 1,905 mm (depth) × 2,620 mm (height); weight: approx. 11,000 – 14,000 kg. Psdpfxoxrcnxe Adiord The machine requires a part, engine is not present. Possibly concerns a 22kW 1,500 rpm motor.

Condition: good (used), Year of construction: 1980, TIG welding machine Messer Griesheim GW 200 DC 400 Volt Psdpfxstd Hhde Adierd

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), gearing type: other, axle configuration: 4x4, overall weight: 500 kg, empty load weight: 340 kg, maximum load weight: 160 kg, first registration: 09/2011, emission class: none, driver cabin: other, brakes: other, number of seats: 1, Equipment: all wheel drive, * Dücker extension arm UNA 200 * The basic unit is used to hold various implements * Reach: 3.40 meters * Transport width: 1.65 meters * Weight of basic implement 340 kg * Displacement of 1.15 meters * The implement can be used on the left, right and in front of the vehicle thanks to a hydraulic drive. * Swivel angle of implement 140° * Year of construction: 2011 If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Prodpoxl Skvsfx Adisd Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, Used machine Podpjxfc R Hofx Adijrd Condition: like new Equipment and technical data to follow

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) Prodpfx Ast Awm Dsdiod - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,308 h, functionality: fully functional, Force Presscylinder: 6000 KN Steel, Gush: 16 to/h Prodoxuqv Nspfx Adisd Aluminium: 6-8 to/h Driving Power: 2x22 kW Arrangement Surface 7,1x3,3 Machnie weight: 51 to Place: Austria Available immediately

Condition: good (used), machine/vehicle number: 202 0239, range of control current flow: 25 - 190 A range of control alternating flow: 25 - 190 A Pedpfscvbu Rsx Adiord current flow 60% ED: 190 A current flow 100% ED: 160 A alternating flow 60% ED: 170 A alternating flow 100%ED: 160 A space needed: 1200 x 600 x 800 mm weight: 300 kg