Used Sab Saw for sale (6,105)

Condition: like new (used), Year of construction: 2019, Altendorf F45 EvoDrive panel saw in like-new and fully functional condition, manufactured in 2019. Gbodezzrwuspfx Aayet The saw has only 9 operating hours!!! Saw blade swivel: 0° to 46° Max. saw blade diameter: 450 mm Max. cutting height: 150 mm (vertical) / 103 mm (at 45° tilt) Power (main motor): 5.5 kW Parallel fence: 1,000 mm Angle/cross fence: extendable up to 3,200 mm Dust extraction connections: Ø 80 mm on the guard (top), Ø 120 mm on the port (bottom) Machine weight: approx. 1,200 kg Optionally, a suitable dust extraction system from Höcker Polytechnik / Nestro can also be purchased (see last picture). The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses and excludes any liability for material defects. No guarantee, warranty, or right of return.

Condition: good (used), Year of construction: 1993, Used circular saw machine from Kaltenbach Gbsdpfx Aajzz Rahoyjt Type KKS 400 EC Year of manufacture 1993

Condition: excellent (used), Karmetal OSA 300 x 370 PLC Controlled Fully Automatic Bandsaw Balde Speeds Variable 25 – 90m/min (Invereter) Round Section 300mm Rectangle Section 280 x 370mm Sqaure Section 280mm For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #270341 Machine Serial Number: 21482 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Gbjdozuxugepfx Aayst Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2010, Panel saw Manufacturer: Felder Type: Kappa 550 Year of manufacture: 2010 Sliding table length: 3,200 mm Cutting width: 1,250 mm Cutting height: max. approx. 204 mm Power: 7.5 kW Max. saw blade diameter: 550 mm Height adjustment: Electric Angle adjustment: Electric Godozy Uzyopfx Aaysbt Cutting width display: Digital Scoring saw: No Motor brake: Yes

Condition: like new (used), Year of construction: 2022, operating hours: 30 h, Type : OPK 5800 -h / OBC5800 = same machine Min - Max lenght : 800 - 5800 mm, with infeed system. Thikness : 75 - 100 mm Width : 75 - 150 mm Gbodezz Hunjpfx Aayot Speed : Block lenght 75 mm = 45 blocks / min Engine size : 7,5 Kw Electric cabinet with PLC touch screen. For Pallet blocks or similar. Only 30 operating hours, like new all over.

Condition: used, Year of construction: 2015, Colour: White Weight: 4.000 kg - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AE/034421 - Main motor power [kW]: 9.0 - Software: Wincut 12.2.9 - Saw blade bore diameter [mm]: 80 - Max. saw blade diameter [mm]: 320 - Max. cutting length [mm]: 4150 - Max. cutting width [mm]: 2200 - Max. cutting height [mm]: 67 - Spindle speed: - └ Min. spindle speed [rpm]: 1000 Gbsdpfjzzb I Nex Aayjt - └ Max. spindle speed [rpm]: 5000 - └ Spindle speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 21 - Fuse [A]: 32 - Power [kW]: 8.4 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1983, functionality: unexamined, input voltage: 220 V, total length: 4,000 mm, total height: 1,600 mm, table height: 900 mm, For sale is a BOTTENE oscillating/miter saw with a large roller table and material support. Technical data: Manufacturer: BOTTENE Model: A Year of manufacture: 1983 Machine no.: 95 Connection: 220 V Gedpjzzcfiefx Aayobt Angle adjustment up to approx. 45° Large roller table Material stops Dust extraction connection Main switch Emergency stop Mobile Saw blade mounted Dimensions approx.: Overall length: 4.0 m Height: 1.60 m Table height: approx. 80–90 cm Table width: approx. 70–100 cm Used, condition appropriate for its age. Signs of wear and paint damage are present. Condition, see images. Inspection possible by appointment.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 140 mm, cutting width (max.): 1,400 mm, saw blade diameter: 420 mm, tilt adjustment saw blade: 45 °, saw blade bore: 30 mm, actuation type: hydraulic, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Panel saw ALTENDORF, F45, with scoring unit, tilting and height adjustment of the saw blade electrically controlled up to 45 degrees, sliding table 3000mm. Godpezzy Saofx Aayebt

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,020 mm, saw blade diameter: 500 mm, total length: 7,100 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,600 kg, Classic Magic 500 TU6 - Double mitre saw with program/positioning control - Electrically adjustable saw head, speed = 20 m/min. - Saw blade diameter 500 mm - Saw blade bore 32 mm Gbjdpfx Aasz Adxtsyst - Max. cutting length 4,200 mm; automatic cutting up to 10,000 mm possible in oversized cutting mode - Min. cutting length at 90° = 225 mm - Horizontal pivoting of the saw heads - Mitre range from 90° to 22.5° (outward) - Saw heads with automatically controlled full safety guards - Profile support roller conveyor (right) - Pneumatic material/workpiece clamping The machine includes the following accessories: - Cleverbridge for data transfer via USB or RJ45 - Long roller conveyor - Additional tensioner on the roller conveyor - Horizontal + vertical tensioners - Macro function (ideal for mosquito screen manufacturers) - Oversized cutting - Shortcut - Cross-cutting - Automatic cutting - Automatically extending profile support

Condition: used, Year of construction: 1999, total length: 7,200 mm, total width: 1,100 mm, total height: 1,700 mm, Colour: Grey Weight: 750 kg Gbedpfxozwl Avj Aayet - Year: 1999 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 251855 - Main motor power [kW]: 2.2 - Max. cutting length [mm]: 6000 - Max. cutting depth [mm]: 160 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 400 - Arbor saw blade diameter [mm]: 30 - Spindle speed: Manual - Min. spindle speed [rpm]: 2800 - Max. spindle speed [rpm]: 2800 - Voltage [V]: 400 - Current consumption [A]: 11.2 - Fuse [A]: 16 - Power [kW]: 4.5 - Transport dimensions: 7200mm x 1100mm x 1700mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1969, functionality: fully functional, power: 25 kW (33.99 HP), control voltage: 380 V, Completely refurbished, it is in very good condition and features adjustable feed. It comes with 4 new bandsaw blades, each 100 mm wide. Gbjdpfx Asy U H Hasayjt

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Horizontal thin-cutting band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. 80 mm blade width Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Gjdpfx Aszy H Dysaysbt Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new *

Condition: excellent (used), Year of construction: 2010, Used machine in top condition – training machine – Year of manufacture: 2010 Digital display in Y Equipment and technical data Cutting length: 3300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Extraction: - Saw unit 120 mm - Lath grid 100 mm Workpiece support: - Sturdy plastic support for optimal stability, even for narrow workpieces. Tilting roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Godpfx Ajzzfr Eeayobt Feed: Manual, vertical and horizontal Circular saw blade: Diameter: 250 mm Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding guide rail: incl. workpiece support for narrow parts with strip stop Dust extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: immediate Location: 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1991, functionality: fully functional, power: 4 kW (5.44 HP), saw blade diameter: 315 mm, saw blade bore: 30 mm, total length: 5,200 mm, total height: 2,500 mm, overall weight: 800 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, stationary panel saw HolzHer, model 1265 with scoring saw, cutting length 4200 x 2200 mm. Godpfozzz D Rox Aayobt

Condition: good (used), Year of construction: 2007, Graule miter and crosscut circular saw Type: ZS 170 with a maximum cutting height of 170 mm sturdy cast iron construction precise ball bearing guide of the tool carriage on hardened and ground steel shafts manual saw feed quick miter adjustment up to 65° horizontally adjustable fixed stops lower saw blade guard can be connected to a dust extraction system Model: ZS 170 Motor: 400 Volt - 2.0 kW Gbedpfxszzf Dzs Aayst Speed: 3500 rpm Cutting length: 410 mm at 90 degrees Saw blade diameter: 420 mm Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: good (used), Maximum diameter of saw 400mm Gbjdperl Sknofx Aayet Maximum saw projection 133mm Crosscut capacity 90° 340 x 133mm Crosscut capacity 45° 290 x 133mm Height of work table 813mm Motor power 4.5Kw Speed of spindle 3000 RPM Spring return for saw unit DC brake

Condition: good (used), Year of construction: 2018, Well-maintained, semi-automatic bandsaw from MEP. Type: Shark 282 SXI evo Year of manufacture: 2018 Speed range: 36/72 m/min Saw band dimensions: 2950x27x0.9 mm Gsdezyvdijpfx Aayebt Total power consumption: 1.5 / 1.8 kW Machine weight: approx. 470 kg Cutting diameter: 250 mm Cutting capacity at 90 degrees: flat 280 x 220 mm Cutting capacity at 90 degrees: square 220 x 220 mm Cutting capacity at 45 degrees: flat 220 x 200 mm Cutting capacity at 45 degrees: round 230 mm Cutting capacity at 45 degrees: square 200 x 200 mm Cutting capacity at 60 degrees: flat 140 x 100 mm Cutting capacity at 60 degrees: square 100 x 100 mm Cutting capacity at 60 degrees: round 150 mm #

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Double mitre saw with 5 NC axes suitable for aluminium and light metal alloys, featuring automatic movable head adjustment and electronic control of all angles from 22°30' (internal) to 45° (external), with a fine-resolution of 280 positions per degree. The 600 mm saw blades offer two different feed modes. The standard feed optimises the cutting chart vertically for profiles taller than 450 mm. The radial mode utilises an extended stroke beyond the vertical reference plate, producing a large cutting chart horizontally for profiles up to 240 mm wide. Accessories: - Pro software package: Overlength / Shortcut / Cross-cut / Wedge cut - Pneumatic profile supports - Data import from external software (LogiKal / Schücal / MAP / TXT / Excel, etc.) Godpfx Aaoz Ady Dsyjbt - Additional clamps - Additional material support - Short part clamp for automatic and semi-automatic cutting - Additional clamp on roller conveyor - Motorised feed - Safety hood with adjustable opening width for improved noise and dust protection The saw has extremely low operating hours and cutting cycles! It is in excellent condition. Only 13,000 cuts and 900 operating hours! Twin-head cutting-off machine with 5 NC axes for aluminium and lightweight alloys, with automatic mobile head movement and electronic management of all angles from 22°30’ (internal) to 45° (external) with a resolution of 280 positions per degree. The 600 mm saw blades have two distinct feed modes. Standard feed optimises the cutting chart in the vertical direction for cutting profiles over 450 mm in height. The radial mode utilises a large stroke beyond the vertical reference plate, generating a large cutting diagram horizontally for profiles up to 240 mm wide.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.5 kW (12.92 HP), cutting height (max.): 260 mm, cutting width (max.): 260 mm, total height: 2,130 mm, total length: 1,670 mm, total width: 2,080 mm, overall weight: 2,200 kg, table height: 950 mm, Equipment: documentation/manual, lighting, A fully hydraulic production band saw machine, with a vertically running saw band, for 90° cutting of profiles, thin-walled and solid materials in all grades, including hard-to-machine materials such as Titanium, Hastelloy and Inconel. The standard Kasto Basic Control system provides optimal machine operation. Up to 99 programs can be programmed (length/quantity combinations). After the specified number is reached, the machine automatically shuts down. Precise material length positioning of the material feed unit via a ball screw. Frequency-controlled drive 5.5 kW, 0-start, protection in case of band saw breakage and clamping force control are part of the standard equipment and guarantee perfect operation for both single cuts and small to medium-sized series. The KASTO Universal Hydraulics ensures the best cutting results and a long service life of the band saw. Suitable for use with bi-metal and carbide band saws. Cutting capacity, round [mm] 260 Cutting capacity, square [mm] 260 Cutting capacity, bundle width [mm] 150-260 Cutting capacity, bundle height [mm] 0-200 Smallest cutting dimension [mm] Ø 10 Smallest cutting short length [mm] 5 Clamping range [mm] 0-260 Length [mm] 1,670 Width [mm] 2,080 Height [mm] 2,130 Bed height [mm] 950 Weight [kg] 2,200 Total drive power [kW] 9.5 Godpfozz Ih Nox Aayjbt Power of saw motor [kW] 5.5 Automatic material feed length, single [mm] 600 Maximum material feed length [mm] 9,999 Minimum remaining piece length during manual operation [mm] 10 Minimum remaining piece length in automatic operation [mm] 110 Cutting speeds (infinitely adjustable) [m/min] 15  125 Cutting feed infinitely adjustable Material clamping hydraulic, infinitely adjustable Saw band guidance by carbide, replaceable Clamping force: Horizontal main clamping clamp (Sp I) [N] 1,100  6,800 Horizontal material feed clamping clamp (Sp II) [N] 1,100  6,800 Saw band dimensions [mm] 4115 x 41 x 1.3

Condition: used, Year of construction: 1999, total height: 1,800 mm, total length: 5,700 mm, total width: 2,300 mm, Colour: White Weight: 2.000 kg - Year: 1999 - Documentation available: No - CE certificate present: No Gbodezmxvzepfx Aayst - Serial number: 10.7488 - Main motor power [kW]: 6.3 - Max. saw length [mm]: 5200 - Max. saw width [mm]: 360 - Max. saw blade diameter [mm]: 600 - Input table length [mm]: 5200 - Output table length [mm]: 3300 - Options: Automatic pusher system - Transport dimensions: 5700mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2010, functionality: fully functional, cutting length (max.): 100,000 mm, feed length X-axis: 5,050 mm, saw blade diameter: 550 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,800 kg, The Twin Electra 550 is a double mitre saw with 3 axes and an automatically adjustable saw head on linear guides. Electronic control of all mitre angles via a brushless motor, from 45° (inward) to 22°30’ (outward), with a precision of 240 positions per degree. – Connection to window manufacturing software (orgadata / Unilink / Wictop... etc.) is possible. The machine features the following equipment: - Industrial PC with Windows - Additional clamping device on the roller conveyor - Automatic profile support - Shortcut function - Overlength cutting - Crosscut - Automatic cutting - Connection to external software is possible (Orgadata, Unilink, Wiktop... etc.) Gbsdsz Adxgspfx Aayst

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, overall weight: 1,900 kg, Emmegi Twin Electra 500 double miter saw with 3 CNC-controlled axes Cutting length 5000mm - longer in automatic mode, with automatic repositioning of the saw up to 10000mm Overhauled/like-new double miter saw with saw blades D=500 mm The machine can be motor-driven to swivel from 135 to 22.5 degrees and has a cycle control system. Software options for short cuts, macros, overlength cuts, crosscuts and cycle cuts are also available for this machine. Data transfer is possible (Orgadate, Schücal, etc.) Accessories: Moving roller conveyor, tensioner on roller conveyor, automatically extendable profile support between the heads. Gbjdpfjz Adywjx Aayst

Year of construction: 2019, operating hours: 82 h, condition: used, empty load weight: 175 kg, Weight: 175 kg Godpfjzzf A Djx Aayobt Year of construction: 2019 Operating hours: 82 Condition: Good condition Price: € 900,- ex VAT

Condition: good (used), Fully automatic band saw from Imet Type BS 400 60 AFi-NC Gsdpezz Rpijfx Aayjbt Year of manufacture 2013 Capacity ø 310mm Single-sided miter cut max. 60 degrees Material selector switch

Condition: excellent (used), Year of construction: 1979, Still in very good condition, this bandsaw is made by the renowned manufacturer Hema. Roll diameter: 800 mm. Gbsdpfxezz Apnj Aayot