Used Sbs 8 70 for sale (45,435)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Hpsdpfx Aov A Hhhjb Uea Weight 29 kg Total power requirement 0,25 kw

Condition: excellent (used), Here we offer you Thermotron environmental test chamber. Thermotron Environmental Test Chamber Water Cooled Working volume: 227 liters Temperature uniformity: All models 0.7°C Temperature range: -70°C to + 180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx 400 kg Internal dimensions width 610 mm x depth 610 mm x height 610 mm Outer dimensions width 890 mm x depth 1240 mm x height 1850 mm Humidity range: All models 10% to 98% RH Humidity control: All models 2.5% RH Heating capacity in minutes -65º to 71ºC: 17 Heating power in minutes -65º to 180ºC: 43 Heating power in minutes -40º to 85ºC: 16 Electrical requirements in full load amplifiers 230/3/60: 19 Electrical requirements in full load amplifiers 230/1/60: 25 Electrical requirements in full power amplifiers 220/1/50: 27 Cooling capacity in minutes 85º to -40ºC: 32 Cooling capacity in minutes 71º to -65ºC: 54 Cooling capacity in minutes 180º to -65ºC: 72 Compressor size: (2) -2 Hp Operating voltage: 400V 16.7 A Type: SM-8-8200 Hpsdpfsmhfr Iox Ab Uea Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Type of construction: stationary - 3 pieces roller bearing Ø 35 mm - roller width 18 mm - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm Hpodpfjiv Irlex Ab Uea dead weight: 65 kg good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 16,500 h, load capacity: 8,000 kg, lifting height: 8,000 mm, fuel type: diesel, mast type: triplex, motor manufacturer: Deutz, fork length: 2,400 mm, tire condition: 80 %, overall weight: 16,500 kg, Equipment: adjustable boom, cabin, head guard, lighting, pallet forks, retractable fork, sideshift, trailer coupling, SPECIAL DESIGN LIFTING HEIGHT 8 meters !! we are offering: FRONT FORKLIFT, FORKLIFT, DIESEL FORKLIFT, ready to drive !! Total weight approx. 15 tons !! RX 70-80 4-wheel diesel forklift used Year of manufacture 2016 Offer is aimed at tradespeople, dealers, public and church institutions! Please only serious inquiries!! We are offering items from various acquisitions, which we describe as best as possible and provide meaningful photos. Further information about the item cannot be provided. Due to time constraints, we can only offer answers to this article if you provide us with a telephone number with your inquiry. Unless expressly described, this offer is used goods. Item is ready to drive with signs of use. Existing defects can be discussed by telephone All offers from stock 47441 Moers. Manufacturer: STILL Type: RX 70-80 Load capacity 8000 kg Lifting height 8000 mm Fork adjustment device (double) Fork length 240 cm, double pair of forks Year of manufacture 2016 Hours: approx. 15,000 per forklift Weight: 15 tonnes per forklift Fork adjustment device Full cabin Height 4000 mm For data see photos. Other industrial trucks in stock!! We offer the possibility of viewing on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by arranging an appointment by telephone. Hjdpfxevq I I Eo Ab Uepa If required, the item can be taken away immediately. All dimensions are approximate Other offers from catering, storage technology, trolleys The following applies to all offers: All information is subject to change - photos are similar!!

Condition: used, Ground cable for shielding gas device, electrode device, stud welding device -Welding cable: extension / connection cable -Length: 10.0 m -Connector: 14/8-pin, see photos -Cable coupling: DIX SK 70 Hodpfeutuv Rex Ab Uopa -Transport dimensions: 460/450/H80 mm -Weight: 9.2 kg

Condition: new, GMN for Schaudt Mikrosa TSE 70 c x 25 TSE 70c - 25/8 spindle SN: 378503, unused in opened original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hsdpenvyh Nofx Ab Uspa

Year of construction: 2018, condition: like new (used), functionality: fully functional, little used round cycle plant with 8 stations TECHNICAL DETAILS diameter machine bed: approx. 5000 mm weight: approx. 42 t Machine color: RAL 7035 light gray / base RAL 7016 anthracite Documentation: according to SEMA standard in German incl. CE marking on CD Hinged belt conveyor / cutter pump: built into base frame with hopper Lifting pump: 550 l/ min make KNOLL Coolant: 2500 I, 500 l/min (4 bar) EQUIPMENT - complete machine base frame - rotary table RTT 1200 NC controlled - rotary feed-through for the hydraulic supply - 8 x triple clamping devices externally mounted: 2 hydraulic three-jaw chucks each with integrated cylinder (clamping force: 40 kN/ 40 bar) - coolant tank system with pump for flushing - 14 lubrication points, piping and valves (lubricant: emulsion) - paper belt filter make KNOLL STATIONS Station 1: Feeding and unloading by robot - The part is clamped on the shaft. Station 2: Turning of the head contour (2-fold) - NC- feed slide SL 45-NC z-direction - 2 x facing unit SEMA PDE (without tools) spindle distance: 300 mm - 2 x facing head LAT-160-2-32 Station 3: Turning station via handling gripper (2-fold) - Part is now clamped at the machined head Station 4: Thread rolling (2-fold) - part is clamped at the head and supported in the hexagon - NC- feed slide SL 45-NC z-direction - 2 x spindle unit SEMA SE 100 (without rolling head and rollers) - 2 x torque support by hexagon socket - counterpart is inserted, turned to stop and disconnected Station 5: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 6: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 7: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 8: Thread deburring with deburring ring - 2 x spindle unit SEMA SE 55 (without tools) - NC- feed slide SL -NC z-direction - complete pneumatics make FESTO incl. piping - complete hydraulics make BOSCH/Rexroth or Parker incl. piping - central lubrication system make SKF incl. piping - swivel control panel with control panel front OP010C/PCU50 and keyboard - Control panel with control make SIEMENS 840 D-S7/ 24 NC axes Hpsdpfxonfvyms Ab Usa - NC program for one workpiece - Complete cover with sliding doors (partially transparent) - pedestal

Condition: good (used), Lubricating bolt for rope pulley, steel rope pulley, rope deflection pulley, crane rope, four-rope orange peel grapple, polyp grapple, mechanical orange peel grapple, shell grapple, ship unloading grapple, scrap grapple, garbage grapple, rope grapple, digging grapple, bolt crane bolt, lubricating bolt -Grease bolt: crane bolt type d=90x2 8 M48 -Shaft: Ø 69.5 mm .: 1031 4143 Hjdpfsv Iknijx Ab Uopa -Number: 5x crane bolts available -Price: per piece -Dimensions: Ø 90 x 248 mm -Weight: 6.9 kg/piece

Condition: used, Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, gearbox from scrubber drier 70 BF 70 -Mat. No.: 40S 11 001 -Bolt circle: Ø 90 mm -Transmission: i= 8:1 -Number: 2x gearbox available -Price per piece -Dimensions: 270/125/H125 mm -Weight: 4.7 kg/pc. Hpodpfxjkx Srij Ab Uoa

Condition: like new (used), Estimated stock: approx. 840 units. We are offering a second-class truss brace from the manufacturer SSI Schäfer for sale. Technical specifications for the truss brace: Shelf system: SSI Schäfer Type: PR 600 Included in delivery: 1x truss brace, second-class Material color: Sendzimir galvanized Total length: approx. 1,270.0 mm Center-to-center hole: approx. 1,230.0 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm Weight per unit: approx. 1.35 kg General information about the item: Hsdpfsh Eg Agex Ab Ujpa This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: used, Faceplate Hpedoddygdspfx Ab Uja Diameter 700 mm KKG 8 PCD 171 mm

Year of construction: 2007, condition: used, Used machine Used mobile piston compressor by ISC, model P-K 270/8/50 Serial No.: 2007/12 006769 Year of manufacture: 2007 Hpsdpfx Absxdpkwe Uoa Motor power: 1.8 kW Motor speed: 2850 rpm Volume flow: 270 l/min Maximum pressure: 8 bar Tank capacity: 50 l Availability: short-term Location: Solingen

Condition: used, Sheet metal width - 170 mm, Sheet thickness 8 mm. 80 x 10 mm, flat steel Steel bar cutting stencils for round D 20 mm and rectangular 20x20mm Knife length 170 mm. Sheet holding device Machine length 800 mm (1000 mm with moveable base) Hodpec Uqkcofx Ab Uepa Machine height 500 mm plus 560 mm for base Machine weight 255 kg,. on mobile base

Condition: used, Year of construction: 2011, travel -x axis 570 / 500 (1.070) mm travel -y axis 650 mm travel -z axis 530 mm control HEIDENHAIN iTNC 530 number of spindle speeds 12.000 U/min tool taper SK40 5-axis machining center | HEDELIUS - RS605 K IC equipped with tool changer, ITC (50bar), zero-point clamping system and chip conveyor. The machine only has 7.863h spindle hours. An extensive tool package is included. The machine is in a well-maintained condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. Hodpfxjwlvrao Ab Uspa - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RS605 K IC 40 | RS-605 | RS 605

Condition: ready for operation (used), Siemens 1PH6137-4CZ09 - Z spindle motor SN: EC584962701009 with 2CW8366-8 blower, Z= G51: prepared for encoder system, K02: grade S for single bearing mounting, K31: second end shield loose in terminal box, used, normal signs of use, 100% fully functional, delivery as per photos. ATTENTION: Please enquire for charges for packing and shipping separately! Hedpfx Absx Dvvmo Uspa

Condition: new, The SBS 1270/2 is a compact and robust folding machine from KNUTH, designed for versatility in the Folding Machines category and specifically within Manual Folding Machines. Ideal for bending thin sheets, its small footprint makes it suitable for limited workshop spaces while its segmented upper tool provides a wide array of bending possibilities. The SBS 1270/2 features an adjustable angle stop with a scale up to 135°, ensuring precise bending for producing small series. Additional specifications include a maximum plate thickness of 2 mm and a working length of 1,270 mm, allowing for efficient operation. It is equipped with a foot switch for hands-free clamping and a cam lock with rebound spring for effective counterbalancing. For those looking to enhance their sheet metal processing capabilities, the SBS 1270/2 offers an excellent solution. For more information, don't hesitate to request a quote today. Hpjdeuy H Utepfx Ab Usa

Condition: used, fuel type: diesel, first registration: 07/2005, Year of construction: 2005, Mini excavator Kobelco New Holland E70 – total weight 8,000 kg – engine power 40.5 kW – quick coupler system – CW10 – swing arm – leveling blade – Hedsxx S N Sepfx Ab Uopa = Additional information = Intended use: Construction Drive: Crawler Unladen weight: 7,950 kg Reference number: 7 Please contact Miguel Cubas for further information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels Hpjdpfx Asxvc N Djb Uoa 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: good (used), first registration: 06/2015, total length: 7,010 mm, total width: 2,550 mm, wheelbase: 4,630 mm, color: grey, Year of construction: 2015, Well-maintained 8-ton Kuiper low-loader with 2 axles, year of manufacture 2015. For further information or photos of this vehicle, please contact us at or or via WhatsApp! View our entire stock at . = Further Information = Weights Unladen weight: 1,740 kg Payload: 6,260 kg Hpsdpfxexlt Icj Ab Uoa Gross vehicle weight: 8,000 kg Functional Body manufacturer: Kuiper Wagenbouw Dieplader Loading platform height: 50 cm Maintenance APK (General Inspection): New TÜV on delivery Condition Technical condition: good Optical condition: good Damage: none Financial Information Price: On request = Company Information = Nidro Cars Holland is centrally located in the country and is your reliable partner for purchasing cars, vans, and trucks. The indicated price is the 'internet take-away price.' For questions or a test drive, please contact us: VIEW OUR ENTIRE STOCK AT All types of trade-ins are possible with us! (Our advertisements are created with great care, but no rights can be derived from their content.)

Condition: excellent (used), Year of construction: 2000, working width: 4,000 mm, distance between stands: 3,150 mm, table height: 970 mm, input voltage: 400 V, pressing force: 1,700 t, distance between side stands: 3,150 mm, type of input current: three-phase, working length: 4,000 mm, working range: 4,000 mm, Hydraulic press brake LVD PPEB-8 170/4000 CADMAN CNC Year of construction 2000 Serial number 27075 Technical specifications Force 1700kN Hjdpfx Ajvtz T Heb Uspa Working length 4000mm Distance between uprights 3150mm Stroke 200mm Distance table – ram 400mm Gap 400mm Width table 150mm Approach speed 100mm/s Working speed 12mm/s Return speed 130mm/s weight 13000 kg motor 22kW CADMAN CNC Y1,Y2,X duo,R, Z1 Z2, X’V • Table with center slot • Hydraulic clamping of toptool PP3100 • Hydraulic clamping on table • Clamping toptool PP3090 WILA • Crowning table V PP8170 • 2 fingers on back gauge • CE lasersafe PP5320 Tooling; • D10W. H196.78° 7 x 508mm + 1 x 550mm sections • V16 H90 78° 8 x 508mm

Condition: used, power: 202 kW (274.64 HP), fuel type: diesel, Year of construction: 2019, operating hours: 7,860 h, Technical information Make of engine: Komatsu Top speed: 40 km/h Empty weight: 26.750 kg Functional Lifting capacity: 18.900 kg Identification Serial number: H55681 Other information Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 9.35x2.91x3.47 Additional information Please contact PFEIFER GROUP for more information Hedou N Ulfepfx Ab Ujpa

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: RT7000-0-08-0-0000-1, Hot runner controller RT7000 8-zone Type: RT7000-0-08-0-0000-1 With color LCD and 7" touch control Outputs: 8x triac Inputs: 8x thermocouple Sensor plug: 1x HAN16A plug Heater plug: 1x HAN16A socket Hedpetz A Ecsfx Ab Uepa Sensor and heating separate Fieldbus: without Supply: 400VAC 3P 32 Display language in German and English For pin assignment, see enclosed documentation from page 15 onwards Dpbo8L INFO: New devices with a different number of zones available! If you are interested, we look forward to your inquiry!

Condition: used, Machine base soil tillage machine, floor cleaning machine, floor curing machine -Manufacturer: Minuteman, Multi-Clean machine base tillage machine -Type: 670691 UV-8 Power Supply -Voltage: 230V Hjdoqwpryjpfx Ab Uopa -Dimension: 600/440/H370 mm -Weight: 29 kg

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) Hodpfx Abjxvc Rzo Uepa 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: used, Sensor actuator distributor, distributor strip, interface, sensor actuator distributor, sensor actuator Hpedpfx Aehz Utyeb Uea -Manufacturer: Weidmuller, sensor-actuator-distributor ovp -Type: SAI-8-M 5P M12 170125 -Dimensions box: 175/65/H50 mm -Weight: 0.3 kg