Used Scm Si 320 for sale (653)

Condition: excellent (used), SCM Sintex XL Four-Side Planer Working width: 23-180 mm Working height: 6-100 mm Njdpfow Hbf Ijx Afwswk Number of spindles: 4 Spindle arrangement: Bottom: 7.5 kW Right: 5.5 kW Left Top Minimum length of workpiece: 300 mm Spindle diameter: 35 mm Feed speed adjustable by inverter: 4-12 m/min Technical documentation CE certificate

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Nwedpfovyuqfjx Afwek

Condition: new, - new -BeschreibungMit TERSA cutter block for sekundenschnelles HobelmesserwechselnTERSA-Hobelmessersystem ermögclear opening particularly geräuscharmen Lonangular verzahnte steel input roller for konstanten and gleichmäßigen HolzeinzugDie particularly langen Abrichttische aus einem piece ermöglichen leichtes Abrichten der WerkstückeGroßer surface fence kann beim opening der Abrichttische in seiner Position bleibenNach rear öffnende AbrichttischeDas hohe Maschinengewicht sorgt for höchste Präzision and ruhigen LonLeistungsstarker Industrie-motorRobuste steel-/GraugusskonstruktionArbeitstische aus Grauguss, nachgeglüht and spannungsfrei, dadurch unempfindlich and dauerhaft planarsurfacing table lip plates for geräuscharmen LonAusstattungsdetails:TERSA-HobelmesserwelleKein Einstellen and Schrauben mehrHobelmesserwechsel in SekundenSelbstarretierendBesonders low noisePerfektes HobelergebnisAbsaugschlauch-AnschlussDie suction nozzle der surface planer and thickness zeigen in the selbe Schlauchanschluss erfolgt from nur einer side wird kein Schlauch benötigt, der um the machine veStabil ausgelegter KettenantriebAntriebsräder aus steelMassiver GraugusslagerbockHobelwerkMassive Rückschlagsicherungen verhindern den kick-back from WerkstückenTERSA-Hobelmesserwelle with three Messern sorgt for ein optimales HobelbildDer MaterialeinzugSchrägverzahnte Stahleinzugswalzen for einen konstanten and gleichmäßigen Materialeinzug without AbdrückeMehreright hand Zähne greifen gleichzeitig for kraftvollen feederVerschleißfrei im Gegensatz zu GummieinzugswalzenTechnische Daten:dimensions and Gewichtelength (Produkt) ca.     2015 mmweight (Netto) ca.     330 kgwidth/depth (Produkt) ca.     990 mmdrive powercapacity driving motor     5 kWsurface planertotal length der tables     1800 mmchip removal max. surface planer     4 mmworking height     900 mmAnschluss Absaugungsuction nozzle diameter thickness     2 x 120 mmAufstellinformationenrequired space length     2015 mmMaschinenkörper width/depth     596 mmrequired space width/depth    1 460 mmworking dimensions length     1000 mmErläuterung required spaceDie dimensions berücksichtigen maximale Verfahrwege or Nutzläking dimensions width/depth     3500 mmMaschinenkörper length     659 mmErläuterung zu working dimensionsDie angegebenen dimensions bitte with dem required space addieren, um the for the machine empfohlene freie assembly area zu cknessDickentisch length     605 mmworking height thickness max.     230 mmDickentisch width     420 mmchip removal max. thickness     4 mmworking height thickness min.     3 mmElektrische DatenAnschlussspannung     400 VStromart     ACPhase(n)     3 PhNetzfrequenz     50 HzHobelmesserwelleHobelwellentyp     TERSAHobelwellendrehzahl     5200 min¯¹Hobelwellendurchmesser     72 mmplaning width max.     410 mmnumber of Hobelmesser     3 Stfeederfeed speed     7 m/minincluded in deliveryTERSA-Hobelmesserwelleeloxierter Aluminium-surface fenceNo. 550 3414 Nwjdpjvwga Hefx Afwjk

Condition: excellent (used), Panel saw 320cm Si5 Sliding table 320cm, Saw unit tilting 0–45 degrees Nedpjyt Ih Ujfx Afwswk Tilt and blade height adjustment are motorised, Rip fence on the right, motorised adjustment up to 1500mm, 2-axis scorer, electrically adjustable, 7kW motor, 3 spindle speeds Max. blade diameter 550mm, Angled sliding table with electronic displays Used machine, very good condition, Few hours of operation, Main saw has operated for 732 hours.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cutting height (max.): 90 mm, cutting width (max.): 3,800 mm, saw blade diameter: 380 mm, overall weight: 4,400 kg, cutting length (max.): 3,800 mm, main saw diameter: 380 mm, Beamsaw SIGMA IMPACT 90 (SCM Group) suitable for furniture panels precize cutting by one or more panels overlapped. Manufacturer: SCM Group Model: Sigma Impact 90 Production year: 2017 Cutting width: 3.800 mm Cutting depth: 3.200 mm Max. cutting height: 90 mm Front tables (air cushion): 1x 2.500x600mm, 3x 2.500x600mm Machine basement with air-cushion. Max. main blade diameter: 380 mm Scorer diameter: max. 300 mm PUSHER: brushless motor, max. speed 120 m/min ! SAW CARRIAGE: brushless motor, max. speed 150 m/min ! THK linear guides for the saw carriage movement. THK linear guides for the PUSHER movement. Automatic centralized lubrication of THK linear guides. Hi-Tronic kit: - main motor 15 kW (mode S6) - vertical movement of main and scoring blade by price ball-screws - optimized stroke of the main blade - electronic scorer adjustment in 2 axis (vertical, horizontal) - grooving with the main blade (electronic depth adjustment) - postforming cuts - window cut outs (blind cuts) - AKE flange for main and scoring blade Quantity of clamps (grippers): 10 pcs (maximum) Automatic exclusion of the clamp acting on the panels edge (up to 800 mm width). Start/stop pedal. Label printer. Control SW: WINCUT Optimalisation program: OTTIMO PERFECT CUT TOP (1x HW key) Control PC Eye-S: Windows + LCD touch screen 21" Air conditioning device for the electric box. Panel´s dimension automatic measuring. Laser line for the visualisation of the cutting line. Automatic double side aligner - motorized (60-2.200 mm). Nwedpfx Afex Nc Ayewjk Machine stat: fully working Possibility to see in actuall production. Availability: cca April 2026

Condition: used, Year of construction: 2011, WINCUT Numerical Control Working dimensions mm 3800 x 3800 Max blade projection (mm) 107 Front panel loading N. 10 pincers on the pusher carriage Lateral aligner Scoring group (max blade diameter / power) 160 / Kw 1,5 Main blade unit (max blade diameter / power) 380 / Kw 7.5 Adjustable speed of the blade carriage (m/min) 1 - 135 Pusher carriage speed 70 m/min N. 3 air curtain front benches TECHNICAL DETAILS TO CHECK WHEN THE MACHINE WILL BE IN OUR WAREHOUSES Njdpfx Aowwrywefwowk

Condition: ready for operation (used), Year of construction: 1996, SCM SI16N CE-compliant Sliding table: 3200 mm Cutting width to the right of the saw blade: 1250 mm Saw blade hydraulically raise and tilt Tiltable up to 45 degrees Saw blade diameter: 400 mm Saw blade bore: 30 mm Motor: 380 V, 50 Hz, 5.5 kW Speeds: 3000/4000/5000 rpm Scoring unit: Yes Upper dust extraction hood Extraction diameter: 80/120 mm Required space Length: 3550 mm Width: 2200 mm Height: 1500 mm Weight: 1000 kg Njdjy Sv R Aspfx Afwswk Year of manufacture: 1996 Functionality tested Available from early July Machine from training operation More photos coming soon

Condition: ready for operation (used), Year of construction: 1995, SCM Type Hydro 3200 CE - compliant Sliding table 3200 mm Cutting width to the right of the saw blade 1250 mm Nwjdpfx Afsy Sv Rpswek Saw blade hydraulic lifting and tilting Tiltable up to 45 degrees Saw blade diameter 400 mm Blade bore 30 mm Motor 380 Volt, 50 Hz 5.5 kW Speeds 3000/4000/5000 rpm Scoring unit Top dust extraction hood Extraction diameter 80/120 mm Space requirements Length 3550 mm Width 2200 mm Height 1500 mm Weight 1000 kg Year of construction 1995 Functionally tested Available from early July Machine from training workshop More photos coming soon

Condition: used, functionality: fully functional, SCM si12 panel saw Specifications: • Condition – used, after a comprehensive inspection • Manufacturer – SCM • Model – si 12 • Carriage length – 150 cm • Diameter of installed saw blade – 300 mm • Main saw motor – 3.0 kW • Saw blade can be tilted manually • Manual raising and lowering of the saw blade • Max cutting height – approx. 90 mm • Side table, dimensions: 85 x 60 cm • Dust extraction port – 100 mm diameter • Weight – approx. 450 kg • Overall dimensions: 350 x 150 x 100 cm (width x length x height) Nodpoza Hi Rjfx Afwowk • Dimensions for transport: 90 x 150 x 100 cm (width x length x height) Additional information: • The machine is in good technical condition and ready for immediate use. • The photos show the actual condition of the item being sold. • It is possible to turn on and inspect the machine on-site. • Free training on how to operate the machine is provided (at the company's premises). • The price listed in the auction does not include VAT and transport costs. Financing and transport: • We arrange transport using our MDD fleet, courier companies, or external carriers. • We offer financial support in the form of leasing or a leasing loan.

Year of construction: 2006, condition: ready for operation (used), USED AUTOMATIC PANEL SAW WITH FRONT LOADING Brand: SCM Nedjhkr A Sjpfx Afwowk Model: SIGMA IMPACT Year: 2006 CE compliance Useful cutting dimensions: 3200 x 3200 mm. Cutting height: 67 mm 3 air tables: one long and two shorter, wide tables 6 pneumatic clamps Main saw motor: 10 HP Scoring saw. PC with WINCUT software.

Condition: used, Year of construction: 2001, machine/vehicle number: AE/22614, functionality: fully functional, cutting width (max.): 4,500 mm, total length: 5,000 mm, total width: 7,000 mm, total height: 2,350 mm, cutting length (max.): 3,200 mm, SECOND-HAND PANEL SAW SCM MOD. SIGMA 65 - CE RULES - Cutting dimensions: 4500X3200 mm - Main blade projection: 65mm Nwsdpfxex Rvaze Afwek - N. 6 clamps - Saw carriage speed: 12m/min - Main blade diameter: 300mm - shaft diameter 80mm - Scorer blade diameter: 160mm - shaft diameter 55mm - Main blade motor: 5,5kW - Overall dimensions: 7000x5000x4350 - S/N AE/22614 - Year 2001

Condition: excellent (used), Panel saw SCM Si400e 9/24 Technical specifications: Carriage length: 3200 mm Electrically adjustable blade angle Electrically operated blade lifting Electric adjustment of right-side rip fence Nsdpfow Rkz Ssx Afwewk Cutting width right: 1270 mm Maximum cutting height: 130 mm Blade speed variable via belt Scoring unit speed: 6500 rpm Blade guard Emergency stop Main motor power: 5.5 kW Scoring unit motor power: 0.75 kW Overall dimensions: Height: 1400 mm Width: 4300 mm Length: 3550 mm

Condition: used, Year of construction: 2006, functionality: fully functional, Machine identification Model: SCM Sigma Plus 125 P 45 Type: heavy-duty panel saw with lifting platform Manufacturer: SCM Group S.p.A., Italy Serial number: AE/028708 Year of manufacture: 2006 (used machine) Condition: used industrial panel saw Main equipment / configuration Fixed, phenolic-coated front air cushion table with stop Three movable, phenolic-coated air cushion tables Pneumatic automatic alignment device Quick saw blade change system Independent main saw blade lifting THK precision linear guides Njdpoy Iwy Dofx Afwswk Four additional clamps in the right-angle alignment zone Optimized saw blade extension PC operator interface in English

Condition: used, Year of construction: 1995, functionality: fully functional, SCM si150 Panel Saw Specification: • Condition – used, after a comprehensive overhaul • Manufacturer – SCM • Model – si 150 • Sliding table length: 150 cm • Blade diameter: 300 mm • Machine equipped with a scoring unit • Main saw motor: 4.0 kW • Blade tilting: manual • Manual blade raising and lowering • Blade guard on spring support • Maximum cutting height: 95 mm • Side table dimensions: 85 x 60 cm • Extraction port diameter: 100 mm • Cart with wheels for machine relocation included • Weight: 480 kg • Year of manufacture: 1995 • Overall dimensions: 151 x 270 x 137 cm (W x L x H) • Transport dimensions: 151 x 125 x 137 cm (W x L x H) Nedpfjyy Sq Usx Afwjwk Additional information: • The machine is in good technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Testing and demonstration on-site available • Free training on machine operation (at company headquarters) • The auction price does not include VAT or transport costs Financing and transport: • We organize transport with our MDD fleet, courier services, or external carriers • Financing available through leasing or a lease loan

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: AA1/017825, functionality: fully functional, travel distance X-axis: 5,200 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 160 mm, number of axes: 5, number of slots in tool magazine: 12, TECHNICAL DETAILS Number of controlled axes, milling spindle: 5 Tool holder: HSK-F63 Type of milling table: Cross table Tool changer positions: 12 Working area, X-axis: 5,200 mm Working area, Y-axis: 1,550 mm Working area, Z-axis: 160 mm MACHINE DETAILS System/Software: SCM Maestro Vacuum pump Manufacturer: Becker Type: VTLF 2.250/0-791 Year of manufacture: 2014 Main motor power: 5.5 kW Capacity: 244 m³/h Negative pressure: 200 mbar Overall length: 9,000 mm Overall width: 5,000 mm Overall height: 3,100 mm EQUIPMENT Vacuum pump Becker VTLF 2.250/0-791 Nsdpfx Afozuwt Uewowk Manual control CNC documentation on USB stick Safety light curtain Safety fence CE certificate Documentation

Condition: used, machine/vehicle number: 008594, X axis working area: 3100 mm Y axis working area: 2200 mm Nwjdjzvwqvjpfx Afwjk Working Table: Flat table Main Electrospindle power: 8.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 18 Total number of tool changer positions: 20

Condition: used, machine/vehicle number: 008657, Max. panel width: 3200 mm Max. panel length: 3200 mm Nwsdpfx Afozvwnnowjk Main saw blade projection: 115 mm No of Grippers: 8

Condition: used, machine/vehicle number: 008659, X axis working area: 3000 mm Y axis working area: 900 mm Main Electrospindle power: 5.5 KW Nwsdpfezvwnhjx Afwok Number of controlled axes: 3 axes Total number of drilling spindles: 18

Condition: used, machine/vehicle number: 008507, X axis working area: 5020 mm Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of tool changer positions: 16 Nwedpjzvwnbsfx Afwok

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Nodpfx Aetwgirofwjwk Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 12

Condition: used, Year of construction: 2013, total width: 1,650 mm, total height: 1,750 mm, Colour: White Empty weight: 2.600 kg Dimensions (LxBxH): 415 x 165 x 175 cm Price: On request - Year: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AB - 216795 - Number of spindles [pcs.]: 5 - └ Spindle 1: Nwsdpfx Afszwuh Iowek - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 9 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 140 - Min. planing width [mm]: 25 - Max. planing width [mm]: 230 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Feed table length [mm]: 2470 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 3 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 120 - Options: Powered rollers in table - Feed speed: Automatic - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 25 - └ Feed speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 57 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 4150mm x 1650mm x 1750mm (l x w x h) - Transport weight [kg]: 2600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, total width: 2,400 mm, total height: 2,200 mm, Colour: White Empty weight: 6.000 kg Dimensions (LxBxH): 2000 x 240 x 220 cm Price: On request - Year: 2006 - Documentation available: Yes - └ Type Documentation: Electrical diagrams, Technical data - CE marking present: Yes Nwodpfx Aszwub Iofwok - CE certificate present: No - Serial number: AA1/015315 - Number of spindles [pcs.]: 8 - └ Spindle 1: - - Spindle type: Bottom - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Right - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Left - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Top - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 7: - - Spindle type: Top - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 8: - - Spindle type: Bottom - - Motor power [kW]: 11 - - Tool present: Yes - Max. planing width [mm]: 240 - Max. planing height [mm]: 140 - Feed table length [mm]: 2500 - Conveyor drive: Cardan drive - Lubrication system: Automatic - Options: Automatic outfeed system, Automatic feeding system - Feeding system: - └ Brand: H&M - └ Max. feed length [mm]: 250 - Outfeed system: - └ Brand: H&M - └ Max. output length [mm]: 760 - Transport dimensions: 20000mm x 2400mm x 2200mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 8 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2015, operating hours: 19,402 h, total height: 2,250 mm, total length: 2,500 mm, total width: 1,900 mm, Colour: White Empty weight: 1.600 kg Price: On request - Year: 2015 - Documentation available: Yes - └ Type Documentation: User manual, Electrical diagrams, Technical data, Operating system - CE marking present: Yes - CE certificate present: No - Serial number: AB/224221 - Operating hours: 19402 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 1 - - Max. spindle speed [rpm]: 18000 - - Main motor power [kW]: 5.6 - Type milling table: Flat table - Tool holder: ISO30 Nodpjzmvftofx Afwjwk - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 2.64 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 11 - Saw unit present: Yes - Tool changer positions [pcs.]: 0 - System/software: SCM Maestro - Safety feature: Door interlock switches, Safety light curtain - Tools included: Yes - CNC options: Barcode reader, Manual control - CNC documentation available: USB stick, User keys/licenses - Table length [mm]: 3960 - Table width [mm]: 840 - Working range X [mm]: 3050 - Working range Y [mm]: 900 - Z-axis working range [mm]: 60 - Voltage [V]: 400 - Current consumption [A]: 35 - Fuse [A]: 63 - Power [kW]: 10.0 - Installed length [mm]: 4500 - Installed width [mm]: 1900 - Installed height [mm]: 2250 - Transport dimensions: 2500mm x 1900mm x 2250mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, total width: 1,550 mm, total height: 1,500 mm, Colour: Grey Empty weight: 2.100 kg Dimensions (LxBxH): 325 x 155 x 150 cm Four-sided moulder Nwsdpfx Afswnhk Tjwok SCM Compact 23K Built in 2002 Min/max working height 120mm Min/max working width 230mm Working speed 6/12 m/min Spindle speed 6000 Rpm Spindle diameter 40mm Min/max tool diameter vertical spindle 100/180mm Input table length 2500mm CNC Program Engines 1st Spindle - Under 5.5kW 2nd/3rd Spindle - Left/Right 11kW 4th Spindle - Up 7,5kW Dimensions 3250x1550x1500mm (LxWxH), Weight 1800kg - Year: 2002 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 3250mm x 1550mm x 1500mm (l x w x h) - Transport weight [kg]: 2100kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2012, number of axes: 5, working width: 1,240 mm, working length: 3,060 mm, Equipment: CE marking, TECHNICAL DETAILS Machining process: Drilling, Milling Working area X-axis: 3,060 mm Working area Y-axis: 1,240 mm Max. panel thickness: 200 mm Number of working areas: 2 Table type: Flat table Table design: Nesting Table length: 3,060 mm Table width: 1,240 mm Number of controlled axes: 5 Drilling unit Number of drilling units: 1 Installation position: Top Vertical drilling spindles: 12 Horizontal drilling spindles X-direction: 4 Horizontal drilling spindles Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Number of milling spindles: 1 Installation position: Top Controlled axes: 5 Spindle cooling: Liquid cooling Grooving unit Number of grooving units: 1 Installation position: Top Nodpfx Afozmvqvjwjwk Design: Fixed grooving unit Grooving direction: X-direction MACHINE DETAILS Power of main electrospindle: 8.5 kW Power of milling spindle motor: 8.5 kW Control system: PC Control Programming software: Xylog Plus Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h EQUIPMENT CE marking Front safety mats 16-position tool magazine on the machining head Automatic tool changer Vacuum suction cups for workpiece fixing The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6487