Used Servo Drive for sale (23,952)

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type HG OKG 71N4 -Speed: 246 rpm -Power: 0.37kw -Torque: 14.4 Nm -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 400/170/H210 mm -Weight: 15kg Pedpfx Ashvtcmebgjpu

Condition: excellent (used), Interroll roller conveyor 0.99m with drive The Interroll roller conveyor element is in a very good condition. Furthermore, the roller conveyor has its own drive motor. Width: 400mm Length: 990mm Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Psdpfx Aehvmi Tsbgopu Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 500 kg, lifting height: 1,410 mm, free lift: 1,350 mm, fuel type: electric, mast type: mono, construction height: 1,770 mm, battery capacity: 9 Ah, battery voltage: 48 V, battery weight: 9 kg, fork length: 1,200 mm, fork width: 540 mm, empty load weight: 220 kg, total height: 1,770 mm, total length: 1,640 mm, total width: 780 mm, color: blue, Equipment: CE marking, full service history, VANLIFT is a unique piece of logistics equipment in the cargo-handling sector, allowing for the loading and unloading of pallets up to 500 kg into and out of both light commercial vehicles and heavy-duty trucks. It allows for safe and instant loading. No additional help or equipment is required. It can be transferred between vehicles. Significantly reduces downtime and loading time. Its use does not take up significant weight or space. VANLIFT is a groundbreaking development in the material-handling market. On its own, it can offer a more efficient solution than all currently available similar products. Podpfxey S S Drs Abgjpu

Condition: like new (used), Year of construction: 2024, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: QYKM-1400x2900, total height: 3,200 mm, total width: 4,300 mm, total length: 7,600 mm, overall weight: 2,500 kg, Equipment: documentation/manual, We are selling our as-new pizza box machine due to business closure. The machine was ordered from China. It is nearly new and operates flawlessly. All components are fully functional. Coating can be applied at any time. Ppjdpfx Abexvy Hmogju

Condition: new, Board separator conveyor Outfeed after HewSaw Manufacturer / model: Drive experts UK CA Type: 3E100L4D-FC-A0-D36 Power: 3.0 kW RPM: ~1450 rpm (50 Hz) Ppsdpfjyknpmox Abgsu ~1750–1760 rpm (60 Hz)

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 71971, total length: 3,070 mm, total width: 2,425 mm, product height (max.): 350 mm, roller width: 950 mm, production capacity: 5,000 unit/h, Automatic shrink wrapping machine with continuous side sealing! Pedpfx Abezdkr Njgspu TECHNICAL DETAILS Maximum production capacity: 5,000 units/hour Product dimensions Product height: max. 350 mm Product length: variable Film/roll dimensions Maximum film roll width: 950 mm Maximum film roll diameter: 350 mm Suitable films: Polyolefin, PVC, polyethylene, and polypropylene Sealing unit Sealing bar length: 820 mm Sealing system: continuous side sealing Transverse sealing bar: with PTFE coating MACHINE DETAILS Operation: 7" color touchscreen Operating modes: automatic and manual Control: integrated PLC control Production counter integrated Total power: 3,850 W Power supply: 380 to 415 V / 3 phases + N + PE Power consumption: 15.5 A Dimensions & weight Dimensions (L x W x H): 3,070 mm x 2,425 x 1,765 mm Machine weight: 1,140 kg EQUIPMENT SMIPACK T852H shrinking tunnel Continuous side sealing with hot knife Transverse sealing bar with PTFE coating Electronic temperature control Automatic film tension control Automatic adjustment of product spacing Electronic speed regulators Color touchscreen with extended user interface Integrated PLC control Production counter Diagnostic system for malfunctions Parameter monitoring Foldable top cover for quick maintenance Motorized, synchronized conveyor High-quality guides and rollers Industrial control buttons from Lovato Access to the sealing area for cleaning and adjustment Suitable for polyolefin, PVC, and special films

Condition: excellent (used), Year of construction: 2021, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: B&R, Servo geared motor 8GP40-LSA35-00244 -Motor: Type 030S000-3 Podpsxt Dx Usfx Abgjpu -Voltage: 400 V -Speed: 3000 rpm -Gearbox: 8GP40-080- -008S2L3 i=008 -Shaft: Ø 20 x 35 mm -Dimensions: 308/90/H133 mm -Total weight: 5.8 kg

Condition: good (used), Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Drive rings: for attachment milling mandrel, 19 pieces -Type: Ø 13 to 40 mm -Quantity/Size: see photos / parts list -Submission/Price: complete -Transport dimensions: 200/120/H80 mm -Total weight: 4.4 kg Ppsdpfx Aezhkxksbgeu

Condition: used, Year of construction: 2015, Year of manufacture: 2015 Part suitable for: Trucks, Semi-trailers Technical condition: good VAT/Differential tax: VAT deductible Part number: Axles Podpfsyudk Iex Abgspu

Year of construction: 2022, condition: good (used), Railcar, platform wagon, heavy-duty transport wagon, transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon, trailer -Manufacturer: Plan, railcar with 48-volt drive and battery -Type: EGB 50 -Platform: 4640 x 2000 mm -Load capacity: 50,000 kg -Drive: with 48-volt electric geared motor -Track width: mm Podpfxeytt Nqs Abgepu -Wheel arch width: mm -Dimensions: 2000/4640/H770 mm -Empty weight: 4140 kg

Condition: new, “Partially unpacked for photography – unused item from warehouse liquidation” Podozhny Sepfx Abgspu Quantity: More than 10 available Steinmeyer ball screw 3526.512/25.40.728.1122 P5P Manufacturer: August Steinmeyer GmbH & Co. KG Component: Ball screw / ball screw spindle Type: 3526.512/25.40.728.1122 P5P Accuracy class: P5P Design: Ball screw spindle with nut Condition: new, original packaging Packaging: Wooden crate with protective packaging Application: Precise linear movements in machine tools, automation systems, and CNC systems Location: Altenglan

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Ppjdpfxozdny Ro Abgju Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: Siemens Wittenstein, servo geared motor -Synchronous motor: Siemens type 1FK7101-2AF71-1RG0 -Voltage: 278 V Pedpfx Abeyh Huyogspu -Gearbox: Wittenstein SP 100S-MC1-3 -1K1-2K i= 3 -Shaft: Ø 32 x 55 mm -Protection class: IP64 -Number: 3 servo motors available -Price: per piece -Dimensions: 450/190/H255 mm -Weight: 33 kg/pc.

Condition: ready for operation (used), Year of construction: 2018, pressing force: 224 t, stroke length: 265 mm, total width: 1,700 mm, total height: 2,900 mm, overall weight: 14,750 kg, travel distance X-axis: 650 mm, product length (max.): 5,250 mm, number of axes: 8, This 8-axis Durma AD-SERVO 40220 was manufactured in 2018. It features a pressing force of 220 tons and a bending length of 4,050 mm. The machine is equipped with a Delem DA-66T Touch CNC control for precise operation. If you are looking to get high-quality bending capabilities, consider the Durma AD-SERVO 40220 press brake we have for sale. Contact us for further details. • Distance between side frames: 3,600 mm • CNC axes: Y1, Y2 (ram); X (backgauge depth); R (backgauge height) • Installed axis options per configuration: Z1, Z2 (independent left/right finger positioning); Delta-X (independent right-hand finger offset ±125 mm) • Approach speed: 160 mm/s • Bending speed: 12 mm/s • Return speed: 180 mm/s • Daylight opening: 530 mm • Table width: 104 mm • Working height: 900 mm Podpfxezhn Eze Abgopu • Throat depth: 410 mm • Backgauge fingers: 2 • X-axis travel/speed: 650 mm / 250 mm/s • R-axis travel/speed: 250 mm / 140 mm/s • Main motor power: 2 × 7.5 kW • Hydraulic oil capacity: 80 l • Control: Delem DA-66T touch CNC with 2D graphical programming • Crowning: CNC crowning system • Tool clamping: Eurostyle upper tooling clamping; 60 mm lower die holder • Supports: Two front support arms with T-slot and flip-stops, laterally adjustable on linear guides • Safety: Fiessler AKAS II M-FPSC_B_C safety PLC with manual operation; CE compliant • Other: Hydraulic oil included • Resulting CNC configuration (with installed options): Y1, Y2, X, R, Z1, Z2, Delta-X Additional equipment • Tooling: V12 lower die set and 30° upper blade set (included) Technical Specification Bending Length 4050 mm

Condition: excellent (used), Ifsys Ppsdszd Rk Eopfx Abgeu Type: 114100 Type: VL 13 Servo press Hopper system with 2 x Vibroliner and 2 x Vibrohopper 1 x return conveyor belt 2 x control unit FC 1000 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), functionality: fully functional, Filling heads: 8 volumetric filling heads Filling volume: 5 ml - 5,000 ml Ppodpfx Abszfpq Tegou Capacity: 30 - 100 bottles per minute Suitable for pharmaceutical, chemical, and food products.

Condition: new, Ball screw KGT 32X20RX3.969 R030443037 Bosch Rexroth Podpfxszg Iide Abgopu “Partially unpacked for photography – unused item from inventory clearance.”

Condition: new, “Partially unpacked for photography – unused item from a warehouse clearance.” Ball screw drive Dm40x30 Ppedpozg Ihtsfx Abgju Stroke 500mm Steinmeyer

Condition: new, “Partially unpacked for photography – unused item from a warehouse clearance.” Ball screw drive DM50, stroke 600, Pedpfx Abjzg Iflsgspu pitch 30mm 13:96 393/11 00000 STEINMEYER

Condition: like new (used), Stirrer drive, electric motors, stirrer drive Pjdswyf Tvepfx Abgspu Manufacturer: Turbo Rührwerke Stirrer type: NFLE750 KAF90 A005258/1 Motor type: KAF97 Motor power: 15kW Stirrer speed: 77 rpm Stirrer length: 1250mm See our other listings.

Condition: like new (used), Stirrer drive, electric motors, stirrer drive Manufacturer: Turbo Rührwerke Stirrer type: NFLE750 KAF90 A005258/1 Motor type: KAF107 Motor power: 15kW Stirrer speed: 45 rpm Stirrer length: 2700mm See our other listings. Pedpfjwyf Rbsx Abgepu

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 4,723 h, load capacity: 2,000 kg, lifting height: 4,765 mm, free lift: 1,700 mm, fuel type: gas, mast type: triplex, construction height: 2,160 mm, fork carriage width: 980 mm, fork length: 1,100 mm, empty load weight: 3,416 kg, drive type: Treibgas, LPG Forklift Load centre: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Very good Ppedpezdl Dmjfx Abgsu Front tyre type: Non-marking Front tyre size: 200/50-10 Rear tyre type: Non-marking Rear tyre size: 18x7-8 Description: In addition to this machine, we offer further forklifts and warehouse equipment. All our units are workshop-inspected and certified according to FEM 4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we will also buy your used equipment, even if you do not purchase a machine from us. Lease-purchase and financing options available upon request at attractive rates. We are happy to offer expert and detailed advice on our vehicles. Specifications: Side shifter, 3rd hydraulic valve, rear work light, front work light, heater, load guard, full cabin, full free lift, safety light, non-marking tires, interior mirror, joystick, beacon, windscreen wiper, single pedal, LED, seat.

Condition: new, Ball screw drive Dm63 Ppjdpfx Abszgg Eqegou Stroke 630 PITCH 20MM 13:40 879/11 00000 Steinmeyer 2 units available “Partially unpacked for photography – unused item from stock clearance.”

Condition: new, Ball screw drive ø40mm, Stroke 600mm, Pitch 25mm Ppsdezgf Drepfx Abgsu 13:96 427/11 00000 STEINMEYER Partially unpacked for photography – unused item from warehouse clearance.

Condition: new, Ball screw Ppedpfx Abjzgf Dljgju ground ø 63 PITCH 20MM 13:52 772/11 00000 Partially unpacked for photography – unused item from warehouse clearance.