Used Setting Tool for sale (41,586)

Year of construction: 2021, condition: like new (used), Required air-pressure 7 bar weight 3 kg dimensions of the machine ca. 212 x 265 X 200 mm BxHxT Air Operated Diaphragm Pump Type(s) DL15-PM-TTT Technical data: - Connection size medium - 1/2" BSPT female thread - Material housing - PP polypropylene - Center section - PP polypropylene - Diaphragm material - PTFE - O-ring material - PTFE - Check valve material - PTFE - Max. flow rate - 2.2 m³/h Hsdpfeul Edvjx Acrjl - Max. medium pressure - 7 bar - Compressed air supply - up to 7 bar - Solid size max. - 2.5 mm - Dry suction max. - 2.5 m - Dimensions WxHXT - 212 x 265 X 200 mm - Net weight - 3.5 kg PTFE diaphragm for the highest chemical requirements, very good resistance to aggressive media and chemicals, temperature range: -5 °C - +130 °C. PP polypropylene housing is highly resistant to acids, many water-soluble, inorganic acids and bases. Also available as electrically conductive housing material. Temperature range: 0°C - +60°C

Condition: like new (used), Year of construction: 2008, amount 1 STK Hedpfsuayf Aex Acrsl

Condition: like new (used), Year of construction: 2008, amount 1 STK Hodpsxgvy Rsfx Acrjl

Condition: like new (used), Year of construction: 2008, amount 1 STK Hodpfxjxgvy Dj Acrsl

Condition: like new (used), Year of construction: 2008, amount 1 STK Hsdpfxeuaydlj Acrel

Condition: good (used), 1 used MIG MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Hedpfx Acoy Hfwnorsl Weldable wires steel [Ø mm]: 0.6 - 1.6 Weldable wires stainless steel [Ø mm]: 0.8 - 1.2 Weldable wires aluminium [Ø mm]: 1 - 1.6 Weldable wires CuSi [Ø mm]: 0.8 - 1.2 Voltage adjustment: stepless MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Weldable electrodes [Ø mm]: 1.5 - 8 Electrode duty cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 General specifications Open-circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Power supply: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Mains fuse 3~ (50/60 Hz) [A]: 32 Max. positive mains tolerance 3~ (50/60 Hz) [%]: 15 Max. negative mains tolerance 3~ (50/60 Hz) [%]: 15 Power plug: CEE 32 Standards and certifications Protection class: IP32S Insulation class: F Standard: EN 60974-01 Markings/Certifications: CE, S Cooling type: Gas-cooled, water-cooled Cooling Standard cooling capacity (l/min) [kW]: 1.06 Tank capacity [l]: 4.3 Dimensions (L x W x H) [mm]: 880 × 490 × 885 Case dimensions (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 75385, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 80 mm, spindle speed (max.): 2,500 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect within the period from 23.06.2026 to 26.06.2026! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Hsdpfx Acey D Swierel Travel Z-axis: 400 mm Spindle speed: 50 - 2,500 rpm Feed rate X/Y/Z-axis: 5 - 1,000 mm/min Rapid traverse X/Z-axis: 4 m/min Rapid traverse Y-axis: 2 m/min Tool holder: ISO 40 Quill stroke of horizontal and vertical working spindle: 80 mm Table dimensions: 730 x 410 mm Number of T-slots: 8 MACHINE DETAILS Control: HEIDENHAIN TNC 135 Operating voltage: 380 V Frequency: 50 Hz Connection rating: 10 kW Rated current: 50 A Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,100 x 2,200 mm Machine weight: 2,000 kg EQUIPMENT Workshop drawer cabinet with SK 40 holders Clamping devices External reference: 13

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 1616, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 450 m/min, spindle speed (max.): 2,500 rpm, No reserve price - guaranteed sale to the highest bidder! Placing a bid commits you to collect the item within the scheduled period between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Travel X-axis: approx. 300 mm Travel Y-axis: approx. 300 mm Travel Z-axis: approx. 300 mm Spindle speed range: 40 to 2,500 rpm Table dimensions: 600 x 210 mm Number of feeds: 16 Feed rates: 28 to 450 mm/min Number of slots: 4 Tool holder: SK 40 MACHINE DETAILS Hsdpfx Aoy D Shnecrsl Dimensions & weight Dimensions (L x W x H): 2,000 x 1,200 x 1,700 mm Machine weight: 1,000 kg EQUIPMENT Mounted vice (jaw width: 110 mm) Set of tool holders Milling cutters Collets Three-axis digital readout (manufacturer: FAGOR) External reference: 10

Condition: not inspected (used), functionality: unexamined, total width: 300 mm, total height: 1,000 mm, total length: 1,000 mm, overall weight: 70 kg, drive type: akkubetrieben, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Type of operation: Battery-powered MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,000 x 300 x 1,000 mm Weight: 70 kg EQUIPMENT Strapping band External reference: 6 Hodpfx Acey D Sfmjrol

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Active – TNC 111 Digital Readout by Heidenhain, incl. Accessories, Excellent Condition Technical Data: >> Year of manufacture: 1979, Machine No. 2202-10512 >> Fixed angle table >> Spindle speeds: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable 150 mm on spindle carrier >> Vertical and horizontal quill – SK40 extendable >> Drawbar system M16 >> Weight approx. 1400 kg Equipment and Accessories: >> 3-axis TNC 111 Active digital readout by Heidenhain >> Coolant system >> Central lubrication >> 1 accessory cabinet containing: Collets, tool holders, clamping tools, tailstock, Dividing head with 3-jaw chuck, vise, tailstock, indexing plates, and much more About the Machine: Hjdpfx Acey H Ibcerol For sale is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a state-operated laboratory where it saw only minimal use. It includes an accessory cabinet with a wide range of tools. The machine has very little backlash, and all spindles move smoothly. The geometry is outstanding. Even at maximum spindle speeds, the milling machine runs quietly. On this newer FP2 model, the feed on all three axes is continuously adjustable and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain digital control, set dimensions can be entered and the machine will automatically travel to these positions. An oil change has been carried out. The machine has been mechanically and electrically checked. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test the machine under power on site.

Condition: new, functionality: fully functional, Warehouse clearance of industrial accessories Specialized in spare parts for machine tools, CNC machining centers Siemens 8m, 850, 840C, 840D, Siemens NC motors Rexroth hydraulics and linear motion technology Festo pneumatics, Herion pneumatics Parker hydraulics Brinkmann pumps, pumps from various manufacturers Heidenhain measurement systems, ROD and linear measurement systems Coax coolant valves and sensors Balluff switches and sensors Phoenix Contact Römheld clamping devices Gerwah couplings HSK100, HSK63 tool holders Renishaw ABB Hodpfx Acey Ibgzorel Round sealing rings, Turcon Glyde seals Wickmann + Siemens fuses Euchner switches, Honeywell limit switches And much more... (not everything is shown in the pictures) Workbenches, drawer cabinets, heavy-duty shelving Final sale price with moderate asking: €950,000 Collection only

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Spindle hours: 13,465 Hjdpfx Ajwbi A Djcrol - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

Condition: new, Year of construction: 2026, machine/vehicle number: 20251112018, fuel type: diesel, motor manufacturer: Cummins QSK19-G11, General information Field of application: Construction Weights Empty weight: 7.200 kg Functional Generator capacity: 800 kVA CE mark: yes Other information Fuel consumption: 115 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A49B Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1065 l Transport dimensions (LxWxH): 5x1,95x2,5 Hsdsxb Nx Ajpfx Acrsl Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo Hsdpfxswid Spj Acrsl High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: good (used), functionality: fully functional, Used WILA OZU-318 tools V100mm OZU-318 100x80° R=20 H=100 Hjdpfxoyzh Sds Acrol 1x 515mm 2x 200mm Total length L=915mm Fixed price € 1,650,- FCA Drachten, NL No response to offers or requests for lowest price.

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C18A2S400367, fuel type: diesel, motor manufacturer: Caterpillar C18, General information Field of application: Construction Weights Empty weight: 5.952 kg Functional Generator capacity: 715 kVA CE mark: yes Other information Fuel consumption: 107 Liter per Hour at 75% Load Generator: Caterpillar A3355L4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1082 l Hedpfxeyvx S Dj Acrel Transport dimensions (LxWxH): 5,32x1,92x2,29 Additional information Please contact Ronald van der Laar, Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, width / mm depth / mm height / mm weight / kg Turning & Milling Tool Set – approx. 85 pcs – SK40 – incl. Tool Cabinet For sale is a large set of high-quality turning and milling tools from well-known brands. Details: approx. 85 tools SK40 holders includes driven tools various tool holders, drills, milling cutters, etc. incl. solid blue tool cabinet Condition: Used, in good condition with normal signs of wear. Fully functional and ready to use. Scope of delivery: Everything as shown in the pictures. Hsdpfoy Diblox Acrel Ideal for CNC / metalworking / workshop use.

Condition: excellent (used), Grooving tool, special tool, grooving tool, grooving machine, grooving machine, grooving tool Hjdpfjb A I Ufex Acrsl -Special tool for grooving blind holes -Guided tour -grooving tool -Weight: 80 kg

Condition: used, Year of construction: 1999, x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 124 swivellable manuell +/-45 ° Hodpfx Aoy Ay Nqecrel max. tool diameter 125 mm max. tool weight 6 kg table surface area 400 x 800 mm T-slots 5x14x80 max. table load 400 kg feed speeds X/Y: 0 - 6.000 mm/min feed speeds Z: 0 - 4.000 mm/min rapid traverse X/Y: 6 m/min rapid traverse Z: 4 m/min total power requirement 11 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,9 x 3,5 x 2,0 m

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, tool type: HSK 100, We are offering a comprehensive lot of approximately 200 HSK-100 tool holders in various versions for sale. These tool holders come from productive use on a WFL Millturn M 100 and were utilized there for a range of turning, drilling, and milling operations. The inventory includes tool holders from different years of manufacture, approximately from 2006 to 2020. Hjdpfx Acoy Hfnmersl The scope of supply includes tool holders and systems from renowned manufacturers such as BENZ, Gühring, Wohlhaupter, and other established brands. Included are various types, such as milling holders, drilling and boring tools, special holders, adapters, and other HSK-100 tooling devices. The attached photos show the tool holders both in their previous mounted use on the machine or at the operator station, as well as in their current stored condition in our warehouse. This lot is especially suitable for operators of WFL Millturn machines or other comparable machining centers equipped with HSK-100 interfaces. An inspection can be arranged by appointment. Additional detailed photos of individual tool holders, manufacturer markings, or nameplates can be provided upon serious inquiry.

Condition: used, Year of construction: 2023, operating hours: 8,973 h, machine/vehicle number: ESF372667, fuel type: diesel, power: 32 kW (43.51 HP), motor manufacturer: Kubota, Field of application: Construction Empty weight: 1.039 kg Generator capacity: 40 kVA Hsdsyz Iyuopfx Acrol Transport dimensions (LxWxH): 2.45x1.1x1.48 Please contact PFEIFER GROUP for more information

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. Hsdomx Sl Topfx Acrel The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline

Condition: good (used), functionality: fully functional, machine/vehicle number: 31099, type of cooling: water, Equipment: documentation/manual, type plate available, Well-maintained Merkle TIG 253 W welding machine (WIG) with operating manual and 8-meter torch package. Inspection and testing on site is welcome! Hedjy Ey Uxjpfx Acrsl

Condition: new, Year of construction: 2025, machine/vehicle number: MLK1-07035-04/03, fuel type: diesel, motor manufacturer: Cummins 6BT5.9-G1, Field of application: Construction Generator capacity: 110 kVA Generator: Stamford UC.I274C14 Frequency: 50 Voltage: 400 Hsdpfeymi Rqsx Acrjl Drill equipment: Tank, Battery, Control Panel, Steel canopy Please contact Ronald van der Laar, Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: excellent (used), functionality: fully functional, All listed Eppinger items are suitable for an Okuma LT200-M and LT10-M, among others. All items are available in larger quantities. Condition: very good • Boring bar holder 7.030.180, angled, left-right, cylinder mounting Ø32, external and central coolant supply Manufacturer: Eppinger • M angle heads 90° 3.200.653, drilling and milling head angled right, collet chuck ER25A, external coolant Manufacturer: Eppinger • M tool holder, straight 180° 3.200.409, drilling and milling head, straight, short, collet chuck ER25, external coolant Hjdpey Hkk Hsfx Acrol Manufacturer: Eppinger • External holder 7.030.177, angled tool holder left - right multiple, square shank mounting, external coolant Manufacturer: Eppinger • M angular holder 90° with fine swivel adjustment 2x90° / 2x30°, 3.200.295, angle adjustable, drilling and milling head, straight, angle adjustable, collet chuck ER20A, external coolant Manufacturer: Eppinger • External holder, straight tool holder, multiple, 7.030.176, square shank mounting, external coolant Manufacturer: Eppinger • Parting holder, universal rotation direction, parting holder, universal rotation direction, external and central coolant supply Manufacturer: Eppinger