Used Sheets for sale (8,602)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 6.088.177.254, controller model: Durma DT-7, working width: 3,100 mm, sheet thickness (max.): 13 mm, overall weight: 11,800 kg, TECHNICAL DETAILS Max. sheet thickness: 13 mm Max. working width: 3,100 mm Overhang: 50 mm Design: Swing-beam Angle adjustment: Manual Shear gap adjustment: Motorized Back gauge type: Electric Back gauge depth: 1,000 mm Podpfx Aszuwvvog Ajgr MACHINE DETAILS GENERAL Control system: CNC Controller: Durma DT-7 Drive type: Hydraulic Power: 30 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,350 x 2,350 mm Weight: 11,800 kg Transport packages: 1 unit EQUIPMENT CE marking Finger guard: Fixed with fold-up guard Table type: Ball-bearing table

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Psdpfszv Rc Sjx Ag Aegr Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Condition: ready for operation (used), Year of construction: 1979, Available immediately ex-works: Swivel bending machine, Lotze Type 161 / 2500 / 6 Year of manufacture 1979 Pedpfjzwuilex Ag Aogr Bending length 2550 mm Material thickness up to 6 mm Drive power 7.5 kW Weight 6 tons Price: EUR 6,750.00 plus VAT, ex-works.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 10 h, ERBEND D-SFA 4230 – CNC Folding Machine The ERBEND D-SFA 4230 is a powerful double-sided CNC folding machine for accurate and flexible sheet metal processing. Pgsdpszwqwxjfx Ag Aor This machine is offered on behalf of a customer and has less than 10 operating hours. It is in nearly new condition, fully functional and immediately available. The machine can be viewed under power and tested by appointment. Main Features 4,200 mm bending length Double-sided folding: upwards and downwards ERFOLD 3D CNC control 2D/3D programming and simulation Motorized CNC axes U-shaped back gauge Pneumatic back gauge fingers Integrated vacuum cups for sheet positioning Segmented upper and lower tooling Pneumatic tool clamping CE certified Technical Specifications Model: ERBEND D-SFA 4230 Bending length: 4,200 mm Steel S235: max. 2.25 mm Stainless steel: max. 2.0 mm Aluminium: max. 3.0 mm Control: ERFOLD 3D CNC CNC axes: A, B and D axis Upper tool: 200 mm Crowning: Manual Machine weight: approx. 11,800 kg Double-Sided Folding The D-SFA technology allows the machine to fold both upwards and downwards, significantly reducing the need to turn or reposition the workpiece. Combined with the CNC-controlled back gauge, vacuum sheet positioning and ERFOLD 3D programming, this makes the machine particularly suitable for efficient production of large and complex sheet metal parts. Condition & Availability Less than 10 operating hours Nearly new condition Fully functional Immediately available Inspection and testing under power possible An excellent opportunity to acquire a nearly new ERBEND D-SFA 4230 without the delivery time of a new machine. Contact us for further information, pricing or to arrange a demonstration.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, Equipment: CE marking, Used Cnc folder Ras XL Center 63.30 cnc folder up down folder 3metre For Sale Capacity: 126-inch / 3.2 metre (3,200 mm) folding length and can handle up to 16-gauge (1.5 mm) mild steel. Bi-directional Folding: The machine folds parts both up and down, which minimizes material handling by the operator and increases production speed. Pgodsym T Iaopfx Ag Asr Precision Technology: It is equipped with five servo-regulated motors for high-speed operation and includes programmable gripper positions for creating tapered or conical parts. Software Control: Features a multi-touch PC control system where operators can draw profiles directly on the monitor; the software then automatically calculates the folding sequence and provides 2D/3D simulations. Design Flexibility: Offers 300 degrees of free space in front of the folding beams, allowing for the creation of complex part designs that standard machines might struggle to accommodate.

Condition: used, Machine type: Corrugated sheet profiling line – new CHIEF PHENIX type Main components: - Coil lifting arm – 10-ton capacity Psdpfsw Dd Hpjx Ag Aegr - Decoiler – 10-ton capacity - Straightener – Dimeco - Feeder – Dimeco Microfeeder - Hydraulic punching press – SCMB 650 tons - Post-press feeder – Heilbronn - Roller conveyors - Rollforming line – 1000 mm, corrugated profile, CHIEF PHENIX new type Machine Application Automated production line for converting metal coils into corrugated sheets, including straightening, high-force hydraulic punching, continuous feeding, and rollforming. Suitable for structural and cladding applications. Key Features / Differences Modern system with high-performance units: 650-ton SCMB hydraulic press for precise punching, Dimeco straightener and Microfeeder for high throughput. 1000 mm rollforming line configured for optimized CHIEF PHENIX corrugated profile.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Euro Fintec 410 is a deburring machine which has a 1 inch belt. The belt assembly can be easily adjusted to accommodate complex deburring operations. It comes complete with a dust collection bag to ensure safe operation It is in excellent condition and comes complete with a number of deburring belts. Pgsdpszmafqsfx Ag Aor

Condition: used, functionality: fully functional, Year of construction: 2018, Used Biegemaster DURA 3.1,50 Working length: 3100mm Bending capacity: 1.5mm steel Includes: roller shear Pgodpfxszwz Tks Ag Ajr Available from approximately November 2026.

Condition: used, Year of construction: 2008, Cutting bench, cutting shear Type: Hydraulic Manufacturer: Colmal Type: HS 40-13 Year: 2008 Controller: Delem DAC-350 Pgodpezry Szofx Ag Ajr Cutting width: 4050 mm Max. thickness: 13mm Incl. documentation and peripherals Incl. outfeed-conveyor Machine dimensions: 4800x2400x2650mm Machine weight: 15000kg - Year: 2008 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2022, condition: ready for operation (used), controller manufacturer: SIEMENS, table load: 3,000 kg, Automated sheet metal storage system manufactured in 2022. This TRUMPF Automated Sheet Metal Production System features a storage height of 7,900 mm and a maximum load per storage location of 3,000 kg. It includes 266 storage locations and supports sheet formats of 3,050 x 1,525 mm. If you are looking to get high-quality automated storage capabilities, consider the TRUMPF Automated Sheet Metal Production System we have for sale. Contact us for further details. • Storage system: STOPA Compact II • Type: Automated sheet metal storage system with chaotic storage management • Storage height: 7,900 mm • Sheet format: 3,050 x 1,525 mm • Maximum load per storage location: 3,000 kg • Number of storage locations: 266 • Total storage capacity: 798 t • Configuration: 8 sections/towers, up to 37 storage levels per section • Pallet format: GF 3050 x 1525 x 90 mm • Pallet types: SPO, SPMgl • Loading heights: 185 / 275 / 460 mm • Functions: Automatic material storage and retrieval; automatic material supply to connected production cells; storage interface for integrated production machines • Storage control • Server operating system: Windows Server 2022 • Central storage management and automated material flow management • Integration with TRUMPF production equipment • Connected production cells • TRUMPF TruLaser 5030 fiber (L76) • Machine type: CNC 2D fiber laser cutting machine • Working area: 3,000 x 1,500 mm Pgsdszu Sugjpfx Ag Aor • Laser source: TruDisk 6001, 6,000 W • CNC control: Siemens SINUMERIK 840D sl • TRUMPF TruMatic 6000 fiber • Machine type: Combined CNC punching and fiber laser cutting machine • Working area: 3,050 x 1,550 mm • Laser source: TruDisk 3001, 3,000 W • Maximum punching force: 180 kN • Linear tool magazine: 25 positions • TRUMPF TruBend Center 7030 (B34) – Cell 1 • Machine type: Automatic panel bending center • Max bending length: 3,123 mm • Max thickness: structural steel 3.0 mm; stainless steel 2.2 mm; aluminum 4.0 mm • Max box height: 220 mm • TRUMPF TruBend Center 7030 (B34) – Cell 2 • Same specifications as Cell 1 • System functionality (summary) • Central automated storage and retrieval of raw sheet material • Automatic supply of material to connected laser, punch-laser, and panel bending cells • Automatic transfer between storage and production stations • Centralized, high-capacity sheet handling • Main system configuration • 1 x STOPA Compact II automated sheet storage system • 1 x TRUMPF TruLaser 5030 fiber 2D laser cutting cell • 1 x TRUMPF TruMatic 6000 fiber punching and laser cutting cell • 2 x TRUMPF TruBend Center 7030 automatic panel bending cells Additional equipment • For TRUMPF TruLaser 5030 fiber (L76) • Automatic pallet changer • LiftMaster Compact 1530 (automatic loading and unloading) • STOPA storage connection/interface • For TRUMPF TruMatic 6000 fiber • SheetMaster 3000 x 1500 mm (automatic sheet handling) • GripMaster 3000 x 1500 mm • Storage system integration/interface • For TRUMPF TruBend Center 7030 (both cells) • 2-axis part manipulator • 5-axis rear stop • Rotary manipulator • ToolMaster Bend • Automatic loading and unloading • Storage interface • System-wide • Central storage management server (Windows Server 2022)

Condition: good (used), Year of construction: 2016, operating hours: 715 h, functionality: fully functional, machine/vehicle number: 2530-01, working width: 900 mm, Due to machine rejuvenation, we would like to sell our barely used Timesavers wet deburring machine. The machine is available for inspection and testing; it is live. Pjdpfx Agov Tnfie Aogr Please contact us with any questions.

Condition: good (used), Year of construction: 1980, You are bidding on a branded machine from the well-known German manufacturer Griebel. Features of the machine: Electric feed, cutting, and straightening machine Cuts up to 2mm steel – significantly more for aluminum (see nameplate) Usable length: slightly over 1.5m Sheet metal thickness (iron): 2mm Straightens the sheet metal using an adjustable multi-roller system Length and quantity are pre-set Weight: approximately 2 tons We also have other machines and tools available. You will receive an invoice in accordance with §25a UStG (German VAT law). The invoice amount includes VAT. I can arrange transportation services if desired; a forklift is available. Psdpfozcxa Hsx Ag Asgr Free loading as shown in the pictures. Inspection and testing are possible after arranging an appointment by phone. Payment in cash upon collection. If I can assist you with anything else, please call me. Thank you. Collection should take place within 8 days after the end of the auction.

Condition: good (used), Year of construction: 1969, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm Pgodpfx Aszwl D Hjg Ajr min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Psdpfxozwt Rbe Ag Asgr

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13.707, working width: 6,200 mm, sheet thickness (max.): 6 mm, power: 11 kW (14.96 HP), overall weight: 17,500 kg, throat depth: 60 mm, TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. working width: 6,200 mm Overhang: 60 mm Back gauge type: Electric Back gauge depth: 1,000 mm Pgjdszuwzrepfx Ag Aer Angle adjustment: Motorized Sheet support system: Pneumatic MACHINE DETAILS Power: 11 kW Drive type: Hydraulic Control: Conventional Control system: Elgo Dimensions & Weight Overall length: 6,400 mm Shipping weight: 17,500 kg EQUIPMENT CE certificate Documentation

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: M0335, Cyril Bath type 20 T Hydraulic Swing Arm Profile Stretch Forming Machine year 1997 serial number M0335 capacity 20 t engine power 126 kW electric connection 400 V description With control Cyril Bath Monitor Type: Flexscan 685 12 CNC axes 4 auxiliary axes Pedpfx Agoqcu Acj Asgr Stretching force 20–200 kn Bending angle 2 x 95 degrees Rotation stretching cylinder 2x –45/225 degrees Component length from 762 to max 3810 mm Hydraulics from Rexroth with 2 x hydraulic pumps: 45 kW each Various spares available

Condition: used, Year of construction: 1997, total length: 4,200 mm, total width: 2,200 mm, total height: 2,000 mm, Colour: Cream Weight: 13.500 kg Cutting bench, cutting shear, Guillotine shear Type: Hydraulic Type: Conventional Manufacturer: Safan Type: HVR 430-6 Year: 1997 Psdpszlytljfx Ag Asgr Max. working width: 4300mm Max. sheet thickness: 6mm Electric backgauge 1000mm + stacking-station Motor-power: 15kW Machine-dimensions: 5200x2200x2000mm Machine-weight: 13500kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4300 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Options: Digital readout - Transport dimensions: 4200mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 13500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: 3170, control type: manual, actuation type: electric, working width: 3,000 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, Only aluminum sheets, predominantly with a thickness of 2 mm, were used. The machine was used infrequently. Podpozk Ihnefx Ag Asgr

Condition: excellent (used), Year of construction: 2019, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller model: BMS Multi Touch, working width: 4,010 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 985 mm, total width: 5,200 mm, input voltage: 400 V, input frequency: 50 Hz, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, We are offering this very well-maintained Sperr & Lechner BIEGEMASTER Dura 4.15 folding machine, year 2019. Manufacturer: Sperr & Lechner Model: BIEGEMASTER Dura 4.15 Year of manufacture: 2019 Condition: Very good Category ID: 1472 Pjdjy Sxayspfx Ag Ajgr Type ID: 1258 Machine type: Folding machine If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2005, total length: 3,940 mm, total width: 1,980 mm, total height: 2,010 mm, Empty weight: 7.000 kg Working width: 950mm Working height: 0,5-120mm - Year: 2005 - Documentation available: No Pgsdoxwnbuepfx Ag Aor - CE marking present: Yes - CE certificate present: No - Serial number: - Drive system: CNC - Number of stations [pcs]: 3 - └ Station type 1: Abrasive belt - └ Station type 2: Rotary brush - └ Station type 3: Rotary brush - Power [kW]: 39 - Min. sheet thickness [mm]: 0.5 - Max. sheet thickness [mm]: 120 - Max. working width [mm]: 950 - Transport dimensions: 3940mm x 1980mm x 2010mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Pgodpfx Agow T Sc Ae Asr Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length

Condition: good (used), total width: 1,000 mm, total length: 1,400 mm, total height: 870 mm, For sale is a solid, cast-iron straightening and marking plate with dimensions of 1400 x 1000 mm. This plate comes from a metal or sheet metal processing workshop and is ideally suited for straightening work, measuring tasks, jig and fixture construction, as well as assembly and testing operations. Technical specifications: Dimensions: 1400 x 1000 mm Material: Cast iron Heavy-duty industrial design Transport openings on the sides Includes 4 adjustable straightening supports Condition: Used Robust workshop design Normal signs of wear and storage Immediately available Application areas: Mechanical engineering Toolmaking Podpfx Agezwuaqs Asgr Welding technology Sheet metal processing Measuring and testing operations Jig and fixture construction Other Inspection possible by appointment. Please note that the sale of this straightening plate is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Dismantling, removal, and transport are the responsibility of the buyer and at their own risk. • The buyer is responsible for providing personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly.

Condition: good (used), Year of construction: 1982, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Pgodpfxszwl Ifj Ag Aor Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: used, functionality: fully functional, Year of construction: 2013, degree of automation: semi-automatic, actuation type: electric, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 20 mm, back gauge: 1,000 mm, input current: 60 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, We are offering this used Schechtl MBM 310/ECT pivoting bending machine, manufactured in 2013. Year of manufacture: 2013 Model: MBM 310/ECT Serial number: MA6239 Capacity: 1.00 mm Three-phase frequency: 50 Hz Machine rated current: 60 A Pgjdpfx Ajzrabijg Ajr Wiring diagram number: 300.000 Order number: 20.013 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, functionality: unexamined, Year of construction: 2008, 1 Press brake, manufacturer GEKA, type HSE 6, year of manufacture 2008, machine no. 20-0238, capacity for ST 37 steel: 1.5 mm, working width: 2 m. Pgodpfx Agszvvm Ae Aor