Used Shrink for sale (496)

Condition: good (used), functionality: fully functional, Offered is a shrink tank. Model SL70. 70L, 380V, 32A Pneumatic cylinder and level sensor are new. Further details upon request. Payment in cash or in advance. Kdodpfxew Tmyio Ag Nou Sale exclusively to commercial customers. No warranty, no guarantee.

Condition: used, Year of construction: 2008,   Machine Overview The ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed to collate containers and package them on a corrugated tray with film overwrap. The machine is configured for Wrap + Film on tray and operates with a straight product infeed. It is suitable for a wide container range, from 0.5 L up to 10 L, typically covering PET, glass or HDPE bottles, cans, and similar rigid containers. The unit was manufactured in 2008 and underwent a general overhaul in 2022. It is described as ready for operation. Operating mode: Automatic Infeed layout: Straight infeed (inline) Packaging: Tray wrap with neutral film overwrap Format range: 0.5 L – 10 L Machine configuration: Delivered without container infeed system (to be provided by the line) Year of manufacture: 2008; Overhauled: 2022 Typical process sequence: product collation in line; tray blank pick-up and forming/wrapping around the collation; application of neutral film and sealing; discharge to downstream handling. The configuration offers robust stabilization on tray with a protective film wrap, suitable for distribution and palletizing. Key Technical Data Model: COMBIGIOTTO 90-M Brand: ATLANTA Operating condition: Ready for operation Package configuration: Wrap + film on tray Film type: Neutral Tray: Available (tray packaging configuration) Machine feed type: Straight (inline) Format capability: 0.5 L to 10 L containers Year: 2008 (overhauled 2022) Automation & Control Industrial PLC-based control with HMI for recipe handling and setpoint management (format parameters stored for repeatability). Kdjdpfexdnbzjx Ag Nju Speed control via frequency inverters/servo drives to synchronize infeed, collation, tray wrap and film application. Integrated diagnostics, alarm history and counters (shift/lot totals). Typical sensors: product presence, jam detection, film end-of-roll, tray blank level, safety interlock status. Electrical protection degree: IP54 for the electrical system and motors. Line Integration Container infeed: not supplied with this machine. The packer expects a stable, synchronized upstream supply (accumulation/spacing/dividing to be provided by the line integrator). Inline design simplifies alignment with fillers, labellers and downstream conveying. Standard interface signals (typical): machine ready, run permission, emergency stop loop, fault, upstream/downstream handshake. Detailed I/O list can be aligned during integration. Outfeed prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project engineering). Condition & Maintenance Overall status: Ready for operation. Overhaul completed in 2022 to restore full functionality.

Year of construction: 2014, condition: good (used), Cryovac STE96-600 hot water shrink tunnel Kdjdpomx Sknsfx Ag Nsu Serial: SN00422 2014, Stainless hot water shrink tunnel, steam, belt dimensions 1300mm x 600mm, max product height 220mm, HMI touch screen control, 3Ph

Condition: used, Year of construction: 2019, Overview The shrink packer CERMEX CP18 CAE was manufactured in 2019 by the French company CERMEX. This is a shrinkwrapper with accompanying sealing bar. The machine has run only 1,100 hours and is immediately available, as the production in the factory was stopped in 2022. Truck loading is included. Technical data Capacity: Up to 40 ppm (packs per minute) Formats: 75cl – 3x2 Dimensions: L. 623 cm × W. 250 cm × H. 210 cm Working table height: Adjustable from 0.9 m to 0.95 m Electrical power: 30 kW Kedpswgyx Tefx Ag Nedu

Condition: good (used), Year of construction: 1995, type of input current: three-phase, KUPER SHRINK TUNNEL DUPLEX Manufacturer: KUPER Type: ST/I-1400 Year of construction: 1987 Serial number: 594 Working width: 1300 mm Role Holder: Yes Electrical connection: 400 V Overall size, H: 3500mm Overall size, W: 2350mm Overall size, M: 1850mm Vv 2 blow-off units Power: 59kW Temperature range 230°C Duplex 2100/650 film input station vv film holder Ksdpfxekn Rz Hj Ag Nodu Swivel arm with chain hoist sealing rod Length 2100mm "Siemens" control panel Overall Size: 3000*2000*2300mm További információ erről a forrásszövegrőlTovábbi fordítási információhoz forrásszöveg szükséges Visszajelzés küldése Oldalsó panelek

Condition: not inspected (used), Year of construction: 2011, MINIPACK-TORRE SC55 – SHRINK WRAPPING MACHINE YEAR 2011 Kjdpfewu Hczex Ag Nsdu

Year of construction: 2021, condition: used, For sale: FM 3028 shrink wrap sealer from the renowned manufacturer ArkForm. This machine is designed for professional packaging of products in shrink film—ideal for manufacturing facilities, shops, wholesalers, and any environment where fast and visually appealing packaging is required. Technical data: • Model: FM 3028 • Manufacturer: ArkForm • Serial number: 202208631 • Year of manufacture: 2021 • Dimensions: 1000 × 620 × 1200 mm • Supply voltage: 230 V, 50 Hz • Power: 4.0 kW • Weight: 100 kg Description of operation: The machine seals the film and shrinks it onto the product at the same time. It features a heat chamber with a transparent cover for full monitoring and control of the packaging process. The film roll is mounted on the side of the unit, and the film guiding system allows for quick and convenient packaging preparation. Applications: • Food packaging (bakeries, confectioneries, grocery stores) • Packaging of cosmetics, books, media, electronics, and other products Ksdpfoxlg Ntsx Ag Nodu • Protecting items from dust, moisture, and transport damage Condition: The machine is in very good technical condition, complete, and ready for operation.

Condition: used, Year of construction: 2008, Machine Overview Automatic tray plus film packer ATLANTA COMBIGIOTTO 90-M designed for secondary packaging of bottles with 90° side infeed. The machine forms a corrugated tray and wraps the product with neutral shrink film, then conveys it through a shrink tunnel to obtain stable, retail-ready bundles. Ideal for beverage lines handling PET, glass or HDPE bottles. Reference No. FA56. Year 2008, overhauled in 2022. Condition: Ready for operation. Indicative output up to 25 packs/min, depending on product and format. Operating concept: automatic grouping of bottles, tray forming/loading, film wrapping and shrink-tunnel consolidation. Kdodpfxjxdicto Ag Nju Packaging configuration: Tray + neutral film (shrink). 90° infeed enables compact layouts and easy connection to existing conveyors. Key Technical Data Make / Model: ATLANTA COMBIGIOTTO 90-M Operating type: Automatic Infeed orientation: 90° side infeed Packaging: Tray + film (neutral) Tray magazine/formation: Available Nominal capacity: up to 25 bundles/min (format and product dependent) Year: 2008 (overhauled 2022) Condition: Ready for operation PLC: SIEMENS S7 E 300 Automation & Control Industrial PLC-based control with operator HMI for recipe selection, speed setpoints and diagnostics. Inverter-controlled drives for smooth acceleration and product handling. Photoelectric sensors for product presence, jam and film detection. Temperature-controlled shrink tunnel for consistent film performance. Interlocked access doors with safety monitoring for guarded zones. Line Integration Upstream: accepts bottles from conveyor with 90° transfer to the infeed section; integrated selection/divider to create pack patterns before tray loading. Downstream: discharge conveyor after shrink tunnel for connection to inspection, case handling or palletizing. Signals and handshakes typically include start/stop, fault, emergency stop circuit integration and speed reference. Mechanical interface and layout drawings available on request for line engineering. Condition & Maintenance General overhaul performed in 2022. Machine presented as ready for operation. Preventive maintenance recommended: periodic checks of film path, knife/sealing components, tray magazine/erector, lubrications and conveyor wear parts. Performance & Versatility Suitable for a wide range of cylindrical or square bottles commonly used in beverages. Typical pack patterns achievable for bottles (e.g., 2×2, 3×2, 4×3, etc.) depending on container size and tray dimensions. Neutral shrink film for clear presentation; tray provides rigidity and stacking strength. Consistent bundle quality via controlled film wrapping and thermal shrink process.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, The machine is fully operational. CMC PRATICA poly foil wrapping machine. Year 2009 and not used that much by its former owner. Ksdpfx Agsxlgp To Nedu

Condition: used, Year of construction: 2006, Overview This machine was built in 2006 by Italian manufacturer Gamapck. The machine is in good production condition, already dismantled and stored in a warehouse. Techn. Details Capacity: Up to 45 packs / minute on single lane Last production was 16,000 bph (six packs) Bottles formats: PET bottles with shrinkable PE film 12 x 0,33L 6 x 0,50L 6 x 0,33L 24 x 0,50L Machine drive: Siemens S7 Machine equipped with Infeed conveyor & CE control panel Supplied with spare parts Kdedpfxow En Uas Ag Nsu

Condition: good (used), 400v, 5,3 KW, length of the seal bar: 550 mm, Dimension: 860x900x1150 mm Kedpfx Agsu Rqzxs Nodu

Condition: excellent (used), • Original Bilz ThermoGrip holders – Made in Germany • SK40 taper, type T0600/AD40 and T0800/AD40 • Balancing G6.3 / 15,000 rpm – suitable for high-speed operations • Set includes solid carbide VHM end mills of various diameters • Ideal for precision machining and applications requiring high stability • Very good condition, ready for operation Top-tier equipment – robust construction, German quality, secure clamping. Kodpfx Aexau Ereg Nodu

Condition: good (used), Tunnel passage width: 540 mm Tunnel passage height: 40 mm Kodjhinmfopfx Ag Nedu Quantity: 3 pieces Price/piece

Condition: used, Year of construction: 2013, Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  1650 Bundles/Hour The Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  1650 Bundles/Hour is a machine designed for shrink film packaging, ensuring high performance and reliability. Consequently, this model, manufactured in 2013, operates at a speed of 1650 bundles per hour, making it suitable for high-efficiency production environments. Technical Features of the Used Shrink Wrapper ITAL PAL FNC70+ PC300T1 1650 Bundles/Hour First of all, the machine features a straight entry configuration, allowing a linear handling of containers before film wrapping. Additionally, it works with neutral film, but it also supports printed films, enabling packaging customization according to production requirements. Moreover, the system includes a tray, which is essential for product stability during the packaging process. It processes formats ranging from 3 to 24 pieces per carton, with an adjustable configuration based on container volume. Similarly, the machine operates with American boxes, a widely used packaging type in the industry to ensure product protection and durability. Electrical Specifications and Energy Consumption Furthermore, the system operates with a voltage of 380V, a power consumption of 10 kW, and a frequency of 50 Hz, meeting industrial standards for this type of machinery. Given these specifications, the shrink wrapper dimensions are 3400 mm in length and 2400 mm in depth, making it compatible with many existing production lines. Container Compatibility In particular, the Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  processes various types of containers, primarily focusing on glass bottles and cans, offering operational flexibility for different industrial sectors, including the beverage and food industries. As a result, manufacturers benefit from a machine that efficiently handles diverse packaging needs. Operational Status and Maintenance Kdjdpfxov Ew Rlj Ag Nsu Notably, the machine is currently in production, ensuring full operational functionality and proper performance of all its components. Additionally, both technical manuals and safety protections are available, complying with industrial safety regulations. In addition to these features, the shrink wrapper has undergone periodic revisions, maintaining consistent performance and minimizing the risk of machine downtime. Furthermore, spare parts are available, facilitating routine and extraordinary maintenance without affecting productivity. Conclusion of this Used Shrink Wrapper ITAL PAL To sum up, the used ITAL PAL FCN70 + PK300T1 shrink wrapper is an optimal solution for those seeking a reliable machine with high production capacity. Consequently, its versatile configuration, compatibility with different packaging formats, and guaranteed maintenance make it ideal for automated packaging lines. Given its efficiency, the 1650 bundles per hour speed, combined with compatibility with neutral and printed films, makes it a strategic choice for optimizing industrial packaging processes. Therefore, this machine is an excellent investment for businesses aiming to enhance their packaging efficiency.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: MP5035, The Heat shrink MP5035 Skin Packer by Sontex is a sealer machine designed for efficiently sealing heat shrink wrap materials. This product is specifically engineered to pack and ship products securely, ensuring a strong seal to prevent damage during transportation. With its reliable brand reputation and durable design, the Sontex Heat shrink MP5035 Skin Packer is a valuable tool for businesses in the packaging and shipping industry. Kodpfxswtzv Ts Ag Njdu Sontex MP5035 Skin Packer. We purchased this machine in 2018 as one of our client required products to be skin sealed, the client then had a change of plan. We therefore have never used the machine. However it was fully refurbished by Sontex the manufacturer when i purchased and more than happy to ensure its all in good order before collection. We have 4 rolls of 390 x 175 film and skin boards to suit. I've been holding to the machine "just in case" but I need the space back, viewing recommended. Size Wise when purchased we collected in a VW crafter. Collection only HP19 8UP Aylesbury

Condition: used, Year of construction: 2006, Overview This machine was built in 2006 by Italian manufacturer Gamapck. The machine is in good production condition, already dismantled and stored in a warehouse. Techn. Details Capacity: Up to 45 packs / minute on single lane Last production was 16,000 bph (six packs) Bottles formats: PET bottles with shrinkable PE film 12 x 0,33L 6 x 0,50L 6 x 0,33L 24 x 0,50L Machine drive: Siemens S7 Machine equipped with Infeed conveyor & CE control panel Supplied with spare parts Kdsdpfew En Ugjx Ag Neu

Condition: good (used), Year of construction: 2008, Supervac GK 840 B Shrink Wrapper 9.9 KW 23.2 amp 700mm Belt Width Kjdjqu U D Djpfx Ag Njdu Three Phase Power Fully Stainless Steel

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. Kedoh U A I Ropfx Ag Nedu -Temperature adjustable up to 250 degrees and transport speed up to 25 m / min. -Choice of fixed or co-rotating tunnel bars. -By means of deflectors, the hot air streams at the top and in the middle can be adjusted separately. -Bottom air can be switched on separately. -The machine can be pushed or fixed in place by means of lockable castors.

Condition: good (used), Format: 500x500mm Kodpfogt Un Sjx Ag Nodu

Condition: used, Year of construction: 2003, Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour The Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour shrink-wraps products efficiently. Consequently, its fully automated structure and production capacity of 1200 bundles per hour ensure high performance. Technical and Functional Specifications The Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour operates with a continuous motion system, thereby maintaining a steady production flow without interruptions. Moreover, the wrapping process applies shrink film, effectively packaging bottles, cartons, and other containers. In addition, the system supports high-speed production lines, thus minimizing downtime and optimizing operational efficiency. Furthermore, the machine incorporates a straight inline feed system, which allows it to adapt to different conveyor speeds while integrating seamlessly with other machinery in the bottling line. As a result, this configuration simplifies integration into existing plants without requiring complex structural modifications. Shrink Film Characteristics In particular, the Used Shrink Wrapper Tetra Pak  applies standard shrink film, thereby eliminating the need for printed film support. As a consequence, this design increases flexibility in packaging material selection and significantly reduces operating costs. Therefore, the machine remains suitable for diverse industrial applications. Bundling Capability Notably, the bundling system of the Used Shrink Wrapper Tetra Pak creates packs with or without trays, depending on the chosen configuration. Additionally, the machine accommodates various container formats, including bottles, bricks, and cartons, thereby providing high flexibility in production management. Since it runs at 20 bundles per minute, the system efficiently delivers 1200 bundles per hour, making it an excellent choice for high-production plants aiming to optimize workflow. Consequently, businesses can enhance their operational throughput significantly. Shrink Tunnel Kdjdpfov Ew Iwjx Ag Nsu The Used Shrink Wrapper Tetra Pak includes a high-efficiency shrink tunnel, which ensures uniform sealing and tightening of the film around the bundle. Additionally, the system regulates temperature control, thereby guaranteeing optimal shrinkage without damaging packaged products. As a result, this feature preserves packaging quality and minimizes production waste effectively. Operating Conditions and Safety of the Used Shrink Wrapper Tetra Pak At present, the Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour remains in storage condition, thus making it ready for reinstallation and operation. Furthermore, the system incorporates safety devices that protect operators during use, thereby minimizing accident risks and ensuring compliance with industrial regulations. Manufactured in 2003, the Used Shrink Wrapper Tetra Pak continues to provide an efficient, robust, and easily integrable packaging system. Moreover, its modular structure and compatibility with various packaging materials make it a versatile solution for multiple sectors in the food and beverage industry. Ultimately, this machine enables companies to optimize their packaging operations while maintaining high standards of safety and efficiency

Condition: good (used), Strip length: 1250 x 650 mm Kdsdpfxsi D Dz Hs Ag Nou Welding surface: 1000x700mm

Condition: used, Year of construction: 2007, Used Shrink Wrapper DIMAC STAR ONE up to 1800 boxes/h Introduction to Efficiency and Precision In the bottling machinery landscape, efficiency and precision are key. Consequently, the Used Shrink Wrapper DIMAC STAR ONE emerges as an optimal solution. Specifically, this model, the STAR ONE P 30 from 2007, shines due to its capacity. It handles up to 1800 boxes per hour. Thus, it ensures a steady and reliable workflow. Design and Adaptability of the Shrink Wrapper DIMAC STAR ONE Designed for various container types, including glass and PET, this machine meets broad industry needs. Its straight feeding system guarantees smooth, orderly product transport. Therefore, it minimizes the risk of damage or unexpected stops. Speed and Flexibility The STAR ONE P 30 model operates at 30 bundles per minute. This balances production speed with attention to detail effectively. The machine uses neutral film for wrapping. Additionally, there’s an option to add a tray, offering significant packaging flexibility. Safety and Operability of the Shrink Wrapper DIMAC STAR ONE Operational safety is another critical aspect. The Used Shrink Wrapper DIMAC STAR ONE includes several safety features. These features protect operators and ensure a safe working environment. Instruction manuals are available, simplifying machinery management. Hence, maintenance and routine operations proceed smoothly. Kjdpfovgt Sbox Ag Nodu Technical Specifications and Environmental Considerations Technically, the machine operates at 3×400 V, with a power of 47 kW and a frequency of 50 Hz. This proves it as an energy-efficient option. Currently stored in a warehouse, the Used Shrink Wrapper DIMAC STAR ONE is ready for production line reintegration. It promises reliable, long-lasting performance. Conclusion: A Wise Investment for Operational Efficiency In conclusion, choosing a Used Shrink Wrapper DIMAC STAR ONE for shrink wrapping operations is wise. It represents a wise investment for operational efficiency. The combination of speed, flexibility, and safety makes this model valuable. It meets the most demanding production needs.

Condition: used, Year of construction: 1999, Used Shrink Wrapper OCME VEGA S 60-2-F 48000 bph The used shrink wrapper OCME VEGA S 60-2-F is a high-performance and reliable packaging solution, ideal for wrapping bottles, cans, or other containers using shrink film. Designed for high-speed production lines, this machine can achieve an impressive output of up to 48,000 bottles per hour (BPH), making it suitable for large-scale production needs while ensuring accuracy and efficiency. Main Features Kjdpevgu Dxofx Ag Nsdu Model: OCME VEGA S 60-2-F Maximum speed: Up to 48,000 bottles per hour Configuration: Operates on 2 tracks to optimize production capacity Supported formats: Various bundle configurations such as 3×2, 4×3, and 6×4, compatible with PET bottles, glass bottles, or cans Packaging material: Shrink film, with or without tray support The OCME VEGA S 60-2-F is engineered to support different formats, enabling flexibility in meeting various packaging requirements. With its dual-track setup, the machine maximizes production efficiency, ensuring consistent throughput even during intensive operation. Benefits of the OCME VEGA S 60-2-F High productivity: Thanks to its dual-track design, the machine is tailored to meet the needs of high-demand production environments, such as large beverage or food processing plants. Format versatility: It seamlessly handles multiple packaging configurations, whether you need multipacks for retail or bulk distribution. Energy efficiency: Designed with optimized thermal systems to reduce energy consumption while maintaining fast and reliable shrink wrapping. Robust and reliable: Built with industrial-grade components, the machine ensures long-lasting operation, even in challenging production settings. Easy maintenance: Features accessible components for fast, routine maintenance and minimal downtime, enhancing productivity on the production floor. Applications The OCME VEGA S 60-2-F is versatile and ideal for various applications, including: PET or glass bottles: Suitable for packaging water, soft drinks, beer, and oils. Cans: Designed to handle beverage cans for soft drinks, beer, or food products. Other containers: Handles a wide range of plastic, glass, or composite containers, making it suitable for both food and non-food industries. The ability to switch between different formats and configurations ensures that the machine is ready to adapt to changing production demands. Whether you are packing small retail units or larger multipacks, this machine guarantees flexible operation without sacrificing efficiency. Why Choose a Used OCME VEGA S 60-2-F? Opting for a used shrink wrapper like the OCME VEGA S 60-2-F offers businesses the opportunity to acquire premium packaging equipment at a fraction of the cost of a new machine. Each unit undergoes rigorous inspection, testing, and servicing to ensure full functionality and operational readiness before delivery.

Condition: used, Year of construction: 2001, Used Shrink Wrapper SMI SK 450T – 45 ppm – tray If you’re in the market for a top-tier shrink wrapping solution, look no further than the SMI SK 450T. This machine, crafted by the renowned brand SMI in 2001, represents a pinnacle of engineering and design, catering to your packaging needs with precision and reliability. Machine Specifications: Machine Type: Shrinkwrapper Brand: SMI Model: SK 450T Year of Construction: 2001 Max Speed: 45 packs per minute (ppm) Container Material: Glass Max Container Height: 340 mm Package Type: Film Tray Number of Slopes: 6 Max Reel Size: 500 mm Number of Reels: 2 Operator Side: Right Condition: As It Is Warranty: 6 Months Enhanced Efficiency and Versatility: The SMI SK 450T is engineered to elevate your packaging operations with its remarkable speed of up to 45 packs per minute. Its compatibility with glass containers and film trays ensures a sleek and professional presentation for your products. Precision and Flexibility in Packaging: With six slopes accommodating various container sizes and a maximum reel size of 500 mm, the SK 450T can accommodate diverse packaging requirements, providing the precision and flexibility your production demands. Seamless Operation and Monitoring: The SK 450T is equipped with an intuitive Human Machine Interface (HMI). Programmable Logic Controller (PLC), both developed by SMI. This guarantees ease of operation and comprehensive monitoring of the machine’s performance. Crafted for Optimal Ergonomics: The machine’s worktop height of 1200 mm is meticulously designed to provide ergonomic comfort during operation, reducing operator fatigue and boosting productivity. Kodjvgudxopfx Ag Nodu Satisfy Your Packaging Needs with Confidence: Don’t miss the opportunity to optimize your packaging process with the exceptional SMI SK 450T Shrink Wrapper. This machine’s advanced features, coupled with its reputation for performance and durability, make it a must-have for businesses seeking a competitive edge. Reach out to us today to learn more about the SMI SK 450T and how it can revolutionize your packaging operations. Elevate your production efficiency and product presentation with this premium shrink wrapping solution from SMI.

Condition: used, Year of construction: 2008, operating hours: 2,000 h, Used Shrink Wrapper Zambelli LFT 30 S/F Manufacturer: ZAMBELLI, Italia – 2008. Model: LFT 30 Capacity: 30 packs/min Working hours: only 2,100 Packer is for PET bottles only 1.5 – 2.0 – 2.5 l (packs 3×2) Not for smaller bottle volumes Packaging with foil without pad The machine is still connected. Preserved in good condition. General Description Machine for packaging in heat-retractable material, continuous movement, no sealers, Latest generation for medium and high production levels. Maximum speed depending on machine model type of product and bundle to be formed Unique design features in this type of machine: no mechanical parts on the operator side, thus giving great accessibility. Kjdevguwxspfx Ag Nodu mechanical parts grouped on opposite side to operator, thus making all routine and non-routine maintenance jobs simpler and faster. Used Shrink Wrapper Great range of choice, both in formats and versions. Simple and very quick format change. Electronic film unwinding and cutting. Film cutting with rotating blade. Usable film thickness from 40μ to 80μ. Possibility of using large reel size giving maximum working autonomy. The whole machine functions are supervised and controlled by a Zambelli computer. Machine complete with all safeguards, in accordance with current safety regulations. All machine configurations with possibility of working on a number of tracks. Vast range of optionals, including: computer for production data processing, antistatic bar, print registration, etc. The computer is particularly useful in that it can also be used for the careful planning of the machine’s preventive maintenance schedules. The controls are centrally grouped on an on-board control panel. All the motors are protected with automatic magnetothermal switches. Special care has been taken in the design stage to ensure that the machine is simple to run, with easy access for maintenance work. All the mechanical parts are grouped on the opposite side to the operator, for the following reasons: a) To allow access to the product with the minimum number of obstacles. b) To give maximum access for all routine and non-routine maintenance jobs, making them as quick and easy as possible. c) To simplify enormously all operations on the product conveyor belts, especially belt changing operations. OPERATIVE FLOW LFT 30 S/F The products reach the machine with the help of a feed belt positioned in line with the outfeed. A proper device divides up the required number of rows into the infeed guides. A sensor upstream of the feed controls the quantity of product. If the quantity of incoming falls below the minimum set level, the machine will slowly decelerate and stop.