Used Sircular Saw for sale (6,466)

Condition: used, Year of construction: 2008, functionality: fully functional, ATTENTION!: The machine is back on the market due to the buyer’s cancellation. Dismantling of the old machine will begin on November 12, 2025, as the new machine is being delivered. Bandsaw Machine for Processing Large Steel Plates The machine can operate in two different directions: - Across the width of the material: the plates are pushed into the saw frame. - Along the length of the material: the saw blade is rotated 45°, and the saw frame travels along the plate. Sawing Capacities in Manual Operation: - Maximum cutting height with band control: 360 mm (14.2") - Maximum cutting height without band control: 420 mm (16.5") - Cutting height with pressure roller: 280 mm (11.0") - Minimum cutting width: 10 mm (0.4") - Maximum cutting width: 2,000 mm (78.7") - Maximum cutting length: 7,000 mm (275.6") Sawing Capacities in Automatic Operation: - Maximum cutting height (standard): 250 mm (9.8") - Maximum cutting height (option): 350 mm (13.8") - Minimum trimming width: 10 mm (0.4") - Maximum trimming width: 2,000 mm (78.7") - Maximum cutting length: 7,000 mm (275.6") Bandsaw Speed: Infinitely variable - Standard: 13 – 130 m/min (42.6 – 426.5 ft/min) - 14 – 75 m/min (45.9 – 246 ft/min) - Option: 12 – 120 m/min (39.3 – 393.7 ft/min) Feed Rate: Infinitely variable - 0.5 – 250 mm/min (0.02" – 9.8"/min) Prodpoxvqr Tefx Adisd Bandsaw Blade Dimensions: - 9,754 x 54 x 1.3 mm (384" x 2.1" x 0.05") or - 9,754 x 54 x 1.6 mm (384" x 2.1" x 0.06") Kerf: 2.1 mm (0.08") Bandsaw Guide: Carbide, replaceable and adjustable Back-guide for bandsaw blade: Carbide strips, replaceable Bandsaw cleaning: Via easily replaceable, driven plastic brush Option: Automatic adjustment Machine Dimensions: - Length approx.: 11,500 mm (346.4") - Width (with door open) approx.: 8,800 mm (346.4") - Height (with laser lamp) approx.: 4,080 mm (160.6") - Working table height: 1,825 mm (71.8") - Approx. weight: 25,000 kg (55,116 lbs) Total power consumption: approx. 28.0 kW (37.5 HP) Saw motor output: approx. 7.5 kW (10.0 HP)

Condition: good (used), Year of construction: 2005, Round cutting area: 260 mm Square cutting area: 260 x 260 mm Smallest diameter to be sawn: Ø 10 mm Smallest cutting length: 5 mm Minimum remaining piece length, single cut: 10 mm Minimum remaining piece length, automatic operation: 110 mm Single automatic material feed max.: 680 mm Multiple material feed: 9,999.9 mm Belt speed: continuously adjustable 15 -125 m/min Prjdpfx Asu R I A Hsdisd Cutting feed: continuously adjustable Material feed: ball screw Automatic feed: with feed vice (Sp II) Material clamping: hydraulic, continuously adjustable. Clamping force: Machine vice (Sp 1) approx. 150 - 800 daN Feed vice (Sp II) approx. 150 - 800 daN Saw blade dimensions Standard: 4115x41x1.3mm Saw blade guide: hard metal, replaceable Saw blade tension: hydraulic Saw blade cleaning: using easily replaceable wire brush. Driven by flex shaft in proportion to the main drive. Coolant: supply via coolant nozzle Volume of coolant tank approx. 110 l Pump output approx. 50 l/min including roller conveyor

Condition: used, Year of construction: 1994, Cutting length scale up to 5000 mm, saw blade 420 mm, roller conveyor 1500 mm Storage location: customer Psdew Sadropfx Adisrd

Condition: new, Year of construction: 2025, Cutting length: 5100 mm Cutting height: 2200 mm Cutting depth: 60 mm Prodpfx Ashpma Eedijd Scoring unit: yes Feed: manual Horizontal cut display: digital Vertical cut display: digital Saw blade diameter: 300 mm Swing-out material support: yes Saw blade speed: approx. 4000 rpm Motor power: 3 kW Machine length: 6300 mm Machine depth: 1800 mm Machine height: 3100 mm Weight: 850 kg

Condition: good (used), Bandsaw BU-801 - Year of manufacture: 1983 - Sturdy cast iron machine - Heavy-duty grey cast iron table: 1200 x 900 mm - Dimensions: 2400 mm x 1500 x 1300 mm - Throat width: 750 mm Predpjxwdx Nefx Adiod - Cutting height: 550 mm - Blade width: 45 mm - 4 kW - Weight: 880 kg

Condition: used, Year of construction: 2008, Sawing diameter (round): 260 mm Sawing diameter (square): 260 mm Sawing diameter (rectangular): 300 x 260 mm Saw blade dimensions: 4200 x 34 x 1.1 mm High-performance band saw automatic machine, heavy-duty hydraulic production band saw Pjdpfx Ajwm Rqtodiord Parallel sawing feed system in profile guide rails Mitsubishi NC program control E1032 for preselection of 90 sets, each with a specific quantity and corresponding cut length PLC control Mitsubishi With Siko incremental encoder Material feed with ball screw spindle 950 mm in one stroke, any desired cut length from 3 mm – 9999 mm Hydraulic material clamping with long-stroke cylinder, opening on both sides Material clamping with double vice in front of and behind the saw blade Remaining piece length in automatic mode: 90 mm Max. cutting length in automatic mode: unlimited Material support height: 850 mm Net weight: 2300 kg Dimensions W x H x D mm: 2580 x 2000 x 2000

Condition: new, Year of construction: 2025, The Marinus Powermax Endmatcher is designed for head-end machining tongue and groove on parquet floorboards, decking and cladding, producing fixed and variable lengths. It can be used for any type of wood; hardwood, softwood, or engineered wood. The machine can cut to length, cut out defects, and do head-end profiling, all in a single pass of the wood through the machine. When feeding wood into the machine, it is possible to mark defects, like knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. Lengths: 450 - 6000+ mm Widths: 50 - 300 mm (optional width of 400mm or 500mm) Thicknesses: 8 - 45 mm Capacity: up to 20 pc/min Length modes: Variable / Fixed / Round. Podpfx Adof Hkgpsisrd This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: ready for operation (used), Year of construction: 2020, General Data Machine weight 1950 kg Measurements height 1700 mm Dimensions Machine Length 1700 mm This Wood Band Saw was manufactured in 2020. It features a maximum log diameter of 1100 mm and a cutting length up to 10 meters. The main drive is robust at 15 kW, ensuring efficient operation. It includes a double edger, wood excavator, and various operational enhancements such as an electrically adjustable saw head and multiple feed speeds. Ideal for comprehensive woodworking tasks. Contact us for more information about this machine. Application Types Sawing (Wood) Predpfx Aexwqv Iodijd

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Prsdpfx Adsxyl U Roiod

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Panel saw | Sliding table saw Pedpfxsxwccao Adierd 3200mm sliding table Rip fence 1250mm Extension table with panel support Saw blade Ø400MM Scoring unit 5.5kW Digital readout on rip fence COLLECTION: Almelo, Netherlands Mobile: 0031634707163

Condition: good (used), Bandsaw UH 800 - Year of manufacture: 1986 - Band length: 5600 mm - Upper and lower roller guides; brake motor - 5.5 kW; 380 Volt Predoxwdhkopfx Adiod - Tilting table - Fence missing - Table 900 x 900 mm - Cutting width: 780 mm - Roller diameter: 800 mm - Weight: 720 kg

Condition: new, – Semi-automatic – Hydraulic – 2 speeds: 40/80 m/min Prodpfx Adjwin Rvjied – Double miter – Hydraulically adjustable sawing pressure – Cooling system – Saw blade 3960 x 27 x 0.9 mm – Emergency stop – Documentation – 400V

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 200 mm, The Marinus Powermax Chevron is an advanced machine line for head-end machining tongue and groove on Hungarian-point (Chevron) and herringbone parquet. Several wooden parquet boards can be loaded into the infeed cassette, after which the process runs automatically. First the boards are pre-cut to the corresponding length and angle in the cross cut saw unit, then they go via conveyor to the Chevron machine. Before the profiling takes place the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. Resulting in high profile accuracy with no noticeable edge on the top side when the boards are fitted together. The two arms on which the profiling heads slide back and forth are sturdy built and driven by servo motors, which guarantees that all the boards have exactly the same length and angle. The lengths and angles are stepless adjustable via the user friendly touch screen panel. Podpsiv R Hhsfx Adisrd This clamping system combined with two pre-cut aluminium backing blocks effectively prevents blow-outs and splintering. Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Angle: -45° to +45° Capacity: Up to 10 boards per minute Length modes: Fixed lengths This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: used, Year of construction: 2018, 5.5 kW main motor, frequency converter (2000-6000 rpm), motorized 2-axis scoring unit with its own drive. Motorized height adjustment in 0.1 mm increments. Motorized angle adjustment in 0.1° increments with digital display. 1090 x 630 mm miter gauge. Narrow and wide extraction hoods with quick-change function. Clamping shoe, sliding block, and manual quick-release clamp. Sliding carriage length 2150 mm (cutting length 2170 mm) - Quick-Scoring equipment packages - Scoring unit adjustable without tools from 2.8 to 3.6 mm - Miter gauge +45° - 45° - On/off switch on the sliding carriage. Prjdpfxevvkm Uj Adisd Storage location: Nattheim

Condition: not inspected (used), Year of construction: 2024, functionality: limited functionality, feed length X-axis: 4,000 mm, feed length Y-axis: 5,200 mm, feed rate X-axis: 35 m/min, working width: 400 mm, saw blade diameter: 450 mm, input voltage: 400 V, EXPORT automatic crosscut saw feeding length 4,000 mm saw blade Ø450 mm cutting width 400 mm cutting height 120 mm 9.5 kW saw motor 1.5 kW feed servo motor infeed table 5,200 mm outfeed 3,000 mm For more information, please contact us, preferably by phone. Podpfxsw Adnds Adijrd

Condition: good (used), saw blade diameter: 450 mm, – Saw blade 450 mm – Double mitre Pedpfowq Ex Hjx Adiord – 2 pneumatic clamping devices – Protective hood – 400V

Condition: used, Year of construction: 1995, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Material support: Plastic battens, ejecting Measuring system: Scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Weight approx.: 1500 kg Dimensions: 6300 x 1500 x 2900 mm Motor power: 4.4 kW Podpfx Aovvkqyediord Storage location: Nattheim

Condition: used, Year of construction: 1996, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Material support: Plastic battens, ejecting Measuring system: Scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Weight approx.: 1500 kg Dimensions: 6300 x 1500 x 2900 mm Motor power: 4.4 kW Prsdpfxevvkq Ho Adijd Storage location: Nattheim

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Storage location: Nattheim Podpfx Aevvkqgedijrd

Condition: used, Year of construction: 1992, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Bottom support: Fixed rollers Saw head pivoting: Manual Saw feed: Automatic Extraction: External extraction Approx. weight: 1500 kg Motor power: 5.5 kW Prjdpfevvkq Tex Adied Storage location: Nattheim

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Storage location: Nattheim Prsdpjvvkazsfx Adied

Condition: used, Year of construction: 1981, Wheel diameter: 800 mm, max. blade length: 5600 mm, min. blade length: 5450 mm, max. cutting height: 500 mm, max. cutting width: 780 mm, tilt-able table: yes, frame side: left, automatic motor brake: no, blade guide position: top and bottom, blade guidance: roller guide, design: stationary, working height or feed table height: 950 mm, weight approx.: 720 kg, dimensions: 1480 x 900 x 2440 mm, motor power: 4.0 kW, extraction diameter: 125 mm Location: Nattheim Psdpfx Adsvvkmnoierd

Condition: used, Year of construction: 1973, With a left-hand circular saw that can be swiveled to 45°. Cutting size: 2200 x 2500 mm. 3 motors, each with 4.5 kW. Both cross-cut saws can be swiveled to 45° - 90°, each with a scoring motor. All three saws can be driven up to 400 mm in diameter. Minimum cutting width: 210 mm. Both scoring saws are pneumatically displaced forward and backward. With vacuum suction cups for panel securing. Storage location: Nattheim Pjdpfovvkm Ijx Adierd

Condition: used, Storage location: Nattheim Prjdpfx Ajvvkrdjdiod

Condition: used, Max. blade length: 5600 mm Roller diameter: 800 mm Max. cutting height: 520 mm Max. cutting width: 770 mm Table tiltable: Yes Stand side: Left Stop ruler: Yes Saw blade guide: Roller guide Design: Stationary Weight approx.: 800 kg Psdovvkmuepfx Adijrd Storage location: Nattheim