Used Slitting And Cut To Length Line for sale (57,118)

Condition: good (used), Year of construction: 2017, For sale / on request: - Kaak Driem line 1 Fodpfxjy Rkrrj Al Segh - Kaak Proofer + Euroclima - Kaak Driem line 2 - AMF / Den Boer oven (direct high-temperature fired oven) - Stelram conveyors - Cooling tunnel + ICS chiller - 2x ABB pick and place robots - 2x Fuji packaging machines Total working width: 1200 mm Year of construction: 2017 Documentation and software available. Inspection on location possible. For any questions or remarks, feel free to contact us.

Condition: like new (used), Year of construction: 2014, operating hours: 4,036 h, functionality: fully functional, saw blade diameter: 500 mm, Paul C11 MKL Machine in excellent technical condition MAXI 6 Premium control system – supports over 15 languages Saw blade feeding mechanism with servomotor Fully optimized 4036 operating hours Fgsdpez N Dw Iefx Al Ssh 5 ejectors Machine ready for operation

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, blade shaft diameter: 240 mm, coil weight: 25,000 kg, type of input current: three-phase, input voltage: 400 V, product width (max.): 1,650 mm, sheet thickness stainless steel (max.): 5 mm, Stainless steel slitting line with NLT slitter-setup-robot — fully functional and in excellent condition. Basic Technical Specifications: - Material: Stainless steel - Material thickness: 0.3–3.5 (5 mm) - Material width: 400–1,650 mm - Line speed: max. 250 m/min. - Coil weight: max. 25 metric tons (unwinding and rewinding) - Coil outer diameter: max. 1,820 mm (unwinding and rewinding) - Coil inner diameter: 508 / 610 mm (rewinding with attachment) - Slitting shaft diameter: 240 mm - Blade diameter: max. 380 mm - Slitter drive: 201 kW - Rewinding recoiler drive: 212 kW Cutting capacity – stainless steel (max.): Thickness 0.3–1.0 mm: 25 strips Thickness 1.0–1.5 mm: 20 strips Thickness 1.5–2.5 mm: 14 strips Thickness 2.5–3.0 mm: 5 strips Thickness 5 mm: 2 strips System consists of: - 4-fold coil magazine - Coil car - Uncoiler with snubber roll – uncoiler movable - Paper winder - Strip edge control - Inserting device with bending roll - Pull-off stand - 5-roll straightening machine - Crop shear with scrap cart - Laminating frame - Slitter - Edge trimmer - 4-position blade changer - NLT slitter-setup-robot PRCS20 - Loop - Braking unit (plate) - Transfer table with separating shaft (automatic) Fgsdoztykgjpfx Al Soh - Recoiler - Coil car - 4-fold turnstile

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, working width: 1,800 mm, cutting height (max.): 30 mm, compressed air connection: 10 bar, An exceptional opportunity to acquire a fully integrated, high-performance automated multi-ply CNC cutting solution. Commissioned in August 2023 and kept in excellent condition, this complete VetiGraph / Serkon Makina setup is available for immediate purchase. Full UK delivery, professional decommissioning, transport, and complete onsite re-commissioning are all included to get your facility running quickly and smoothly. Get a complete factory upgrade at a fraction of the cost of new equipment. Package includes: * Serkon MC30 Multi-Ply CNC Cutter: 30mm compressed cutting height, 180cm width, continuous conveyor, drill and vortex knife cooling. * MN1 Fabric Spreader & ML2 Roll Lift: Automatic tension-free laying with a 9m x 2m air-flotation table. * Complete CAD/CAM Suite: Includes VetiGraph Pattern Design, Automated Marker Nesting, and FastJet Twin-Head Plotter. Fgodpfx Alez A D Ryo Seh * iDigit Photo Digitiser: Quickly converts physical patterns to vector files. Full Turnkey Package: Includes UK delivery, complete installation, fully setup commissioning, 7 days of total onsite training, and a 6-month warranty. Avoid long manufacturer lead times and substantial capital outlay. This complete system is ready for immediate inspection in Preston and fast deployment to your facility. Delivery & Installation: * For deliveries outside the UK, the machine is supplied on an Ex Works (EXW) basis. The buyer is responsible for arranging and covering the cost of international transport, import duties, taxes and any local delivery charges. * Installation and commissioning can be provided by our engineers at an additional cost. For overseas installations, additional charges will apply to cover engineer travel, accommodation and associated expenses. * Please contact us for a quotation for installation and commissioning to your location.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 200 mm, type of input current: three-phase, year of last overhaul: 2025, For sale: Metal Technika OWD-1600 Optimizing Saw / Cross-cut Saw, year of manufacture 2018. The machine is fully operational, ready for immediate use – ideal for fast cutting of components in serial production. A major advantage of this machine is its ability to set a cutting schedule for up to 8 positions: you simply set the dimension and the quantity, and the machine automatically performs cutting and proceeds to the next positions without the need for tool changes. Fjdjyv Ewmjpfx Al Sogh Technical Data: Model: Metal Technika OWD-1600 Year of manufacture: 2018 Maximum material width: 200 mm Maximum material height: 100 mm Maximum board length: 3200 mm Feed speed: approx. 30 m/min Saw blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: The machine operates efficiently – for example: - Batch of 8 boards, 12 mm thick each - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm) - Cycle time: about 10 seconds The machine can be inspected and tested on site. Location: Elbląg / Warmińsko-Mazurskie, Poland For further questions, please contact me.

Condition: good (used), For sale: Professional automatic cutting line for EPS (Expanded Polystyrene) blocks. Features & Specification: -Block storage / feeding magazine -Block tilter / inverter -Scrap / waste grinding system (bottom and side) -Horizontal cutting section -Contour / profile cutting section -Cross-cutter section Control System & Condition: The main electrical and control cabinet has been thoroughly modernized, with most components being -practically new. Controlled by a Siemens Simatic S7-1200 PLC. Maximum Block Dimensions: -Length: 410 cm -Width: 105 cm -Height: 130 cm Line Dimensions: -Cutting line length: 20 m -Block storage length: 6 m Fodpfx Ajzyyfksl Sogh -Total straight-line length: 26 m

Condition: excellent (used), functionality: fully functional, coil weight: 8 kg, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, total width: 1,250 mm, Slitting line for sale Fodpfjv Twi Rex Al Segh

Condition: used, Year of construction: 2002, functionality: fully functional, Homag Profi Line CHF 51/32/32 Panel Saw with Cut-Rite software optimization - Year of manufacture: 2002 - Cutting width: 3200 x 3200 - 3 tables with air curtain - Saw projection: 102 mm - Cutting height: 85 mm - Main blade 400 mm Fedpfxox Ey Nvo Al Ssgh - Main motor 11.2 kW (15 HP) - Incisor blade with independent motor

Condition: ready for operation (used), Year of construction: 2016, WEINIG OPTICUT S50 – OPTIMIZING SAWMILL Fgjdpfxez Du Hbs Al Ssh For sale: a professional Weinig OptiCut S50 optimizing sawmill. The machine is from 2016 and is in perfect technical condition. It is currently connected and operational, allowing for a demonstration during operation. Machine specifications: • Model: Weinig OptiCut S50 • Year of manufacture: 2016 • Overall length: 11.30 m • Width: 1.40 m • Condition: excellent • Machine connected and ready for operation • Available from 10.10.2026 The machine can be inspected and tested before purchase.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CFS EcoCut Cap 2 | Emulsifier / In-line micro-cut chopper Manufacturer: CFS Fsdpfxjy Ub E De Al Ssgh Model / Type: ECOCUT CAP 2 Serial number: 5000068187 POS 31 Year of manufacture: 2011 Power supply: 400 V / 3 phases / 50 Hz Rated current: 358.5 A Rated motor power: 204 kW Overall dimensions: 3300 × 2050 × 2850 mm Includes a pallet box with parts. The CFS EcoCut Cap 2 is an advanced, extremely powerful industrial emulsifier (in-line micro-cut chopper) manufactured under the CFS brand. This 2011 model is designed for continuous operation in high-capacity production lines, where it is crucial to obtain a perfectly smooth, stable emulsion and maximize the particle size reduction of the raw material. Equipped with a giant 204 kW motor operating at 358.5 A, this emulsifier easily handles the most demanding tasks, ensuring excellent disruption of protein and fat structures. It is an indispensable piece of equipment in the production of high-quality sausages, frankfurters, pates, mortadella, as well as in the pet food industry and in the production of ready meals and sauces. Key features and advantages: - Unmatched power (204 kW): The large power reserve allows for stable, multi-hour operation at maximum throughput, without the risk of overloading the drive, even with very dense product feeds. - Advanced Micro-Cut system: The in-line cutting system guarantees precise, repeatable cutting and homogenization. It enables the achievement of an ideal degree of emulsification, which improves the binding of water and fat, increasing efficiency and enhancing the texture of the finished product. - Automation and integration: The EcoCut Cap 2 model works perfectly in an automated process line, directly with mixers or kneaders, eliminating the need for manual transport of the raw material and accelerating the production cycle.

Condition: new, IDEAL 1080 Krug & Priester Guillotine-style Cutting Machine Ideal 1038 cutting machine Fodpfx Aox R Scxol Sogh Work material knife, bevel angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal films, thin sheets, and other materials Re-sharpenable knife set made of Solingen knife steel Complete with a solid base frame and foot pedal Fold-out side table, right Side guide with a scale in mm and inches Infinitely adjustable back guide with a locking screw Front guide with a locking screw and narrow-cut device Scale knob for precise adjustment of the front guide Printed DIN format scale from A3 to A6 Fixed, transparent knife guard made of shatterproof plastic and knife locking device Particularly stable knife bearing made of aluminum casting and double-mounted knife shaft for precise cuts Extremely robust metal construction GS tested safety mark Brand quality, Made in Germany Cutting length: 800 mm Cutting capacity: approx. 20 sheets (70 g/m² paper) - 4 mm clearance height Table size (W x D): 605 x 800 mm Dimensions (H x W x D): 1215 x 670 x 1080 mm Width with the side table folded out: 890 mm Weight: 55 kg Item condition: new ideal 1038 cutting machine You can find more cutting machines in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Machine specifications: Fsdpfx Aloypvdij Sogh - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm - Motor 13.5 kW - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Consisting of: 1. Cross chain infeed system 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL With side pusher and waste gate 5. Outfeed transport belt

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 700 mm, table width: 6,000 mm, OPTIMIZING AND DEFECTING CROSS-CUTTING LINE CURSAL MOD. TRV 2000E 700 SX Line configuration: - Motorized roller conveyor 6000 x 760 mm - Chain feeder with singulator (buffer magazine) for boards from 4500 mm up to 6000 mm, capacity 6 boards - Optimizing and defecting cross-cutting saw Cursal mod. TRV 2000 E 700 SX - Roller feed system - Blade diameter 700 mm Fjdpsywdx Ssfx Al Segh - Max feed speed 150 m/min - Cutting section 480 x 65 mm - Cutting section 530 x 30 mm - With chalk defect marking system - Year 2015 - Outfeed conveyor belt 5000 x 600 mm - Bilateral overhead ejector - N. 2 transfer conveyors for semi-finished parts (1 right + 1 left) - N. 2 accumulation roller conveyors (1 right + 1 left)

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm Fgsdpfxezf N Nis Al Soh 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: good (used), Year of construction: 2001, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 132, spindle speed (min.): 2,700 rpm, table height: 1,800 mm, table diameter: 800 mm, table width: 800 mm, table length: 200 mm, Profile saw for extrusion. Synchronized with profile speed and cuts… repeated cuts! Fjdpfx Alszw U Tqj Ssgh Ejection… piece counter.

Condition: excellent (used), functionality: fully functional, Slicing line Schomaker brand Consisting of: 1. Feed belt Plastic belt Belt width: 90 mm Overall dimensions of the feed belt: 1800 mm x 850 mm x 1200 mm Fgsdswatwiopfx Al Seh 2. Slicer Mesh belt Belt width: 250 mm Working width: 250 mm Overall dimensions of the slicer: 1120 mm x 1500 mm x 1700 mm 3. Output belt Mesh belt Belt width: 250 mm Overall dimensions of the output belt: 2800 mm x 550 mm x 1200 mm

Condition: like new (used), Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - width of the finished element min 700 mm - cutting height min / max - 20/140 mm - disc diameter 600 mm Fgjdemv Ehzjpfx Al Soh - spindle diameter 30 mm - engine power 2 x 7.5 kW - feed roller table 2570 mm width of rollers 500 mm diameter 100 mm - diameter of connections 2 x 160 mm 3 Multisaw Storti Multibi R 16 - material width max 150 mm - material height max 140 mm - engine power 2 x 22 kW - disc diameter max 300 mm - spindle diameter 50 mm - spindle height 160 mm - hydraulically adjustable feed - hydraulic side material pressure - two upper pneumatic clamps - connector diameters 2 x 220 1 x 160 mm - receiving conveyor 2000 mm - cross conveyor table 3200 x 1100 mm

Condition: like new (used), Brand:Waco Type:KS300 Complete cutting line Waco with 3 electropneumatic lengtstopper in and out feeding conveyor 3+2meter Techn info: Max saw balde 400mm Max cutting hight 70mm Motor 5,5kw, 400 volt, 50 Hz, 3 phase Electropneumatisc control of saw blade and length stopper, Stock no:2000596 Fedpjh Ek N Ajfx Al Sjgh Size for transport: Saw 120x105x215cm (lxwxh) Conveyors:300x80x35cm Total weightt:350 Kg

Condition: used, Year of construction: 2016, machine/vehicle number: IDC000246, saw blade diameter: 700 mm, cutting height (max.): 225 mm, power: 13.5 kW (18.35 HP), Wood Optimizing Cross-Cut Saw Manufacturer: WEINIG / WEINIG DIMTER OptiCut S60 Year of Manufacture: 2016 (fully serviced in 2026) Professional optimizing cross-cut saw for precise and efficient wood processing. Applications: Pallet manufacturing Wooden packaging production Furniture manufacturing Fsdozkim Sopfx Al Segh Sawmills and carpentry workshops Technical Specifications: Max. cutting height: 225 mm Saw blade diameter: 700 mm Saw motor: 13.5 kW Positioning drive: 5.1 kW Material length: 400–6300 mm Material width: 40–300 mm Material thickness: 15–225 mm Finished length: 80–4800 mm Features: Automatic measuring and positioning Automatic feeding with 9-row cross conveyor Laser length detection Pneumatic workpiece clamping Touchscreen control Positioning accuracy up to ±1 mm Workpiece weight up to 250 kg High productivity and reliable WEINIG quality

Condition: excellent (used), Year of construction: 2020, Complete forming to freezing line Excellent condition Upgrade your food production with our comprehensive burger, nuggets, and patties production line! From forming to IQF freezing, this line covers all stages with top-tier equipment from ALCO, JBT, and Schomaker. Watch to see our complete production line in action: Forming Machine: ALCO / JBT AFM 400 PC Breader: ALCO / JBT APN 400 Battering Machine: ALCO / JBT ASC 400 Meatballs Machine: Schomaker-tec BRU 600-488 Shuttle Conveyor: Schomaker (400 to 600 mm transfer) Fryer: Schomaker Oil Management System: Schomaker Fjdpstykvhofx Al Segh Linear Oven: Schomaker Shuttle Conveyor: Schomaker (600 mm to 400 mm transfer) Key Features: High efficiency and precision Comprehensive solution from forming to freezing Advanced technology ensuring product quality Contact us for more information and inquiries:

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Fgsdpfsyh Hc Rox Al Soh

Condition: like new (used), Year of construction: 2025, functionality: fully functional, COST-CUTTING OPTIMIZING SAW The Supercut 500 is a high-speed optimizing saw designed to deliver maximum production capacity with outstanding reliability. EXTREMELY ROBUST The machine features a highly robust, reinforced steel frame. The infeed belt conveyor is synchronized and driven by the same motor as the feed rollers. An exclusive system ensures solid double-sided top and bottom traction. The upper feed system includes three hardened, toothed drive rollers and six idle pressure wheels (in three pairs). Each toothed roller's rise and descent are managed by numerical control. TECHNOLOGICALLY INNOVATIVE The electronic system integrates a computer directly connected in real time to a next-generation CNC (numerical control unit). The TROPTIM software runs on Windows and offers full management of up to five wood grades. Equipped with a 22” color LED display, remote internet teleservice, and integrated Excel macros. Fsdpfey Iz Hnjx Al Sjgh FAST An innovative cutting system achieves such high speed that the blade is almost invisible during operation. Rapid, comprehensive optimization with a compact overall footprint. Feed system equipped with an 18 Nm brushless servo motor. Cutting system uses a 28 Nm brushless servo motor. Saw blade power: 7.5 HP (5.5 kW). Eight idle rollers positioned under the belt of the infeed conveyor. CUTTING DIMENSIONS Cutting section: min. 30x15 mm, max. 220x60 mm. Minimum workpiece length before cutting: 500 mm, maximum: 5000 mm (up to 6000 mm with optional support rollers). Capability for a single cut in the last 190 mm of the board. Suitable for boards of regular profile with a maximum thickness variation of 8 mm. Maximum timber weight: 50 kg.

Condition: used, Coil Sheet Metal Cutting Line – CARBONINI SLER 1500 RIG – Year 2009 Industrial CARBONINI coil processing and sheet metal cutting line, designed to perform coil unwinding, sheet metal straightening, notching and cutting operations. The line is capable of processing sheet metal with a maximum working width of 1,500 mm and a declared maximum thickness of 2 mm. The system consists of several processing units arranged in sequence for sheet metal preparation and cutting. Line Configuration 1. Coil Decoiler Unit designed to support and unwind sheet metal coils, feeding the material into the processing line. 2. Sheet Metal Straightener Straightening unit designed to correct deformations in the sheet metal as it is unwound from the coil, preparing it for subsequent processing operations. 3. Notching Unit Unit designed to perform notching operations on sheet metal according to specific production requirements. 4. Shearing Unit Cutting unit designed to cut sheet metal to the required dimensions. Main Features Fodpfxez Nz S Ne Al Sjgh Maximum working width: 1,500 mm Declared maximum sheet thickness: 2 mm Complete system comprising a coil decoiler, sheet metal straightener, notching unit and shearing unit. Heavy-duty industrial construction with protective guards around the operating units. Electrical control cabinet and operator control station visible in the photographic documentation. Machine Identification Details Manufacturer: CARBONINI Model: SLER 1500 RIG Year of manufacture: 2009 CE marking: Present on the manufacturer's identification plate Weight indicated on the identification plate: 6,200 kg

Condition: used, Year of construction: 2013, functionality: fully functional, One side scanner for sorting or optimization: Width: 30-200mm High: 13-50mm Length: 2-6m Fsdev Tlgdjpfx Al Sogh Possible to detect: Knots, wood structure, cracks, end cracks, color variations etc. Scanning speed: up to 200m/min Possible to scan different profiles

Condition: excellent (used), Year of construction: 2022, operating hours: 5,000 h, functionality: fully functional, OptiCut S 50+ optimizing saw - Feeding system with transverse conveyors and automatic pusher - Outfeed conveyor belt with 2 zones, including ejectors and tables, one of which is foldable - Saw motor: 7.5 kW Fjdpfx Ajzkbmdel Ssgh - Boards/planks up to 5 meters long can be fed into the machine. - Maximum cutting cross-section: 270 x 100 mm Additional technical information and a video are available upon request.