Used Spiral Blades for sale (5,845)

Condition: like new (used), Kemper SPL 50 80KG dough spiral mixer in good working condition for further questions please sent an request! Godpeumnkzjfx Ag Nouh

Condition: like new (used), Year of construction: 2005, operating hours: 7,000 h, ONLY PRODUCED FOR 7000HRS Overall Belt width - 660mm Effective Belt width - 610mm Belt length/Tier - 13.28 Effective Belt length - 478.08 Effective Belt area - 245.95m2 Tiers - 36 Tier pitch - 145mm Maximum product height - 73mm Godperfclqsfx Ag Nouh Drum Diameter 2905.76mm EVAPORATOR Duty - 210kw Evap Temp - -40c Installed power - 32.55kw Infeed Height - 800mm Outfeed Height - 6200mm Infeed/Outfeed Length - 200mm Full CIP covering all areas. Absolutely mint condition. GEA GRASSO PLANT COMPLETE WITH AIR COOLED CONDENSOR 240KW DUTY. AGAIN ONLY 7000HRS RUN TIME REVERSE CYCLE DEFROST AFTER 120HRS WITH WATER SPRAYBARS.

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Gjdpfx Asxliguog Njuh Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2024, Vanhold 630 - spiral planing shaft, 5 rows of knives, diameter 125 mm, - knife dimensions 15x15x2.5mm -two pulling rollers in the table - divided insertion roller, divided wedge -table length 120cm -table lifted on 4 screws -table surface hardened -electric lifting of the table and electronic positioning of the table to the set height -electronic display of the height of the processed material -max. planing height 30cm - minimum material length 30cm - main engine 7.5 kW - feed motor power 1.5kW - diameter of exhaust connections 150mm x 2 - external dimensions width 1150mm x length 1300mm height 1520mm Gjdpfxot E R H Ns Ag Njuh - spindle speed 5000 rpm -feed speed from 6 to 18m/min, inverter Machine weight 1250kg New machine, spiral shaft, 2 pulling rollers in the table. Documentation, CE. Available immediately, in stock.

Condition: new, Year of construction: 2025, For Sale: Spiral Sand Washing Machine - Contact Us 24/7 CONSTMACH Spiral Washers stand out in the industry with their high capacity and superior performance. Whether for sand screening and washing or gravel and crushed stone washing, they are designed to process all types of fine materials with maximum efficiency. The sand washing machine provides long-lasting use with its heavy-duty steel plate construction and durable body. With easy maintenance and quick spare part replacement, it allows continuous operation without causing downtime in your business. It offers superior cleaning, especially when processing gravel, sand, or crushed stones containing excessive clay and dirt. The heavy-duty gearbox designed by Constmach experts and the replaceable bolted cast white iron wear shoes extend the machine's service life and reduce maintenance costs. These machines, offered in single or double shaft configurations, provide solutions for every need with various size and capacity options. For instance, the CHY 50 model offers a capacity of 25-45 m³/hour with 5.5 kW motor power, while the CHY 80 model provides a capacity of 50-90 m³/hour with 2 x 11 kW motor power. These models also differ according to water requirements, allowing you to use your business's water resources most efficiently. Achieve perfect results in your sand washing and gravel washing operations with CONSTMACH Spiral Washers. Equipped with quality materials, these machines increase your business's efficiency by providing long-lasting use and high performance. With the assurance of the Constmach brand, superior technology, and durability come together. Take your operations to the next level with these exceptional machines. CHY 50 Spiral Sand Washing Machine Technical Specifications: Dimensions: Φ 500 x 5,000 mm Motor Power: 5.5 kW Capacity: 0-3 mm: 25 m³/hour 0-7 mm: 45 m³/hour Rotation Speed: 24 rpm Water Requirement: 25-45 m³/hour Weight: 2,800 kg CHY 60 Spiral Sand Washing Machine Technical Specifications: Dimensions: Φ 600 x 6,000 mm Motor Power: 2 x 7.5 kW Capacity: 0-3 mm: 40 m³/hour 0-7 mm: 75 m³/hour Rotation Speed: 20 rpm Water Requirement: 35-55 m³/hour Weight: 5,200 kg CHY 75 Spiral Sand Washing Machine Technical Specifications: Dimensions: Φ 750 x 7,500 mm Motor Power: 2 x 7.5 kW Capacity: 0-3 mm: 45 m³/hour 0-7 mm: 80 m³/hour Rotation Speed: 20 rpm Water Requirement: 40-60 m³/hour Weight: 5,800 kg CHY 80 Spiral Sand Washing Machine Technical Specifications: Dimensions: Φ 800 x 8,000 mm Motor Power: 2 x 11 kW Capacity: 0-3 mm: 50 m³/hour 0-7 mm: 90 m³/hour Rotation Speed: 20 rpm Water Requirement: 45-65 m³/hour Weight: 6,250 kg Gusdpsud Srcefx Ag Njh

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. Godpsq Nf S Refx Ag Njuh 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: like new (used), Kemper SPL 50 for 80KG dough Spiral mixer in good working condition for further information please sent an request Guedpfxsumnyij Ag Nsh

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Godpfx Agexlfwpe Nsuh Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: like new (used), Kemper SPL 30 for 50KG Dough Spiralmixer in very good working Condition if yoi have further questions please sent an request Gjdpfeumnidex Ag Nsuh

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Frequency - 50Hz Gsdpfx Agsxiv Ugo Neuh Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: excellent (used), Kemper Sp75L Spiral Mixer for further information please send an message Gsdpfx Agekzkure Neuh

Condition: excellent (used), Kemper Eco 50 Spiral Mixer For further information please send an message Gsdpskzkrhofx Ag Neuh

Condition: excellent (used), machine/vehicle number: 958-008, Diosna double spiral mixer and dough chunker. MIXER: 1 x Diosna double spiral mixer with bottom discharge and supplied with 2 x bowls. This unit is able to connect to silo and dosing systems.  Technical specification ⚙️ ✅ Model - DSP 280E.  ✅ Serial number - 958-008.  ✅ Bowl capacity - 280 kg dough.  ✅ Electrical requirements - 400 V / 50 hz / 3 phase.  Gujdexni Drjpfx Ag Neh ✅ Power - 49.2 kW / 87 Amps.  CHUNKER: 1 x Diosna dough chunker.

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Gujdpfjpq If Dox Ag Njh Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 11/2026, Spiral Mixer Diosna SP 120 D Diosna Model: SP 120 D Mobile kneading machine 2 timers, 2 speeds Stainless steel bowl Flour dust cover For up to 120 kg dough Dimensions: 800 x 1270 mm (W x D) Connection: 400 V, 32A-CEE plug Used machine, cleaned Options: Maintenance contract Service package E-Box for increased safety! Guodpfjxmrbwsx Ag Nsh Delivery service Instruction & commissioning Visit us!

Year of construction: 2017, condition: good (used), Spiral conveyor, 3 infeeds and 1 outfeed, height approx. 11m – used – Godexhgftepfx Ag Neuh Price ex location: €9,500 (net), dismantled, packed and loaded! Manufacturer: to be provided Type: to be provided Year of manufacture: 2017 Floor heights to be provided Crates/cartons were conveyed down from levels 1, 2, and 3 of the pick tower and then transferred at approx. 3m height to the sorter Floor heights approx. 3.50m, 7m, and 10.50m Condition: good Available: from approx. mid-November 2025 Location: North Rhine-Westphalia (NRW)

Condition: new, new spacer rings of different thickness for PAUL KME 2 and BM, with bore 75 mm, new carbide tipped saw blades 300 Ø and 380 Ø x 75 Ø, new CV saw blades hard-chrome plated different Ø Guodoh Anyfepfx Ag Njh

Condition: good (used), Plate shears cutting blades, replacement blades for plate shears, replacement cutting edges, cutting blades, shear blades Godpfsxf Dpkox Ag Nouh -Cutting blades. Replacement blades for Atlantic ATS 3006 guillotine shears, 2 pieces -Cutting length: 3120 mm -Hole spacing: 195 mm / M14 see photos -Dimensions: 49/19/3120 mm / 49/19.4/3120 mm -Price/Delivery: complete -Transport dimensions: 3200/120/H190 mm -Total weight: 57 kg

Condition: reconditioned (used), Diosna SP 160 AD Spiral Mixer with 2 bowls - 2 timers, 2 speeds - 160 kg dough capacity - after refurbishment - 2 acid-resistant stainless steel bowls - perfect condition Gjdpfsw Hm Aljx Ag Nsuh - possibility of part exchange with another machine

Condition: excellent (used), Planspiral.lathe chuck Auto Strong Diameter 310 mm Mounting Camlock size 8 Cone diameter 139,735 6 stud diameter 25,4 Pitch circle diameter 171,4 Gedeln Uixepfx Ag Neuh Chuck height including flange 135 mm Weight 53 kg

Condition: good (used), San Cassiano SE80 Spiral mixer Gusdetu N Apopfx Ag Noh Removable bowl spiral mixer, 80Kg capacity bowls, two bowls, timer settings, forward / reverse, 3Ph

Condition: used, Circular saw blade or grooving saw in very good used or like new condition. D: 250 mm keyway: 20 mm diameter: 250 mm Gujdpfxswrrdrj Ag Njh drilling: 70 mm width: 6,0 mm knife: 20 + 2 d: 70 mm B: 6,0 mm Z: 20+2

Condition: excellent (used), 1 set of spiral base jaws (28539) Dimensions, see photo Gsdpoud Sk Ejfx Ag Njuh

Year of construction: 2001, condition: used, Sottoriva Gusdpfx Agedqapbs Nsh Sprint 30 serial: B31656 2001, 30L spiral mixer, variable speed, stainless bowl and contact parts, safety guard, with timer

Condition: excellent (used), Four-jaw spiral chuck diameter 315 mm chuck height flute 125 mm short taper chuck size 6 taper diameter 106,39 mm pitch circle diameter for stud 133.4 mm 4 stud bolts M 12 Accessories : 1 chuck key Gsdpolguy Sofx Ag Nsuh 1 set of hard drilling jaws 1 set of turning jaws hard Weight 103 kg Transport dimension : W800 x D.600 x H.550 mm