Used Stromab Tr 450 for sale (61)

Condition: new, Available in working lengths of 3000 - 4500 - 6000 and 7000 mm lengths Reversible Left or Right direction Cedpfx Aon Nv Ugedaohd Anodised aluminium profile 105x 90 mm Reinforced 32 mm toothed belt Single phase motor 6 Nm 115 - 230 v Positioning speed 60 m/min Repeat precision +/- 0.1 mm Smart 7 touch screen colour control unit 7" display 3 working mades Manual for Absolute or Incremental working, Preset with 8 pre set positions and Automatic cutting list mode, USB port for importing cutting lists

Condition: new, Year of construction: 2024, saw blade diameter: 500 mm, cutting height (max.): 175 mm, Aluminum arm Unit runs on linear guide rails Consistent zero point even when the cutting angle is changed Automatic pneumatic opening of the saw blade guard Return spring for resting position return of the saw unit Support table equipped with a replaceable MDF sacrificial plate Complete machine operation from the front Codew S Ddcopfx Adashd Motor: 400V/3/50Hz, 5.5 HP (4 kW) Total weight: 320 kg Machine comes complete with: TCT saw blade Ø 500 mm, bore 30 mm Motor speed: 2800 rpm Horizontal swiveling: +60° / 0° / -45° Vertical tilting: 0° to +45° Horizontal swiveling lock pneumatic Dust extraction port: 150 mm Cutting width with horizontal swiveling: At 90°: 600 mm At 60° (rotation): 300 mm At 45° (rotation): 420 mm Cutting height with vertical tilting: At 0°: 175 mm At 15°: 130 mm At 45° (bevel): 100 mm.

Condition: used, Year of construction: 1999, cutting height (max.): 210 mm, cutting width (max.): 460 mm, PNEUMATIC ADJUSTABLE CHAINSAW: Brand: STROMAB Type (Model): PS 600/P Serial No.: 990460 Year: 1999 MAKING CAPACITIES: - Maximum wood cross-section: 210 x 460 mm (thickness x width) - Adjustable arm (pivot): -45 to +40° - Cutting capacity pivoted at 45°: 210 x 325 mm max FEATURES: - CE marked - Pneumatic front arm feed Cedpfxorx Tato Adaohd - Lockable disconnect switch, push-button stops - Main power supply: 380V Three-phase 50 Hz - Saw motor power: 7.5 kW (10 hp) IN 16.5 A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm Bore: Ø 30 mm, Ø 4.2 mm thick - Table height (working height): 880 mm - Main wooden table: 1100 x 710 mm, with 2 pneumatic pressure gauges - Pneumatic power supply: 6 bar Estimated consumption: 28 nl - Extraction inlet: Ø 150 mm Recommended flow rate: 1350 m3/h, 20 m² Dimensions: 1700 x 1500 x h. 1900 mm Weight: 630 kg Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine offered without any special servicing required

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 240850, overall weight: 1,600 kg, working length: 7,000 mm, clamping range: 1,350 mm, It was in working condition until it was replaced, hasn't been used for years. Has been stored in dry conditions is a shed, outside temperature, there has some rust appeared and needs maintenance. If you have any questions don't hesitate to ask! Workpiece max length 7000mm, max height 1350mm. Cedpfx Adswxvc Soajhd

Condition: used, Stromab Cutting Machine for Boards up to mm. 250, height mm. 100 Chedornbnkspfx Adasd

Condition: excellent (used), STROMAB CT800 Beam Cutting Centre A cutting centre for beams with large cross-sections, making it the optimal solution for carpentry and timber frame construction. With electronically controlled 5-axis technology, it meets all requirements for straight, inclined, and compound cuts. It guarantees maximum processing speed and finished product quality while reducing labour requirements and maximizing productivity. The CT800 can process beams of any length, with cross-sections ranging from 120×45 mm to 290×280 mm. Beam movement system with driven rubber wheels and pneumatically tilting upper clamps. Specification: Motor power: 18 kW TCT saw blade: 800 mm Number of electronically controlled axes: 4 Saw table rotation: 0° ÷ 340° Table rotation speed from 0° to 340°: 18" Blade angle: 90° ÷ 45° Positioning speed: 0 ÷ 17 m/min Cutting range: At 90° with single stroke: mm 280×290 / 250×390 / 200×450 At 90° with table movement and repeat cutting: mm 280×770 / 250×840 At 45° with single stroke: mm 200×210 At 45° with table movement and repeat cutting: mm 200×760 Chedewtw Avjpfx Adaod Maximum longitudinal cutting height: mm 300

Condition: used, Year of construction: 2014, Stromab CT600 Automatic Upstroke Crosscut Saw for Straight and Angled Cutting - 2014 CE 6000mm infeed capacity 2000mm Outfeed table 12" Touch screen graphic display Power 1000 controller Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. 5 optimising criteria - longest size, minimum waste, priority size, by volume or by value. Cutting list entered via controller key pad Chjdpfowl Hyuex Adajd Graphic description of the workpiece. 10hp motor Rack & pinion drive system for pusher with magnetic reading strip to give a high level of  repeat cutting accuracy 600mm diameter blade CUTTING CAPACITY POSITION A) # max height At 0°: mm. 200x215 or 50x370 At 30°: mm. 200x185 or 50x325 At 45°: mm. 200x150 or 50x265 CUTTING CAPACITY POSITION B) # max. width At 0°: mm. 160x315 or 40x410 At 30°: mm. 160x270 or 40x350 At 45°: mm. 160x220 or 40x285 Angle setting -70 degrees, 0 degrees, + 70 degrees Adjustable saw stroke speed Vertical clamping Horizontal clamping Dust extraction 1 off 100mm, 1 off 120mm. Plexiglass hood with gas springs Year - 2014 CE

Condition: used, SECOND-HAND RADIAL ARM SAW STROMAB Chodpfx Adjwr T Hbsaed

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: Chsdpfx Aehw Ng Iedaed PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: good (used), Year of construction: 2001, Stromab PS50/0 Motor 5.5 kW Chedpfx Adowk H Txjaod Saw blade diameter: 500 mm Saw blade can pivot Left side: 4,500 mm roller table with stop Right side: 3,000 mm roller table with stop

Condition: new, Year of construction: 2023, Pressing area: 3000 mm x 1800 mm Number of manual hydraulic cylinders vertical: 4 Number of manual hydraulic cylinders horizontal: 2 Press pressure: 1500 kg Machine length: 4000 mm Chedpfx Asiwfhwsdaed Machine width: 750 mm Machine height: 2250 mm

Condition: excellent (used), Stromab SL-2 11500mm vertical press Maximum working length 11500mm Chjdpfxetxbqaj Adasd Maximum height of gluing 1200mm Maximum width of glued beam 200mm Number of vertical presses 23 Number of frontal clamps 9 Top and frontal pressures hydraulic Diameter of vertical cylinder 70mm Vertical cylinder pressure 7300kg Pressure per cm2 with a beam width of 150mm 9.7kg Pressure per cm2 with a beam width of 200 mm 7.3kg CE certificate

Condition: like new (used), Year of construction: 2023, 350mm max saw diameter 890mm crosscut capacity 95mm max depth of cut 4hp motor Csdpfxowl Hxde Adaohd Swivelling and canting facility with fixed locking at 45 degrees Spring return for saw unit MDF table Year - 2023 CE Condition - Never been installed. Condition almost as new

Condition: like new (used), electronic adjustment of blade tilt 90° – 45° maximum cutting width: 650 mm electronic adjustment of saw height automatic material feed touch control panel laser rotating work table 0° – 345° maximum blade diameter: 800 mm motor power: 16.6 kW year of manufacture: 2016 Cedpfxjxfr Ete Adaohd CE marked 400 V

Condition: new, Year of construction: 2024, functionality: fully functional, saw blade diameter: 600 mm, OPTIMIZATION CROSS-CUTTING SYSTEM WITH ROTATING SAWING UNIT CT600 / 6000 max. blank length 6,000 mm Cutting dimensions unit position A At 0° 200x215, 50x370 mm At 30° 200x185 mm, 50x325 mm At 45° 200x150 mm, 50x265 mm At 80° 200x35 mm, 50x63 mm Cutting dimensions unit position B At 0° 160x315, 40x400 mm At 30° 160x270 mm, 40x350 mm At 45° 160x220 mm, 40x285 mm At 80° 160x52 mm, 40x70 mm Min. workpiece thickness 10 mm (with automatic feeding 20 mm) Support table inclined at 8° Slider stop side on the right Technical data saw unit: Aggregate completely rotatable with table Motor 7.5 KW, 400 Volt, 50 Hz HM saw blade diameter 600 mm, F=30, Z=60, S=5 Cutting cycle duration approx. 4 sec. Automatic rotation of the aggregate -70° to +70° Saw aggregate rotation -80° to +80° on request Rotation of the aggregate from 0° to 70° in approx. 1.3 sec. Positioning accuracy +/- 0.2° Hold-down system consisting of 2 pneumatic Pressure cylinders with mounted pressure rail Side pressure plate system with electronic control Technical data slider system: Chsdpfxov Aub Ne Adajd Feed via gear/rack system with "brushless" motor Positioning accuracy +/- 0.4 mm Power of the feed motor suitable for pushing a package weight of 80 kg Max. feed speed 90 m/min. Pneum. slider lift after completion of the cutting cycle and return above sliding level Control: 12 inch "touch screen" BECKHOFF professional PC with WINDOWS operating system USB port Ethernet port Loading and saving machine data via USB Editing cutting program directly on the input unit Transferring cutting lists via USB or Ethernet Direct import of .btl (10.4) format files Working software: Up to 1000 cutting lists with up to 11 different cutting dimensions or 1 list with 10000 different cutting dimensions. Cutting dimensions in sequence Cutting cycle with 4 optimization options (Max. length, min. waste, sequence, length priority) Graphic display of the workpiece Additional options installed: ZA110 discharge table (per meter) ZA040 saw unit table rotation 80°

Condition: used, Stromab TR350 chop saw IDC000098 - complete with filter Codpfxju Dhzij Adashd - with roller conveyors

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Hydraulic presses for gluing of construction timber, blockboards Small space requirement and front loading Chassis on wheels, two of which are steerable are steerable Height-adjustable hydraulic cylinders with practical and functional Vertically adjustable uprights with frame pressing device Technical data: Work surfaces: 1 Usable dimensions: 2500 x 1800 mm Cedpfjkwhb Hex Adashd Number of vertical hydraulic cylinders with manual adjustment: 3 Number of horizontal manual hydraulic cylinders: 2 Travel of hydraulic cylinders with manual adjustment: 60 mm Pressure of the hydraulic cylinders with manual adjustment: 1500 kg Positioning dimensions approx. 3200 x 800 x 2200 mm Location: Hochheim Availability: short term

Condition: used, Year of construction: 2021, Drawer Clamping Machine – STROMAB STC 2500 B Technical Description: • Working capacity: 2100 x 1000 mm • No. 2 working stations • Two-hand safety control button • No. 8 pneumatic cylinders, diameter 115 mm Csdpfxjxg I Slj Adajhd • Thrust per cylinder: 700 kg • No. 8 cast iron squares, height 170 mm Machine Configuration: • Frequency: 50 Hz • Standards: CE compliant • Electrical supply: 400 V – three-phase

Condition: ready for operation (used), Technical characteristics Csdpfxor A Ulke Adashd Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 600 mm, working height: 900 mm, saw drive: 7,500 W, Mitre saw adjustable to 45° equipped with 6-meter pusher discharge deck with 6-strand loading chains for faster loading machine overhauled and fitted with a new digital touchscreen Cjdpfx Adewzg E Noaehd

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Chjdpfjvz H Apex Adajd Weight 650 kg Total power requirement 7,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Chodovz H Aijpfx Adasd Weight 300 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 290 kg Total power requirement 4 kw Cedpfx Adovz H Acoaohd

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4500x1200x1200 mm Chjdsvz Hz Eepfx Adaod Weight 1500 kg Total power requirement 8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Chjdpfxevz Eq Se Adaed Weight 0 kg Total power requirement 0 kw