Used Suction Tube for sale (4,307)

Year of construction: 2016, condition: used, Serial no. 15-3599B, primarily comprising: feed station with 2 product lines, continuous cycle conveyor, 2 forming stations, turning station, micro-lubrication station, through-feed washing machine, Manufacturer: Bous, Model: Duwamat K1000 WSST, Year: 2016, Serial no. 2800, 3 tanks, tank capacities: 485/485/715 l, heating capacity 16–24°, fine filter, oil separator, control cabinets, system control with operator panel, Manufacturer: Siemens, Model: SIMATIC HMI touch, inspection system with 2 cameras, Manufacturer: KEYENCE, Model: Vision System, eddy current testing device, Manufacturer: Rohmann, Model: Elotest IS500, laser marking system, Manufacturer: Videojet, Model: 7510, fiber laser, laser power 50 W, discharge station, roller conveyor system for crate removal, 2 product lines, satellite terminals, switch cabinets, safety devices, plexiglass enclosure, peripheral units, including extraction system, Manufacturer: ESTA, Model: Whispersog 2.2 JET, overnut feeder with loading bunker, vibrating bowl feeder, separation unit, loading station, set of trolleys, set of load carriers, trolleys. Ljdpey A Ih Uefx Aiwoab Subject to prior sale.

Condition: used, Used Kleiser GmbH approximately 16sqmt horizontal shell and tube heat exchanger. Unit has (68) 316L stainless steel tubes approximately 3,000mm long x 25mm outside diameter, rated 6 bar design pressure at 100 deg.c. 316Ti stainless steel shell approximately 3,000mm long x 324mm diameter, rated 6 bar design pressure at 100 deg.c. (2) 316Ti stainless headers. Unit has 2 support mounts. Ledpfeyh I Unjx Aiweab Weight: Estimated: Kg 690.0

Condition: used, Unused approximately 15 square metre vertical shell and tube heat exchanger. Unit has approximately 17.4mm diamater x 2000mm long stainless steel 316 tubes. Unit has a design pressure of 6.0 bar / full vacuum shellside and 10.0 bar / full vacuum tubeside. Unit has a design temperature of 150°c. Unit has a stainless steel 316 shell approximately 2000mm diameter x 330mm straight side. Unit has mounted side support lugs for easy usage. Unit is designed to ASME VIII standard. Weight: Actual: Kg550.0 Dimensions: 650 X 3000 Ledpfx Aoyh I Uhsiwoab

Year of construction: 2022, condition: new, Lundberg WasteTech 400 All-in-one Unit for Trim Edge Extraction Maximum extraction capacity: 6,000 m³/h (3,540 CFM) Maximum pipe diameter: 315 mm (1’-1”) Maximum extraction distance: up to 30 m (100’) Dimensions (LxWxH): 2615 x 1300 x 3330 mm (8’-7” x 4’-3” x 10’-11”) Weight: 615 kg (1,356 lbs) Extraction fan power: 15 kW (20 HP) Power connection: 3-phase, 230-460V, 50-60 Hz Noise level: 68-72 dB(A) Lajdey Sbc Rjpfx Aiweb Colour: blue, RAL5010 Including the following accessories: Antistatic unit M5/M6 filter incl. pressure monitoring sensor WT400 frequency converter Bag level sensor TubeBag System (continuous bag) According to the manufacturer, simultaneous extraction from up to 24 trim edges is possible. The unit is in as-new condition and was only operated for a few hours. On-site inspection is possible. Original purchase price of the system approx. €65,000 incl. accessory options.

Condition: excellent (used), mileage: 659,000 km, power: 315 kW (428.28 HP), first registration: 05/2003, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 4,190 mm, fuel: diesel, fuel tank capacity: 430 l, brakes: retarder, color: orange, driver cabin: day cab, gearing type: semi-automatic, number of gears: 16, emission class: euro3, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space volume: 16 m³, Year of construction: 2003, Equipment: ABS, air conditioning, cruise control, differential lock, electric window regulation, power mirror, retarder, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - 8,000 kg Front Axle - 430 Liter Diesel Tank - Aluminum Fuel Tank - Heated Mirrors - Comfort Driver's Seat - Differential Lock - Differential Lock - EPS with Clutch - High Beam - Speed Limiter - Battery Master Switch - Hydraulic System - Lift Axle - Radio/CD Player - Beacon Lights - Sun Visor - Toolbox - PTO (Power Take-Off) - PTO (Power Take-Off) - ZF Intarder - Towing Hitch = Notes = GOOD CONDITION MERCEDES-BENZ ACTROS 2543L V6 6x2 CHASSIS WITH MULLER F155 EGH VACUUM TANK & RETARDER!! 430HP, V6 ENGINE!! EPS WITH CLUTCH (3 PEDALS)!! RETARDER!! ADR/VLG (FL - AT)!! LIFT AXLE!! P.T.O.!! ETC.!! MULLER F155 EGH VACUUM TANK!! HYDRAULIC SNAKE ARM!! HIGH PRESSURE WATER PUMP!! ETC.!! TRUCK IS IN GOOD WORKING AND DRIVING CONDITION, READY FOR THE JOB!! MORE MERCEDES-BENZ 4x2 / 4x4 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS AVAILABLE IN STOCK!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of Cylinders: 6 Engine Displacement: 11,946 cc Transmission Transmission: EPS WITH CLUTCH (3 PEDALS), 16-speed, Semi-automatic Transmission Axle Configuration Brakes: Disc Brakes Front Axle: Tire Size: 385/65R22.5; Max. Axle Load: 8,000 kg; Steering; Left Tire Tread: 50%; Right Tire Tread: 50%; Suspension: Leaf Spring Rear Axle 1: Tire Size: 315/80R22.5; Twin Tires; Differential Lock; Max. Axle Load: 11,500 kg; Inner Left Tire Tread: 20%; Outer Left Tire Tread: 20%; Inner Right Tire Tread: 20%; Outer Right Tire Tread: 20%; Reduction: Single Reduction; Suspension: Air Suspension Rear Axle 2: Tire Size: 315/80R22.5; Lift Axle; Max. Axle Load: 7,500 kg; Left Tire Tread: 30%; Right Tire Tread: 30%; Suspension: Air Suspension Weights Unladen Weight: 16,540 kg Laodjytxu Sspfx Aiwob Payload: 9,460 kg gross Vehicle Weight: 26,000 kg Functional Body Make: MULLER F155 EGH VACUUM TANK Condition Technical Condition: Very Good Visual Condition: Very Good Further Information Please contact Sales Department or Erik Engel for further details.

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 1,400 m³/h, arm reach: 2,000 mm, Welding fume extractor, dust extraction unit, self-cleaning, pneumatic, vacuum filter by Plymovent Model: The Smart "ONE" Laedpfx Aoy Shb Hoiwjb Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter element in very good condition. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. 1.1 kW three-phase fan Capacity up to 1400 m3/h Filtration surface: 20 m2 Wall-mounted extraction arm, 2 m length Stock number: 1135

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, pressure (max.): 250 bar, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Lajdpfx Ajng Exaeiwjb Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible Lsdpfx Aonh R Ekoiwsab - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, bending radius (min.): 9 mm, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via Lasdpfx Aiondn Agjwsb the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, pipe diameter (max.): 35 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 360 °, bending radius (max.): 150 mm, bending radius (min.): 32 mm, overall weight: 28 kg, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection Ljdpfx Asnfvx Njiwjab - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment Lodpfx Aijndk N Aowsab (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop Ljdpfxong Amks Aiweab OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction Laedpfong A R Ssx Aiwsb TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: 1018, control type: PLC-controlled, degree of automation: manual, actuation type: electric, pipe diameter (max.): 50 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, warranty duration: 24 months, Equipment: CE marking, emergency stop, foot remote control, quick-change device, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC Lsdpfxenfvy Uo Aiwsab - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 100 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 8 mm, bending angle (max.): 195 °, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB Ledpfx Aonh R Sujiwjab OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via Ledpfx Aeng Ax Sjiwjab - Service contracts, maintenance at your site

Condition: used, functionality: fully functional, Year of construction: 2016, Combined profile and tube bending machine Lajdpfxsy Ryfne Aiwjb Manufacturer: Italy For round tubes up to 48 mm 1st station for ring bending for large radii 2nd station for tube bending up to max. 180 degrees Electrically driven Motor: 1.1 kW, 400 V, 50 Hz, 3-phase With digital display With foot pedal With tooling for 42.4 mm tube, radius approx. 150 mm Weight approx. 350 kg

Condition: good (used), Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Bridgestone, J-Lug tire with inner tube -Tire size: 7.50-15 Lodpfoyx S Taox Aiwsab -Quantity: 1 tire available -Dimensions: Ø 775 x 185 mm -Weight: 37 kg

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW Laedpfx Aisxaal Rswsb weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The newly developed filtoo filter unit from TEKA is a mobile filtration system suitable for a wide range of applications involving the filtration of fumes, dust, and gases. It is also suitable for high-alloy steels (stainless steel). The unit has been tested according to DIN EN ISO 15012-1 (2005) and is IFA ( formerly BGIA) certified (IFA No. 201020469/1140) for welding fume class "W3" (separation efficiency: > 99.9%). Where can the SIG 230 filtoo be used? - at welding workstations - in workshops - for soldering applications - by restorers - in metalworking shops Features: - BGIA-certified extraction and filtration system . IFA 1005030 for extraction . from high-alloy steels Steels & Non-ferrous Metals - Operating instructions in German Optional equipment available at extra cost (recommended) - STAVO retrofit kit (dust pre-separation) - For FILTOO with spark guard and collection tray Note: - This unit is only used for extracting dry dust/fumes - Read the operating instructions before initial use

Condition: excellent (used), mileage: 204,000 km, power: 324 kW (440.52 HP), first registration: 03/2009, fuel type: diesel, axle configuration: 6x6, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: orange, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro4, suspension: steel, number of seats: 2, total length: 9,600 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, electric window regulation, power mirror, trailer coupling, = Additional Options and Accessories = - Leaf suspension - Power brake booster - Refrigerator - Radio/CD player - Rotating beacon - Reversing camera - Hose sets - Sun visor - Toolbox - Central lubrication - Towing hitch = Remarks = 6x6 Leaf suspension ZF 16-speed manual transmission RSP ESE 26/8-DV-K suction excavator 8 m³ 2 turbines 2x radio remote control Hydrostatic drive (suction + driving + steering) Inspection valid until 05.03.2027 Lsdpfx Aiey Dh Rfjwoab In very good condition! Dutch vehicle Immediately operational = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Transmission Transmission: ZF, 16-speed, manual Axle configuration Suspension: leaf suspension Max. front axle load: 9,000 kg Rear axle 1: Max. axle load: 9,500 kg Rear axle 2: Max. axle load: 9,500 kg Weights Unladen weight: 23,520 kg Payload: 4,480 kg Gross vehicle weight: 28,000 kg Functional Body make: RSP ESE 26/8-DV-K Maintenance, History and Condition APK (MOT/TUV): inspected until 03/2027 Technical condition: very good Visual condition: very good Identification License plate: BV-VF-88

Condition: used, Year of construction: 2020, operating hours: 6,493 h, machine/vehicle number: TB25A-008, overall weight: 650 kg, total length: 2,600 mm, total width: 1,000 mm, total height: 1,200 mm, power: 1.4 kW (1.90 HP), Tubobend 25 Machine Data Model: Tubobend 25 Operating hours: 6,493 h Weight: approx. 650 kg Dimensions: approx. 2600 × 1000 × 1200 mm Performance Data Connected load: 1.4 kW Bending Data Bending capacity (mild steel): Ø 25.0 × 3.0 mm Lajdpfx Asy H I R Rjiwob Max. bending radius: 75 mm Max. bending acceleration: 58 °/s Bending accuracy: ± 0.2°

Condition: excellent (used), Used Gecam - Euro Fintec 128 steel tube linisher / sander / polishing machine for sale Fintec 128 Tube finishing machine for sale Laodpfx Aiewbh Dyewjb Can be viewed under power with your steel tubes

Condition: used, machine/vehicle number: 20190539, Year of construction: 2019, Offer 26089 Technical Data: - Manual rotation by 180° (90° to the left and right) - Manual tilting by 90° - Load capacity with 4 suction cups at 80% operating vacuum: 0.32 t - Diameter per suction cup: 280 mm - Dimensions: 715 x 833 mm - Distance or installation height from underside of suction cup to crane hook: 950 mm - Installation depth in vertical position: 230 mm - Operated with independent 12 V battery - Battery charger: 220 V - Required space approx.: W 300 x H 300 x D 1600 mm - Own weight approx.: 60 kg Lsdpfx Aey Ib Husiwoab - Transport box: W 1800 x H 450 x D 400 mm

Condition: good (used), Year of construction: 2009, Offer 25291 Technical Data: - Lifting capacity with 6 suction plates: 600 kg - Suction plate dimensions: 400 x 250 mm - Vacuum motor power (battery-operated): 0.85 kW Ljdpfx Asy Ibn Eeiweab - Battery charger connection: 230 V - Distance from crane eye to suction plates in horizontal position: 950 mm - Required space (W x D): 1400 x 750 mm - Own weight approx.: 180 kg

Condition: used, Year of construction: 2007, The Romaco Unipac U2080 is a versatile, high-performance tube filling and sealing machine designed for pharmaceutical, cosmetic, and chemical products. Operating at a mechanical speed of 80 tubes per minute, it features 9 stations and handles tube diameters from 10–50 mm and lengths from 60–220 mm, offering flexible, precise filling. Key Features and Technical Specifications: Machine Type: Automatic tube filling and sealing machine. Capacity: Up to 80 tubes per minute (mechanical speed). Working Stations: 9. Ledpfxsyvuhnj Aiweab Tube Dimensions: Diameter: 10 – 50 mm. Length: 60 – 220 mm. Application: Suitable for liquids, creams, and gels for pharmaceutical and cosmetic applications, say Makinate and MLTC-Europe.