Used Sweeping Machine for sale (65,250)

Condition: excellent (used), Year of construction: 2021, 2021 KIMLA BFN 1007 Linear CNC Gantry Milling Machine Table: 1000 x 750 mm, Working travel: 1000/700/300 mm, Spindle rpm: 24000 rpm, Spindle power: 19 kW, Tool chuck: HSK63F, Tools magazine: 20 pieces, Control: CNC, S/No: 3626 (2021), Machine weight: 5600 kg, Note: ONLY 623 spindle hours. Note: Machine located in Wroclaw, Poland. Bljdpfxe Ahq Awo Abqsp

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH Bsdpfx Abez Eh Egeqolp

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Bjdpfx Abexxb Rroqolp Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 945 h, functionality: fully functional, machine/vehicle number: UHM3500A015C25764, power: 36.3 kW (49.35 HP), first registration: 09/2015, overall weight: 1,900 kg, fuel type: diesel, maximum load weight: 3,500 kg, empty load weight: 1,800 kg, next inspection (TÜV): 10/2028, fuel: diesel, driver cabin: other, gearing type: automatic, Equipment: air conditioning, car registration, Nilfisk City Ranger 3500 – only 940 operating hours – sweeping and vacuuming technology, winter service equipment, and high-pressure cleaner For sale is a fully functional Nilfisk City Ranger 3500, built in 2015, with only 940 operating hours. Thanks to its sweeping and vacuuming unit, winter service equipment, and integrated high-pressure cleaner, the machine can be used in a variety of ways throughout the year – ideal for municipalities, caretaker services, and the maintenance of commercial and industrial areas. Sweeping and vacuuming operation The front sweeping brushes direct dirt and debris to the suction nozzle. The material is then drawn in via the suction system and transported to the debris container. Water spraying supports dust control during sweeping. The machine is suitable for cleaning paved roads, paths, parking lots, and industrial areas, as well as for collecting leaves, sand, gravel, and general street litter. Quickly ready for winter service With a few modifications, the City Ranger can be converted from sweeping and vacuuming mode to winter service mode. The included sweeping roller enables the removal of loose snow on paved surfaces. The Fiedler roller spreader, also included, can be used to spread de-icing salt. This means the machine can handle both snow removal and spreading tasks. Integrated high-pressure cleaner A high-pressure cleaner is permanently installed in the machine. It can be used to clean the machine itself, for example, when dirt accumulates during sweeping, as well as for cleaning other objects and surfaces. New inspection, fresh oil change, and new tires In October 2026, the main inspection (HU/TÜV) and the oil change were carried out. At the same time, the tires were also replaced. Vehicle data and scope of delivery Year of manufacture: 2015 Operating hours: only 945 Condition: fully functional HU/TÜV: new, October 2026 Oil change: October 2026 Tires: replaced in October 2026 Sweeping and vacuuming unit including front sweeping brushes and debris container Sweeping roller for winter service Fiedler salt spreader Permanently installed high-pressure cleaner VAT can be shown separately Blodpfx Ajz S U Txobqjp The attachments shown in the photos are included in the offer and in the selling price. Inspection and functional demonstration possible by arrangement.

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Bjdpez Iz Imofx Abqjlp Condition: used Machine type: CNC Router If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Bjdpfox D Tbmjx Abqjlp Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. Blodpfx Ajydvzdsbqep can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: like new (used), Almost new sweeping machine, used for only up to 50 hours. Bjdpszzrcqsfx Abqelp

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Bodpfey Ni Ivox Abqslp Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Bodpfx Ajz St Hwebqolp Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Bodozrnkrspfx Abqslp Weight: 4100 Kgs

Condition: used, Year of construction: 2008, operating hours: 4,400 h, Fully functional, in very good condition. Bljdpfez Abmuox Abqjp

Condition: used, machine/vehicle number: 1187333, sweeping width:60 cm Capacity:1800 Watt Bljdpfscxxtzox Abqep dimensions of the machine ca.:0,60 x 1,20 x 0,95 m

Condition: used, machine/vehicle number: 465550442, sweeping width:66 cm Bjdpfxjcxxv Do Abqelp total power requirement:1,49 kW weight of the machine ca.:600 kg dimensions of the machine ca.:0,72 x 1,55 x 1,15 m

Condition: excellent (used), Year of construction: 2023, 400mm swing, Blodpoz Srv Defx Abqjp 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, Bsdpfsz R Rbdsx Abqjlp 24 station ATC.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 2019 automatic inline monoblock filling and capping machine for 5 litre bottles, with 8 filling heads. Supplied with infeed and outfeed conveyors. Listed as Canellitech Srl 8-1. The manual identifies the manufacturer as Rizzolio Equipments S.r.l., model RLV 8-1. Technical specification: ✅ Manufacturer - Rizzolio Equipments S.r.l. (listed as Canellitech Srl). ✅ Model - RLV 8-1 (8 x filling heads). ✅ Year of manufacture - 2019. ✅ Set up for - 5 litre rectangular PET bottles with push caps. ✅ Fitted with 32mm diameter vent tubes and filling nozzles. ✅ Capping - push capping head. ✅ Speed - up to 500 bottles per hour nominal. The manual states actual output depends on the operator. ✅ Electrical - 380V / 50Hz / 3 phase + neutral, 24V controls, electro-pneumatic. Bedoulpu Sspfx Abqslp ✅ Power - 1.0 kW max absorption, 2 kW installed. ✅ Weight - 400 kg. ✅ Dimensions - 2.7m L x 1.1m W x 2.45m H. Condition: , lightly used. Documents: EU Declaration of Conformity (Machinery Directive 2006/42/EC) included in the manual.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Machine With: 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Bljdpfxjzux Iye Abqjp Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Bedpfx Abozi Awhsqslp Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, overall weight: 1,100 kg, REF: MM6469 Complete tube filling and sealing system, comprising of the following equipment: 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Bledpfozp E Sbex Abqep Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Electrical requirements - 3 phase. Maximum air pressure - 8 Bar. Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Weight of of AXO 1000 MATIC tube filling system - 1100 kg.

Condition: used, Year of construction: 1998, machine/vehicle number: 014569, sweeping width:68 cm Blodpscxxutsfx Abqep Capacity:1800 Watt weight of the machine ca.:0,23 t dimensions of the machine ca.:55 x 130 x 110 cm

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Bedpfez Eh Nlox Abqslp Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor.

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Bjdpezkbirsfx Abqelp Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), first registration: 06/2017, fuel type: diesel, color: other, fuel: diesel, Beautiful Original NL Mathieu MC210 Sweeper, directly from a Dutch municipality = More information = Year of construction: 2017 Technical condition: very good Visual appearance: very good Damages: none Registration number: T-68-DHG = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Bledozuc Hyopfx Abqop Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: excellent (used), Year of construction: 2022, 400mm swing, 220mm max diameter, 510mm cutting length, Siemens 828 Control, 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Spindle Speed 4000rpm, Blodpfxez Hatfo Abqep 3 jaw chuck, low volt light, coolant, Tool setter, swarf conveyor