Used T Slot Table for sale (79,014)

Condition: good (used), Year of construction: 2015, machine/vehicle number: 15-0577, Offer 26279 Clamping, aligning, and welding table with T-slots and cast iron rails Dwedo Ah Ri Dopfx Aized Technical data: - Length 3000 mm - Width 1500 mm - Table height 835 mm - Max. point load (with adjustable feet) 1500 kg - Grid engraving 100 x 100 mm - Axle spacing 100 mm - Weight approx. 600 kg

Condition: used, T-slot assembly table, T-slot table, T-slot welding table, Used machine Overall dimensions: Length: 1000 mm Width: 800 mm Height: 630 mm Weight: 854 kg Dwodpfo Ah D H Usx Aizsd T-slot size: 50 x 20 mm Table size: Upper part: 1000 x 800 mm Side part: 930 x 400 mm Worktable tiltable at 90˚

Condition: good (used), Used Bode - T-slot clamping table Dsdjxqpctspfx Aizjwd Length x Width x Height = 4000 x 1500 x 200 mm

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm Dwedpfjxy Styox Aizsd T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: excellent (used), Year of construction: 1998, TYPE BRIDGE FRAME HYDRAULIC CAPACITY 20 TONS CONTROL FANUC SERIES 18P TURRET 31 STATION THICK TYPE 3 AUTO-INDEX STATIONS 19 X A 6 X B 1 X C 2 X D AUTO INDEX STATIONS 2 X B 1 X C MAX TRAVERSE (WORKING AREA) 1270 X 1270 MAX SHEET SIZE ( WITH ONE REPOSITION) 1270 X 2540 MAX SIMULTANEOUS SPEED 82 METRES PER MINUTE MAX SHEET WEIGHT 75KG MAX SHEET THICKNESS 3.2MS MAX HIT RATE 1000 HITS PER MINUTE TABLE BRUSH TYPE WEIGHT 9.8 TONS COMPLETE WITH CHILLER NC SPECIFICATION Model of NC ... FANUC 18-P Axis ... 3 axis simultaneous Tape Code ... EIA or ISO (Automatic recognition) Programming Mode ... Absolute / incremental Min. Input ... 0.01 mm (0.010) Dwedpo Affmnjfx Aizsd Max. Input ... 99999.99 mm Preparatory Function ... G - 2 digit T Function ... T - 3 digit M Function ... M - 3 digit Single Block ... Yes Block Delete ... Yes Optional Stop ... Yes Editing ... Yes Manual Data Input ... Yes Memory Capacity ... 64 Kb Max. No. Of Programs ... 191 Display ... 9" Colour LCD Machine Operation ... Memory or tape Punch Interface ... RS 232 C

Condition: good (used), Length: approx. 2430 mm Width: approx. 1520 mm Dodpfx Aisd Nmdfszowd Height: approx. 540 mm

Condition: good (used), machine/vehicle number: xxxx; Lg-Nr. 17268, Technical specifications: - Plate surface in good condition - Length approx. 2000 mm - Width approx. 1000 mm - Height approx. 1600 mm - Top plate thickness approx. 95 mm Dwjdpfx Aisdd Dmxezsd - Top plate with internal ribbing - 4 T-slots on the table surface, length 2000 mm - Distance between T-slots on the table surface, 230 mm each - Table side surface, L 2000 mm, with 12 threaded holes M27 - T-slot width approx. 40 / 67 mm - T-slot depth approx. 35 / 60 mm - Space required L 2200 x W 1200 x H 1600 mm - Weight approx. 4980 kg

Condition: good (used), machine/vehicle number: 21494, OFFER 21494 Technical data: - Clamping area approx. L 900 x W 600 mm - Table height 480 mm - Circumferential water channel - 3 T-slots M 16, L 900 mm - Side mounting plate - Space required: L 1000 x W 760 x H 480 mm - Weight approx. 300 kg Dwedpohii R Djfx Aizsd

Condition: used, T-Slot Table, Assembly Table, Work Table, Straightening Table, Used Machine Overall dimensions: Width: 2690 mm Depth: 660 mm Height: 165 mm Weight: 1415 kg Djdpfxjy Udfas Aizowd

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of steel cast gray iron Table unit with clamping plate and very robust guide rail Table clamping surface: 5500 x 2000 mm Travel of the table clamping plate: approx. 3100 mm Table height / overall height: 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single start) - Machining table guided very stably on the bed - Metal telescopic guide rail cover - from a DROOP & REIN portal milling machine - Table longitudinal movement via ball screw and SIEMENS servo motor Dsdpfsthuzpox Aizewd - Clamping surface with 11 T-slots, 28 mm - Drive via SIEMENS servo motor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Overall length: 9500 mm Width: 2000 mm Overall height: 1050 mm Weight: 27 tons Good condition

Condition: used, 2 clamping plates, 1 pair of clamping rails with T-slots Clamping block, press table, auxiliary table with T-slots Length per clamping rail: 900 mm Width per clamping rail: 295 mm Dwodpfx Aiexf Uwlozsd Thickness per clamping rail: 130 mm - 6x T-slots, 30 mm - T-slot spacing: 150 mm - 6 holes Ø 18 mm (spacing 300 x 160 mm) - All sides machined surfaces Net weight per clamping rail: 240 kg Net weight of both clamping rails: 480 kg Good condition

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Dwedpfx Asynnlijizjd Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high.

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Dsdpfx Aisz Snrnozowd Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: ready for operation (used), Year of construction: 1965, operating hours: 5,128 h, functionality: fully functional, machine/vehicle number: 01123, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table length: 1,000 mm, table width: 800 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 1, 2026, and December 10, 2026! TECHNICAL DETAILS Speed range: 12.5–1,000 rpm Table dimensions: 1,000 × 800 mm Number of T-slots: 7 Travel range X-axis: approx. 600 mm Travel range Y-axis: approx. 500 mm Travel range Z-axis: approx. 600 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 14 A Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,000 x 2,300 mm Machine weight: 6,000 kg Operating hours (read): 5,128 h EQUIPMENT Tool holders WALTER dividing head Four-jaw chuck, diameter 200 mm Dsdps Ahn Arefx Aizjwd Various clamping devices External reference: Frankenthal - Lot 391

Condition: excellent (used), Year of construction: 2002, operating hours: 18,419 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, table load: 350 kg, number of axes: 5, TECHNICAL DETAILS X-axis travel: 630 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Table length: 1,000 mm Table width: 600 mm Rotary table diameter: 600 mm Table weight: 800 kg Table load capacity: max. 350 kg Number of T-slots: 8 / 1 Dwjdps Afw Auefx Aizod T-slot width: 14 H12 / 14 H7 mm T-slot spacing: 63 mm C-axis swivel range: 360° Tool interface: SK 40 Tool positions: 24 MACHINE DETAILS Control system manufacturer: Heidenhain Spindle operating hours: 18,419 h Total operating hours: 50,446 h EQUIPMENT 5-axis machining (3+2) NC-controlled swivel milling head (B-axis) NC rotary table (C-axis), integrated into the fixed machine table 24-position tool changer

Condition: used, Rotating Boring Table Travel X: 2000 mm Table size: Length 1240 mm x Width 1250 mm Bench width: 1030 mm Diameter of the ball screw: Ø 70 mm 2 motors INDRAMAT: 1 travel X motor + 1 table rotation motor Supplied without electrical panel (electrical cabinet to be redone) Protector hennig in average condition Ideal part for retrofitting Total bench length: 5200 mm Dwodpfez Nxmksx Aizod Width: 1900 mm Height: 900 mm Weight: approx 7 T

Condition: good (used), Offer 25435 Technical Data: - Plate length approx. 3500 mm - Plate width approx. 1750 mm - Plate height approx. 350 mm - Rectangular tubes bolted on left and right, each 200 mm - Top plate thickness approx. 80 mm - 6 T-slots in the table surface, length 3500 mm - Center distance of T-slots on the table surface: 250 mm each - Center distance of T-slots from outer edge: 125 mm - T-slot width approx. 35 / 60 mm - T-slot depth approx. 60 mm - Space requirement: L 3500 x W 2100 x H 350 mm - Weight approx. 4200 kg Dwjdpfxjx Dmfro Aizod

Condition: good (used), Offer 25348 Technical Specifications: - Plate length approx. 5500 mm - Plate width approx. 2000 mm - Plate height approx. 350 mm - Thickness of top plate approx. 80 mm - 8 pcs. T-slots in table surface, length 5500 mm - Center distance between T-slots in table surface: 255 mm each - Center distance of T-slots from outer edge: 110 mm - T-slot width approx. 40 / 60 mm - T-slot depth approx. 62 mm Dwodsxu Evwepfx Aizod - Required space: L 5600 x W 2020 x H 350 mm - Weight approx. 10,200 kg

Condition: excellent (used), Floor plates 6000x2000x400mm, with T-slots. 8 pieces available. Dwsdpfxof H Hgfe Aizsd Weight: 11.5 tons/piece.

Condition: good (used), machine/vehicle number: 26041, Offer 26041 Technical data (approx.): - Plate length approx.: 3000 mm - Plate width approx.: 2500 mm - Plate height without base frame approx.: 180 mm Dodpfx Asyvrx Rsizewd - Plate height with base frame approx.: 810 mm - Top plate thickness approx.: 115 mm - 11 T-slots in the table surface, length: 1500 mm - T-slot pitch in the table surface: 250 mm each - T-slot width approx.: 40 / 22 mm - T-slot depth approx.: 16 / 24 mm - Required space: L 3500 x W 2500 x H 1100 mm - Weight approx.: 4500 kg

Condition: good (used), Clamping plate with T-slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: Mounting plate with T-slots -Clamping surface: 1295 x 2000 mm -Sheet height: 90 mm Solid, planed underside Dwsdpfx Asyn Rc Reized -Groove width: 27 mm -Dimensions: see drawing in the photos -Overall dimensions: 1295/2000/H90 mm -Weight: 1587 kg

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from: a WOTAN drilling machine -compatible with: Linear actuator ID 22786 -Travel: 1110 mm -Clamping plate: 1000 x 1260 mm (rotatable) -Plate is: Solid Dedpfx Aisd E Hk Hszewd -Groove width: 21 mm -Dimensions: 2470/1070/H885 mm -Weight: 2200 kg

Condition: good (used), Offer 26037 Technical data (approx.): - Plate length approx.: 6000 mm - Plate width approx.: 1800 mm - Plate height without subframe approx.: 360 mm - Plate height with subframe approx.: 870 mm - Top plate thickness approx.: 75 mm - 6 pcs T-slots in the table surface, length: 6000 mm - Center distance of T-slots in table surface: 250 mm - Center distance of T-slots from outer edge: 125 mm Dodpfx Asycr Spsizjwd - T-slot width approx.: mm - T-slot depth approx.: mm - Required floor space: L 6000 x W 1850 x H 870 mm - Weight approx.: 11000 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500x390 mm, height 630 mm -Wall thickness: 65 mm -T slots: slot width 22 mm -Dimensions: see photos / technical drawing -Dimensions: 500/390/H630 mm -Weight: 171 kg Dwsdpfx Aioxugvlezed

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate Dwsdpfx Aoliugmsized -Welding table: clamping plate with T-slots on a solid base frame with vice -Bottom: with cooling fins -Table surface: 2010 x 650 mm -Groove width: 19 mm -Groove spacing: 130 mm -Overall dimensions: 3170/860/H1060 mm -Weight: 880 kg