Used Table Saw for sale (41,899)

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Cedpfx Aorubg Hjflohf

Condition: new, Year of construction: 2025, Cut-size circular saw with tiltable saw blade and high-quality sliding table made of anodized aluminum Cutting plane of the small-format circular saw directly on the roller table Precision-guided sliding carriage made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable The standard table widening and table extension allow easy working with larger workpieces. The large dimensioned sawing unit made of grey cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground grey cast iron, therefore extremely robust and insensitive smooth running and precise cuts Aluminium sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Chjdpfocnxamex Aflsf Telescopic stop Extendable aluminium telescopic stop Angle adjustable With two professional folding fences Rip fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table extension Anodized aluminium sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data table dimensions 1020 x 325 mm table height 900 mm working length 1660 mm Cutting height max. 90° with scoring 100

Condition: good (used), Year of construction: 2008, Table Circular Saw METABO Model: THKS 315 C / 2.80 DNB Year of manufacture: 2008 3-phase 400 Volt 50 Hz Chedpfx Asxvquujflef Power: 2.8 kW Blade bore: 30 mm Saw blade diameter: 315 mm Mitre fence Mitre adjustment 45-90° Max. cutting height 90/45° Max. cutting width at parallel fence Carbide-tipped saw blade with alternate teeth Saw blade guard Table extension

Condition: used, Year of construction: 1998, 1 piece cross-cut saw KALTENBACH TL350 as per images and inspection Colour: green Year of manufacture: 1998 Condition: used Payment method: advance payment by bank transfer Storage location: production hall Shipping: Collection only – Shipping is not offered for this item! Chodpfx Aex A Aqusflsf

Condition: new, Year of construction: 2025, cutting width (max.): 280 mm, cutting height (max.): 48 mm, saw blade diameter: 168 mm, cutting width at rip fence: 280 mm, Festool Cordless Table Saw CSC SYS 50 EBI-Set 36 Volt battery voltage, No-load speed 4,500 - 6,800 rpm, tiltable from -10° to +47°, cutting height 0 - 48 mm (at 45° = 34 mm), electric height and tilting adjustment with digital display maximum rip capacity 280 mm, sliding table with cross-cutting width up to 450 mm, miter angle stop 0 - 70°, complete with: saw blade 168 x 1.8 x 20 mm, Z = 42 tooth WD, Cjdpfx Afsxzudqolehf parallel guide, push stick, angle stop, dust collection bag, riving knife for concealed cuts, riving knife with blade guard, 6 mm hex key, energy set SYS 18 V 2 x 5.5/TCL 6 DUO, stand UG-CSC-SYS Order No.: 577379 available ex stock Seevetal, promotion valid until the end of 2025, while stocks last, without shipping and packaging

Condition: new, CATALOGUE NUMBER RE022 – new machine, in stock – DTR + CE documentation – cutting width at the guide 1300mm – main engine 6kW TECHNICAL DATA - saw blade tilt 0-46˚ - main engine power 6kW - cutting length on the carriage 3000mm - main spindle speed 3500/4500rpm - spindle diameter 30mm - main blade diameter 300-400mm Chjdpfxed Sg Hxs Aflof - max. scoring diameter 125mm - scoring engine power 0.75kW - scoring speed 8500rpm - spindle diameter 20mm - cutting width at the guide (standard 1050mm, option 1300mm) 1300mm - sawing width using bumpers on the auxiliary table 215-3200mm - cutting height for 300mm 90°/45° 90/60mm - cutting height for 350mm 90°/45° 5-115 / 3.5-80mm - cutting height for 400mm 90°/45° 25-140 / 15.5-95mm - diameter of the exhaust port 80mm, 125mm - dimensions length/width/height 3300/3460/1500mm - weight 750kg Optional equipment: - angle ruler - with aluminum strip - additional support table - additional start/stop in the formatting table - electronic cutting width reader on the longitudinal ruler - electronic cutting width reader on the auxiliary table - formatting table 3200mm, 3900mm, 2500mm Net price: PLN 41,550 Net price: EUR 9,890 Net price calculated according to the exchange rate of PLN 4.20/EUR (with larger exchange rate fluctuations, the price may change) The prices given are net prices. Net price given for international transactions, customers from the EU with an EU tax identification number.

Condition: excellent (used), Saw blade length 3450 - 3640 mm Cutting height max. 325 mm Chodpfxexx I H Te Afljf Projection/cutting width 405 mm Table size 615 x 615 mm With Ideal BS0/16 saw blade welding device with blade shears and grinding stone Angle-adjustable machine table Cutting speed 16 - 2200 m/min Very well maintained condition

Condition: excellent (used), Year of construction: 2022, Casadei Panel Saw Xenia 40, Year 2022 Robust steel and cast-iron construction ensures precision, smooth running, and durability Smooth-operating, precise sliding table made of anodized aluminum with a proven and long-lasting ball-contact system on hardened guides – 10-year warranty on wear of the carbide guide rails Six-year HOLZKRAFT warranty on wear of the tilting segments of the saw unit Cast-iron saw table Large support surfaces thanks to standard table extension and table widening Fold-down rip fence, manually adjustable with fine adjustment Angle-adjustable crosscut fence, extendable up to 3200 mm, with two flip stops Outrigger with material support roller TECHNICAL DATA Dimensions and Weights Weight (net) approx. 661 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter (saw blade guard): 80 mm Setup Information Transport width: 1,150 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.9 kW Output power (motor): 7.0 kW Duty cycle drive motor: S6 Duty cycle duration drive motor: 40% Sliding Table and Table Crosscut frame length: 3,200 mm Saw Unit Cutting width with rip fence: 1,270 mm Max. crosscut width to the left of the saw blade: 3,200 mm Saw blade tilt: 90 - 45° Max. cutting height at 90°: 140 mm Max. cutting height at 45°: 99 mm Saw blade diameter: 400 mm Saw blade speed: 3,700 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 8,500 rpm Csdpfxoxac R Ae Afljhf FEATURES Equipment Scoring unit Anodised aluminum sliding table Handle for sliding table Material roller on crosscut frame Saw rip fence with round bar guide Stops: professional flip stops Table widening Table extension Saw blade pendulum guard Location: ex stock 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 2018, 5.5 kW main motor, frequency converter (2000-6000 rpm), motorized 2-axis scoring unit with its own drive. Motorized height adjustment in 0.1 mm increments. Motorized angle adjustment in 0.1° increments with digital display. 1090 x 630 mm miter gauge. Narrow and wide extraction hoods with quick-change function. Clamping shoe, sliding block, and manual quick-release clamp. Sliding carriage length 2150 mm (cutting length 2170 mm) - Quick-Scoring equipment packages - Scoring unit adjustable without tools from 2.8 to 3.6 mm - Miter gauge +45° - 45° - On/off switch on the sliding carriage. Storage location: Nattheim Cjdpjvvkm Uefx Aflehf

Condition: excellent (used), Welding table for band saw blades Csdped Aruxefx Aflshf up to 400mm width

Condition: good (used), Code: 0247 Brand: SCM Model: L'INVINCIBILE SI 6000 - CE Standard Automatic panel saw with TOUCH SCREEN VANGUARD electronic control and tilting blade with scoring unit for precise cutting of panels, furniture, custom-made furnishings, kitchens, window frames, doors, plastics, composite materials, and various - CE Standard Sturdy structure to ensure maximum working precision Cast iron worktop with extension top Patented SCM sliding carriage in extruded aluminum with large section, rigid and with closed lattice structure for maximum resistance even with heavy loads Parallel guide with precision at 25 m/min Automatic adjustment of scoring unit 2 digital displays on the square guide VANGUARD TOUCH SCREEN control - Manual, semi-automatic, and automatic modes - Operator assistance system - 12-inch color video and Touch Screen function Full Support frame tiltable from + 50° to - 50° for angled cuts with panels of any size Overhead control panel Start/stop buttons integrated into the carriage Technical data: Carriage length 3200 mm Extendable fence for square cuts up to 3200 mm Cutting width with parallel fence 1500 mm Blade diameter 400 mm F30 Scoring blade diameter 120 mm F20 Max cutting height at 90° 130 mm Max cutting height at 45° 92 mm Blade motor power 7,5 Hp Scoring blade motor power 0,75 hp Suction port diameter mm 120/100 Overall dimensions of assembled machine mm 3400 x 4300 x 1720 h Chjdpjxz Ekbefx Afljf Overall dimensions for transport mm 3400 x 2350 x 1720 h Weight kg 1380

Condition: excellent (used), Catalogue number: 7791 TECHNICAL SPECIFICATIONS - max diameter of main blade with scorer: 350mm - max cutting height: 105mm - main blade adjustable up/down + tilt - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on the sliding table: 1430mm - cutting width at rip fence: 1000mm - with side table - with scorer - max scorer diameter: 80mm - scorer spindle diameter: 20mm - main motor: 5.5kW - extraction port diameter: 100mm - table dimension: 115x625mm Cedpfx Afjxpvk Isljhf - table size with extension and widening: 2150x1105mm - blade guard - 3 blade speeds: 3200/4500/6000rpm - dimensions (L/W/H): 2300x3350x1520mm - weight: 746kg Net price: 11,900 PLN Net price: 2,830 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Robland NZ3800 format saw with a trolley Scorer on a separate engine, 380cm trolley length 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable culaga on the right side motorically adjustable, i.e. we enter the dimension and it is set, max 1520mm 5.5KW main engine Chedevyixwopfx Afljf 3 cutting speeds A branded machine, technically fully functional, will still fulfill its functions well

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cedpfxjv Erkas Aflshf Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: used, functionality: unexamined, Fimal P350NX Sliding Table Panel Saw Chjdpfsw Tm Awex Aflof

Condition: new, Year of construction: 2025, functionality: fully functional, 11 kW = 15 HP Cutting height: 200 mm Codpfx Ajcyd Nceflshf Saw blade diameter: 550 mm with raker teeth Cutting width to parallel fence: 1500 mm Sliding table length: 3200 mm Sliding table mounted on hardened steel rollers (similar to Altendorf) The large crosscut fence on the sliding table can be swiveled 45° left and right Electric height adjustment Electric tilting adjustment up to 45° Digital inclination display Machine weight: 1250 kg

Condition: like new (used), Year of construction: 2025, For sale: Hammer K2M3 table saw with an 800 mm cutting length. The machine has a minor transport damage and is in like-new condition. Cedpsxxr N Eofx Aflehf Technical specifications: - Cutting length: 800 mm - Cutting width: 600 mm - Cutting height: 80 mm - Height adjustable and tiltable - Extractable (Ø 100 mm) - Motor power: 1.9 kW - Year of manufacture: 2025 - Minor transport damage The circular saw is located at A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, Hammer Reference: R-A0117

Condition: excellent (used), CATALOG NUMBER 7394 TECHNICAL DATA - max main blade diameter: 380mm - max cutting height: 110mm Chedpfsurkgpox Afljf - main blade height adjustable up/down - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on sliding table: 2560mm - cutting width at rip fence: 810mm - with side table - main motor: 5.5kW - table dimensions: 1250x730mm - blade guard included - overall dimensions (L/W/H): 2580x2570x1050mm - weight: 780kg ADVANTAGES – German-made – Used saw, very good condition Net price: 7900 PLN Net price: 1880 EUR (based on 4.2 EUR rate) (Prices may change with significant currency fluctuations)

Condition: good (used), Year of construction: 1997, Under-table cross-cut saw Codpoxtwk Dofx Afljhf max. cutting width: 800 mm max. cutting height: approx. 150 mm saw blade: 550 mm with 2 roller conveyors, the right one with stop and measuring scale

Condition: used, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideal for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine no.: 3229 — Technical specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on a pallet via freight forwarder possible at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and error. Cedpsxiza Uefx Aflshf

Condition: good (used), Year of construction: 2011, Saws sliding table saw WALTER FWR 500/2 - Polish production - DTR, CE - year of production 2011 TECHNICAL PARAMETERS: Cedpfx Afjh Dwmlelshf - the minimum length of the material after formatting is 800 mm - the maximum length of the material after formatting 1600 mm - maximum material width 480 mm - maximum material thickness 145 mm - disc diameter 500 mm - feed smoothly adjustable 0-20 m / min - main engine power 2 x 5.2 kW - 1.5 kW feed motor power Machine dimensions: 340x230x180 weight 2500 kg

Condition: excellent (used), CATALOG NUMBER 7644 Technical Data: - Max main blade diameter with scoring unit: 350 mm - Max main blade diameter without scoring unit: 450 mm - Cutting height with mounted blade: 100 mm - Main blade adjustable hydraulically: up/down + angle - Electric angle display - Electric height and lateral adjustment of scoring unit - Spindle diameter: 30 mm - Spindle locking - With sliding table - Cutting length on sliding table: 2800 mm - Cutting width at fence: 1440 mm - With side carriage - With scoring unit - Max diameter of scoring blade: 120 mm - Scoring unit spindle diameter: 22 mm - Scoring unit motor: 0.75 kW - Main motor: 5.5 kW - 4 spindle rotation speeds - Electronic speed display - Extraction port diameters: 120 mm, 80 mm - Table dimensions: 1220 x 730 mm - Table dimensions with extension: 1230 mm - Table dimensions with extension: 2070 mm - Saw blade guard - Dimensions (L/W/H): 2940 x 3400 x 1420 mm - Weight: 1100 kg ADVANTAGES – German-made – With scoring unit – Not repainted – Used saw, in very good condition Net price: 29,900 PLN Net price: 7,120 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR Chjdpewgdh Sjfx Aflef (In case of significant exchange rate changes, the price may change)

Condition: new, Catalog number: H0561 – new machine, in stock – CE certificate – Austrian production – professional – trolley on steel bars TECHNICAL DATA engine power S1 5500W (/750) voltage 400V / 50Hz table height 890mm extraction connector 100mm sliding table 3200x435mm extension table 1200x550mm max. cutting width with gauge 1300mm disc diameter 250-400mm (30) scoring blade diameter 120 x 20 x 3.2-4.2/2.2 mm rotational speed I: 3000; II: 4000; III: 5000 rpm Rotation speed of the scoring saw 8000 rpm Motor power of the scoring saw 750 W Blade tilt 0-45 ° Chsdpfx Ajvwlfbsflef Acoustic power level 90 dB (A) Acoustic pressure level 88.2 dB (A) Overall dimensions of the machine when unfolded L / W / H 3350 x 3600 x 900 mm Shipping dimensions 1350 x 2200 x 1170 mm Net/gross weight 930 / 1110 kg Features: - solid construction - with a large aluminum sliding table and boom, ideal for machining large elements and cutting large, heavy boards to size - cast iron work table (1100 x 700 mm) with table extension (900 x 830 mm) and table extension (610 x 600 mm) with solid steel construction – extension table (1200 x 550 mm) + cutting fence (1950 – 3300 mm) – scoring saw with separate motor – manually adjustable main saw blade angle 0°-45° (using angle indicator) – electric height adjustment of main saw blade and scoring saw Scope of delivery: LEUCO TCT main blade (Ø300 x 30 x 3.2 mm T72) LEUCO scoring saw blade (Ø120 x 20 x 3-3.8 T=2*12ES) Pressure beam – option Net price: PLN 24,300 Net price: EUR 5,750 depending on price EUR 4.20 (Prices may vary with higher fluctuations)

Condition: new, CATALOG NUMBER RE036 2 axes – electrically controlled lifting and tilting of the main saw blade with electronic height and angle readout, control panel integrated into the machine body – Brand new machine, in stock – Documentation: DTR + CE – Cutting width at the rip fence: 1300 mm – Main motor power: 6 kW TECHNICAL SPECIFICATIONS - Saw blade tilting range: 0–46˚ - Main motor power: 6 kW - Cutting length on sliding table: 3000 mm - Main spindle speed: 3500/4500 rpm - Main spindle diameter: 30 mm - Main blade diameter: 300–400 mm - Max scoring blade diameter: 125 mm - Scoring motor power: 0.75 kW - Scoring unit speed: 8500 rpm - Scoring spindle diameter: 20 mm - Cutting width at rip fence (standard 1050 mm): 1300 mm - Cutting width using stops on auxiliary table: 215–3200 mm - Cutting height for 300 mm blade at 90°/45°: 90/60 mm - Cutting height for 350 mm blade at 90°/45°: 5–115 / 3.5–80 mm - Cutting height for 400 mm blade at 90°/45°: 25–140 / 15.5–95 mm - Extraction port diameter: 80 mm, 125 mm - Dimensions (L/W/H): 3300/3460/1500 mm - Weight: 750 kg Optional equipment: – Angle guide with aluminum rail – Additional support table – Additional start/stop button on sliding table – Electronic digital cutting width readout on longitudinal fence – Electronic digital cutting width readout on auxiliary table Chsdpsvvif Nofx Aflsf Net price: 49,900 PLN Net price: 11,880 EUR (depending on the exchange rate, here calculated at 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7789 TECHNICAL DATA - Maximum diameter of main blade without scoring unit: 400mm - Maximum diameter of blade with scoring unit: 350mm - Maximum cutting height for 400mm blade: 110mm - Main blade adjustable up/down and angled - Large blade guard - Spindle diameter: 30mm - Brake - With sliding table - Cutting length on sliding table: 3000mm - Cutting width at rip fence: 1420mm - With side table - Fence on side table adjustable at an angle - With scoring unit - Maximum diameter of scoring blade: 120mm - Spindle diameter for scorer: 20mm Chedpjxpvmpofx Afljf - Scoring unit motor: 0.75kW - Main motor: 5.5kW - 3 rotation speeds - Table dimensions: 1330x800mm; with extensions/enlargement: 2200x1500mm - Extraction outlet diameter: 100, 135mm - Machine dimensions (L/W/H): 3120x3560x1480mm - Weight: 1050kg Net price: 12,900 PLN Net price: 3,070 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant currency fluctuations)