Used Tb Sprint 303 for sale (8,988)

Condition: good (used), Year of construction: 2016, lifting height: 20,350 mm, General information Mileage: 126.116 km Weights Empty weight: 3.260 kg Functional Lifting capacity: 200 kg Working height: 2.235 cm Working width: 352 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1418 m Max swing of arm in degrees: 225 Transport dimensions (LxWxH): 6,47x2,12x3 Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TB 220.2 Year of build: 2016 Condition: Used Data: Max. working height: 22,35 m Max. platform height: 20,35 m Max. reach: 14,18 m Total dimensions LxWxH: 6,47 x 2,12 x 3,00 m Platform dimensions LxW: 1,37 x 0,66 m Max. basket load: 200 kg Swivel range: 225° Ground pressure: 27 kN (vorne) / 16 kN (hinten) Ground clearance: 0,16 m Support width vertical: 2,12 m (vorne) / 2,12 m (hinten) Support width one side: 2,82 m (vorne) / 2,73 m (hinten) Support width both sides: 3,52 m (vorne) / 3,34 m (hinten) Support length: 4,15 m breit/ 3,19 m schmal Own weight: 3.260 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket 2x55°, maximum setup tilt 5°, loading area with tailgate 1.05 x 2.13 m. Information: Tüv and UVV new Dodoxrtbpopfx Adaecp Location: 41468 Neuss: immediately available

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Dcsdpfx Aeur Hfzedasp Fanuc 310is controller

Condition: excellent (used), fuel type: diesel, color: grey, Year of construction: 2019, operating hours: 3,317 h, Technical information Track width: 23 cm Drive: Track Make of engine: Yanmar Empty weight: 1.865 kg Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Dsdpfx Asxqpwwjdascp Transport dimensions (LxWxH): 3,6x0,98x2,34 Production country: JP Additional information Please contact Vink Machinery for more information Takeuchi TB 216 * 2019 * 3317 working hours * Diesel drive * Hydraulic quick coupler * Additional function on the mast * Includes 23 cm bucket and 100 cm dozer blade * 1865 kg net weight

Year of construction: 2012, condition: ready for operation (used), This MILLUTENSIL Mil 303 hydraulic press was manufactured in 2012. It features a usable table of 3000 mm by 2000 mm, with a maximum load capacity of 30,000 kg on the upper table and 70,000 kg on the lower table. The press operates with a total power of 31.1 kW and offers adjustable hydraulic pressure up to 240 bar. Consider the opportunity to buy this MILLUTENSIL Mil 303 hydraulic press. Contact us for more information. Dcjdpfx Asxuav Eodaep Application Types Bending

Condition: used, Year of construction: 2020, operating hours: 425 h, Technical Specifications ID: 11254536 Manufacturer: Iveco Model: Daily Version: 35S14 First Registration: 09-2020 Power: 100 kW (136 HP) Displacement: 2287 cm³ Fuel Type: Diesel Color: White Number of Axles: 2 Wheelbase: 3,750 mm Tyres: 225/65R16C Transmission: Manual Emission Class: EURO 6 Length: 6.77 m Gross Vehicle Weight: 3,500 kg Unladen Weight: 3,040 kg Payload: 460 kg Mileage: 97,224 km Features - Cruise control - Air conditioning - Rear-view camera - Anti-lock Braking System (ABS) - Traction Control (ASR) - Electrically adjustable and heated exterior mirrors - Brake Assist - 6-speed manual gearbox - Immobilizer - Central locking with remote control - Mobile topometer - On-board computer - Android car radio with GPS, Bluetooth, WiFi, Apple CarPlay Superstructure Time Versalift LT 36-130 TB Aerial Work Platform - Working height: 12.2 m - Lateral outreach: 7.1 m - 4 hydraulic outriggers - Basket for 2 persons or max. 200 kg - Remote control for ground operation - Engine start/stop function - Electric emergency pump - Tool box - 425 operating hours - 230V socket in the basket - Wind speed meter Dcsdexuilvopfx Adaop - Warning beacons The Time Versalift LT 36-130 TB aerial work platform mounted on an Iveco Daily 35S14 is a reliable and versatile solution for working at height. Thanks to its compact design, stable platform with four outriggers, and generous outreach, this vehicle is ideally suited for a wide range of applications. Perfect for electrical and lighting companies, municipal and maintenance services, building cleaning, tree care, telecommunications, advertising technology, and many other sectors where safe and efficient work at height is required. All functions of the platform are fully operational and have been inspected by our workshop. The vehicle is ready for registration. German documents, TÜV inspection, and UVV certification are included free of charge. Additional equipment such as tow bar, lighting, shelving, and more can be provided on request. The vehicle is available immediately in Langenfeld.

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Dedexnmxmopfx Adaocp Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), functionality: fully functional, Control unit, top 1902 Edge feeder for strips & rolled material 1906 Glue application station (sensing nozzle) with cartridge reservoir Processing of EVA & PUR cartridges 1918 Pneumatically swiveling cutoff unit 0 - 12° 1942 M Multifunction milling unit flush/chamfer/radius, pneumatic with motorized adjustment Dcodpfexuiyajx Adasp 1929 Radius scraper blade 1983 Contour milling unit 1964 Surface scraper blade 1940 Scraper unit

Condition: ready for operation (used), Bosch SPM 17-TB spindle module, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Dcedpfoi D Uf Nex Adaep

Condition: used, Year of construction: 2017, lifting height: 25,000 mm, fuel type: diesel, Field of application: Construction Dsdpfx Adoxbp Sioaecp Empty weight: 3.300 kg Lifting capacity: 230 kg Working height: 2.700 cm CE mark: yes Delivery terms: EXW Max. horizontal reach: 1640 m Transport dimensions (LxWxH): 6,85x2,2x2,98 Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TB 270.3 Year of build: 2017 Condition: Used Data: Max. working height: 27,00 m Max. platform height: 25,00 m Max. reach: 16,40 m bei 100 kg, 13,10 m bei 200 kg, 12,20 m bei 230 kg Total dimensions LxWxH: 6,85 x 2,20 x 2,98 m Platform dimensions LxW: 1,40 x 0,70 m Max. basket load: 230 kg Swivel range: 450° Support width vertical: 2,20 m Support width one side: 3,10 m Support width both sides: 3,66 m Own weight: 3.300 kg Special features: Rotatable work basket, socket in the work basket, HV support, max. reach of 16.40 m only possible via the rear area. Information: TÜV und UVV neu Location: 41468 Neuss: immediately available

Condition: good (used), Solid TB 16 S bench drill with cross table and stepless speed control. In good condition. Dedoxvaq Sepfx Adajcp

Year of construction: 2012, condition: excellent (used), Machine equipment with 2 working fields. 2 workpieces can be inserted independently of each other. Workpiece dimensions - length 110 - 800 mm - width 20 - 1700 mm - height 14 - 60 mm - Working height 900 mm Machine structure - 1 x horizontal drilling station 0,9 kW. Drill speed 7.200 rpm - drilling depth max. 30 mm - Drill depth 10 mm - total drill length 85 mm - 2 x glue application and dowel insertion station - 2 x dowels, dowel projection 15-20 mm - dowel center distance 96 mm - 2 x oscillating conveyor dowel - 1 x glue pump 18:1 - 2 x electronic glue control ELC - workpiece support table 1700 mm - 8 x workpiece clamping cylinders - Center stop for 4 working fields - Central lubrication with hand pump for grease lubrication - NC positioning of the height adjustment of the drilling and doweling station (Z-axis) - axis with position control, travel speed 12 m/min KOCH Numeric positioning control with 1 NC axis (X) Dedpfxemrqrie Adajcp

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min Dcodpfx Ajxnmvfodajp X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2001, total length: 5,650 mm, total height: 1,750 mm, total width: 1,100 mm, Price: On request - Year: 2001 - Documentation available: No - Serial number: 468/0-103 - Transport dimensions: 5650mm x 1100mm x 1750mm (l x w x h) Dcjdpfsxlqpdex Adajp - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Dodpfxjwka Nye Adaecp Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: good (used), Year of construction: 2015, lifting height: 20,350 mm, fuel type: diesel, Empty weight: 3.460 kg Lifting capacity: 200 kg Working height: 2.235 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Transport dimensions (LxWxH): 7,25x2,1x3,01 Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TB 220.2 Year of build: 2015 Condition: Used Data: Max. working height: 22,35 m Max. platform height: 20,35 m Max. reach: 14,00 m Total dimensions LxWxH: 7,25 x 2,10 x 3,01 m Platform dimensions LxW: 1,38 x 0,68 m Max. basket load: 200 kg Swivel range: 225° Ground pressure: 27 kN (vorne) / 16 kN (hinten) Ground clearance: 0,25 m Support width vertical: 2,10 m (vorne) / 2,10 m (hinten) Support width one side: 2,78 m (vorne) / 2,75 m (hinten) Support width both sides: 3,48 m (vorne) / 3,33 m (hinten) Support length: 3,95 m breit/ 2,98 m schmal Own weight: 3.460 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket, maximum tilt angle 5°, loading area with side boards, automatic return to base position, lift automatic. Information: Tüv and UVV new Dcodpoxbq E Dofx Adajp Location: 41468 Neuss immediately available

Condition: excellent (used), Year of construction: 2013, KAESER TB19 compressed air refrigeration dryer, with energy-saving SECOTEC control system. Year of manufacture: 2013 Technical specifications: Flow rate: 2.10 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to +43°C Max. compressed air inlet temperature: +55°C Compressed air connection: G 1" Dimensions (W x D x H): 620 x 540 x 963 mm Weight: 108 kg Dcedpjwmxb Tjfx Adaep Power supply: 230 V / 1 / 50 Hz Location: from stock, 54634 Bitburg - available immediately -

Year of construction: 2018, operating hours: 31,241 h, condition: like new (used), machine/vehicle number: IntNr231416, CNC-DMG Gildemeister MULTISPRINT 36 / SWISSTYPE machining up to 170 mm turning length Year of manufacture: 2018 Operating hours: 47,548 Machining time: 31,241 Status: October 2025 Control: Fanuc 30i B Maximum flexibility of the MULTISPRINT thanks to its modularity and Y-axes on every spindle position. Use of driven tools on all spindle positions. Y-axis available on all spindle positions as standard. SWISSTYPEkit for short and long turning up to 170 mm length. Chuck or bar machining: bars from 4 to ø 36 mm, chuck parts up to ø 50 mm. Double rear and off-center machining possible. Machine type: Multi-spindle automatic lathe SWISSTYPE machining: up to 170 mm turning length Control: FANUC Series 30i Maximum flexibility thanks to modularity and Y-axes on all spindle positions Use of driven tools on all spindle positions Machining: bars from Ø 4 – 36 mm, chuck parts up to Ø 50 mm Double rear and off-center machining possible Dsdpfx Adoxrc Rgoascp Performance Data Feature Value Max. workpiece diameter 36 mm Max. workpiece length 170 mm Max. bar capacity 36 mm Travel (X / Y / Z) 50 / 100 / 170 mm Main spindles Number: 6 C-axes (angular resolution): 0.002° Cross slides: 6 × (X-/Y-axis) Travel Z1–Z6: 170 mm (with SWISSTYPE-Kit) Max. bar capacity: Ø 40 mm Spindle speed: up to 7,500 rpm Drive power (100% duty cycle): 3 kW Torque (100% duty cycle): 32 Nm Drum indexing time: 0.65 s Counter spindles / Pick-up spindles Quantity: 2 (C-axes with X-/Y-/Z-axis) Through bore: Ø 40 mm Spindle speed: 7,500 rpm Drive power: 3 kW Torque: 32 Nm Travel (Z7–Z8): 410 mm Travel (X7–X8 / Y7–Y8): 277 / 312 mm Rapid traverse speed: 40 m/min Tool holders on cross slides Max. number of tools: 3 Spindle speed: 3,900 / 8,000 rpm Drive power (100% duty cycle): 0.9 kW Torque (100% duty cycle): 5.8 / 2.9 / 1.7 Nm Travel (X1–X6 / Y1–Y6): 50 / 100 mm Rapid traverse speed: 20 m/min Slides for rear machining Spindle speed (U7–U8): 3,900 / 8,000 rpm Drive power: 0.9 kW Torque: 5.8 / 2.9 / 1.7 Nm Control display: 15" color monitor (×2) Clamping system: Hainbuch TOPlus 40 quick-change collet chuck Hinged belt chip conveyor with lift pump High-pressure oil system (filters 50 / 25 µm, pumps 5 / 12 MPa) Various tool holders Fire extinguishing system Bar loading magazine (surface loader design) Workpiece loading system The machine is fully functional both electrically and mechanically and can be inspected under power by appointment. Subject to technical changes and errors and prior sale!

Condition: used, mileage: 63,431 km, power: 96 kW (130.52 HP), first registration: 04/2015, overall weight: 3,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 11/2027, gearing type: mechanical, emission class: euro5, Year of construction: 2015, Internal vehicle number: VTC9015 Dcsdow Hi Anjpfx Adasp German vehicle More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Ruthmann Steiger TB 220 V3 Year of manufacture: 2015 Maximum load capacity: 200 kg Permitted number of persons: 2 Platform payload: 40 kg Subject to errors and omissions. We are happy to accept your used vehicle in part exchange. Financing available directly in-house. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, Technical Data: Working length: 1020 mm Max. sheet thickness: 2.5 mm Max. opening width: 48 mm Bending angle: 0 - 135° Width: 1350 mm Djdect Rzbopfx Adajcp Depth: 820 mm Height: 1140 mm Weight approx.: 285 kg Features: - Versatile bending machine suitable for sheet metal shops and repair workshops - Sturdy construction with modern design - Easy adjustment of the upper beam via foot pedal, keeping hands free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a wide range of bending operations - Excellent price-performance ratio - Fast and simple bending process using the handle - Non-slip rubber coating on the foot pedal for safe operation - Easy lower beam adjustment according to sheet thickness - High upper beam for manufacturing deep-flanged profiles

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach Dcjdpfjv Sv Enjx Adaep

Condition: good (used), functionality: fully functional, Industrial version! Holder: MK 2 – Drilling capacity in steel: 14 mm . Speed range approx.: 650 - 2000 rpm and 1300 - 4000 rpm Dcedpfx Aoxu Nf Asdajp . With intermediate table, W x D approx.: 280 x 250 mm

Condition: new, Year of construction: 2025, - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Continuously variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electric. Protection - Connection cable with Schuko plug TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column diameter: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: digital Dedpfsfx U D Asx Adascp - Drilling depth display: digital - Feed (mm/revolution): by hand - Spindle speeds continuously variable: 60 – 6,000 rpm - Continuous/normal drilling capacity: 10/12 mm - Thread cutting capacity (depending on pitch): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION drilling package 1 (No. 296570) Machine vice Flott [felix] 2.0 80 and keyless drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE DELIVERY (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Year of construction: 2014, condition: ready for operation (used), This Bystronic TB LK 2.70 2.50 VL 1AS was manufactured in 2014. It includes an edge removal machine, washing machine, inspection and frame placement station, assembly, gas filling, and pressing machine, spacer applicator, and sealing machine. Consider the opportunity to buy this Bystronic TB LK 2.70 2.50 VL 1AS. Contact us for more information. Application Types Dodpfsxn Dk Tex Adascp Other Machine Tools

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - Max. turning diameter : 120 [mm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.1 [°] POWER SUPPLY - Supply voltage : 230 [V] - Total installed power : 7.5 [kW] WEIGHT & DIMENSIONS Dcodpju E U Ufsfx Adasp - Machine floor space : 5.400 x 1.900 [mm] - Machine height : 2.000 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 33912 [h] - Number of working hours : 21069 [h] EQUIPMENT - CNC : FANUC 160i - Coolant tank - Chips conveyor - Parts catcher - Parts conveying strip

Year of construction: 2001, condition: used, Sottoriva Dedpfx Ajdqapbjdajcp Sprint 30 serial: B31656 2001, 30L spiral mixer, variable speed, stainless bowl and contact parts, safety guard, with timer