Used Tea Cop Glasse Machine for sale (68,861)

Condition: excellent (used), Year of construction: 2009, Vertical glass drilling machine SCHRAML topDRILL 130 NC Year of production: 2009 Maximum working height: 1300 mm NC controlled Very good and clean condition Surplus drilling/countersink bits included As is Hfjdeyfrvyopfx Aqiek Available immediately

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, Horizontal glass washing machine BENTELER tecLine 25/3 Year of production: 2003 Maximum glass working width: 2500 mm Hsdjx Ecv Ajpfx Aqiofk 3 pairs of brushes (6 pcs.) Very good and clean condition As is Available immediately

Condition: excellent (used), Year of construction: 2016, MBR RADOVANOVIC WSR-27 Maximum glass height: 2700 mm Working direction: from left to right (L-R) PLEASE NOTE Machine excluding inlet and outlet conveyors Very good and clean condition Good working order Available immediately Hjdpjq Ih Nyefx Aqisfk

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Horizontal glass washing machine TRIULZI SY 2600 6.3.6 Year of production: 2007 Maximum working width: 2600 mm Minimum glass size: 180 x 250 mm Glass thickness: 2 - 35 mm Working speed: 2 - 8 m/min (by inverter) Washing machine consists of: - inlet conveyor approx. 1000 mm long, - pre-washing, - 3 pairs of brushes (6 pcs.), - 3 pairs of air drying knifes (6 pcs.), Hfedpfsx Ecwmox Aqiok - 3 water tanks (two with heating), - outlet conveyor approx. 1400 mm long. Total length approx.: 6900 mm Very good and clean condition As is Available immediately

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Horizontal glass washing machine BAVELLONI HW 2200 Year of production: 2022 Maximum glass working width: 2200 mm 3 pairs of brushes (6 pcs.) As new condition ! Hodpfeytgi Dex Aqisfk Very little used ! Available immediately

Condition: refurbished (used), Year of construction: 2008, functionality: limited functionality, operating hours: 20,000 h, power: 60 kW (81.58 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total width: 11,000 mm, total length: 12,000 mm, air pressure: 8 bar, pressure: 8 bar, Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Hfedpfx Aqexxaitoiek

Condition: used, Year of construction: 2001, machine/vehicle number: 526/01, functionality: fully functional, operating hours: 60,000 h, input voltage: 380 V, type of input current: three-phase, feed length X-axis: 1,250 mm, Used glass drilling machine with automatic ruler. In good condition. Hfjdpfxex Rp Rgs Aqisk

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 04121522, total length: 10,000 mm, total width: 2,300 mm, total height: 1,500 mm, overall weight: 6,200 kg, input current: 64 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 380 V, power: 34 kW (46.23 HP), operating speed: 5 mm/s, Manufacturer: Bovone Model: ELB 14-45 Year: 2004 Power: 34 kW Voltage: 380 V Frequency: 50 Hz Weight: 6200 kg Machine type: Glass straight line edging machine Application: Grinding and polishing flat glass edges Origin: Italy Hedeyw Udrepfx Aqiefk Applications Suitable for: • Flat glass processing • Mirror manufacturing • Furniture glass production • Architectural glass • Interior glass elements • Glass fabrication workshops

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02022512, total length: 8,200 mm, total width: 1,200 mm, total height: 2,300 mm, overall weight: 3,400 kg, type of input current: three-phase, input voltage: 380 V, working height: 900 mm, power: 30 kW (40.79 HP), operating speed: 5 mm/s, Manufacturer: Bovone Model: ELB 10 Machine type: Glass straight line edging machine Year: 2002 Power: 30.5 kW Voltage: 380 V Frequency: 50 Hz Weight: 3400 kg Machine configuration: Straight line glass edging and polishing Origin: Italy Applications Suitable for: • Flat glass processing • Mirror manufacturing • Furniture glass production • Architectural glass fabrication Hjdpoyw Ucbjfx Aqiefk • Interior glass elements • Glass workshops and factories

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 301 S PVC KALIPSIZ MODEL (MOLDLESS) CAM ÇITASI KESME MAKİNASI, • Complies with CE standards. • 45-degree cutting of PVC beading profiles performed with 4 saws. • Adjustable for 12 different beading cut types. Hodpfeq U Tbrox Aqisfk • Ability to cut 2 beadings simultaneously. • 2.5-meter right/left conveyor system for long beadings. • Beading claw adjustment mechanism. • Pneumatic clamping system. • Optionally equipped with diamond-tipped saw for aluminum beading cutting (with cooling system). • Air gun. • Adjustable cutting speed. • Compatible with digital meter connection. • Operable with Bluetooth measuring station.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 301 PVC CAM Çıtası KESME MAKİNESİ, • Conforms to CE standards. • 45-degree cutting capability for PVC glazing bead profiles. • Automatic operating system. • 2.5-meter conveyor system for long frames. • Adjustable cutting speed. • Pneumatic profile clamping system. • Saw blade diameter Ø200 millimeters. Hfedsq U Tbkepfx Aqisk OPTIONS • Left conveyor attachment capability. • Notching saw. • Connectivity for digital meter. • Capability to connect a Bluetooth measuring station.

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: Hfodjq I N H Njpfx Aqijk - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes. Technical details We have different options for different requirements, please contact our team for more info.

Condition: good (used), mileage: 453,030 km, power: 420 kW (571.04 HP), first registration: 02/2017, fuel type: diesel, axle configuration: 6x2, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 9,500 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 7,250 mm, loading space width: 2,550 mm, loading space height: 990 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, electric window regulation, power assisted steering, trailer coupling, = Additional options and accessories = - Brake booster - Low noise - Speed limiter - Alloy wheels - Air suspension - PTO - Rotating beacon - Reversing camera - Sun visor - Tow hitch = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,777 cc Front axle: Steered Rear axle 1: Lift axle; Steered Weights Unladen weight: 11,414 kg Payload: 15,586 kg GVW: 27,000 kg Functional Body manufacturer: RESSENIG MACHINE TRANSPORTER Loading platform height: 99 cm Hsdpfx Aqjzg Epheiefk Condition Technical condition: good Optical condition: good OFFER – Volvo FM 420 6x2 Towing and Transport Vehicle Chassis Make: Volvo FM 420 Axle configuration: 6x2 Engine power: 420 hp Emission standard: Euro 6 Automatic transmission Fully air-suspended chassis Day cab Air conditioning Alcoa alloy wheels Body Professional vehicle transporter equipped with: Loading platform made of hardwood Hydraulic winch Hydraulically operated ramps Dimensions of the ramps Length: 4,000 mm Width: 650 mm Dimensions of the loading platform Length: 7,250 mm Width: 2,550 mm Loading platform height: 990 mm The generous loading platform in combination with the extra-long hydraulic ramps makes this transport vehicle ideal for the safe and efficient transport of: Passenger cars Vans and light commercial vehicles Agricultural machinery Aerial work platforms Forklifts Construction machinery Other mobile vehicles and machines Thanks to the low loading platform height and the fully air-suspended chassis, a particularly shallow loading angle is achieved. This means that vehicles and machines with low ground clearance can also be easily loaded. Weights Unladen weight: 11,415 kg Maximum payload: 15,585 kg Key features ✔ Volvo FM 420 – 420 hp Euro 6 ✔ 6x2 axle configuration ✔ Automatic transmission ✔ Fully air-suspended chassis ✔ Day cab with air conditioning ✔ Loading platform made of hardwood ✔ Hydraulic winch ✔ Hydraulically operated ramps ✔ 4-meter long ramps ✔ Alcoa alloy wheels ✔ Loading platform 7,250 × 2,550 mm ✔ Loading platform height only 990 mm ✔ Maximum payload of 15,585 kg Area of application This Volvo FM 420 has been developed for professional use in vehicle recovery, vehicle transport, and machine transport. The reliable Volvo powertrain, the fully air-suspended chassis, and the high-quality transport body ensure maximum reliability, easy operation, and low operating costs. A versatile transport solution for companies that rely on quality, safety, and efficiency every day.

Condition: ready for operation (used), * Brand: SBM Austria * Model: hopper with vibrating chute and screening machine * Type: Grizzly * Dim. hopper: 6000 x 2500 x 1000 mm * Vibrating chute: length 3500 mm - width 1200 mm. Hfodpfxeywm Rdo Aqiok * Driving: 2 pieces vibration motors of each 3,5 kW. * Surface screen: 2200 x 1200 mm. * Driving: 11 kW E-motor.

Condition: excellent (used), mileage: 184,731 km, power: 324 kW (440.52 HP), first registration: 01/2021, fuel type: diesel, wheelbase: 5,600 mm, fuel: diesel, fuel tank capacity: 500 l, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space length: 9,600 mm, loading space height: 1,200 mm, Year of construction: 2021, Equipment: AdBlue, = Additional Options and Accessories = - PTO = Further Information = Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 13,230 kg Payload: 12,770 kg Gross vehicle weight: 26,000 kg Body brand: CVIM FRANCE OPRIJWAGEN/MACHINE TRANSPORTER/PLATFORM Load platform height: 120 cm Technical condition: very good Visual condition: very good RENAULT C 440 DTI 6X2 TRANSPORTER/MACHINE CARRIER/PLATFORM EURO 6 L PACKAGE 440 HP DRIVE 6X2, REAR AXLE LIFT AND STEERABLE WHEELBASE 560 CM AIR SUSPENSION DIFFERENTIAL LOCK DAY CAB FULL OPTIONS: AIR CONDITIONING, NAVIGATION, Hjdpfeyk Du Ejx Aqisfk AUTOMATIC TRANSMISSION SMALL TRAILER COUPLING LOADING PLATFORM WITH HYDRAULICALLY MOVABLE REAR WITH HYDRAULICALLY EXTENDABLE RAMPS LENGTH 960 CM FLOOR HEIGHT APPROX. 120 CM LASHING EYES LARGE HYDRAULICALLY ADJUSTABLE RAMPS LARGE WINCH WITH REMOTE CONTROL 2X REAR SUPPORTS TOOLBOXES COMPLETE BODY CONTROLLED BY REMOTE FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINES OFFERED FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, Year of construction: 2008, total length: 1,750 mm, total width: 1,500 mm, total height: 1,450 mm, Colour: White Empty weight: 750 kg Price: On request - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 108/1008-3 - Main motor power [kW]: 4.0 - Number of spindles [pcs]: 2 - Max. workpiece width [mm]: 180 - Transport dimensions: 1750mm x 1500mm x 1450mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Hedoych Eljpfx Aqiefk

Condition: ready for operation (used), Year of construction: 1984, Deckel Copy Milling Machine Model KF 3 S Year of manufacture: 1984 Table surfaces: 600 x 555 / 620 x 750 mm Y-axis travel: 150 mm Z-axis stroke: 380 mm X-axis stroke: 150 mm Drive: 3 kW Hjdpfezukc Nex Aqiefk Roughing spindle Finishing spindle Locking arm Control lever with cable Tracing stylus holder Collets Weight: 2400 kg Price: EUR 2,000—plus VAT, ex works

Condition: good (used), Year of construction: 2021, machine/vehicle number: 178000041, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 12,000 rpm, total length: 4,000 mm, total width: 1,500 mm, total height: 1,500 mm, overall weight: 500 kg, ELUMATEC KF 178 Copy Milling Machine Hfodpfx Aqsztwzcoiok - Rated current: 6.3 A - Power input: 2200 W - Length of the left and right stops: 1600 mm FCA D-73235 Weilheim Teck - loaded onto a truck.

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, woodturning lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs for turning and milling operations can be stored. Hydraulic copy sensing of a template or pattern. The roughing and copying tools are equipped with fine adjustments. Template adjustment can be made from the front and rear via fine-thread spindles. The copying length can be divided into up to 6 sections with different feed rates for turning heavily profiled workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belts; within the stages, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 RPM Speed stage 2: 350 - 3400 RPM Distance between centers approx. 1550mm Hfjdpfjzfwm Njx Aqiok Copying length with steady rest approx. 1350mm Bed length approx. 2100mm Feed rate continuously adjustable, rapid traverse with safety end stop Hydraulic copy slide with V-turning tool Spindle with M33 thread and MK3 internal taper Tailstock MK3 and with quick-release mechanism Many accessories: Ring steady rest with front turning tool and insert aid Four-jaw steady rest Four-jaw chuck 125mm Copying tools, center punches, hexagonal drive, etc. Milling unit with 3kW motor for mounting on the copy slide 5 milling heads available, only the 16mm collet is missing CE marking Operating manual V-belts new Original paint, only a few spots touched up Very good condition from a small carpentry shop It is evident that the machine was not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (LxWxH). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse and ready for demonstration; see "other offers from this supplier."

Year of construction: 1999, condition: ready for operation (used), Copying range U/V: 1400mm/1060mm, table longitudinal movement U: 1500mm, column transverse movement V: 1060mm, headstock vertical movement W: 900mm, max. spindle-table distance: 1025mm, probe adjustment range X/Y/Z: 300mm/150mm/250mm, probe mounting swivel range: +/- 15°, speed: 4000rpm. Including documentation, headstock and spindle. Hjdpfx Ajh Tkn Noqiefk

Condition: used, Year of construction: 2017, machine/vehicle number: O3pl, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 230 V, input frequency: 60 Hz, type of input current: AC, rip fence adjustment: manual, actuation type: pneumatic, rotational speed (max.): 12,000 rpm, rotational speed (min.): 12,000 rpm, table width: 330 mm, table length: 2,400 mm, total length: 2,600 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 540 kg, PEMAC 03PL 3-head copy milling machine – Year of manufacture 2017 – Ready for immediate use Very well-maintained PEMAC 03PL copy milling machine for aluminum profiles, manufactured in 2017. The machine has always been used in a commercial setting, is well-maintained and is in fully working order. Inspection and test runs are possible. Specifications Hfjdpfx Aqozlar Ueisk Year of manufacture: 2017 230V (1-phase) 3 milling heads Spindle speed: 12,000 rpm Working pressure: 6–7 bar Weight: approx. 540 kg Included 35 used and new milling cutters Video of the machine in operation available Optionally available: Tekna TK280 punching machine (2012) Compressor Asking price: €9,500. Serious offers will be considered.

Year of construction: 1980, condition: good (used), Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine Hsdpfx Aqogfcm Aoisfk -Area of application: Processing of aluminium and steel profiles -with 1 vertical and 1 horizontal milling motor -per engine: 0.74 kW 12,000 rpm -Installation dimensions 2800/1100/H1630 mm -Transport dimensions 800/1200/H1630 mm -Weight: 270 kg

Condition: used, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Manufacturer: Elu, copy milling machine type AS 70 -Milling length: 365 mm -Milling width: 100 mm -Milling stroke: 45 mm -Motor: 220/380V 740W Hedpfx Aeif Huvoqisfk -Spindle speed: 12000 rpm -Dimensions: 800/750/H1320 mm -Weight: 108kg

Condition: used, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Copy router: Wegoma SK6 -Copy router: swiveling -with support rail length: 1910 mm -Motor: 220 V 1.4 kW -Spindle speed: 22000 rpm Hfsded Skkvjpfx Aqijk -Dimensions: 500/460/H1530 mm -Weight: 46.5 kg

Condition: good (used), – 2 pneumatic clamps Hsdpsxtvi Esfx Aqisfk – 380V