Used Three Knife Machine for sale (68,691)

Condition: excellent (used), Year of construction: 2020, Ref: 11147 . 2020 Horizon HT-80 Three-Knife Trimmer Fully automatic three-knife trimmer designed for short-to-medium-run and digital/book-of-one production. Can work offline or inline with Horizon binders up to 1,000 cycles/hour, 51 mm book thickness, automatic setup and book-of-one capability Features: Automatic size setup via colour touchscreen: input the untrimmed and finished book dimensions and the machine automatically positions the relevant sections. Servo-controlled jogging and clamping provide accurate registration, while the swing-knife cutting action is designed to give a clean three-side trim. Also capable of book-of-one production. Books of the same finished size but different thicknesses can be processed consecutively It can run inline with Horizon BQ-470, SB-07 and SB-09S systems, as well as offline. Specification: Lajdpfx Ajz Akmkob Njh Untrimmed book size – Max. 330 × 330 mm Untrimmed book size – Min. 145 × 105 mm Finished book size – Max. 300 × 300 mm Finished book size – Min. 139 × 99 mm Book / trim thickness: 1–51 mm Maximum head & foot trim: 30 mm each Maximum fore-edge trim: 30 mm Production speed: 400–1,000 cycles/hour Clamping pressure: 4–8 kN, up to 10 kN depending on conditions Clamp drive: Servo motor Standard formats: A4, A5, 8.5 × 11", 5.5 × 8.5" Job memory: 200 jobs Dimensions: 1,610 × 2,610 × 1,515 mm W × D × H Power: 3-phase, 200–230 V, 50/60 Hz; 380/400/415 V versions via transformer

Condition: excellent (used), Year of construction: 2016, Ref: 11131 . 2016 Horizon HT-110 Three Knife Trimmer Excellent condition! Only 196,000 books cut! Inline or offline trimmer capable of rates of up to 4,000 books/hour. Features: The trimmer is simple and easy to operate, with all necessary setup performed through the icon-based touchscreen. Laedpfszq D Iqsx Ab Nsh Can run at speeds up to 1,600 cycles per hour. Can also reach production speeds up to 4,000 books per hour by stacking up to 3 books at once. Can be run inline as part of the CABS Perfect Binding System, but it can also be run offline as a standalone trimmer. Specification: Untrimmed Book Size (Spine × Fore-edge) * 148 × 105 mm to 410 × 320 mm Finished Book Size (Spine × Fore-edge) * 145 × 103 mm to 366 × 300 mm Trim Width * Fore-edge: 45 mm * Top-Bottom: 30 mm Trim Height (book thickness/spine thickness) * 2 mm to 100 mm Production Speed 400 to 1,600 cycles/hour

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) Ljdpfsz Ix Ukjx Ab Noah • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Lodpfx Abez N Sfmj Noah Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: used, Year of construction: 2011, Three knife trimmer Kolbus HD 143.P Year: 2011 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Counter: 12.560.000 books Ljdpfez Eaq Iox Ab Neah Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): (4-18) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Max. mechanical speed: 7.500 single products/hour or 4,200 single products/hour from 40 mm product thickness on Maximum size (cutted): 305 x 420 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum size (uncutted): 320 x 450 x 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, Lasdpfoz St Hwox Ab Noh coolant, Low Volt light.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS Ledpfx Absz Eh Egs Nsah WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC. Laodpfxjz R Rbds Ab Nsh

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, REFORM AR 101/61 Blade grinding machine available immediately. 8100mm grinding length Laedjygvluspfx Ab Noh Please contact us for more information.

Condition: excellent (used), Year of construction: 2023, 400mm swing, Lajdpfjz Srv Dsx Ab Neh 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: good (used), Max. grinding length: 3000 mm Max. grinding width: 250 mm Ljdpfx Aboz Tc Rhs Neah With electromagnetic bar, swiveling.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Laedpfsxxb Rrex Ab Njh Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Technical Specifications * Manufacturer: Wohlenberg Schneidesysteme GmbH * Model: Trim-tec 60 i * Machine Type: Three-knife trimmer Lsdpfx Aez Rkp Teb Njah * Year of Manufacture: 2007 * Cutting Performance: 500–3,600 stacks/hour * Max. untrimmed format (automatic feed): 320 × 420 mm * Min. trimmed format: 85 × 145 mm * Max. trimmed format: 300 × 400 mm * Product stack height: 5–70 mm * Min. sheet thickness: 2 mm * Max. press platen opening: 100 mm Trimming Dimensions * Front trim: max. 24 mm * Head trim: max. 25 mm * Foot trim: max. 25 mm Condition and Maintenance The machine is currently still in operation and can be inspected and demonstrated while running, by arrangement. The following maintenance measures have been carried out: * New display in 2024 * New batteries in May 2026 Currently, no defects or malfunctions are known.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm Lajdpfx Aex D Tbmob Nsh 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Lodezrnkrepfx Ab Neah Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: used, Year of construction: 2004, Format: 310 x 430 mm Equipment: Counter 22 Mio Co-Pilot with Touchscreen Infeed conveyor from the right Automatic Magazine for In-line Production Counting Stacker Product Counter Tool Presetter Ljdpjy Tacxefx Ab Nsah Total number of knife sets: 1 Interchangeable Cutting Cassettes (Standard Set)

Condition: used, Weinig Rondamat 929 knife grinding machine for the manufacture of profiled knives. Production from a straight blank or regrinding of used knives using a template. Technical data: Lsdpfx Abszrx Hqe Njah - Maximum grinding wheel diameter: 225 mm - Maximum tool diameter: 300 mm - Minimum tool diameter: 80 mm - Maximum tool width: 230 mm

Condition: used, Year of construction: 2000, grinding length: 240 mm, feed length X-axis: 50 mm, feed length Y-axis: 50 mm, feed length Z-axis: 240 mm, grinding width: 300 mm, WEINIG RONDAMAT 970 – Profile and Tool Grinding Machine – Year of Manufacture 2000 For sale is a WEINIG Rondamat 970, year of manufacture 2000, a high-quality automatic profile and tool grinding machine from Michael Weinig AG. The machine is suitable for manufacturing and re-sharpening profile and planing knives, as well as for grinding tools and knife heads. Profile tools can be manufactured manually using a template and then automatically re-sharpened. The machine is also suitable for re-sharpening planing knives in the knife head. Technical Data * Manufacturer: Michael Weinig AG * Type: Rondamat R 970 * Year of Manufacture: 2000 * Machine No.: 91176 * Tool Diameter: 100–300 mm * Max. Tool Width: 240 mm * Grinding Wheel Diameter: 150–225 mm * Grinding Wheel Bore: 60 mm * Grinding Wheel Width: 2 / 3 / 4 / 10 mm * Grinding Spindle Speed: 1,500–3,000 RPM * Grinding Spindle Drive: 1.1 kW * Total Connected Load: approx. 2 kW * Coolant Tank: approx. 50 liters * Operating Voltage: 380 V / 50 Hz * Back Angle: 10–30° * Lateral Clearance Angle (manual): 0–20° * Lateral Clearance Angle (automatic): 2.5 / 5 / 7.5 / 10° * Relief Angle for Planing Knives: 60° * Automatic Indexing: up to 16 knives Ledpfez Evalox Ab Noah * Precision: Grinding tolerance under 0.005 mm. Suitable for: * Profile knives * Planing knives

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Lsdpjz Iz Imjfx Ab Noah Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2015, Three knife trimmer Kolbus HD 143.P Year: 2015 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Cycles: 12,9 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): (4-18) Laedpfjzx S Rijx Ab Njh - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Max. mechanical speed: up to 4.200 cuts/h Maximum size (uncutted): 450 x 320 x 80 mm Maximum size (cutted): 420 x 305 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum pile height: 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: ready for operation (used), IN STOCK stack lift 650 kg Laodpfxjir A Iqj Ab Neh

Condition: good (used), Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, coolant pump power: 150 W, grinding spindle motor power: 1,500 W, overall weight: 510 kg, grinding wheel diameter: 230 mm, For sale: Wadkin copy sanding machine in tidy condition with a wide working capacity. Lasdpfx Asyk S U Tob Noh

Condition: excellent (used), Catalog number: 8124 TECHNICAL DATA - Shaft width: 510mm - 4-knife shaft - Max. thickness of workpiece on thicknesser: 200mm - Max. thickness of workpiece on side heads (3-sided): 100mm - Top: - Pawls - Toothed infeed shaft - Pressure roller - Planing shaft - Smooth outfeed shaft Ljdpfx Abjz Rpkcs Noah - Bottom: - Guide strip - Adjustable rollers in the lower table, 2 pcs - Rear: - Side spindles + pressure roller, 2 pcs - Spindle height: 100mm - Spindle diameter: 30mm - Adjustable spindles (left/right) - Side spindle motors: 2 x approx. 1.5kW - Main motor: 7.5kW - 2 types of feed speed - Dust extraction port: 2 x 100mm, 1 x 120mm - Overall dimensions (L/W/H): 1700x1300x1160mm - Weight: 1103kg ADVANTAGES - Polish-made - Shaft with 4 knives - Used planer, very good condition Net price: 14900 PLN Net price: 3470 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1978, Knife grinding machine with 1300 mm grinding length, equipped with a swiveling magnetic rail. The machine is labeled Vollmer but was built by Reform. Function tested. Laedpfx Asynt I Nob Njh

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, WEINIG Rondamat 1000 CNC – High-precision knife grinding machine For sale is a used WEINIG Rondamat 1000 CNC, manufactured in 2016. The Rondamat 1000 CNC is a high-precision CNC knife grinding machine for fully automatic sharpening and manufacturing of profile knives, as well as for re-sharpening of straight planer knives and profile knives in the knife head. Technical data and equipment: * Manufacturer: WEINIG * Model: Rondamat 1000 CNC * Year of manufacture: 2016 * High-precision knife grinding machine * Automatic import of CNC programs from Moulder Master * Fully automatic sharpening and manufacturing of profile knives from a blank * Fully automatic re-sharpening of straight planer knives and profile knives in the knife head * Grinding of planer knives in the planer head with standard knife overhang possible Grinding unit: * Solid spindle carrier with precise guides * Roundness accuracy less than 0.005 mm * Motorized radial adjustment for different grinding wheel diameters * Back clearance angle fully automatically adjustable * Lateral clearance angle fully automatically adjustable * Grinding spindle with HSK mounting * HSK 50F * Grinding wheel diameter: 150–200 mm * Grinding wheel width (Borazon/Diamond): 2 / 3 / 4 / 10 mm * Grinding wheel bore: 60 mm * Grinding spindle drive: 1.5 kW (2 HP) * Grinding spindle speed: 1,500–3,000 rpm, frequency-controlled * Radial clearance angle grinding: 10–30° * Lateral clearance angle: 0–20° Automatic equipment: * Automatic grinding wheel measurement using a mechanical measuring process * Automatic compensation for grinding wheel wear * Automatic tool changer * Grinding wheel magazine with 3 magazine slots * Coolant system * Automatic coolant cleaning via a transport filter system * Coolant tank approx. 70 liters * Coolant additive: 5 liters * Coolant pump: 210 W * LED light for the machine interior Tool holder: * System "PowerLock 360" * Suitable for grinding PowerLock tools and large-sized boring tools * Max. tool weight: 80 kg * Tool holder with manual HSK quick-change system Lajdpfx Aboz Eypde Njh * Interchangeable receiving spindle for right and left tools * Max. tool width: 360 mm * Max. tool circle diameter: 300 mm * Min. tool circle diameter: 90 mm * PowerLock adapter for conventional tools, shank diameter 50 mm * Additional dividing head * Additional PowerLock adapter for conventional tools 40 mm or 50 mm Electrical data: * Operating voltage: 400 V * Voltage range: 380–420 V * Frequency: 50 Hz * Total connected power: approx. 3 kW (4 HP) Operation and control: * Operation from the front * Graphical user interface * Connection to WEINIG Moulder Master * Management of grinding wheels * Management of CNC programs * Setting of machining parameters such as feed speed, depth of cut, and feed cycles * Setting of tool parameters such as number of cutting edges, tool diameter, and blank material * Display of the current machining progress * CNC program generation in conjunction with Moulder Master