Used Tilting Device for sale (14,112)

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, overall weight: 2,000 kg, repeat accuracy: 0.01 mm, The machine was completely overhauled in 2020 and equipped with new measuring components. TECHNICAL DETAILS Measuring range X-axis: 700 mm Measuring range Y-axis: 600 mm Measuring range Z-axis: 500 mm Repeatability: 0.01 mm Dcjdoyfz Ulopfx Aa Nod MACHINE DETAILS Software: PC-DMIS CAD++ Version 2018 R1 and 2019 R1 DIMENSIONS & WEIGHT Dimensions (L x W x H): 1,790 x 1,500 x 2,730 mm Net weight: 2,000 kg EQUIPMENT Workstation (PC including software and monitor, 690 x 1,150 x 1,250 mm)

Condition: good (used), functionality: fully functional, Tooth-setting device for bandsaw blades Dsdpjyki Hgefx Aa Njcd

Condition: refurbished (used), Year of construction: 1990, functionality: unexamined, Pattern turning device with height adjustment and electric feed motors. Height adjustment is electric. The price is for the machine as is. Optionally, we can also offer a complete overhaul. Dcodex E Dbcopfx Aa Ned

Condition: used, Year of construction: 2000, Workstation with extraction and filtration system, suitable for dust extraction during plastering work with an angle grinder or also for welding operations. Dcedsyay Rhspfx Aa Nsd

Condition: used, Year of construction: 2001, Table size: 1200x730 mm Table height: 927 mm Dcsdpfx Aaoylcffs Ned Speeds: 900-10,000 rpm Milling arbor diameter: 30 mm Swivel range: -10°/+45° degrees Usable spindle length: 140 mm Spindle right/left rotation: Yes Change spindle: 5 pcs Speed display: digital Automatic motor brake: Yes Fence jaw design: Aigner fence system Fence adjustment: electronic position control Fence execution: swiveling Milling fence display: mechanical numeric display Table extension: double-sided pull-out Workpiece support: Yes Extraction hood: Yes Power feeder: with 4 rollers Control panel position: top Weight approx.: 1190 kg Motor power: 7.5 kW Extraction diameter: 120/120 mm Including tool cart Storage location: Customer

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, total height: 920 mm, load capacity: 250 kg, overall weight: 160 kg, total length: 1,150 mm, total width: 700 mm, TECHNICAL DETAILS Lifting capacity: 250 kg MACHINE DETAILS Dimensions & Weight Dodpeyf At Nefx Aa Nocd Dimensions (L x W x H): 1,150 x 700 x 920 mm Net weight: 160 kg Electrical connection: 400 V

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, total height: 1,200 mm, load capacity: 800 kg, overall weight: 317 kg, total length: 1,600 mm, total width: 900 mm, TECHNICAL DETAILS Dcodpfsyf Anmox Aa Nod Lifting capacity: 800 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 900 x 1,200 mm Net weight: 317 kg Electrical connection: 400 V

Condition: used, d: 50 mm Dcjdpfolf I E Asx Aa Njd Overall length: 435 mm Available: 3 pcs Tool holder length: 340 mm

Condition: excellent (used), max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm Dcjdpovf Riujfx Aa Nsd max. module 0,4 - 8 pressure angle 15 - 25 ° turning speeds 2650 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, Am, ... Adjustment plate on the right with micrometer screw adjustment axial To bracket a diamond roll.

Condition: excellent (used), Year of construction: 1999, max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Dedpfsvibc Hex Aa Njcd Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, AM, ... Adjustment plate on the right with micrometer screw adjustment axial Radial adjustment plate with micrometer screw adjustment 2 precision motor spindles to absorb the diamond discs.

Condition: used, Column-guided bandsaw semi-automatic METORA - KALTENBACH Type HMB 380 DS Only for 90° cuts (Made in Austria) Machine No. 4580028 Year of manufacture: approx. 1993 Cutting capacity round: Ø 380 mm Square: 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Saw band speed: 25–108 m/min, continuously variable Material infeed height: 870 mm Hydraulic drive power: 1.5 kW Dedpfx Aasdzqtgs Njcd Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz - Fully hydraulic bandsaw in double-column design - Hydraulic saw bow descent with stepless adjustable cutting pressure - Stepless adjustable descent speed - Hydraulic vice clamping with hydraulic bundle clamping from above - Hydraulic unit integrated in machine base - Material feed roller on infeed side with geared motor (not mounted on machine frame) - Coolant system with coolant pump for water emulsion - Minimum-quantity lubrication system for the saw blade - Electric heating cartridge for cooling water and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display, and hydraulic stop carriage clamping Stop length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable without roller conveyor Machine footprint (L x W x H): 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Weight of stop system: approx. 800 kg In good condition

Year of construction: 2007, condition: excellent (used), functionality: fully functional, working width: 1,000 mm, machine/vehicle number: XB005M A551335-01, Near-infrared device Tomra Polysort 1000 in very good condition, operated only with dry material. Includes acceleration belt and expansion hood with separation head. Djdpfx Aajymlqmo Nscd

Condition: used, spindle diameter: 30 mm, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, table width: 1,000 mm, table length: 1,200 mm, total length: 1,300 mm, total width: 1,100 mm, total height: 1,500 mm, overall weight: 1,000 kg, height adjustment type: electric, space requirement height: 1,500 mm, space requirement length: 1,300 mm, space requirement width: 1,100 mm, spindle height adjustment: 120 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 3,000 rpm, No. 04514 Tilting spindle moulder Kölle F 45 Dedpfxsyh I Hks Aa Necd Used Spindle diameter 30 mm Table size 1200 x 1000 mm LW Height-adjustable and tiltable Milling spindle can be tilted from -5° to +45° By turning the milling fence by 180°, milling can be carried out at the rear of the machine, resulting in a tilting range of +45° to -45° Height adjustment 120 mm Milling speeds 3000 / 4000 / 5000 / 6000 / 8000 / 10000 rpm Tool holder MK 5 Milling fence with central fine adjustment Technical documentation included Transport dimensions approx. 1300 x 1100 x 1500 mm LWH Weight approx. 1000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Dcedpfxjyqr Sxo Aa Nod

Condition: used, Vacuum lifting device, vacuum lifter RIVATEC UNIGRIPPER Dcjdjwywipopfx Aa Ned Custom-made as a handling device for an industrial robot Year of manufacture: approx. 2008 Load capacity: approx. 50 kg - 7 suction pads Ø 32 mm (design allows for 12) - 16 suction pads Ø 42 mm (design allows for 20) - 5 suction pads Ø 60 mm (design allows for 6) - a few suction cups missing, see photos (bellows suction pads) - swiveling base body for suction surface at 90° angle or flat 180° - base body pneumatically swiveling - Very elaborate and precise construction with linear guides - Flange plate for suspension or attachment to the robot - Equipped with many Festo components Required space (L x W x H): 620 x 300 x 300 mm Net weight: 28 kg Good condition 2 units available, price indicated per unit

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN101660321, 12-month warranty, in stock -Electrically resistance-heated tilting crucible furnace system for melting aluminum -Max. furnace temperature: 1200 °C -Max. melt bath temperature: 1050 °C -Melting capacity: 320 kg Al/h -Controller H 100 (5 programs with 4 steps each) -Includes 2-channel preset timer and 6100A recorder for thermocouple data logging for customer-side connection -No exhaust system required -Integrated safety system: In case of thermocouple failure, the furnace continues operation at reduced power to prevent the melt from solidifying -Temperature limiter for the chamber as overtemperature protection. The limiter disconnects the heating system once the set limit temperature is reached and only reactivates it after the temperature has dropped below the threshold. -Power rating: 140 kW (increased!) -Mains connection: 400V 3/N/PE, 50 Hz -Energy consumption (lid closed/open) approx. 8/17 kW -Weight approx. 3000 kg -External dimensions (L x W x H): approx. 2010 x 2000 x 1460 mm -Documentation, CE declaration Dcsdpfx Aajylkz Uo Nsd Inspection in our warehouse by appointment! Furnace, industrial furnace, melting furnace, tilting crucible furnace, crucible furnace, aluminum melting furnace

Condition: excellent (used), Felder F 700 Z Spindle Moulder 205 cm sliding table integrated in the worktop, Spindle adjustable in height and tiltable 0-45 degrees, Dcjdpjyn Iu Rsfx Aa Ned Interchangeable 30 mm spindle, 7.3 kW motor, electric brake, Forward and reverse rotation, 4 spindle speeds, Very good condition, fully ready for operation.

Condition: used, Dematic roller conveyor transfer device, pusher, 90° 700-1000-690 RA2433 Make: Dematic TZM 90 Running direction: both directions Roller width (RB): 690 mm Nominal/outer width frame (NB): 760 mm Total width: 1000 mm Length: 700 mm Roller diameter: 50 mm Roller distance: 75 mm Frame height: 250 mm Transfer motor: SEW 3x 400V, 0.37 kW Optionally available: Side guide oneand both sides Supports Motor for driving the rollers Additional elements for expansion Net prices plus VAT from the central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. Dedpfx Asxmb Rhoa Njcd With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 1987, condition: used, centre height 390 mm passage of steadyrest 220 mm chucking diameter 400 mm Dedpfohgw Uxjx Aa Nocd total power requirement / kW

Condition: used, Technical details: checking height: ca. 600 mm Dcodpfx Aou N Aw Nsa Nsd voltage: 220V / 80VA machine weight approx.: auf Anfrage kg dimension machine xH: Messständer: 0,75x0,45x1,04 m dimensions L x W x H: Messwertaufnehmer: 0,32x0,51x0,23 m Control unit module TPX Base plate/granite plate with T-slot: Size=L:650 x W:450 x H: 80mm Travelling beam travel Z = 600mm, by hand knob, and swivel 45° Measuring device, type perthometer PRK, size L:330 x W:150 x H:105mm; measuring head insert type Perthon RFHTB-250, Y-travel=60mm automatic/manual, as well as Z-travel=40mm via knurled wheel Measuring sensor, type Perthometer, digital display with printer Equipped with accessory box with various measuring head inserts (photo comparable) *

Condition: used, Technical details: machine weight approx.: auf Anfrage kg dimension machine xH: auf Anfrage m Surface measuring and recording device SP6 2x feeding device PRK 6720702 1x measuring stand PST-Ue ( transverse = 165mm and vertical adjustment = 440mm) table size 650 x 450mm Dcjdpfou N Awvox Aa Ned 1x measuring stand PST-Ve (vertical adjustment 450mm, motorized) + manual control unit; table size 650 x 178mm Perthometer S6P Without base cabinet, without the granite plate shown in the picture. Can be offered separately. i.D. *

Condition: used, Dust suction hood x mm Motor output x kW Air consumption 2000 m³/h Dedpsx U A N Defx Aa Nscd +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), For sale: a robust measuring device from the renowned German manufacturer AbaWerk Aschaffenburg. Made with a cast iron base and equipped with two hardened centering points for securing shafts and cylindrical workpieces. Perfect for use with toolmaker’s microscopes, measuring projectors, and in quality control applications. Technical specifications: • Manufacturer: AbaWerk Aschaffenburg (Made in Germany) • Center distance: approx. 115 mm • Stable, heavy cast iron base – secure clamping • Allows rotation of the workpiece between centers • Condition: used, fully functional Dcodpfx Ajw Sav Ija Nod Manufactured to industrial standards – precision and durability make these units highly sought after in metrology and toolmaking environments.

Condition: used, Year of construction: 1990, Expert Eda450 Size of table plate 450 mm weight of the machine ca. 380 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Dsdpfx Aajf Nlrqo Nocd

Condition: used, Year of construction: 1990, length 3300 mm width 1800 mm Dcodpfx Aaowm Rp Ao Njd height 1800 mm weight of the machine ca. 3,2 t