Used To Dispenser for sale (11,194)

Condition: used, power: 1 kW (1.36 HP), axle configuration: 4x4, Year of construction: 2013, operating hours: 1,523 h, Equipment: all wheel drive, Empty weight: 15.500 kg Please contact Emal Jaweed for more information Nodsx R T Trjpfx Ahzscl

Condition: used, power: 100 kW (135.96 HP), gearing type: automatic, Year of construction: 2021, operating hours: 6,158 h, Empty weight: 7.640 kg Please contact Emal Jaweed for more information Ncjdpfxsx R T Txj Ahzol

Condition: used, mileage: 559,322 km, power: 375 kW (509.86 HP), axle configuration: 6x2, gearing type: automatic, Year of construction: 2016, Equipment: ABS, Empty weight: 20.423 kg Carrying capacity: 5.577 kg GVW: 26.000 kg Please contact Emal Jaweed for more information Nodpfjx R T Tfjx Ahzscl

Condition: used, power: 15 kW (20.39 HP), Year of construction: 2023, operating hours: 457 h, Drive: Track Empty weight: 2.490 kg Please contact Emal Jaweed for more information Njdpfx Ahjx R T Ivszecl

Condition: used, Year of construction: 2012, Equipment: ABS, Empty weight: 1.880 kg Nsdpfx Aex R T Agohzecl Carrying capacity: 2.620 kg GVW: 4.500 kg Front tyre size: 235/75 R 17,5 Rear tyre size: 235/75 R 17,5 Please contact Emal Jaweed for more information

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Ncodpfx Aompfwdohzjl Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: new, fuel type: diesel, overall weight: 16,000 kg, gearing type: automatic, Equipment: parking heater, soot filter, tail-lift, Vehicle number: 550067 Accident-free, full service history, non-smoker ---- DRIVER ASSISTANCE SYSTEMS * Lane change warning system INTERIOR * Left-hand drive * Driver's seat armrest * Electric windows * Black seat belts LIGHTING & VISIBILITY * Green-tinted windows * Daytime running lights WHEELS * Tire pressure monitoring system Additional features -----Color/Paintwork----- * Cab color: H3275WHTE * Headlight surround and bumper color: Stone Grey * Lower and side parts of the cab in Stone Grey * Roof spoiler painted to match cab color * Side fender color: same as cab * Chassis color: grey -----Tires/Wheels----- * Front axle(s): tire size 285/70R19.5, wheel size 19.5 x 7.50 * Driven rear axle(s): tire size 285/70R19.5, wheel size 19.5 x 7.50 * Supplier: Goodyear * Steel disc wheels, silver grey * Decorative wheel trims without center part, silver grey (RAL 9006) * Spare wheel not applicable -----Equipment/Special Equipment----- * Extended Day Cab with steel bumper * Maintenance-free mechanical 4-point cab suspension with integrated shock absorbers * Translucent green external sun visor above windshield * Halogen headlights with double reflector and impact-resistant Lexan lens * Headlight beam pattern for right-hand traffic * Bumper-mounted fog lights * Main mirrors and wide-angle mirrors on driver and passenger sides; kerb mirror on passenger side * Electrically adjustable main mirrors * Mirror brackets for body widths 2.50 - 2.60 m * Front view mirror complies with EU Directive 2003/97/EC Ncsdpfxsxyckpo Ahzsl * Rear view camera with image displayed on dedicated monitor * Central locking system with exterior light function, includes 2 remote controls and 2 transponder keys * Aerodynamic roof spoiler ensures streamlined airflow between cab and body * Extended side fenders * Black steering wheel with soft-touch surface * Rack and pinion steering column, adjustable with mechanical lock * Air-suspended luxury driver’s seat with adjustable damping and pneumatic lumbar support * Fixed passenger seat with integrated headrest and three-point seat belt; Velour seat upholstery with vinyl back * Engine tunnel storage compartment * Manually operated air conditioning with recirculation function * Manual roof hatch * Converter 24 V to 12 V, 15 A, 180 W * ECAS remote control * Universal FMS connector (Fleet Management System) * 10-year PACCAR Connect subscription * Preparation for satellite communication system for German toll (toll collection system) * Digital (smart) tachograph VDO DTCO * Speed limiter setting for cruise control/accelerator pedal: 90 km/h * DAF Infotainment System: Integrated FM/DAB/DAB+ radio with USB and Bluetooth streaming functions * Combined antenna for AM/FM, GSM and GPS. GSM frequency bands 900 MHz, 1800 MHz and GPRS * ACC (Adaptive Cruise Control) with FCW (Forward Collision Warning) and AEBS-3 (Advanced Emergency Braking System) * Driver Performance Assistant (DPA) * Speed limit recognition * DAF Drowsiness Detection * Electronic Vehicle Stability Control (VSC) * Acoustic reverse warning system with override switch

Condition: ready for operation (used), HACO - ATLANTIC HPA 30-135 / Pressing force 135 tons - Pressing force: 135 tons - Bending length: 3050 mm - Clearance between uprights: 2550 mm - Complete upper beam / tooling and separate segments in various lengths - Two dies - Motorized height adjustment - Back gauge - manual - 2x front support / material support - Foot switch / hand switch Dimensions: LxWxH: 4x1.9x2.5 meters / Weight: 8500 kg Subject to errors and input mistakes Nedpsx Swg Eefx Ahzscl

Condition: ready for operation (used), Zeer compacte snij- en slitlijn Enkele eenheid bestaande uit: 1 - afwikkelaar 5 ton, maximale diameter van de spoel: 1000 mm 2 - richtmachine 3 + 4 rollen, 90 mm roldiameter 3 - schaar voor het op lengte knippen 4 - snij-eenheid met 5 snijmessen 5 - Operatorkast met CNC-besturing (frequentiegestuurd) Nsdpewwbfvefx Ahzscl

Condition: used, mileage: 95,811 km, power: 130 kW (176.75 HP), first registration: 01/2023, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, number of seats: 3, loading space volume: 36 m³, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 2,383 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, ATEGO 818 L Box Body 6.10 m with 1-ton Tail Lift. * Rear axle air suspension * Prepared for ZAA/AHK (towing hitch) * Vehicle ID for customer inquiries: 4560 * Euro VI engine spec, E * Active Brake Assist * Air conditioning * Centre seat with 3-point safety belt * Lane Keeping Assist * Environmental badge (green) * Tail lift * Light sensor * Rear axle air suspension * Rain sensor * Electronic Stability Program (ESP) * Trailer brake, 2-line system * 15-pin, 24 V trailer socket * Three-seater cab * Electronic braking system with ABS and ASR * Comfort driver's air-suspended seat * Electric windows on both sides * Gearbox G 90-6/6.70-0.73 * Mercedes PowerShift 3 * Central locking system Ncedpfox Tbq Dox Ahzsl * Exterior sun visor, transparent * Cruise control * 25-litre AdBlue tank * Roof hatch/ventilation flap * Main mirror, driver side, electrically operated * Electronic air supply heating unit * 120-litre plastic fuel tank, left side * Engine: OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm * Wheelbase: 4220 mm * ClassicSpace S-Cab, 2.30 m, tunnel type * Heavy-duty stabilizer, rear axle * Preparation for toll recording * Tubeless tyres, 215/75 R 17.5 front/rear * Digital tachograph, 2nd generation, ADR compliant * Preparation for tail lift control * Full service history No liability for printing/mistakes Sale to trade customers only Errors, changes, and prior sale excepted.* Changes, prior sale, and errors expressly reserved. Description serves to identify the vehicle and is not a warranty in the legal sense. The contract description is binding. * TOP SERVICE + QUALITY * We can provide LEASING, FINANCING, or HIRE PURCHASE offers on request * Warranty insurance available on request via insurer * TÜV / UVV LBW / tachograph test and OBU installation by our local partners * 30-day export license plates * All export documents available upon request and subject to individual inquiry * TOLL for Toll-Collect can be booked on site * Free shuttle service from Stuttgart Airport or Metzingen (Württ) Station * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * Over 200 vehicles always in stock

Condition: used, mileage: 96,811 km, power: 130 kW (176.75 HP), first registration: 03/2023, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space volume: 36 m³, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 2,383 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, * ATEGO 818 L box body 6.10 m with 1-ton tail lift * Air suspension rear axle * Pre-installation for trailer coupling * Vehicle no. for customer enquiries: 4558 * Engine spec Euro VI, E * Active Brake Assist * Air conditioning * Middle seat with 3-point safety belt * Lane Keeping Assist * Green environmental badge * Tail lift * Light sensor * Air suspension, rear axle * Rain sensor * Electronic Stability Program (ESP) * Trailer brake, 2-line system * Trailer socket 24 V, 15-pin * Three-seater Ncjdpex Tbqdefx Ahzsl * Electronic braking system with ABS and ASR * Driver's comfort air suspension seat * Electric windows, both sides * Transmission G 90-6/6.70-0.73 * Mercedes PowerShift 3 * Central locking system * External sun visor, transparent * Cruise control * AdBlue tank 25 l * Roof hatch/ventilation flap * Main mirror, electrically adjustable, driver's side * Heater, electronic compressed air supply unit * Plastic tank 120 l, left side * Engine OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm * Wheelbase 4220 mm * S-Cab ClassicSpace, 2.30 m, tunnel * Heavy-duty stabilizer, rear axle * Pre-installation for toll system * Tubeless tires, 215/75 R 17.5 front/rear axle * Digital tachograph, 2nd generation, ADR * Pre-installation control for tail lift * Full service history No liability for printing or typographical errors Sale to trade customers only Subject to error and prior sale. Changes, prior sale and errors expressly reserved. The description serves only for the identification of the vehicle and does not constitute a warranty under sales law. Only the specification stated in the purchase contract is binding. * TOP SERVICE & QUALITY * Leasing, financing, and hire-purchase offers available on request * Warranty insurance possible on request through insurer * TÜV / UVV tail lift / tachograph check and installation of OBU device can be organized through our local partners * 30-day export license plates available * All export documents possible upon individual request * Toll-Collect registration can be arranged on site * Free transfer from Stuttgart airport or Metzingen (Württ) train station * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit our website at * Constantly over 200 vehicles in stock

Condition: used, mileage: 93,811 km, power: 130 kW (176.75 HP), first registration: 01/2023, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, number of seats: 3, loading space volume: 36 m³, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 2,383 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, ATEGO 818 L Box Truck, 6.10 m, with 1 t tail lift * Air suspension on rear axle * Pre-installed for trailer coupling (ZAA-AHK) * Vehicle number for customer inquiries: 4559 * Engine type Euro VI, E * Active Brake Assist Ncedpfsx Tbp Tsx Ahzol * Air conditioning * Middle seat with 3-point seatbelt * Lane Keeping Assist * Environmental badge (green) * Tail lift * Light sensor * Air suspension, rear axle * Rain sensor * Stability Control Assistant (ESP) * Trailer brake, 2-line system * 24 V, 15-pin trailer socket * Three-seater * Electronic braking system with ABS and ASR * Comfort driver's suspension seat * Electric windows on both sides * Gearbox G 90-6/6.70-0.73 * Mercedes PowerShift 3 * Central locking system * Exterior sun visor, transparent * Cruise control * 25 l AdBlue tank * Roof hatch/ventilation flap * Main mirror, electric, driver's side * Electronic air supply unit for heating * 120 l plastic tank, left side * Engine OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm * Wheelbase 4,220 mm * S-Cab ClassicSpace, 2.30 m, tunnel * Heavy-duty stabilizer, rear axle * Pre-installation for toll collection * Tubeless tires, 215/75 R 17.5 front/rear * Digital tachograph, 2nd generation, ADR * Pre-installation for tail lift controls * Full service history No liability for printing or typographical errors Sale exclusively to businesses Mistakes and prior sale reserved. Changes, prior sale, and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a warranty in the legal sense. The details according to the purchase contract are binding. * TOP SERVICE + QUALITY * We can gladly provide you with a LEASING-FINANCING-HIRE PURCHASE offer Warranty insurance available on request from insurer * TÜV / UVV LBW / tachograph inspection and installation of OBU device can be arranged by our local partners * 30-day export license plate All export documents can be provided, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free shuttle from Stuttgart Airport or Metzingen railway station (Württ) * ARRIVAL STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles in stock at all times

Condition: used, mileage: 95,811 km, power: 130 kW (176.75 HP), first registration: 01/2023, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space volume: 36 m³, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 2,383 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, ATEGO 818 L box truck 6.10 m with 1 t tail lift * Air suspension on rear axle * Pre-installation for towing hitch (ZAA-AHK) * Vehicle number for customer inquiries: 4560 * Engine version Euro VI, E * Active Brake Assist * Air conditioning * Middle seat with 3-point seat belt * Lane Keeping Assist * Environmental badge (green) * Tail lift * Light sensor * Air suspension, rear axle * Rain sensor * Stability Control Assist (ESP) * Trailer brake, 2-line * 24 V, 15-pin trailer socket * Three-seater * Electronic braking system with ABS and ASR * Comfort driver's air-suspended seat * Power windows, both sides * Transmission G 90-6/6.70-0.73 * Mercedes PowerShift 3 * Central locking system * Exterior sun visor, transparent * Cruise control * AdBlue tank 25 l Ncodpfsx Tbqwox Ahzel * Roof hatch/ventilation flap * Main mirror, electric, driver's side * Heating, electronic compressed air supply unit * Plastic fuel tank 120 l, left side * Engine OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm * Wheelbase 4,220 mm * S cab ClassicSpace, 2.30 m, tunnel * Heavy-duty rear stabilizer * Pre-fitted for toll system * Tubeless tyres, 215/75 R 17.5 front/rear * Digital tachograph, 2nd generation, ADR compliant * Pre-fitted tail lift control * Full service history No liability for typographical or clerical errors Sale to businesses only Errors and prior sale excepted. Changes, prior sale, and errors expressly reserved. The description serves identification purposes only and does not constitute a warranty in terms of sales law. The specification in the purchase contract is binding. * TOP SERVICE + QUALITY * We are happy to provide a LEASING-FINANCING-HIRE PURCHASE offer * Warranty insurance available on request with insurance provider * TÜV / UVV LBW (tail lift inspection) / tachograph test and installation of OBU device by our local partners * Export license plates for 30 days * All export customs documents can be provided on request * Toll-Collect toll booking possible in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit our website at * Over 200 vehicles constantly in stock

Condition: used, mileage: 96,811 km, power: 130 kW (176.75 HP), first registration: 03/2023, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, number of seats: 3, loading space volume: 36 m³, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 2,383 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, * ATEGO 818 L box truck 6.10 m with tail lift, 1 t lifting capacity. * Air suspension on rear axle * Preparation for forced steering/AHK (trailer hitch) * Vehicle number for customer inquiries: 4558 * Engine type: Euro VI, E * Active Brake Assist * Air conditioning * Centre seat with 3-point safety belt * Lane Keeping Assist Nsdpfx Asx Tbqkohzocl * Environmental badge (green) * Tail lift * Light sensor * Air suspension, rear axle * Rain sensor * Electronic Stability Program (ESP) * Trailer brake, 2-line * Trailer socket 24 V, 15-pin * Three-seater * Electronic braking system with ABS and ASR * Driver comfort air-suspension seat * Electric windows, both sides * Transmission G 90-6/6.70-0.73 * Mercedes PowerShift 3 * Central locking system * Exterior sun visor, transparent * Cruise control * AdBlue tank 25 l * Roof hatch/ventilation flap * Main mirror, electrically operated, driver side * Heating, electronic air supply module * Plastic fuel tank 120 l, left side * Engine OM934, R4, 5.1 l, 130 kW (177 HP), 750 Nm * Wheelbase 4,220 mm * S-cab ClassicSpace, 2.30 m, tunnel * Stabilizer for heavy-duty applications, rear axle * Pre-disposal for toll collection system * Tubeless tires, 215/75 R 17.5 FA/RRA * Digital tachograph, 2nd generation, ADR * Pre-installation for tail lift control * Full service history No liability for printing or typographical errors. Sale to business customers only. Subject to prior sale and errors. Changes, prior sale, and errors expressly reserved. Description solely for vehicle identification and does not constitute a warranty in terms of sales law. The purchase contract description is decisive. * TOP SERVICE + QUALITY * We are happy to offer LEASING-FINANCING-INSTALLMENT PURCHASE * Guarantee insurance possible upon request from the insurer * TÜV / UVV LBW / tachograph testing and installation of OBU device by our local partners * 30-day temporary export license plates available * All export documentation possible on request * TOLL-Collect registration possible on site * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit our website at * Over 200 vehicles in stock at all times

Condition: used, mileage: 93,811 km, power: 130 kW (176.75 HP), first registration: 01/2023, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space volume: 36 m³, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 2,383 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, ATEGO 818 L Box Truck 6.10 m with Tail Lift 1 ton * Air suspension on rear axle * Preparation for ZAA-AHK (tow bar) * Vehicle number for customer inquiries: 4559 * Engine: Euro VI, E specification * Active Brake Assist * Air conditioning * Center seat with 3-point seatbelt * Lane Keeping Assist * Environmental badge (green) * Tail lift * Light sensor * Air suspension, rear axle * Rain sensor * Electronic Stability Program (ESP) * Trailer brake, 2-line system Njdsx Tbqqepfx Ahzjcl * Trailer socket 24 V, 15-pin * Three-seater cab * Electronic braking system with ABS and ASR * Driver’s comfort air-suspension seat * Electric windows, both sides * Transmission G 90-6 / 6.70-0.73 * Mercedes PowerShift 3 * Central locking system * External sun visor, transparent * Cruise control * AdBlue tank 25 l * Roof hatch / roof vent * Main mirror, electric adjustment on driver’s side * Heater, electronic compressed air supply unit * Plastic fuel tank 120 l, left side * Engine OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm * Wheelbase 4220 mm * S-cab ClassicSpace, 2.30 m, tunnel * Heavy-duty stabilizer, rear axle * Pre-installation for toll collection system * Tubeless tires, 215/75 R 17.5 VA/VLA * Digital tachograph, 2nd generation, ADR * Pre-installation for tail lift control * Service history maintained No liability for typographical errors. Sale only to commercial customers. Subject to error and prior sale. Changes, prior sale and errors expressly reserved. The description serves solely for vehicle identification and does not constitute any legal warranty. The description in the sales contract is binding. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING-FINANCING-INSTALLMENT PURCHASE offer * Warranty insurance available upon request with the insurer * TÜV / UVV LBW / tachograph test and OBU device installation available via our local partners * Export license plates for 30 days * All export customs documents available upon request (must be requested individually) * Toll-Collect toll booking available in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) Train Station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles in stock at all times

Condition: excellent (used), functionality: fully functional, Dispenser/Dosing Unit made of stainless steel Overall dimensions: 1600 x 600 x 1900 mm Included equipment: 4 pneumatic dosing heads Height-adjustable base Njdpeycl Iwjfx Ahzecl The dosing unit is designed for precise dispensing of products in production processes. Equipped with four pneumatic dosing heads, it enables simultaneous portioning of several product streams, significantly increasing the efficiency and repeatability of dosing operations in processing lines. The device is mounted on a height-adjustable base, facilitating adaptation to various types of workplaces and integration with other machines in packaging or filling processes. The pneumatic dispensers operate using air pressure, allowing for precise and hygienic dosing of products with different consistencies, commonly used in the food, cosmetic, or chemical industries.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Turbo D252P Dispenser/Dosing Machine with 2 Cups Brand: Turbo Model: D252P Year of manufacture: 2014 Dimensions: 650 × 950 × 1350 mm Included equipment: Nsdpfxjycl E No Ahzecl Various accessories and spare parts Machine mounted on and supplied with 3 transport trolleys The Turbo D252P stainless steel dosing machine with two dispensing cups is a versatile device designed for precise filling and portioning of liquid or semi-liquid products in an industrial environment. The two dosing cups allow simultaneous handling of more portions, increasing production efficiency. The machine comes with additional accessories and practical transport trolleys, making relocation and workplace organization within the facility easier.

Condition: excellent (used), mileage: 320,256 km, power: 130 kW (176.75 HP), first registration: 10/2006, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 8,500 mm, total width: 2,580 mm, total height: 3,810 mm, loading space length: 6,550 mm, loading space width: 2,270 mm, loading space height: 2,630 mm, Year of construction: 2006, Equipment: air conditioning, tail-lift, BELGIAN TRUCK EXCELLENT CONDITION = Further Information = Technical Information Engine displacement: 4,250 cc Front axle: Steered; Suspension: leaf spring Rear axle: Twin wheels; Suspension: air suspension Weights Kerb weight: 7,160 kg Payload: 4,830 kg Gross vehicle weight: 11,990 kg Functional Tail lift: SOLID LIFT, rear door Condition Technical condition: very good Visual condition: very good Further Information Contact Thierry Leemans for more information. Ncodpfx Aoxvif Sohzsl

Condition: ready for operation (used), functionality: fully functional, Press line for manufacturing can ends (tops and/or bottoms) Comprising: - Bliss 1831 double die press - Bliss double curler - IMC / Grace compound liner Nedpfox Ezuyox Ahzjcl - Drying oven - Production capacity: up to 600 ends per minute

Condition: excellent (used), Year of construction: 2003, Technical Data: Working length: 4230 mm Distance between uprights: 3650 mm Press force: 170 tons CNC control: AMADA Operator III graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motorized adjustable backgauge Stroke: 400 mm Automatic crowning Working height: 960 mm Motor power: 16.5 kW Ncjdpfx Ahex N H Hcezel CE marking Dimensions (L x W x H): approx. 4700 x 2200 x 2900 mm Weight: approx. 14.8 tons Accessories: Automatic measurement of the bending angle of the workpiece with automatic correction in the control unit Side-mounted movable safety guards LAN network operation Infrared light barrier at the front and rear Condition: Very good condition, only 9,000 operating hours The seller accepts no liability for typographical or data transmission errors. The machine's visual, technical, and wear condition corresponds to its age; used machines are sold without any warranty.

Condition: excellent (used), Technical data: Working length: 4100 mm Frame width: 3650 mm Press force: 220 t CNC Control: OPERATOR OPII graphic Color monitor size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Njdjx N Hw Ispfx Ahzocl Motorized adjustable back gauge Throat depth: 300 mm Stroke: 180 mm Automatic crowning Motor power: 17 kW Dimensions (L x W x H): approx. 4800 x 2300 x 2900 mm Weight: approx. 17 tons Accessories: New AMADA tools The seller assumes no liability for typographical or transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2009, Technical Data: Working length: 3230 mm Distance between uprights: 2690 mm Pressing force: 230 tons CNC control: TASC 6000 Number of controlled axes: Stroke: 445 mm Throat depth: 420 mm Table width: 140 mm Working height: 1065 mm Crowning: CNC-controlled Hydraulic tool clamping Die shifting CE marking Motor power: 30 kW Dimensions (L x W x H): approx. 4150 x 2350 x 3100 mm Weight: approx. 17 tons Accessories: 2 pcs. bending aids Electronic pressure gauge Measuring system with centrally mounted glass scales and temperature compensation Safety device BendGuard Network capability Support arm with height adjustment Condition: Overall in very good condition Little used, 35,000 hours The seller is not liable for typographical or data transmission errors. The machine is visually, technically, and regarding wear in accordance with its age; used machines are sold without any warranty. Nedpfxsxdt U Hj Ahzecl

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm 2 bending aids Angle measuring system Motor power: 30 kW Laser monitoring Table height: 980 mm Nodpfx Aoxdt Umehzecl Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Accessories: Manual tool changer Segmented bending with step-by-step support of the bending aids (segment bending) 1 set of tools Condition: Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2013, Technical Data: Ncedow Tdcbopfx Ahzol Working length: 3050 mm Distance between uprights: 2550 mm Pressing force: 130 tons CNC control: EHT EPC-D01-3D graphic controller 2D and 3D programming Touchscreen 17" LCD color display EHT angle measuring system Controlled axes: Y1/Y2; X1/X2; R; Z1/Z2 Stroke: 400 mm Throat depth: 405 mm Installation height: 595 mm Table width: 110 mm Working height: 1065 mm Crowning: CNC-controlled Safety device: PILZ PSENvip 440 Camera-based system 2 support arms with T-slot Hydraulic tool clamping top and bottom CE marking Motor power: 15 kW Dimensions (L x W x H): approx. 4150 x 1950 x 3200 mm Weight: approx. 11 tons Accessories: Control cabinet air-conditioning unit Various tools The seller is not liable for typographical or data transmission errors. Machine condition regarding appearance, technology, and wear corresponds to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1999, Technical Data: Working length: 3050 mm Distance between uprights: 2690 mm Pressing force: 130 t CNC control: DELEM Adjustable backgauge Controlled axes: Z1 / Z2; X; R CNC-controlled crowning Installation height: 535 mm Stroke: 365 mm Throat depth: 410 mm Hydraulic tool clamping top and bottom Ram position measuring system with spring-back compensation via glass scales Program-controlled lower tool shifting (I-axis) for 2 positions Motor power: 12.5 kW Number of backgauge fingers: 2 Njdpfjw Tcncox Ahzscl CE mark Dimensions (L x W x H): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tonnes Condition: Good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition and wear correspond to its age; used machines are sold without any warranty.