Used Tos Fnk 25 for sale (15,932)

Year of construction: 1986, condition: excellent (used), machine/vehicle number: 12024, table mounting size: 290 x 1250 mm table movement x: 800 mm table movement y: 360 mm Kdjdef Tc R Uopfx Addsg table movement z: 450 mm milling head swivelling by: 90/45 ° spindle taper: ISA 40 spindle turning taper: 56 - 4500 rpm tailstock stroke: 125 mm tailstock carriages: 0,035; 0,14; 0,7 mm/min spindle drive: 1,8/2,4 kW space needed: 2000 x 1900 x 2300 mm weight: 1700 kg

Condition: good (used), functionality: fully functional, Table dimensions 1250 × 290 mm, 800 mm X travel 370 mm Y travel 450 mm Z travel Kdjdpfx Asx E Atkeddsg automatic feed on drilling quill, 3 settings: 0.035 / 0.070 / 0.140 automatic feed and rapid traverse on X and Y axes electric rapid traverse on Z axis Spindle ISO 40 with speed range 56–4500 rpm, table load capacity up to 200–500 kg, Machine dimensions: 1.90 m (length) × 1.70 m (depth) × approx. 2.3 m (height) machine weight approx. 1.7 tons. year of manufacture: 1986 Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or a contract and we recommend you verify all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for businesses).

Condition: new, New bellows (Führungsbahnabdechkungen) for tool milling machines produced by TOS / INTOS Zebrak. For enquiries, please indicate the exact type of machine. More parts available. Kdjdpfsdx Rfvjx Addsg

Condition: good (used), functionality: fully functional, BUA 25/1000 Kodpfx Aowug A Isddedg

Year of construction: 1980, condition: used, turning diameter over bed 655 mm turning diameter over slide rest 390 mm Kdedpfx Adjlc Uk Ijdeg turning length 1250 mm spindle bore 82 mm spindle turning speed range 9-1120 U/min feeds 0,049-3 mm/U total power requirement 12 kW weight of the machine ca. 5,2 t required space 3,5 x 1,9 x 1,7 m m

Condition: good (used), Universal milling head, milling chuck, milling extension, angle milling head, universal angle milling head, milling angle head -Manufacturer: TOS, Universal milling angle head from TOS FB25-V milling machine Kdodpfx Adegxqt Aedsg -Recording output: SK50 -Recording: Input gear -Milling head: fully swivelling -Stroke: 55 mm -Recess recording: mm -Bolt circle: mm -Transport dimensions: 780/490/H430 mm -Weight: 224 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: TOS, three-jaw chuck chuck size Ø 125 mm -Passage: Ø 35 mm -Bolt circle: Ø 108 mm -Accessories: incl. 2nd set of interchangeable jaws Kodswucf Sspfx Addodg -Dimensions: Ø125 x 70 mm -Weight: 4.1 kg

Condition: good (used), Dividing head, dividing head, rotary table, rotating table Kedpfxodc R N Tj Addodg -with translation: 1:40 -Indoor recording: MK4 -Peak height: mm -Passage: Ø 32 mm -Dividing head: swiveling -Dimensions: 430/430/H280 mm -Weight: 83 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 135 mm -Recording: MK2 -Drawing with the photos -Price: per piece Kdjdpjb Hbx Nofx Addjg -Number: 2 pieces -Dimensions: 200/75/H145 mm -Weight: 5 kg

Condition: used, Year of construction: 1987, Technical details: max. pitch circle diameter: 360/24 mm weight of the machine approx.: 46 kg centre height: 130 mm swivable: ja ° Kjdpou Nlg Tjfx Addjdg rotation movement: 360 Grad dimensions: 350 x 450 x 260 mm Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving scale; through hole Ø 17mm; without jaws -base plate: size 260 x 300mm, with 2 clamping grooves WxL: 15 x 21mm - chuck key - 2 pieces groove stone *

Condition: used, Year of construction: 1983, Min./max. diameter of ground bore: 10-250 mm Max. grinding length: 500 mm Max. swing diameter: 400 mm Max. workpiece length: 1,000 mm Workhead spindle speed: 25-450 rpm Grinding spindle speed: 8,800-31,000 rpm Kedpfx Ajx Alalsddodg Workhead swiveling range: 15° Total power requirement: 9 kVA Machine length x width: 4,400 x 2,020 mm Total machine weight: 4,400 kg

Year of construction: 2009, condition: reconditioned (used), 4-SIDED 5-HEAD PLANER TOS SVITAVA LIGNUM 4-SIDED 5-HEAD PLANER TOS SVITAVA LIGNUM 5-HEAD PLANER 240 MM WITH A GROOVED TABLE AFTER A COMPLETE RENOVATION FWH 225mm 23kW total power Kdjdendcg Nspfx Addeg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: C210068/9002194, grinding length: 750 mm, grinding wheel diameter: 400 mm, total width: 2,750 mm, total length: 1,950 mm, total height: 1,750 mm, grinding diameter: 250 mm, Machine complete with filter unit and documentation. Grinding diameter (maximum workpiece Ø): 250 mm. Centre distance / maximum grinding length: 750 mm. Grinding wheel (max. size): 400 × 40 × 127 mm. Grinding spindle motor power: 5 kW. Grinding wheel speeds: approx. 2140 / 2640 rpm. Workpiece mounting: between centres, tailstock; suitable for external cylindrical grinding. Dimensions (L / W / H, approx.): 2750 mm / 1950 mm / 1750 mm. Machine weight: approx. 3.9 t (≈ 3900 kg). Kdsdpfxsxz Tvxs Addog

Condition: excellent (used), functionality: fully functional, I am selling this machine, connected and can be tested. Can send a video of the machine via whatsapp. Ksdpfxev Nw D Ho Addodg Swing diameter over bed: 1250 mm Swing diameter over slide: 940 mm Center distance: 5000 mm Spindle bore: 102 mm

Condition: ready for operation (used), Year of construction: 2005, functionality: limited functionality, spindle speed (min.): 31,000 rpm, Equipment: rotational speed infinitely variable, We are offering for sale, due to a trade-in, a TOS BDU 250 A internal cylindrical grinding machine with the following specifications: Grinding diameter: 250 mm Maximum longitudinal table travel: 600 mm Maximum internal diameter: 250 mm Smallest diameter: 10 mm Workpiece spindle speed: 25; 45; 80; 140; 250; 450 rpm Internal grinding spindle mount: Currently Ø 100 mm Maximum diameter without chuck guard: 470 mm Adjustment of grinding headstock: 15° and 90°, mounted on an oscillating longitudinal table. Kdsdpfxsw Rllxe Addjg Equipment: - Coolant tank - Hydraulic unit - Used internal grinding spindle - Machine lamp - Documentation and operating manual Machine information: Machine fault (transformer faulty, automatic operation possible only without dressing device).

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill Kdodpfxsv Hzqxe Addsg 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,500 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, torque: 1,200 Nm, controller manufacturer: HEIDENHAIN TNC 530, workpiece diameter (max.): 3,000 mm, workpiece weight (max.): 60,000 kg, total height: 5,560 mm, total length: 11,550 mm, total width: 10,750 mm, table width: 3,000 mm, table height: 800 mm, table length: 3,000 mm, table load: 60,000 kg, rotary table diameter: 3,000 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 2,500 rpm, overall weight: 87,000 kg, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer a used FUE 125 W/4 milling and boring machine, manufactured in 2011, equipped with the HEIDENHAIN iTNC 530 HSCI control system and HR410 handwheel, HEIDENHAIN digital drives, standard design, metric version, AC 3PE˜50Hz, 400V connection. Travel ranges: • X-axis (longitudinal): 4,000 mm • Y-axis (cross): 1,250 mm • W-axis (spindle extension): 800 mm, spindle diameter 130 mm • Z-axis (vertical): 2,500 mm • Rapid traverse X1: 20,000 mm/min • Rapid traverse Y, Z1: 10,000 mm/min Machine specifications: • Metric version: Yes • Spindle head design: Extendable working spindle (W axis) + 3 automatically exchangeable accessory heads • Tool clamping: ISO 50 • Power: 28 kW • Spindle taper: ISO 50, DIN 69 871 clamping • Automatic accessory head IPS with automatic spindle positioning for H/V orientation, 2,500 rpm / 1,200 Nm • Automatic accessory head IZN1 for turning, CAPTO 6 clamping • Automatic accessory head IZN2 for turning, CAPTO 6 clamping Control and accessories: • HEIDENHAIN iTNC 530 HSCI • HEIDENHAIN HR 410 wired handwheel Kdodpfxsxp U U So Addsg • Cooling unit for spindle head thermal stabilization • High-pressure through-spindle cooling: 20 bar / 30 l/min / 180 l • External low-pressure cooling: 5 bar / 60 l/min / 1,200 l Clamping area in front of the machine: Optional Currently equipped with a rotary traversing table (KES) with carousel function (option: configurable as plate or table) • Dimensions: 3,000 x 3,000 mm, V (Y) axis = 1,500 mm • Load capacity: 60,000 kg (hydrostatic) • Speed range: 1 - 80 rpm • T-slot dimension (base clamping plate): 28 H11, central 28 H8 • T-slot pitch and count: 200 mm, 15 slots • Centering hole: 100 H7 • Rotational axis drives: MASTER-SLAVE, 2x SIEMENS motor • Additional carousel plate, diameter 3,000 mm, 8-way star-shaped slot configuration For further options and accessories or to arrange an inspection, please contact us.

Condition: used, Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Finger milling cutter: indexable insert end mill with internal cooling, 2 pieces -Receptacle: Ø 25 mm -Diameter: 25 and 30 mm -Levy/Price: complete -Transport dimensions: 210/70/H40 mm -Weight: 1.0kg Kdodpfx Adjrk S Dxedjg

Condition: excellent (used), Year of construction: 2016, operating hours: 15,000 h, functionality: fully functional, Working range Maximum turning diameter 1400 mm Maximum workpiece diameter 1400 mm Maximum height of workpiece 1400 mm Maximum workpiece weight 8000 kg Table Table diameter 1250 mm Main motor power output 44 kW Infinitely variable speed range in Turning mode 2 – 400 rpm Max. torque on the table in Turning mode; S1/100% 14510 Nm Kedpfxex U D Hks Addsdg Rotating table feed in Milling mode 0,01 7,4 rpm Max. torque on the table in Milling mode; S1/60% 6500 Nm Travels Rail-head working travel (X-axis) left / right from table centre -80 / +1100 mm Ram working stroke (Z axis) 1060 mm Ram section 200 x 240 mm Max. cutting force on the rail head 45000 N Vertical travel of cross rail (in steps 100 mm) (9 steps) 800 mm Live Spindle Speed range 4-3000 rpm Maximum power output Siemens 22 kW Torque max. 840 Nm

Condition: excellent (used), Year of construction: 2021, Toshiba ES-2515AC This is a Toshiba ES-2515AC photocopier in very good condition, offering high copy quality and showing low usage on the counter. Counter: 71,000 total copies (including 22,000 black & white, and 19,000 + 30,000 low-volume colour copies) Options: PCL / PS / Finisher / Scanner / High Capacity / Paper feed unit with 2 cassettes Kjdotxnkgepfx Addsdg Technical data: Power supply: 220-240V, 50-60Hz CM SOLUTIONS is today one of the leading French and European companies in the purchase, sale, and refurbishment of used office equipment. By integrating transparency, expertise, and ethics at every level of our operations, we offer our clients high-performance products at competitive prices. Why do our clients choose CM Solutions? - 28 years of international experience in more than 50 countries - 20 machine brands: Ricoh, Kyocera, Xerox, Toshiba, Canon, Konica Minolta, and more - A large stock of 2,000 copiers available immediately - A team of qualified technicians Please feel free to contact us for further information.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 0200233/71 08863, Measurements width: 4000 mm Measurements depth: 2800 mm Measurements height: 2200 mm Machine weight: 3200 kg Workpiece weight: 250 kg Kdsdowvigfopfx Addog Control unit brand: SIEMENS Model: Simatic OP17

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 220 mm, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 220 mm, center height: 200 mm, turning length: 1,000 mm, TOS SN 40B Gap Bed Lathe Model: SN 40B Swing over Bed: 400mm Swing over Saddle: 220mm Kdsdpfx Adjxxyy Sodsg Swing in Gap: 600mm Distance Between Centres: 1000mm Spindle Speeds: 22 – 2000 RPM Spindle Bore: 50.8mm Motor: 5.5 KW Machine with: 3 jaw chuck 4 jaw chuck Quick Change Toolpost Fixed Steady

Condition: used, turning diameter 320 mm turning length 800 mm swing diameter over bed slide 180 mm Kodpfx Adex Tu I Asdsdg turning speeds 20 - 3200 U/min spindle bore 36 mm quill travel 160 mm quill: MK 3 machine weight ab. 1200 kg range L-W-H 2000 x 950 x 1600 mm Equipment: - 3-jaw chuck FORKARDT Ã?160 mm - MULTI-FIX quick-change holder with inserts - Coolant device - Lathe chuck guard - Change wheels - Chip back panel - Machine light

Condition: used, Year of construction: 1988, control Heidenhain 355 tool adaptor SK50 weight of the machine ca. 8 t Kodpfxef Tdvbs Addedg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1997, Control Heidenhain 355 x-travel 850 mm y-travel 550 mm z-travel 450 mm tool taper SK50 weight of the machine ca. 5,5 t +++++ Kdodpod N Smhjfx Addeg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++