Used Tripan Tool Holders for sale (39,169)

Condition: used, Year of construction: 2012, We are offering this used WK WK-TNV tool holder, year of manufacture 2012. Type: WK-TNV Year of manufacture: 2012 System number: 1309 Exhaust air volume (at inlet): 36,000 m³/h Maximum permissible combustion chamber temperature: 780 °C Burner type: WK-KAT-025-00/0 Burner output: 650 kW Fan output: 200 kW Fan pressure: 3,500 Pa Air preheater efficiency: % Maximum permissible inlet temperature: 230 °C Maximum permissible solvent throughput: 500 kg/h Tsdpfsx Igudox Am Tja Heating medium: NATURAL GAS Calorific value of heating medium: 32,900 kJ/m³ Maximum heating medium consumption: 749 m³/h If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), For sale: chucks from well-known manufacturers. VDI50 DIN1809 shank (fin type). The price listed is per unit. All details are shown in the pictures. Shipping costs will be calculated separately, depending on the number of chucks ordered. Please feel free to contact us. Todpfx Amozd Rpzj Tsa

Condition: good (used), Various quick-change tool holders, total of 42 pcs: 7 pcs WDL 4/50 16 pcs WDR 4/40 10 pcs WDL 4/40 3 pcs WB 4/60⌀ Tjdpfx Amsy N S Ife Tja 3 pcs WBW 4/60⌀ 1 pc WBW 23/60⌀ 2 pcs without type Please let us know which items you are interested in so that we can provide you with an offer.

Condition: good (used), 16 tool holders of this size. €50 each Sale only within EU member states! Todeyzd H Repfx Am Tea No private sale. Any warranty rights are excluded. We do not accept any liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and equipment, nor for compliance with any safety or environmental protection requirements mentioned in accident prevention regulations.

Condition: used, Approx. 80 tool holders of this size. €30 each Tjdpfx Aeyzdn Uem Toa Sale only within EU member states! No private sale Any warranty rights are excluded. We do not assume any liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with any safety and environmental protection requirements specified in accident prevention regulations.

Condition: excellent (used), For sale is a lot of Sandvik brand side and face milling cutters and tool holders. Also included are roughing and finishing cutters. Scope of delivery as shown in the pictures. Side and face milling cutters in various sizes up to 300 mm diameter. Sandvik tool holders are included. Among others, the following types: 391.01-50 50 060, 391.10-27, 391.10.63.63.080, 391.42, 391.20. Tjdpjyrnqtsfx Am Tea

Condition: good (used), functionality: fully functional, Various Erowa tool holders / tool holders are for sale. All holders are functional and tested by us. Can be purchased individually or as a package 1: ER-020571 2: ER-016841 3: ER-016841 Tjdpfxotwz N Tj Am Tja 4: ER-016841 5: ER-016841 6: ER-016841 7: ER-016917 Loading and shipping throughout Europe can be organized on request. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Dndpw7 For further information or contact options, please visit our website

Condition: good (used), We offer here a used UPC chuck with airdock ER-139501 / ER-078728. Additionally with an adapter pallet compatible with ER-115304 for use on milling, grinding, measuring, drilling and die-sinking EDM machines. The chuck has been cleaned and relubricated by us and is in very good technical condition. Please do not hesitate to contact us if you have any questions. Tsdpfjviul Iex Am Tea

Condition: new, New tool holders for the FAT Wrocław TUR-50, TUR-560, TUR-63, TUR-630, TUR-710, and TUD 40/50 lathes. Spare parts for 4-way tool holders and many other mechanical parts and electromagnetic clutches for metalworking machines are also available for sale. The largest selection in Europe. We ship our parts worldwide. Tedjwak Dtepfx Am Tea

Condition: used, Tool holders SK 50 Tedpob E Evqofx Am Tsa DIN 69871 and DIN 2080

Condition: used, Drill chucks Screwing chucks with adjustment for bolt dies Collet chuck ER 25 Collet chuck ER 32 Collet chucks OZ 2-16 adjustable MK1 MK2 MK3 MK4 MK2 adjustable E1 12 E1 16 E1 20 E1 25 E1 32 E1 40 E2 6 E2 10 E2 12 E2 16 E2 20 E2 25 E2 40 B2 B3 B7 Tool setter C1 C2 C3 Boring tool Capto C3 straight Todpfx Asdbmxzjm Tsa Capto C3 tilted

Condition: used, Tool holders VDI 60 Todjx Em Ncjpfx Am Tja

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm Tsdey Nd Siepfx Am Tea spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: used, Used temperature control unit Tsdpfsuuacfox Am Tja Item number: 10636 Make Tool-Temp Up to 90°C Total height 720mm Overall length 730mm Total width 300mm

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B/BP, used machine Manufacturer: Tool-Temp Type: TT 138 B/BP Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Tsdpfx Amszqbmds Tea Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: used, Manufacturer: TOOL TEMP Tsdpfx Aoylaatsm Tja

Year of construction: 2025, condition: new, functionality: fully functional, Type: TT-108’000 Year: 2025 Operating hours: 0 h (Machine is brand new) For sale due to an incorrect purchase. Tsdpfxszhpdlj Am Tsa Ready for immediate delivery.

Condition: excellent (used), For sale, Form thermostat - Tool Temp TT-188 Max. heating temperature - 90°C Medium - water Tedpfx Amevzb Nqe Toa Power: 9850 Watts The device has: - vacuum pump vaccum - vacuum tank - function of sucking the medium out of the mold - the device can be integrated with the machine, maintenance-free

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Location Gorzow Wielkopolski. Tedecw Dg Dopfx Am Tsa Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Tool-temp TT-137 Tool Tempering Unit, 2018, heating: 12 kW, temperature: 140°C Stock: 3 units Tedpszab S Hofx Am Tja

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Tedpfoy Uddpex Am Tsa Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: Tedpfxjx Emfke Am Tja 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Tedpfsy Uddcjx Am Tsa Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Year: 2012 Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Todjx Emd Tepfx Am Tea Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: used, diameter div. Tjdsww Nb Espfx Am Toa number 36x tool adaptor BT 40