Used Trunion Table for sale (44,832)

Year of construction: 1991, condition: used, table load 3000 kg swivelling range 360 Grad vertical motion range 1380 mm stroke speed 1900 mm/min 360 ° total power requirement 4 kW weight of the machine ca. 5400 kg dimensions of the machine ca. 3800 x 3700 x 4200 mm Clamping plate distance: 2800 mm Cjdpfxovuz N Dj Adaori Support arm rotation angle: 360° - Operating instructions

Condition: used, Year of construction: 2004, Note: Screen is defective. Both saws can be operated from the screen. Crsdpfxexruqlo Adaji The other axes do not respond (height, rear tilting fence). - Year: 2004 - Documentation available: No - CE marking present: Yes - Serial number: AB/167923 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Used Bode - T-slot clamping table Crjdpfoxqpf Uex Adaji Length x Width x Height = 6500 x 1500 x 300 mm The table has a small damage at the end (see photos)

Condition: used, Accessory for table milling machine AIGNER Integral fence - used - left section 500 mm long, right section 650 mm long Cjdpfx Aoxuafgedajri

Condition: used, SincoTec Model: POWER SWING 100 MOT Big Table The SincoTec POWER SWING 100 MOT is a high-performance resonance test bench designed for fatigue testing of materials and components. This system enables dynamic load testing with high forces (up to ±100 kN) while ensuring precise control. Typical applications include lifetime testing, fatigue strength testing, and component validation under realistic conditions. With its robust construction, precise sensors, and stable granite table, the test bench is ideally suited for research, development, and quality control in both industrial and academic settings. Csdpsxrlkvefx Adajri Notes: The resonance test bench is particularly well-suited for material and component testing under dynamic loads. Technical Data: General Data – Test Bench: - Overall height: 1215 mm (without clamping fixture) - Width: 2005 mm - Depth: 1205 mm - Maximum force amplitude: 50 kN - Maximum total force: ±100 kN - Sensor accuracy: at least class 1 (according to DIN EN 10002-3) Control Cabinet: - Overall height: approx. 1800 mm - Table height: 1080 mm - Width: 650 mm (narrow tabletop) / 1420 mm (wide tabletop) - Depth: 700 mm - Weight: 180 kg (with granite tabletop approx. 240 kg) - Color: RAL 9006 (white aluminum), tabletop midnight Installation Requirements: - Required space: 4.3 × 3.0 m - Minimum ceiling height: 2.5 m - Floor load capacity: 2.0 t/m² - Power supply: 400 V / 50 Hz (three-phase, clockwise rotation) - Connection: 5-pin CEE socket, 16 A - Fuse protection: 16 A - Weight: approx. 3.6 t Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data; all information provided without guarantee!) If you have any further questions, please do not hesitate to contact us by phone.

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, empty load weight: 45,000 kg, total length: 11,055 mm, total width: 6,320 mm, total height: 4,140 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! MA-25 2-assige universele freeskop - 20 kW - 6000 tpm C-bereik: 0-360° Bereik A-as: +/- 110° Koeling door spindel 40 bar Totaal vermogen: 67 kW Geen fundering nodig! De Johnford DMC-serie dubbelkoloms brugfrees met bewegende tafel is gemaakt van een eendelige Meehanite gietijzeren brug/kolomconstructie die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met een C-frame. De brugfrees is verkrijgbaar in versies met zowel een bewegende tafel als een schuifkolom (vaste tafel), variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De brugfreesmachines hebben een lange basis met volledige ondersteuning van de tafel over de volledige 130 cm Y-asverplaatsing, waardoor zware lasten kunnen worden bewerkt. Crodpfxoxp Sk Ds Adasi De Y- en Z-as dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt, wat zorgt voor een nauwkeurige bewerking met nauwe toleranties tijdens bewerkingen met hoge snelheid. Omdat er geen tafeloverhang is, worden de helling en gierhoek van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat zorgt voor extra stijfheid. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange standtijd en een optimale oppervlakteafwerking. De combinatie van dubbele schroeftransporteurs en een rupsband zorgt voor volledige spaanafvoer met minimale handmatige reiniging. Daarnaast wordt eindige-elementenanalyse (FEA) gebruikt bij het ontwerpen van elke brugfrees, waarbij de effecten van realistische omstandigheden, zoals trillingen, hitte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm

Condition: used, Year of construction: 2021, functionality: fully functional, Bespoke Hot Table, we built to cast hot polyurethane components, we were holding tool temps at 110 degrees to cast the parts. So perfect for molding casting or curing. Also with close down sides to protect the bed when not in use. Heat Transfer Oil S2 machined Aluminum table with oil ways for circulation we found to be much more efficient than electric. Using a Tool Temp TT-181 reconfigured for oil usage - directly by Tool Temp temperature 0-150 degrees ( we have never tried higher) Circulation cut off valve for flow and return Heat Pipes changed before decommissioning Spare pump connectors provided Being sold as the department has closed and the machine is no longer required. Sizes Heated Bed 600mm wide x 1800mm long x 60mm thick Bed Height 930mm Table sizes 660mm Width 1860mm total length Closed Height 970mm Full working condition - Crsdpfx Aexpxmxjdasi Ex works Aylesbury Buckinghamshire England, we can export at a additional cost. Can be seen working

Condition: used, total length: 2,700 mm, total width: 2,220 mm, total height: 1,500 mm, Weight: 900 kg - Documentation available: No - Serial number: V024400 - Main motor power [kW]: 5.5 - Roller table length [mm]: 2500 - Table width [mm]: 1940 - Max. saw blade diameter [mm]: 350 - Dust extraction nozzle diameter [mm]: 140 Crjdownh S Dspfx Adaei - Options: Scoring unit - Schuinstelbare zaagaggregaat: - └ Max. adjustable [°]: 45 - Transport dimensions: 2700mm x 2220mm x 1500mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, new machine - made in Switzerland 24 months of warranty on parts Advantages: + robust, compact table dough sheeter + Operation with push buttons + Suitable for all types of dough for rolling out and touring + Stainless steel tables can be folded up on the left and right + Scrapers can be easily removed without tools + Quick supply of spare parts within 1-2 working days Technical specifications: - Belt width: 605 mm - Roller width: 633 mm - Table length: 2420 mm - Roller adjustment: from 0.5 mm to 30 mm (depending on the product) - Speed: approx. 50 cm/sec - Motor power: 1 kW - Connection: 400 V - 3Ph - 50Hz - Protection: 16A CEE plug - Dimensions: --- Working position: 2420 x 1072 x 535 mm (WxDxH) --- Rest position: 1220 x 1072 x 1100 mm (WxDxH) - Net weight: 110 kg optionally possible at extra charge: Crjdpoivdi Refx Adaoi - Machine equipped with original RONDO synthetic belts (to roll dough & marzipan or fondant) + €619 net The exchange of belts may extend the delivery time!

Condition: used, Year of construction: 1999, Under-table crosscut saw Quick Stop 160S - Year of manufacture: 1999 - Pneumatic-hydraulic, NC and CNC controlled - With waste optimization - Dimensions: depth 800 mm, width 3000 mm; usable length 1800 mm - 7.5 kW motor Crsdpfxoxuk Npo Adasi - Control cabinet: 400 x 1200 x 600 mm - Weight: 90 kg - Connected load: 12 kW, 25A - Operating pressure: 6 bar, extraction with 2 ports 120 mm Ø Machine will remain in operation until week 48.

Condition: used, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer Service Performed General Information: For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance carried out regularly by the manufacturer. Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance included - Ideal for research, testing, and development applications Technical Data – Test Bench Feature / Value - Overall height of test bench: 1215 mm (without clamping device) - Width of test bench: 2005 mm - Depth of test bench: 1205 mm - Maximum force amplitude: 10 kN - Maximum total force: ±20 kN - Measurement transducer accuracy: min. Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Feature / Value - Overall height of control cabinet: approx. 1800 mm - Table top height: 1080 mm - Width of control cabinet: 650 mm (narrow table top) / 1450 mm (wide table top) - Depth of control cabinet: 700 mm (narrow table top) / 800 mm (wide table top) - Weight: 152 kg (small table top) 187 kg (large table top); with granite plate: 247 kg Site Requirements Feature / Value - Required space: 4.3 × 3.0 m - Required ceiling height: 2.5 m - Floor load capacity: 234 N/cm² Power Requirements Feature / Value - Voltage: 400 V three-phase AC with neutral and protective earth - Phase rotation: clockwise sequence - Voltage fluctuation: ≤ ±10 % - Short voltage dips: < 20 ms - Limits for continuous interference: interference class A according to VDE 0871 Crodjxrffaepfx Adaji - Frequency: 50 Hz ± 1 % - Protective earth / ground resistance: < 0.3 Ω Connection and Fusing Feature / Value - Power supply: 400 V / 50 Hz (clockwise phase sequence) - Connector: CEE plug, 5-pin, 16 A - Fuse rating: 16 A Test bench weight: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical specifications!) Further questions can be answered by phone.

Condition: good (used), Bohner BGM 80 A Bakplaat Multifunctioneel gebruik voor bakken, koken en sudderen Deze multigrill heeft een speciaal grilloppervlak waarmee u allerlei gerechten direct op de bakplaat kunt bereiden, zoals vis, vlees, groenten, rijst- en pastagerechten, evenals aardappelgerechten en desserts. Dankzij de grotere inhoud is hij ook ideaal voor gerechten met saus, zoals goulash. Afmetingen: B x D x H 800 x 600 x 200 mm Kenmerken: 2 verwarmingszones Afmetingen grilloppervlak: B x D 740 x 540 mm Vermogen: 400 V / 8,0 kW Zekering: 16 Ampère Gewicht: 40 kg Behuizing volledig van roestvrij staal Behuizing 170 mm hoog Voeten 30 mm hoog In hoogte verstelbaar tot 75 mm Staalplaat, speciaal gehard Hardverchroomd Energiebesparende technologie Traploze thermostatische verwarming Optimale warmtegeleiding Grote, volledige warmteopslag Crsdpfx Adoxuqnroaji 120 mm brede warmhoudzone aan de bedieningszijde Vetafvoer/restafvalafvoer: 130 x 30 mm, in het midden aan de bedieningszijde Vind meer artikelen – nieuw en gebruikt – in onze shop! Internationale verzendkosten op aanvraag!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: GG520A-19388 GG6BCO-7816, total width: 5,272 mm, total length: 12,500 mm, total height: 1,500 mm, overall weight: 5,300 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 520LAMe-37: Automatic machine for cutting, breaking, and separating laminated glass SN GG520A-19388 from 2011. Automatic positioning according to optimization, automatic blade, 2 independent heating sections, 20mm trimming, laser device for positioning diagonal cuts. Maximum cut 3700mm, maximum 100m/min, minimum 2/2 and maximum 8/8mm. Includes Bottero jumbo table 100BLC-J with belts and air cushion as loading and support table SN: GG6BCO-7816 from 2001. New felt (5mm) on the unloading table; the 520 LAMe-37 has also received maintenance. Csdpfsxg Nxysx Adajri

Condition: used, Year of construction: 2004, total length: 3,600 mm, total width: 1,800 mm, total height: 1,750 mm, Weight: 970 kg Cjdpfjxdlxksx Adaori Price: On request - Year: 2004 - Documentation available: No - Serial number: AB/166667 - Roller table length [mm]: 3200 - Table width [mm]: 1040 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 400 - Options: Scoring unit - └ Spindle speed pre-cutter [rpm]: 8500 - Spindle speed: - └ Min. spindle speed [rpm]: 3000 - └ Max. spindle speed [rpm]: 5000 - Voltage [V]: 400 - Current consumption [A]: 18 - Transport dimensions: 3600mm x 1800mm x 1750mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), functionality: fully functional, MACHINE DETAILS Machine type: Manual edge stripping system Alignment: Aligned against stop rails Fixation: Integrated suction cup for fixation Cjdsxurq Uspfx Adasri EQUIPMENT Side table for manual edge decoration Side-guided sanding heads Manually adjustable sanding pressure

Condition: used, Year of construction: 1988, control Heidenhain 355 Credpfx Adef Tdvbjaoi tool adaptor SK50 weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Bohner BG 80 A Griddle Plate Multifunctional use for frying, cooking, and simmering food This multi-grill features a special grill surface that allows you to prepare all kinds of food directly on the griddle plate, such as fish, meat, vegetables, rice and pasta dishes, as well as potato dishes and desserts. Thanks to its larger capacity, it's also ideal for dishes with sauce, such as goulash. Dimensions: W x D x H 800 x 600 x 200 mm Features: 2 heating zones Grill surface dimensions: W x D 740 x 540 mm Power rating: 400 V / 8.0 kW Fuse rating: 16 Amps Weight: 40 kg Housing made entirely of stainless steel, Housing 170 mm high Device feet 30 mm high Height adjustable up to 75 mm Steel plate, specially hardened Hard chrome plated Energy-saving technology Infinitely variable thermostatic heating Optimal thermal conductivity Large, full-surface heat storage area 120 mm wide warming zone on the operator side Grease drain/residual waste disposal: 130 x 30 mm, located in the center on the operator side Codpexuql Djfx Adaeri Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 1996, total length: 3,900 mm, total width: 2,100 mm, total height: 1,520 mm, - Year: 1996 - Documentation available: No - CE marking present: Yes - Serial number: V233567 - Roller table length [mm]: 3200 - Table width [mm]: 1300 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - └ Arbor pre-cutter saw blade diameter [mm]: 22 - Spindle speed: - └ Min. spindle speed [rpm]: 2800 - └ Max. spindle speed [rpm]: 5500 - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 16 - Transport dimensions: 3900mm x 2100mm x 1520mm (l x w x h) - Transport packages [pcs.]: 1 Crodpfxoxdlx Rs Adaei Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, cutting length (max.): 3,300 mm, cutting width (max.): 2,550 mm, section length (min.): 700 mm, TECHNICAL DETAILS Working dimensions min.: 700 x 300 mm Working dimensions max.: 3,300 mm to 2,550 mm MACHINE DETAILS Required space: 6,308 x 2,830 mm EQUIPMENT Low grinding table Cedpfx Adoxurpkeasri Swivelling loading arm Manual cutting system Note: Further information regarding the machine layout can be found in the attached images.

Condition: used, Year of construction: 1990, table load max. 40 t t with manual operation panel ja weight of the machine ca. 22 t 1918 Year ca. 1990 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Crjdpfx Ajhy T Nvodaji

Condition: used, Year of construction: 1990, x-travel 1600 mm ja Csdpfx Aswlvtdedaeri weight of the machine ca. 13,7 t

Condition: used, Dreh- und kippbar für Schweißpistole oder für Plasma condition nicht geprüft Csdpfxsidv Ere Adaori +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1966, table diameter 44 mm Credpfeud Trqsx Adaei table load . t table height . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m

Condition: used, Year of construction: 1988, centre height 350 mm weight of the machine ca. 50 KG tool adaptor MK5 Cedpfx Aonlbk Rodaori

Condition: used, Year of construction: 1970, table length 2200 mm table width 115 mm table load 600 t weight 3 t 2 Codpfjudc Twsx Adaori