Used Turning Tensioner for sale (9,771)

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station with 2xMotors , HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and Kdsdpfx Ahjl Rix Ns Dsr strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with 2xHF motor 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of th

Condition: used, Year of construction: 2006, operating hours: 32,615 h, functionality: fully functional, machine/vehicle number: R7S017, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, type of input current: three-phase, Colchester Tornado T8MSY CNC Turning Centre TOTAL PRICE: £15,000 +VAT Manufacturer: Colchester / 600 Lathes Model: Tornado T8MSY Year of Manufacture: 2006 Control: FANUC CNC Control 18i-TB Serial No: R7S017 Location: Dynomec, Castleford, West Yorkshire Max Bar Capacity: 65mm Diameter Machine Overview & Specification • Configuration: CNC Turning Centre with Driven/Live Tooling, Sub-Spindle, and Y-Axis • Max Spindle Speed: 5,000 RPM • Electrical Requirements: 415V / 3 Phase / 50 Hz / 53 Amps • Power On Hours: ~32,615 Hours (see control screen image for exact breakdown) • Cutting Hours: ~7,781 Hours (see control screen image for exact breakdown) • Total Parts Count: 307,051 (as shown on control screen) Kdjdpfx Ahjzr Ngno Dsr NOTE ON MACHINE HOURS & PARTS COUNT: The screen readings pictured were taken prior to listing. The machine was operated for a couple of days after the photos were taken, so the current power-on hours, cutting hours, and total parts count will be slightly higher than shown. Included Package • Bar Feeder: Tornado MBF1000T 1-Metre Short Magazine Bar Feeder • Tool Holders: Comprehensive assortment of static and live VDI tool holders (as shown in photos) • Collets: Assortment of collets included • Jaws: Assortment of chuck jaws included IMPORTANT NOTE ON TOOLING: Sale includes the tool holders only. Any cutting inserts, drills, end mills, or boring bars pictured fitted inside the tool holders are shown for demonstration and are excluded from the sale. Payment, Collection & Transport Terms • Cleared Funds: Machine will not be released, loaded, or dismantled until full payment has cleared into our account. • Transport & Rigging: The buyer is fully responsible for all machine rigging, lifting equipment, transport, and loading logistics. • Collection Timeframe: The machine must be collected and removed from site within 14 days (2 weeks) of purchase. Additional Terms & Viewings • Pricing & VAT: Price includes VAT. A full VAT invoice will be provided. • Returns Policy: Returns are not accepted. Sold as seen. • Viewings: Viewing under power on site at Dynomec Ltd, West Yorkshire, is heavily recommended prior to committing to purchase so buyers can fully inspect and satisfy themselves with the machine's condition. Viewings are strictly by prior appointment. • Warranty: Sold with no implied or given warranty. • Availability: This item is listed elsewhere; we reserve the right to remove this listing at any time. Contact: For any further information, please contact us directly. A VAT Invoice is able to be supplied with the machine

Condition: good (used), Year of construction: 2012, functionality: fully functional, DOOSAN PUMA 2600S – CNC turning center with subspindle, FANUC, year 2012 We offer for sale a DOOSAN PUMA 2600S CNC turning center with subspindle, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is in operation and can be demonstrated and tested upon request. Technical specifications: Manufacturer: Doosan Infracore Model: PUMA 2600S Year of manufacture: 09/2012 Serial number: ML0218-000034 CNC control: DOOSAN-FANUC i Series Configuration: main spindle + subspindle Max. turning diameter: approx. 376 mm Max. turning length: approx. 760 mm Main spindle chuck: approx. 10" Kodpszvhz Ejfx Ah Dodr Bar capacity through main spindle: approx. 76 mm Max. main spindle speed: approx. 3,500 rpm Main spindle power: approx. 18.5 / 22 kW X-axis travel: approx. 260 mm Z-axis travel: approx. 830 mm Turret: 12 positions Automatic subspindle for complete part machining Chip conveyor Rated machine power: 40.7 kVA Power supply: 200/220 V, 3 phases, 50/60 Hz Machine weight: 5,400 kg Robust CNC turning center suitable for both series and single-piece production. Thanks to the subspindle, it enables machining of the part from both sides without the need for manual switching between individual operations. The machine is currently powered on and can be demonstrated in operation.

Condition: good (used), Year of construction: 2011, Control Fanuc OI-TD, bar capacity 20mm, maximum cutting diameter 20mm, maximum cutting length 183mm, maximum drilling diameter 10mm, maximum tapping capacity M8, milling speed 6,000rpm, spindle speed 10,000rpm, Kedpfxeyw R Ero Ah Dedr C axis 0.001 degree, FMB barfeed, number of controlled axis X Y Z XB ZB.

Condition: used, Year of construction: 2015, operating hours: 21,822 h, gearing type: automatic, color: other, Year of manufacture: Aug 2015 Ksdpfx Ahezvfyfo Dodr Axle 1: left 22 mm right 22 mm Axle 2: left 26 -26 mm right 26-26 mm Axle 3: left mm right mm

Condition: good (used), Year of construction: 2020, Maximum cutting diameter 305mm, maximum machining length 406mm, bar capacity 63.5 mm, spindle speed 4000 rpm, Kdsdpfx Ahjzg Edlo Dsr 20 hp spindle motor, 12 station turret, coolant, and swarf conveyor, 3 jaw chuck, toolsetter,

Condition: good (used), Year of construction: 2013, 480mm swing over bed, 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, Kjdpfx Ahozqr Hns Djdr 25-2500rpm spindle, 7.5kW Spindle Motor, coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Excellent Condition Ksdpfxezfguij Ah Djdr Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Fixed Steady x 2 Travelling steady Fully Serviced And Ready For Production

Condition: used, Year of construction: 2011, HWACHEON HI-TECH 200B MC CNC LATHE MAKE HWACHEON, MADE IN SOUTH KOREA MODEL HI TECH 200B, MC YEAR 2011 CONTROL FANUC Oi-TD SWING OVER BED 500.0 mm SWING OVER SADDLE 390.0 mm MAX MACHINING DIA 350.0 mm MAX WORK LENGTH 400.0 mm TRAVERSES (XZ) X AXIS: 195.0 mm Z AXIS: 430.0 mm CHUCK DIA 250.0 mm MAX. SPINDLE SPEED 3,500 RPM SPINDLE NOSE A2-8 SPINDLE BAR CAPACITY 76 mm TURRET 12 STATIONS MACHINE WEIGHT 4,500 kgs PLUS C AXIS MILLING CNC BARFEED RENISHAW PROBE PARTS CATCHER TAILSTOCK SWARF CONVEYOR Kedpfx Ahsyyy Sts Dedr MACHINE MANUALS

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Turning diameter: max. 465 mm Turning length: 1050 mm Kdjdpfx Ahev Epzvs Dsr Diameter when turning: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: Max. 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Bearing diameter in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Tool post stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40 Accessories: Chip conveyor Tool holders, chuck jaws

Condition: refurbished (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, Fully equipped machine IMECA BOSS 32 L edger Turning tool holder included 6 fully overhauled motorized tools New tool drive gearbox. Ksdjzic Ruepfx Ah Djdr New Y-axis, motor, and ball screw. Clamping and guiding device provided with the machine New edger channel 380 V / 220 V transformer included

Condition: good (used), Year of construction: 1988, functionality: fully functional, total height: 1,800 mm, total length: 2,550 mm, total width: 1,600 mm, overall weight: 4,300 kg, Model: MAZAK QUICK TURN 15-U Year of manufacture: 1988 Control system: Mazatrol CAM T2 Working area: max. swing diameter: 440 mm max. turning diameter: 270 mm max. turning length: 500 mm bar work up to a diameter of max. 51 mm Kodpfezvf H Sex Ah Dsdr Main spindle: speed range: 36 – 3,600 rpm main drive power: 15 kW constant torque: 230 Nm spindle nose: A2 – 6 inches spindle bore: 61 mm Tool turret: standard version: 8-position turret indexing time: - 1st station: approx. 0.5 s Travel ranges: turret – travel range: x-axis: 155 mm z-axis: 510 mm Rapid traverse rate: x-axis: 12 m/min z-axis: 24 m/min Tailstock: tailstock travel: 460 mm tailstock spindle: MK 4 tailstock quill stroke: 130 mm Machine data: total connected load: 31.3 kVA machine weight: 4,300 kg machine dimensions: L x W x H: approx. 2.55 x 1.60 x 1.80 m

Condition: used, Year of construction: 2013, functionality: fully functional, The Tsugami B0385L is a powerful, CNC-controlled long-bed lathe (Swiss type) with the following special equipment: - Dust extraction system - Fire protection system - Chip conveyor Technical data: - General overhaul 2020 Main and counter spindle Ksdpfx Ajzizufeh Djdr • Max. machining diameter: Ø 38 mm • Bar capacity: Ø 8 mm to Ø 38 mm • Max. turning length: 100 mm (without guide bushing) • Max. turning length with guide bushing: 300 mm • Main spindle speed: 200 – 6,000 min⁻¹ • Counter spindle speed: 200 – 6,000 min⁻¹ • Main spindle motor power: 7.5 / 11 kW • Counter spindle motor power: 3.7 / 5.5 kW Tool holders and axes • Total number of tool positions: 21 (standard) • Driven tools (cross-working): 200 – 5,000 min⁻¹ (power approx. 1.0 to 1.4 kW) • Tool shank size: 20 x 20 mm • Rapid traverse speeds: 32 m/min Control system: Fanuc 0i-TD Machining capacities (maximum values) • Max. drilling diameter (main spindle): Ø 13 mm • Max. threading (main spindle): M12 • Max. drilling diameter (counter spindle): Ø 12 mm • Max. drilling diameter (cross tool): Ø 10 mm Dimensions and weight • Machine dimensions (W x D x H): approx. 2,520–2,770 mm x 1,345–1,515 mm x 1,970–2,050 mm • Weight: approx. 4,600 kg

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: BL278700, center height: 150 mm, turning diameter over cross slide: 177 mm, spindle bore: 40 mm, turning diameter: 340 mm, spindle nose: Camlock D 1-4, type of input current: three-phase, total length: 1,730 mm, total height: 1,300 mm, total width: 970 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, empty load weight: 1,250 kg, overall weight: 1,250 kg, For sale is a Schaublin 150 precision lathe from Switzerland. It is considered one of the best conventional lathes ever built. The machine has been overhauled. The spindle has been fitted with new bearings. The bearing set was ordered directly from Schaublin. The slides have been scraped. Turning tests with 30mm round steel resulted in a cylindricity of 0.002mm over 200mm. A large amount of accessories is included with the machine: - Reishauer 3-jaw chuck, 2x - Original Multifix B Mivesa tool holder - Collet chuck with lever clamp - Schaublin B32 collet set, 2 to 28mm, complete in 0.5mm increments, with MK5/B32 reducing sleeve and draw tube. - Steady rests - Machine documentation with catalog - Complete standard set of change gears, plus special gears - Conventional tool holder from Schaublin - Fixed and live center - Albrecht drill chuck - Coolant system - Digital readout The machine has not been used extensively in recent years and was only used sporadically. Extremely robust construction, suitable for hard turning. Center height: 150mm Distance between centers: 630mm Spindle bore: Ø40mm Spindle speed, continuously variable: 55-3,000 rpm Feed rate: 0.05-0.35 mm/rev Spindle taper: MK5 Tailstock taper: MK3 Kedpfey Uqx Hox Ah Dodr Swinging diameter over cross slide: Ø177mm Swinging diameter over bed: Ø340mm Motor: 4.5kW Dimensions: 1,730x970x1,300mm Weight: 1250kg The machine can be inspected and tested under power by arrangement in 5023 Salzburg.

Condition: new, maximum load weight: 27,890 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new 3-axle Knapen SANH sliding floor trailer * BPW 9-tonne ECO Air HD rigid axle with disc brakes 430, 10-bolt, offset 120 * TireCheck tire pressure monitoring system * Smart Board * 1st axle: lift axle including starting aid * Steel rims with rim size 22.5" x 11.75 * Krone TRUSTED KT 231 385/65R22.5 164J 3PMSF tires * Gearbox-supported winch with thrust compensation * Swinging mud flaps * Plastic tool box 1000x500x500mm * 28 L water tank with soap dispenser Kodpfszn Drdox Ah Dsdr * Long aluminum ladder * Extendable stairs with platform at the rear of the trailer * Broom and shovel holder, CARGOFLOOR CF-500 SL-C system, electronic operation * Diamond-patterned aluminum floorboards, 10 mm, 21 boards * Wear plates at the ends of the floor profiles, 350 x 3 mm * Stainless steel plate at the rear under the floor * Platform on the front wall with ladder * Moving bulkhead * Rear doors with external locking bars, one locking bar per rear door * Foldable "A" sign on the left rear door * Tarpaulin with side straps and tensioning ratchets under the trailer * Fixed side on the right, overhang on the left approx. 400 mm * Tarpaulin 900 gr./m2 * 3-position tarpaulin supports (4 pieces) * Side wall protection tarpaulin mounted in the keder on the left side wall, including fixed roll-up mechanism at the front, color: dust gray, RAL 7037 * 2 ECOLED III rear lights, completely LED * LED side marker lights flash simultaneously with the turn signal * 3 pairs of additional work lights * Acoustic reversing warning * Remote control for floor, lift axle, and work lights * Hydraulic connections on the front wall and at the kingpin supports * Air connection 7.2 mm, "workshop connection" * Tarpaulin similar to RAL 9006 WHITE ALUMINUM * Body RAL 7011 IRON GRAY * Chassis galvanized, not painted * A-frame painted in RAL 7011 IRON GRAY * Also available as a rental vehicle Inquire about our attractive financing options.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,416 h, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 630 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 3,500 rpm, total height: 1,720 mm, total length: 2,870 mm, total width: 1,675 mm, overall weight: 4,500 kg, chuck outer diameter: 260 mm, spindle nose: A2-6, Equipment: documentation/manual, rotational speed infinitely variable, The Hwacheon Hi-Tech 200BL is a robust CNC lathe that stands out in practice for its strikingly simple operation. The machine features an intuitive design and predictable performance, making setup and operation feel quickly familiar. Kdodpfxeyvqw Se Ah Dsr A major advantage is the configuration with only an X and Z axis. The lack of additional axes and complex functions keeps the operation clear and efficient. This HWACHEON HI-TECH 200BL machine is standard equipped with: - Chip conveyor + collection bin. - Schunk 3-jaw chuck (ROTA NC Plus 260-86) including various sets of top jaws. - Original HWACHEON and FANUC documentation. Weight & dimensions: - 4,500 kg - approx. 2870 x 1675 x 1720 mm (LxWxH)

Condition: used, mileage: 70,275 km, power: 130 kW (176.75 HP), first registration: 01/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 3,268 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sales excepted! Internal number: 1143.9025274 ----EQUIPMENT * Airbag for driver and front passenger - with front passenger airbag deactivation * Towing hitch, fixed - incl. trailer stabilization * Automatic Distance Control ACC "follow to stop" up to 160 km/h, including speed limiter * Exterior mirrors, electrically adjustable and heated Kdedpezh Slfofx Ah Djr * BOTT shelving system incl. vice * Seats, 1st row: Double co-driver seat on the right, with storage compartment, including headrest in the 1st row, height-adjustable * High beam assistant "Light Assist" * Driver assistance systems: "Front Assist" ambient monitoring system with city emergency braking function - for automatic distance control ACC up to 160 km/h * Axle load class, front axle - reinforced front axle * Air conditioning "Climatic" - air conditioning "Climatic" in the cab - refrigerant R134a * Steering wheel: Multifunction steering wheel (3 spokes) * Fatigue detection system * Package: Driver Assistance 2: Front Assist, ACC, Lane Assist - Fatigue detection system - Multifunction steering wheel (3 spokes) - "Front Assist" ambient monitoring system with city emergency braking function (for automatic distance control ACC up to 160 km/h) - "Lane Assist" lane keeping assistant - Automatic distance control ACC up to 160 km/h, including speed limiter - "Plus" multifunction display * Package: Light and Visibility - High beam control "Light Assist" - Daytime running lights with automatic headlight switching, "Coming home" function, and manual "Leaving home" function - Windshield wiper intermittent control with light and rain sensor * Radio "Composition Media" with 8" touchscreen and mobile phone interface - Radio "Composition Media" with 8" touchscreen - Voice control - 1 USB interface (iPod/iPhone/iPad compatible), AUX-IN multimedia socket - Glove compartment with lockable flap, illuminated - 4 speakers: 2 tweeters, 2 woofers - "Plus" multifunction display - Car-Net App-Connect - Mobile phone interface * Rear view camera "Rear View" * Windshield wiper intermittent control with rain sensor, automatic headlight switching - Daytime running lights with automatic headlight switching, "Coming home" function, and manual "Leaving home" function - Windshield wiper intermittent control with light and rain sensor * Interior trim: Side panel in the cargo area made of plywood, up to the roof frame * Seat heating, left and right, separately adjustable, in the 1st row * "Lane Assist" lane keeping assistant * Rear step, over half the width * Tie-down rails: C-rails on the side walls in the cargo area * Socket: 12-V socket and 4 cup holders in the dashboard * Storage package 2: Roof rack with two 1-DIN compartments and reading light * Airbag: Driver side * Exterior mirrors (left and right) convex, with integrated LED turn signal and wide-angle area * Hill start assist * Brake light, third * Chrome accents in the cab * Three-point automatic safety belts with height adjustment and belt tensioners for driver and front passenger * Electronic Stability Program and ABS * Entry/grab handles (in the cargo area) Grab handles on the rear pillars * Gross vehicle weight: Vehicle registration with a permissible gross vehicle weight of 3.5 t * Power windows * Transmission: 8-speed automatic * Axle load class, front axle - Front axle (1,800 kg load capacity) * Floor coverings: Rubber floor covering in the cab * Storage: Glove compartment with lockable flap, illuminated * Rear double doors without window * High roo

Condition: used, Year of construction: 1996, turning diameter over bed Ø16 mm mm weight of the machine ca. 2,3 t Kdjdpfx Ahsztfw Ee Dsr dimensions of the machine ca. 2045 x 900 x 1685 m

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance Z-axis: 1,500 mm, chuck outer diameter: 1,800 mm, spindle speed (max.): 315 rpm, turning diameter: 2,000 mm, turning height: 2,450 mm, rotational speed (max.): 3,000 rpm, year of last overhaul: 2026, FOR SALE – 12 MONTHS GUARANTEE – CE MARKED A DORRIES-SCHARMANN VCE2000/180MC-FC CONTUMAT Vertical Turning, Centre for high accuracy heavy cut turning, high precision heavy PCD drilling and continuous rotary milling Delivered in 2002. Condition: Excellent - see INTRO page CNC specification – high level Siemens 840D Hydrostatic crossrail and ram guideways. Cutting and positioning feed rates up to 18m/min A 9-STATION MAGAZINE is for turning toolheads & machining heads. These heads are picked up by the ram during cycle The turning and milling heads are fed by a KELCH DOUBLE GRIPPER TOOL CHANGER, as seen on most machining centres The tool changer collects the turning tools (CAPTO C8) and live spindle tools (SK50) from a WERO magazine The magazine as supplied with this machine originally has the capacity to hold 60 Capto C8 tools and 76 SK50 tools The KELCH toolchanger can change the tools in both vertical and horizontal working positions. This means, for example, that various SK50 tools can be fed into a right angle milling head while it remains on the ram MACHINE SALE POSSIBILITIES The machine specification will be finalized by the purchaser and VTT-WB New guarding will be supplied to match the final specification GUIDE PRICES A – machine without the pallet system but with the full tool changing and tool storage system. New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance Tool storage capacity can be reduced within this price £525,000 Kdsdpsy Uw Emsfx Ah Dsr B – machine without the pallet system and toolchanging and storage system replaced with 30 pocket disc type magazine New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance £540,000 C – machine to original specification including full pallet system and full tool change system New guarding. CE marking 12 months full warranty, including 96% uptime guarantee on machine but excluding pallet and toolchange system £650,000

Condition: used, Year of construction: 2008, turning diameter 310 mm turning length 600 mm control Sinumerik 810 D PL Siemens turning diameter over bed 425 mm turning speed range - main spindle 500 - 4.500 min/-1 max. Torque 280 Nm power capacity - main spindel 16,5 kW Spindle diameter 100 mm C-Axis 360 ° chucking diameter 210-52 mm spindle bearing diameter 120 mm clamping cylinder 65 mm Bar feed max. 65 / (52) mm spindle nose A8 DIN 55026 x-axis 230 mm z-axis 740 mm rapid traverse X-axis 15 m/min rapid traverse Z-axis 24 m/min tool positions turret 12 pos. driven statition 12 pos. tool taper VDI 30 DIN 69880 Spindle speed driven tools 6.000 min -1 power capacity - driven tools 3,7 kW max. Torque 9,5 Nm dia. of quill MK 4 80 mm quill stroke 120 mm tailstock adjustment 475 mm tension force 500 daN weight of the machine ca. 4,2 t Kdedpetqmqhjfx Ah Der dimensions of the machine ca. 3,7 x 2,2 x 1,8 m CNC - Turning- and Milling Center SPINNER - TC 65 MC - Turret completely overhauld

Condition: excellent (used), Year of construction: 2012, Capacity Swing over bed 950mm Swing over carriage 630mm Max turning diameter 950mm Max turning length 4845mm Distance between centres 5000mm Max load between centres 5000kg Spindle Spindle speeds 2 - 630rpm 630 H Max 205 L Max Spindle speed range step manual 2 Spindle nose type A2-15" Spindle bore 254mm Spindle centre taper MT6 Number of Tool positions 8 Kodpjzhaqvofx Ah Dodr

Condition: new, Year of construction: 2026, width of the strips 50.0 mm band length 940 mm band speed 3.0 - 22 m/min turning speeds 1450 U/min tube diameter 16.0 - 114 mm radius 180 ° total power requirement 4.75 kW weight of the machine ca. 265 kg Kodexaaxqspfx Ah Dedr range L-W-H 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Condition: excellent (used), Year of construction: 2012, GILDEMEISTER - CTX 310 eco V3, year of manufacture 2012, spindle hours approx. 8000 hours Turning diameter 210 mm Turning length 580 mm Control system 840 D Siemens Center height 190 mm Turning diameter over the bed 330 mm Turning diameter over the compound slide 260 mm Kdjdpozumn Ujfx Ah Dsr Spindle speed range - main spindle max. 4,000 rpm Drive power - main spindle 10 / 7.5 kW Max. torque 115 / 86 Nm Spindle bore 68.5 mm Usable bar diameter 51 mm C-axis 0.001 ° Travel - x 185 mm Travel - z 455 mm Number of tool positions 12 Tool holder VDI 30 Driven tool stations: 6 Tailstock travel 400 mm - Chuck including various jaws - 12 VDI 30 tool holders - Driven tools: none - Chip conveyor

Condition: used, Year of construction: 2015, control Haidenhein serial number 10981203183 Axis 5 ja x-travel 1.250 mm y-axis 1250 mm z-travel 1000 mm workpiece diameter: 1250 mm Kedszpbl Rjpfx Ah Djdr Ja not simultaneously

Condition: excellent (used), Year of construction: 2015, FANUC 31i-B control C-axis on both spindles Milling drive on the upper turret Milling drive on the lower turret Travel range – Y1 axis: 80 (+/- 40) mm Travel range – Y2 axis: 65 (+/- 32.5) mm Swivel range of B-axis: +/- 91° Kdjdpfx Aezum Tdeh Der Incline angle: 90° MAIN SPINDLE Bar diameter: 42 mm Spindle diameter: 51 mm Spindle speed: 6,000 rpm Drive power – spindle motor max./continuous: 11 / 7.5 kW TAILSTOCK SPINDLE Bar diameter: 42 mm Spindle diameter: 51 mm Spindle speed: 6,000 rpm Drive power – spindle motor max./continuous: 11 / 7.5 kW TOOL TURRET Tool magazine positions, upper turret: 12 / 24 + 6 Tool magazine positions, lower turret: 12 / 24 INCLUDED Inclined bed filter system Hinged belt chip conveyor, discharge to the right Coolant system Material collection tray