Used Twin Shaft Shredder for sale (8,860)

Condition: good (used), Wood shredder for sale Prepared for conveyor belt removal Ideal for shredding wood residues (all types of softwood) and pallets Gksdpoxbyx Tefx Aayjb Includes hydraulic pusher Motor: 7.5 kW Rotor width: approx. 82 cm Weight: 1,460 kilograms Full load current: 32 amp Main fuse: 35 amp

Condition: like new (used), Year of construction: 2021, power: 264 kW (358.94 HP), Electric engine: 264 kW Equipped with: Discharge conveyor, overband magnet, radio remote control. Gedpfx Aownq Disayekb

Condition: used, Used AMIXON model HM 400 stainless steel vertical twin-shaft ribbon mixer. Manufacturer: AMIXON (Ruberg Mischtechnik KG) Model: HM 400 Gross volume: 530 litre (approximately) Working volume: 400 litre (approximately) Type of agitators: Twin shaft ribbons + side chopper Gkedpfx Aewr Dhcsaysb Drive of agitators: 7/9 kW, 380 V, 970/1475 rpm (driven through gearbox) Drive of chopper: 5.5 kW, 380 V, 1475 rpm Includes: side inspection doors with dimensions 640 x 550 mm, control panel, hopper

Condition: used, Year of construction: 2024, operating hours: 400 h, functionality: fully functional, overall weight: 21,000 kg, power: 280.23 kW (381.01 HP), fuel type: diesel, color: red, number of blades: 5, motor manufacturer: CAT, motor model: CAT C9.3, Rollers with 5/5 discs, each disc with 5 knives Crushing bar with comb Sturdy hooklift frame Wheel axle with drawbar (solid rubber tires) Water spray system Permanent overband magnet (neodymium magnet system) Steel-reinforced chevron belt Remote control Godpezq A D Dofx Aayokb

Condition: used, Year of construction: 2011, functionality: fully functional, Shredder Höcker PHSS 40/110 Technical data: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of manufacture: 2011 Gkodpfx Ajzt Inteayob Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Note: The machine is in good working order. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Inspections are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, prior sale is reserved, and they can be revoked at any time. Inspections are possible by arrangement. The sale is ex works, without warranty.

Condition: used, Year of construction: 2014, operating hours: 8,150 h, functionality: fully functional, machine/vehicle number: 600-687 und 610-352, overall weight: 1,000 kg, rotor diameter: 252 mm, number of blades: 14, total length: 5,100 mm, total height: 810 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, control cabinet height: 215 mm, total width: 1,100 mm, power: 16 kW (21.75 HP), type of input current: three-phase, rotational speed (max.): 590 rpm, filling opening width: 300 mm, filling opening length: 3,000 mm, sieve perforation: 10 mm, extraction nozzle diameter: 200 mm, input current: 45 A, infeed height: 450 mm, Equipment: CE marking, documentation/manual, Horizontal shredder with vibrating chute Gkjdpfx Aszd Dhdjayob Weima WLH 300 and WRR 300; manufactured in 08/2014 - Ideal for shredding long and short pieces of wood - Automatic start-up via photoelectric sensor - Noise protection hood in the infeed area to reduce noise emissions

Condition: new, Year of construction: 2026, functionality: fully functional, rotor length: 900 mm, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits ASCO DS 600 and DS 900 double-shaft shredders deliver reliable shredding performance for recycling, waste management, municipalities, and construction logistics. Designed for wood, green waste, plastics, foils, pallets, packaging, and production residues, they ensure high throughput, low maintenance, and efficient material reduction-even with heavy or resistant waste. Key Features: • Compact yet powerful double-shaft shredders for diverse materials • Robust, durable construction with maintenance-friendly design Gkedpfjw Dc S Djx Aaysb • Counter-rotating shafts for secure and controlled shredding • Large filling opening (DS 900) for bulky and heavy materials • Intuitive control system with automatic reversing to prevent blockages Tech Highlights Rotor Ø 200-350 mm · Rotor L 900 mm · Rotor n 10-60 rpm · Power 8-60 kW

Condition: new, Year of construction: 2026, The item for sale is a single-shaft shredder equipped with a hydraulic pusher. Gsdpjq Sp Hajfx Aayjkb Brand/Manufacturer: 3E Machinery Model: WT440120 Main motor power: 75 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1200 mm Rotor diameter: 400 mm Number of knives: 70 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, with the option of mounting a second row of fixed knives (upper) depending on the type of waste being processed Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen, assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, receiving conveyor with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,580 mm, total width: 2,320 mm, total height: 2,600 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits The ASCO DS 600 is the ideal double-shaft shredder for recycling companies, municipalities, construction logistics, and industrial waste management. It reliably shreds wood, green waste, plastics, foils, pallets, and packaging with compact efficiency, low maintenance, and flexible stationary or mobile operation. Key Features: Gedpow Afvpjfx Aayekb • Robust counter-rotating shafts for powerful shredding • Versatile material handling across industries • Space-saving compact design • Easy operation with automatic reversing • Fast, user-friendly maintenance Tech Highlights: W 2.32 m · L 1.58 m · H 2.60 m · Cutter Ø 200–350 mm · Speed n 10-60 rpm · Power 8-60 kW · Weight 1870–2590 kg · Infeed 0.95 × 1.18 m · Discharge 0.60 × 0.60 m

Condition: excellent (used), Year of construction: 2022, operating hours: 216 h, functionality: fully functional, overall weight: 1,250 kg, rotor diameter: 260 mm, number of blades: 14, total length: 1,880 mm, total height: 1,670 mm, total width: 1,120 mm, rotor length: 550 mm, power: 18.5 kW (25.15 HP), rotational speed (max.): 120 rpm, hopper volume: 400 l, rotational speed (min.): 80 rpm, warranty duration: 3 months, Machine in very good condition. Manufactured in December 2022. Reuser SD 60, 18.5 kW The single-rotor universal shredder, Robust Reuser SD 600, is a symbol of strength, determination, and uncompromising performance. It operates according to its own rules, but in perfect harmony with your needs. Its minimalist yet distinctive design gives it a touch of timelessness. Gkjdpfszlm T Eex Aayjb Advantages: Single-rotor shredder Material feed via excavator, forklift, or hydraulic lifting arm Unitronics® PLC control unit Hydraulic unit with 20 liters of oil

Condition: new, Year of construction: 2025, overall weight: 150,000 kg, We offer Lines for shredding and separating non-ferrous metals and copper cables. The line can be freely modified according to the customer's needs. The attached visualization is illustrative. Machines included in the line: Drum Belt Magnetic Separator Multi-shaft shredder 2 x 18.5 kW MCW-110 1. Loading conveyor (controlled automatically by shredder, according to load) Technical data: - L – 4000mm -Working width – 720mm - Height – 2100mm - Geared motor – 1.5kW - PVC conveyor belt equipped with straight cleats. - Steel structure, placed on self-adjusting wheels 2. Unloading conveyor (receives the shredded material for further process) Technical data: -L. – 3600mm - Working width - 400mm - H – 2000mm - Geared motor – 1.1kW - PVC conveyor belt equipped with a sealing wave and straight cleats - Structure made of acid-resistant steel, placed on self-casting wheels Gedpfxev I Shds Aayekb 3. Magnetic separator – (automatically separates unwanted steel elements from the belt of the unloading conveyor) Technical date: - L – 1400mm - Working width – 380mm - Height – 300mm - Geared motor – 0.55kW - Structure made of acid-resistant steel - PVC conveyor belt equipped with straight cleats - Magnetic plate made of permanent magnets 4. Magnetic plate with quick-cleaning overlay – (separates very small steel elements) Technical date: - W – 490mm - L – 330mm -H- 80mm - Housing made of acid-resistant steel Vibrating feeder PWR-1000 Eddy Current Separator WPS-1000 Discharge conveyor no. 2 of the WPS-1000 separator . Horizontal shredder RKZ-1200 Dust extraction DUST EATER OPW-400 GoldRiver SWZ-700 Water Separator Automatic plastic receiver Automatic metal vibration receiver.

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Single-Shaft Shredder WT40100 – 45 kW – Hydraulic Pusher – NEW GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling lines. We offer a new industrial single-shaft shredder, the 3E Machinery WT40100, equipped with a 45 kW main motor and a hydraulic pusher system. The WT series is designed for the pre-shredding of large and bulky materials that cannot be fed directly into granulators due to their size and structure. The hydraulic pusher automatically pushes the material towards the rotor, ensuring efficient and stable shredding. TECHNICAL SPECIFICATIONS: Model: WT40100 Godpfsznbhiox Aayokb Type: Single-shaft shredder with hydraulic pusher Main motor power: 45 kW Hydraulic motor power: 2.2 kW Rotor length: 1,000 mm Rotor diameter: 390 mm Rotor speed: 74 rpm Rotor knives: 58 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,410 × 1,000 mm Machine dimensions (L × W × H): 2,825 × 2,004 × 1,875 mm Discharge height: 500 mm Weight: approx. 4,000 kg Control system: Siemens components / Siemens LOGO PLC Condition: Brand new Technical parameters according to the WT series specification published by GrabTrade. APPLICATIONS: The WT40100 is suitable for shredding a wide range of materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, PVC, plastic pipes and profiles, film waste, crates, boxes, and containers, wood and pallets, paper and cardboard, textile waste, carpets and Big-Bags, cable waste, industrial and bulky waste. The hydraulic pusher system continuously pushes the material towards the cutting rotor, providing effective processing even with bulky or irregularly shaped waste. The shredder is equipped with a robust low-speed rotor, an external bearing system, and overload protection. The machine can also be integrated with a granulator, conveyor, screw conveyor, or other equipment to create a complete shredding and recycling line. 3E Machinery specifically demonstrates the WT40100 operating together with a PC4280 granulator as a complete shredding system. Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts. Full range of our shredders, granulators, and complete recycling lines: GrabTrade – shredding and recycling machines.

Condition: refurbished (used), Year of construction: 2010, operating hours: 34,616 h, functionality: fully functional, machine/vehicle number: 1244801, overall weight: 13,500 kg, rotor diameter: 500 mm, number of blades: 125, rotor length: 1,800 mm, type of input current: AC, sieve perforation: 30 mm, VECOPLAN Type VAZ 1800F shredder, after complete renovation, ready to work. The machine is fully functional, the following parts have been replaced: cutting system (knife bases, knives, counter knives, rotor surfacing), vibration isolators, sliding strips, sieve, oils in gears, electrical, hydraulic and pneumatic installations. Godpfx Aaovx Rtajyokb

Condition: good (used), Year of construction: 1998, Motor power [kW]: 150 (2x75) Number of blades on the shaft: 48 (2x24) Blades [mm]: 80x80x45 mm (reinforced/extended mounting threads). New, square. 4 blades, of which 3 blades are 100% and 1 blade is approximately 70% new Rotor: Gkodsibzbhspfx Aaysb Shaft width [mm]: 2,100 Number of shafts: 2 Shaft diameter: 500 mm Shaft speed [rpm]: 75-165 Screen diameter [mm]: 30 mm Chamber dimensions [mm]: 2,100 x 1,250 Automatic start: Soft start Rated voltage: 3 x 400 V/50 Hz Rated current: 160 A-200 A Automation: Siemens Simatic Weight [kg]: approx. 14,500 Dimensions: Length [mm]: 3,850 Width [mm]: 2,720 Height [mm]: 2,700 Documentation: German 2014 A complete overhaul was carried out. A list of these parts and pictures are available upon request. This machine has not been used for several years (since then - one owner). Previously, it processed plastic, film, and cardboard - RDF after selective recycling. The approximate throughput for materials like the above (lightweight) is about 1-1.5 tons/hour. Other materials - to be checked/discussed. The machine was fully functional and is currently stored on site. Additional photos and video available upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 44,000 kg, rotor length: 2,800 mm, power: 315 kW (428.28 HP), rotational speed (max.): 87 rpm, - MERAK 2800-2 with 315 kW - Cutting system 116PR - PG190 screen (can be changed on customer request) - Feed chute - Dust suppression - Electrical central lubrication - Hydraulic safety guard - Overband magnetic separator Neodymium - HP - Rubberized bolted floor plates on tracked chassis Godpfx Aougf Dwsayokb

Condition: excellent (used), DOPPSTADT MECHANICAL ROLLER SHREDDER mod: DW 3060 E1 COMPLETE WITH ENGINE, HYDRAULIC CONTROL BOX, EXTRACTION BELT AND ELECTRICAL PANELS Year: 2005 Dimensions: Total length: mm 7900 Overall width without catwalk: mm 2950 Total height: mm 5600 Loading width: mm 1900 Loading length: mm 3060 Gkedpfeun Sx Sjx Aayjb Total weight: kg 30,000 approx. With motor: kw 315 Rotation speed: 2000 rpm With hydraulic power unit: kw 7.5 Cutting roller dimensions: Length: mm 3000 Rotor diameter: mm 600 Speed: 31 rpm Rotor: 1 Number of rotor teeth: 21 Teeth width: mm 60 Teeth height: mm 150 Rotor protection wear band material: Hardox 400 Comb: 1 Number of comb teeth: 22 Comb teeth width: mm 60 Useful extraction belt width: mm 1000 Installed power: kw 5.5

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Gsdpsyh Hc Rofx Aayskb

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40100 Main motor power: 45 kW Hydraulic system motor power: 2.2 kW Working rotor length: 1000 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 58 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece Hydraulic system equipped with an oil cooling system External bearing Gkodpoq Sp Ibefx Aayob The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Single-Shaft Shredder WT40100 – 45 kW – Hydraulic Pusher – NEW GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling lines. We offer a new industrial single-shaft shredder, 3E Machinery WT40100, equipped with a 45 kW main motor and a hydraulic pusher system. The WT series is designed for the pre-shredding of large and bulky materials that cannot be fed directly into granulators due to their size and structure. The hydraulic pusher automatically pushes the material towards the rotor, ensuring efficient and stable shredding. TECHNICAL SPECIFICATIONS: Model: WT40100 Type: Single-shaft shredder with hydraulic pusher Main motor power: 45 kW Hydraulic motor power: 2.2 kW Rotor length: 1,000 mm Rotor diameter: 390 mm Rotor speed: 74 rpm Rotor knives: 58 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,410 × 1,000 mm Machine dimensions (L × W × H): 2,825 × 2,004 × 1,875 mm Discharge height: 500 mm Weight: approx. 4,000 kg Control system: Siemens components / Siemens LOGO PLC Condition: Brand new Technical parameters according to the WT series specification published by GrabTrade. APPLICATIONS: The WT40100 is suitable for shredding a wide range of materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, PVC, plastic pipes and profiles, film waste, crates, boxes, and containers, wood and pallets, paper and cardboard, textile waste, carpets and Big-Bags, cable waste, industrial and bulky waste. The hydraulic pusher system continuously pushes the material towards the cutting rotor, providing effective processing even with bulky or irregularly shaped waste. The shredder is equipped with a robust low-speed rotor, an external bearing system, and overload protection. The machine can also be integrated with a granulator, conveyor, screw conveyor, or other equipment to create a complete shredding and recycling line. 3E Machinery specifically showcases the WT40100 operating together with a PC4280 granulator as a complete shredding system. Machine available in our offer. Gsdpfxjq Sp H Te Aayokb We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts. Full range of our shredders, granulators, and complete recycling lines: GrabTrade – shredding and recycling machines.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH twin-shaft concrete mixers are industrial mixing systems that combine high efficiency and durability. Thanks to their robust chassis structure, powerful twin-shaft mixing mechanism, and optimized paddle arrangement, they homogenously blend all aggregate, water, and cement mixtures. This allows for the production of high-strength concrete with a low water/cement ratio while minimizing mixing time. The mixer's spiral mixing system directs aggregates towards the center, ensuring complete uniformity and enabling the production of concrete of consistent quality in every batch. Its twin-shaft design maintains fluidity even in highly viscous mixtures, delivering superior performance in heavy-duty applications such as precast, block, and dam concrete. All models are equipped with modern safety and maintenance features, including an automatic lubrication system, maintenance covers with safety sensors, and a hydraulic discharge cover. Twin-Shaft Concrete Mixer Technical Specifications MODEL NO: CTS-1 Loading Volume: 1,500 liters Fresh Concrete Volume: 1,250 liters Compacted Concrete Volume: 1,000 liters Engine Power: 37 kW Side Body Wear Plates: 15 mm Hardox Main Body Wear Plates: 15 mm Ni Hard Mixing Arm Wear Plates: 25 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-2 Loading Capacity: 3,000 liters Fresh Concrete Volume: 2,500 liters Compacted Concrete Volume: 2,000 liters Engine Power: 2 x 37 kW Side Body Wear Plates: 15 mm Hardox Main Body Wear Plates: 20 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-3 Loading Volume: 4,500 liters Fresh Concrete Volume: 3,750 liters Compacted Concrete Volume: 3,000 liters Engine Power: 2 x 55 kW Side Body Wear Plates: 20 mm Hardox Main Body Wear Plates: 20 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-4 Loading Volume: 6,000 liters Fresh Concrete Volume: 5,000 liters Compacted Concrete Volume: 4,000 liters Engine Power: 2 x 75 kW Side Body Wear Plates: 25 mm Ni-Hard Main Body Wear Plates: 25 mm Ni-Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-5 Godpfxexpi Ute Aayjkb Loading Volume: 7,500 liters Fresh Concrete Volume: 6,250 liters Compacted Concrete Volume: 5,000 liters Engine Power: 2 x 90 kW Side Body Wear Plates: 25 mm Ni Hard Main Body Wear Plates: 30 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available

Condition: new, Year of construction: 2026, operating hours: 5 h, Equipment: AdBlue, Arjes Impaktor 250 EVO II Shredder – Ideal for construction debris, concrete, bulky materials, asphalt, roofing felt, wood, mixed waste, biomass, rubber, plastic, ceramics, photovoltaic panels, and other materials. The basic machine price includes (already contained): - Complete shaft set with bearing cassette of choice (for concrete, wood, biomass, mixed waste, others) - Sprinklers for dust reduction Gedoyf Ni Dspfx Aayskb - Cross-belt permanent magnet (separates steel elements to the side) - Side discharge hopper under the magnet - Shaping bars

Condition: new, Year of construction: 2025, Screens for four-shaft shredders Models: RS, ZM, ZMK, GZ Type: SB-450, SB-760, SB-960, SB-1030, SB-1230 Year: 2025 New / Ready for Operation We are a manufacturer of replacement blades and spare parts for crushers and shredders. Gedpfx Aaexn Nameyskb Please provide the manufacturer's name and machine type when inquiring.

Condition: used, Twin Shaft Mixer, Twin Shaft Powder Mixer, Twin Shaft Feed Mixer, Halvor Forberg 2000LH, Used Machine Manufacturer: Halvor Forberg Gkedpfx Aaext Nuzsysb Model: 2000LH Overall dimensions: 2660 x 3280 x 2450 mm Mixing paddle size: 375 x 330 mm Mixer type: Twin shaft Bottom plate: Openable – product discharge is pneumatic

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Net price: 88,900 PLN Gkodpfx Aaszw Duwsyob Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: new, Year of construction: 2026, The item for sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40150 Main motor power: 90 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1500 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 94 pieces Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, with the option of mounting a second row of fixed knives (upper) depending on the waste being processed Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen, assisted by two actuators Gedpfx Aaezlh Dfeyokb The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines